update of enhance one round

[Cipher_code.git] / Arduino / libraries / Firmata / examples / StandardFirmataBLE / bleConfig.h

diff --git a/Arduino/libraries/Firmata/examples/StandardFirmataBLE/bleConfig.h b/Arduino/libraries/Firmata/examples/StandardFirmataBLE/bleConfig.h
index da5a5f20c45c3f973eb3d896e1aa654735608dfd..412bb8499ab397fdf2fd3be875601dc14bb697b3 100644 (file)
--- a/Arduino/libraries/Firmata/examples/StandardFirmataBLE/bleConfig.h
+++ b/Arduino/libraries/Firmata/examples/StandardFirmataBLE/bleConfig.h
@@ -5,13 +5,14 @@
  * need a unique ble local name (see below). If you are using another supported BLE board or shield,
  * follow the instructions for the specific board or shield below.
  *
  * need a unique ble local name (see below). If you are using another supported BLE board or shield,
  * follow the instructions for the specific board or shield below.
  *

- * Make sure you have the Intel Curie Boards package v1.0.6 or higher installed via the Arduino
+ * Make sure you have the Intel Curie Boards package v2.0.2 or higher installed via the Arduino

  * Boards Manager.
  *
  * Supported boards and shields:
  * - Arduino 101 (recommended)
  * - RedBearLab BLE Shield (v2)  ** to be verified **
  * - RedBearLab BLE Nano ** works with modifications **
  * Boards Manager.
  *
  * Supported boards and shields:
  * - Arduino 101 (recommended)
  * - RedBearLab BLE Shield (v2)  ** to be verified **
  * - RedBearLab BLE Nano ** works with modifications **

+ * - Adafruit Feather M0 Bluefruit LE

  *
  *================================================================================================*/
 
  *
  *================================================================================================*/
 


@@ -19,6 +20,22 @@
 // within the same physical space
 #define FIRMATA_BLE_LOCAL_NAME "FIRMATA"
 
 // within the same physical space
 #define FIRMATA_BLE_LOCAL_NAME "FIRMATA"
 

+/*
+ * Arduino 101
+ *
+ * Make sure you have the Intel Curie Boards package v2.0.2 or higher installed via the Arduino
+ * Boards Manager.
+ *
+ * Test script: https://gist.github.com/soundanalogous/927360b797574ed50e27
+ */
+#ifdef _VARIANT_ARDUINO_101_X_
+// After conversion to units of 1.25ms, both values must be between
+// 0x0006 (7.5ms) and 0x0c80 (4s)
+#define FIRMATA_BLE_MIN_INTERVAL 8  // ( 8 * 1000) / 1250 == 0x06 -> 7.5ms
+#define FIRMATA_BLE_MAX_INTERVAL 30 // (30 * 1000) / 1250 == 0x18 -> 30ms
+#endif
+
+

 /*
  * RedBearLab BLE Shield
  *
 /*
  * RedBearLab BLE Shield
  *


@@ -36,15 +53,50 @@
 //#define REDBEAR_BLE_SHIELD
 
 #ifdef REDBEAR_BLE_SHIELD
 //#define REDBEAR_BLE_SHIELD
 
 #ifdef REDBEAR_BLE_SHIELD

-#include <SPI.h>
-#include <BLEPeripheral.h>
-#include "utility/BLEStream.h"
-

 #define BLE_REQ  9
 #define BLE_RDY  8
 #define BLE_RST  4 // 4 or 7 via jumper on shield
 #define BLE_REQ  9
 #define BLE_RDY  8
 #define BLE_RST  4 // 4 or 7 via jumper on shield

+#endif

 
 

-BLEStream stream(BLE_REQ, BLE_RDY, BLE_RST);
+
+/*
+ * Adafruit Feather M0 Bluefruit LE
+ *
+ * If you are using an Adafruit Feather M0 Bluefruit LE, uncomment the define below.
+ * This configuration should also work with other Bluefruit LE boards/modules that communicate
+ * with the nRF51822 via SPI (e.g. Bluefruit LE SPI Friend, Bluefruit LE Shield), although
+ * you may need to change the values of BLE_SPI_CS, BLE_SPI_IRQ, and/or BLE_SPI_RST below.
+ *
+ * You will need to install a lightly-modified version of the Adafruit BluefruitLE nRF51
+ * package, available at:
+ * https://github.com/cstawarz/Adafruit_BluefruitLE_nRF51/archive/firmata_fixes.zip
+ */
+//#define BLUEFRUIT_LE_SPI
+
+#ifdef BLUEFRUIT_LE_SPI
+// Both values must be between 10ms and 4s
+#define FIRMATA_BLE_MIN_INTERVAL 10 // 10ms
+#define FIRMATA_BLE_MAX_INTERVAL 20 // 20ms
+
+#define BLE_SPI_CS   8
+#define BLE_SPI_IRQ  7
+#define BLE_SPI_RST  4
+#endif
+
+
+/*
+ * Generic settings
+ */
+#if !defined(FIRMATA_BLE_MIN_INTERVAL) && !defined(FIRMATA_BLE_MAX_INTERVAL)
+// These values apply to all devices using the Arduino BLEPeripheral library
+// with a Nordic nRF8001 or nRF51822.  Both values must be between
+// 0x0006 (7.5ms) and 0x0c80 (4s).
+#define FIRMATA_BLE_MIN_INTERVAL 0x0006 // 7.5ms (7.5 / 1.25)
+#define FIRMATA_BLE_MAX_INTERVAL 0x0018 // 30ms (30 / 1.25)
+#endif
+
+#if !defined(FIRMATA_BLE_TXBUFFER_FLUSH_INTERVAL)
+#define FIRMATA_BLE_TXBUFFER_FLUSH_INTERVAL 30 // 30ms

 #endif
 
 
 #endif
 
 


@@ -52,21 +104,25 @@ BLEStream stream(BLE_REQ, BLE_RDY, BLE_RST);
  * END BLE CONFIGURATION - you should not need to change anything below this line
  *================================================================================================*/
 
  * END BLE CONFIGURATION - you should not need to change anything below this line
  *================================================================================================*/
 

-/*
- * Arduino 101
- *
- * Make sure you have the Intel Curie Boards package v1.0.6 or higher installed via the Arduino
- * Boards Manager.
- *
- * Test script: https://gist.github.com/soundanalogous/927360b797574ed50e27
- */

 #ifdef _VARIANT_ARDUINO_101_X_
 #ifdef _VARIANT_ARDUINO_101_X_

-#include <CurieBLE.h>

 #include "utility/BLEStream.h"
 BLEStream stream;
 #endif
 
 
 #include "utility/BLEStream.h"
 BLEStream stream;
 #endif
 
 

+#ifdef REDBEAR_BLE_SHIELD
+#include <SPI.h>
+#include "utility/BLEStream.h"
+BLEStream stream(BLE_REQ, BLE_RDY, BLE_RST);
+#endif
+
+
+#ifdef BLUEFRUIT_LE_SPI
+#include "utility/BluefruitLE_SPI_Stream.h"
+BluefruitLE_SPI_Stream stream(BLE_SPI_CS, BLE_SPI_IRQ, BLE_SPI_RST);
+#endif
+
+

 /*
  * RedBearLab BLE Nano (with default switch settings)
  *
 /*
  * RedBearLab BLE Nano (with default switch settings)
  *


@@ -81,7 +137,6 @@ BLEStream stream;
  * the pins are currently mapped in Firmata only for the default (factory) jumper settings.
  */
 // #ifdef BLE_NANO
  * the pins are currently mapped in Firmata only for the default (factory) jumper settings.
  */
 // #ifdef BLE_NANO

-// #include <BLEPeripheral.h>

 // #include "utility/BLEStream.h"
 // BLEStream stream;
 // #endif
 // #include "utility/BLEStream.h"
 // BLEStream stream;
 // #endif


@@ -96,7 +151,6 @@ BLEStream stream;
  */
 // #if defined(BLEND_MICRO) || defined(BLEND)
 // #include <SPI.h>
  */
 // #if defined(BLEND_MICRO) || defined(BLEND)
 // #include <SPI.h>

-// #include <BLEPeripheral.h>

 // #include "utility/BLEStream.h"
 
 // #define BLE_REQ  6
 // #include "utility/BLEStream.h"
 
 // #define BLE_REQ  6


@@ -109,4 +163,6 @@ BLEStream stream;
 
 #if defined(BLE_REQ) && defined(BLE_RDY) && defined(BLE_RST)
 #define IS_IGNORE_BLE_PINS(p) ((p) == BLE_REQ || (p) == BLE_RDY || (p) == BLE_RST)
 
 #if defined(BLE_REQ) && defined(BLE_RDY) && defined(BLE_RST)
 #define IS_IGNORE_BLE_PINS(p) ((p) == BLE_REQ || (p) == BLE_RDY || (p) == BLE_RST)

+#elif defined(BLE_SPI_CS) && defined(BLE_SPI_IRQ) && defined(BLE_SPI_RST)
+#define IS_IGNORE_BLE_PINS(p) ((p) == BLE_SPI_CS || (p) == BLE_SPI_IRQ || (p) == BLE_SPI_RST)

 #endif
 #endif