\usepackage{multirow}\r
\usepackage{graphicx}\r
\usepackage{url}\r
+\usepackage{dsfont}\r
+\r
\r
\def\newblock{\hskip .11em plus .33em minus .07em}\r
\r
\section{Convergence results}\r
\label{sec:04}\r
\r
+%%NEW\r
+\r
+\r
+We suppose in this section that GMRES($m$) is used as solver in the TSIRM algorithm applied on a complex matrix $A$.\r
+Let us denote $A^\ast$ the conjugate transpose of $A$, and let $\mathfrak{R}(A)=\dfrac{1}{2} \left( A + A^\ast\right)$, $\mathfrak{I}(A)=\dfrac{1}{2i} \left( A - A^\ast\right)$. \r
+\r
+\subsection{$\mathfrak{R}(A)$ is positive}\r
+\r
+\begin{proposition}\r
+\label{positiveConvergent}\r
+If $\mathfrak{R}(A)$ is positive, then the TSIRM algorithm is convergent.\r
+\end{proposition}\r
+\r
\r
-We can now claim that,\r
+\begin{proof}\r
+If $\mathfrak{R}(A)$ is positive, then even if $A$ is complex, it is possible to state that \r
+the GMRES algorithm is convergent, see, \emph{e.g.},~\cite{Huang89}. In particular, its residual norm\r
+decreases to zero.\r
+\r
+At each iterate of the TSIRM algorithm, either a GMRES iteration is realized or a least square\r
+resolution (to find the minimum of $||b-Ax||_2$ is achieved on the linear span of the iterated approximation vectors \r
+$span\left(x_{k-s+1}, x_{k-s}+2, \hdots, x_{k} \right)$\r
+of the last GMRES stage,\r
+where\r
+$\operatorname{span}(S) = \left \{ {\sum_{i=1}^k \lambda_i v_i \Big| k \in \mathbb{N}, v_i \in S, \lambda _i \in \mathbb{R}} \right \}$.\r
+\r
+Obviously, the minimum of $||b-Ax||_2$ on the set $span\left(x_{k-s+1}, x_{k-s}+2, \hdots, x_{k} \right)$ \r
+is lower than or equal to $||b-Ax_k||_2$, which is the last obtained GMRES-residual norm. So we can\r
+conclude that the intermediate stage of least square resolution inserted into the GMRES algorithm\r
+does not break the decreasing to zero of the GMRES-residual norm. \r
+\r
+In other words, the TSIRM algorithm is convergent.\r
+\end{proof}\r
+\r
+\r
+Regarding the convergence speed, we can claim that,\r
\begin{proposition}\r
\label{prop:saad}\r
-If $A$ is either a definite positive or a positive matrix and GMRES($m$) is used as a solver, then the TSIRM algorithm is convergent. \r
+If $A$ is a positive matrix, then the convergence of the \r
+TSIRM algorithm is linear. \r
\r
-Furthermore, let $r_k$ be the\r
-$k$-th residue of TSIRM, then\r
+Furthermore, let $r_k$ be the $k$-th residue of TSIRM, then\r
we have the following boundaries:\r
-\begin{itemize}\r
-\item when $A$ is positive:\r
\begin{equation}\r
||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0|| ,\r
\end{equation}\r
-where $M$ is the symmetric part of $A$, $\alpha = \lambda_{min}(M)^2$ and $\beta = \lambda_{max}(A^T A)$;\r
-\item when $A$ is positive definite:\r
-\begin{equation}\r
-\|r_k\| \leq \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_0\|.\r
-\end{equation}\r
-\end{itemize}\r
-%In the general case, where A is not positive definite, we have\r
-%$\|r_n\| \le \inf_{p \in P_n} \|p(A)\| \le \kappa_2(V) \inf_{p \in P_n} \max_{\lambda \in \sigma(A)} |p(\lambda)| \|r_0\|, .$\r
+where $M$ is the symmetric part of $A$, $\alpha = \lambda_{min}(M)^2$ and $\beta = \lambda_{max}(A^T A)$.\r
\end{proposition}\r
\r
\begin{proof}\r
-Let us first recall that the residue is under control when considering the GMRES algorithm on a positive definite matrix, and it is bounded as follows:\r
-\begin{equation*}\r
-\|r_k\| \leq \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{k/2} \|r_0\| .\r
-\end{equation*}\r
-Additionally, when $A$ is a positive real matrix with symmetric part $M$, then the residual norm provided at the $m$-th step of GMRES satisfies:\r
+Let us first recall that, when $A$ is a positive real matrix with symmetric part $M$, then the residual norm provided at the $m$-th step of GMRES satisfies:\r
\begin{equation*}\r
||r_m|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_0|| ,\r
\end{equation*}\r
-where $\alpha$ and $\beta$ are defined as in Proposition~\ref{prop:saad}, which proves \r
-the convergence of GMRES($m$) for all $m$ under such assumptions regarding $A$.\r
+where $\alpha$ and $\beta$ are defined as in Proposition~\ref{prop:saad}.\r
These well-known results can be found, \emph{e.g.}, in~\cite{Saad86}.\r
\r
We will now prove by a mathematical induction that, for each $k \in \mathbb{N}^\ast$, \r
-$||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{mk}{2}} ||r_0||$ when $A$ is positive, and $\|r_k\| \leq \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_0\|$ when $A$ is positive definite.\r
+$||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{mk}{2}} ||r_0||$ when $A$ is positive.\r
\r
The base case is obvious, as for $k=1$, the TSIRM algorithm simply consists in applying GMRES($m$) once, leading to a new residual $r_1$ that follows the inductive hypothesis due to the results recalled above.\r
\r
-Suppose now that the claim holds for all $m=1, 2, \hdots, k-1$, that is, $\forall m \in \{1,2,\hdots, k-1\}$, $||r_m|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$ in the positive case, and $\|r_k\| \leq \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_0\|$ in the definite positive one.\r
+Suppose now that the claim holds for all $m=1, 2, \hdots, k-1$, that is, $\forall m \in \{1,2,\hdots, k-1\}$, $||r_m|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$.\r
We will show that the statement holds too for $r_k$. Two situations can occur:\r
\begin{itemize}\r
-\item If $k \not\equiv 0 ~(\textrm{mod}\ m)$, then the TSIRM algorithm consists in executing GMRES once. In that case and by using the inductive hypothesis, we obtain either $||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_{k-1}||\leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$ if $A$ is positive, or $\|r_k\| \leqslant \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{m/2} \|r_{k-1}\|$ $\leqslant$ $\left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_{0}\|$ in the positive definite case.\r
+\item If $k \not\equiv 0 ~(\textrm{mod}\ m)$, then the TSIRM algorithm consists in executing GMRES once. In that case and by using the inductive hypothesis, we obtain either $||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_{k-1}||\leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$.\r
\item Else, the TSIRM algorithm consists in two stages: a first GMRES($m$) execution leads to a temporary $x_k$ whose residue satisfies:\r
-\begin{itemize}\r
-\item $||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_{k-1}||\leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$ in the positive case, \r
-\item $\|r_k\| \leqslant \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{m/2} \|r_{k-1}\|$ $\leqslant$ $\left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_{0}\|$ in the positive definite one,\r
-\end{itemize}\r
+$$||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_{k-1}||\leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$$\r
and a least squares resolution.\r
Let $\operatorname{span}(S) = \left \{ {\sum_{i=1}^k \lambda_i v_i \Big| k \in \mathbb{N}, v_i \in S, \lambda _i \in \mathbb{R}} \right \}$ be the linear span of a set of real vectors $S$. So,\\\r
$\min_{\alpha \in \mathbb{R}^s} ||b-R\alpha ||_2 = \min_{\alpha \in \mathbb{R}^s} ||b-AS\alpha ||_2$\r
& \leqslant \min_{\lambda \in \mathbb{R}} ||b-\lambda Ax_{k} ||_2\\\r
& \leqslant ||b-Ax_{k}||_2\\\r
& = ||r_k||_2\\\r
-& \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||, \textrm{ if $A$ is positive,}\\\r
-& \leqslant \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_{0}\|, \textrm{ if $A$ is}\\\r
-& \textrm{positive definite,} \r
+& \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||, \\\r
\end{array}$\r
\end{itemize}\r
which concludes the induction and the proof.\r
\end{proof}\r
\r
+\r
+\r
+\subsection{$\mathfrak{R}(A)$ is positive definite}\r
+\r
+\begin{proposition}\r
+\label{prop2}\r
+Convergence of the TSIRM algorithm is at least linear when $\mathfrak{R}(A)$ is \r
+positive definite. Furthermore, the rate of convergence is lower \r
+than $$\min\left( \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{m}{2}}; \r
+\left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{m}{2}}\right) ,$$\r
+where ${\lambda_{min}^{X}}$ (resp. ${\lambda_{max}^{X}}$) is the lowest (resp. largest) eigenvalue of matrix $X$.\r
+\end{proposition}\r
+\r
+\r
+\begin{proof}\r
+If $\mathfrak{R}(A)$ is positive definite, then it is positive, and so the TSIRM algorithm\r
+is convergent due to Proposition~\ref{positiveConvergent}.\r
+\r
+Furthermore, as stated in the proof of Proposition~\ref{positiveConvergent}, the GMRES residue is under control \r
+when $\mathfrak{R}(A)$ is positive. More precisely, it has been proven in the literature that the residual norm \r
+provided at the $m$-th step of GMRES satisfies:\r
+\begin{enumerate}\r
+\item $||r_m|| \leqslant \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{mk}{2}} ||r_0||$, see, \emph{e.g.},~\cite{citeulike:2951999}, \r
+\item $||r_m|| \leqslant \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{mk}{2}} ||r_0||$, see~\cite{ANU:137201},\r
+\end{enumerate}\r
+which proves the convergence of GMRES($m$) for all $m$ under such assumptions regarding $A$.\r
+\r
+We will now prove by a mathematical induction, and following the same canvas than in the proof of Prop.~\ref{positiveConvergent}, that: for each $k \in \mathbb{N}^\ast$, the TSIRM-residual norm satisfies\r
+\begin{equation}\r
+\label{induc}\r
+\begin{array}{ll}\r
+||r_k|| \leqslant & \min\left( \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{m}{2}}; \right. \\\r
+& \left. \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{m}{2}}\right) ||r_0||\r
+\end{array}\r
+\end{equation}\r
+when $A$ is positive definite.\r
+\r
+\r
+The base case is obvious, as for $k=1$, the TSIRM algorithm simply consists in applying GMRES($m$) once, leading to a new residual $r_1$ that follows the inductive hypothesis due to the results recalled in the items listed above.\r
+\r
+Suppose now that the claim holds for all $u=1, 2, \hdots, k-1$, that is, $\forall u \in \{1,2,\hdots, k-1\}$, $||r_u|| \leqslant \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{mu}{2}} ||r_0||$.\r
+We will show that the statement holds too for $r_k$. Two situations can occur:\r
+\begin{itemize}\r
+\item If $k \not\equiv 0 ~(\textrm{mod}\ m)$, then the TSIRM algorithm consists in executing GMRES once. In that case and by using the inductive hypothesis, we obtain \r
+$||r_k|| \leqslant \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{m}{2}} \leqslant \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{mk}{2}} ||r_0||$, due to~\cite{citeulike:2951999}. Furthermore, we have too that: $||r_k|| \leqslant \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{m}{2}} ||r_{k-1}|| \leqslant \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{mk}{2}} ||r_0||$, as proven in~\cite{ANU:137201} and by using the inductive hypothesis. So we can conclude that \r
+$$\begin{array}{ll}||r_k|| \leqslant & \min\left( \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{mk}{2}}; \right. \\\r
+& \left. \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{mk}{2}}\right) \times ||r_0|| \r
+\end{array}.$$\r
+\r
+\item Else, the TSIRM algorithm consists in two stages: a first GMRES($m$) execution leads to a temporary $x_k$ whose residue satisfies, following the previous item:\r
+$$\begin{array}{ll}\r
+||r_k|| & \leqslant \min\left( \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{m}{2}}; \right. \\\r
+& \left. \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{m}{2}}\right) \times ||r_{k-1}||\\\r
+ & \leqslant \min\left( \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{mk}{2}}; \right. \\\r
+& \left. \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{mk}{2}}\right) \times ||r_0|| \r
+\end{array}$$\r
+and the least squares resolution of $\min_{\alpha \in \mathbb{R}^s} ||b-R\alpha ||_2$.\r
+\r
+Let $\operatorname{span}(S) = \left \{ {\sum_{i=1}^k \lambda_i v_i \Big| k \in \mathbb{N}, v_i \in S, \lambda _i \in \mathbb{R}} \right \}$ be the linear span of a set of real vectors $S$, as defined previously. So,\\\r
+$\min_{\alpha \in \mathbb{R}^s} ||b-R\alpha ||_2 = \min_{\alpha \in \mathbb{R}^s} ||b-AS\alpha ||_2$\r
+\r
+$\begin{array}{ll}\r
+& = \min_{x \in span\left(S_{k-s+1}, S_{k-s+2}, \hdots, S_{k} \right)} ||b-AS\alpha ||_2\\\r
+& = \min_{x \in span\left(x_{k-s+1}, x_{k-s}+2, \hdots, x_{k} \right)} ||b-AS\alpha ||_2\\\r
+& \leqslant \min_{x \in span\left( x_{k} \right)} ||b-Ax ||_2\\\r
+& \leqslant \min_{\lambda \in \mathbb{R}} ||b-\lambda Ax_{k} ||_2\\\r
+& \leqslant ||b-Ax_{k}||_2\\\r
+& = ||r_k||_2\\\r
+& \leqslant \min\left( \left(1- \dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{ \lambda_{min}^{\mathfrak{R}(A)} \lambda_{max}^{\mathfrak{R}(A)} + {\lambda_{max}^{\mathfrak{I}(A)}}^2}\right)^{\frac{mk}{2}}; \right. \\\r
+& \left. \left(1-\dfrac{{\lambda_{min}^{\mathfrak{R}(A)}}^2}{||A||^2}\right)^{\frac{mk}{2}}\right) \times ||r_0|| \r
+\end{array} .$\r
+\end{itemize}\r
+due to the inductive hypothesis. \r
+So the statement of Equation~\eqref{induc} holds too for the $k$-th iterate, which concludes the induction and the proof.\r
+\end{proof}\r
+\r
+\subsection{A last linear convergence}\r
+\r
+\r
+\begin{proposition}\r
+Let us define the field of values of $A$ by \r
+$$\mathfrak{F}(A) = \left\{ \dfrac{x^\ast A x}{x^\ast x}, x \in \mathds{C}^n\setminus \{0\} \right\} .$$\r
+\r
+Then if $\mathfrak{F}(A)$ is included into a closed ball of radius $r$ and center $c$,\r
+which does not contain the origin, then the convergence of the TSIRM algorithm is at least linear. \r
+\r
+More precisely, the rate of convergence is lower \r
+than $2 \dfrac{r}{|c|}$.\r
+\end{proposition}\r
+\r
+\begin{proof}\r
+This inequality comes from the fact that, in the conditions of the proposition, the GMRES residue \r
+satisfies the inequality: $|r_k| \leqslant 2 \dfrac{r}{|c|}^k |r_0|$. An induction inspired by\r
+the proofs of Propositions~\ref{prop:saad} and~\ref{prop2} can transfer this inequality to the\r
+TSIRM residue.\r
+\end{proof}\r
+\r
+\r
+\r
Remark that a similar proposition can be formulated at each time\r
the given solver satisfies an inequality of the form $||r_n|| \leqslant \mu^n ||r_0||$,\r
with $|\mu|<1$. Furthermore, it is \emph{a priori} possible in some particular cases \r
regarding $A$, \r
that the proposed TSIRM converges while the GMRES($m$) does not.\r
\r
+%%ENDNEW\r
+\r
+\r
%%%*********************************************************\r
%%%*********************************************************\r
\section{Experiments using PETSc}\r
are not available. In our experiments, we have tested different kinds of\r
preconditioners, but as it is not the subject of this paper, we will not\r
present results with many preconditioners. In practice, we have chosen to use a\r
-multigrid (mg) and successive over-relaxation (sor). For further details on the\r
+multigrid (MG) and successive over-relaxation (SOR). For further details on the\r
preconditioners in PETSc, readers are referred to~\cite{petsc-web-page}.\r
\r
\r
nb. cores & precond & \multicolumn{2}{c|}{FGMRES} & \multicolumn{2}{c|}{TSIRM CGLS} & \multicolumn{2}{c|}{TSIRM LSQR} & best gain \\ \r
\cline{3-8}\r
& & Time & \# Iter. & Time & \# Iter. & Time & \# Iter. & \\\hline \hline\r
- 2,048 & mg & 403.49 & 18,210 & 73.89 & 3,060 & 77.84 & 3,270 & 5.46 \\\r
- 2,048 & sor & 745.37 & 57,060 & 87.31 & 6,150 & 104.21 & 7,230 & 8.53 \\\r
- 4,096 & mg & 562.25 & 25,170 & 97.23 & 3,990 & 89.71 & 3,630 & 6.27 \\\r
- 4,096 & sor & 912.12 & 70,194 & 145.57 & 9,750 & 168.97 & 10,980 & 6.26 \\\r
- 8,192 & mg & 917.02 & 40,290 & 148.81 & 5,730 & 143.03 & 5,280 & 6.41 \\\r
- 8,192 & sor & 1,404.53 & 106,530 & 212.55 & 12,990 & 180.97 & 10,470 & 7.76 \\\r
- 16,384 & mg & 1,430.56 & 63,930 & 237.17 & 8,310 & 244.26 & 7,950 & 6.03 \\\r
- 16,384 & sor & 2,852.14 & 216,240 & 418.46 & 21,690 & 505.26 & 23,970 & 6.82 \\\r
+ 2,048 & MG & 403.49 & 18,210 & 73.89 & 3,060 & 77.84 & 3,270 & 5.46 \\\r
+ 2,048 & SOR & 745.37 & 57,060 & 87.31 & 6,150 & 104.21 & 7,230 & 8.53 \\\r
+ 4,096 & MG & 562.25 & 25,170 & 97.23 & 3,990 & 89.71 & 3,630 & 6.27 \\\r
+ 4,096 & SOR & 912.12 & 70,194 & 145.57 & 9,750 & 168.97 & 10,980 & 6.26 \\\r
+ 8,192 & MG & 917.02 & 40,290 & 148.81 & 5,730 & 143.03 & 5,280 & 6.41 \\\r
+ 8,192 & SOR & 1,404.53 & 106,530 & 212.55 & 12,990 & 180.97 & 10,470 & 7.76 \\\r
+ 16,384 & MG & 1,430.56 & 63,930 & 237.17 & 8,310 & 244.26 & 7,950 & 6.03 \\\r
+ 16,384 & SOR & 2,852.14 & 216,240 & 418.46 & 21,690 & 505.26 & 23,970 & 6.82 \\\r
\hline\r
\r
\end{tabular}\r
-\caption{Comparison of FGMRES and TSIRM with FGMRES for example ex15 of PETSc/KSP with two preconditioners (mg and sor) having 25,000 components per core on Juqueen ($\epsilon_{tsirm}=1e-3$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$), time is expressed in seconds.}\r
+\caption{Comparison of FGMRES and TSIRM with FGMRES for example ex15 of PETSc/KSP with two preconditioners (MG and SOR) having 25,000 components per core on Juqueen ($\epsilon_{tsirm}=1e-3$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$), time is expressed in seconds.}\r
\label{tab:03}\r
\end{center}\r
\end{table*}\r
Table~\ref{tab:03} shows the execution times and the number of iterations of\r
example ex15 of PETSc on the Juqueen architecture. Different numbers of cores\r
are studied ranging from 2,048 up-to 16,383 with the two preconditioners {\it\r
- mg} and {\it sor}. For those experiments, the number of components (or\r
+ MG} and {\it SOR}. For those experiments, the number of components (or\r
unknowns of the problems) per core is fixed at 25,000, also called weak\r
scaling. This number can seem relatively small. In fact, for some applications\r
that need a lot of memory, the number of components per processor requires\r
\r
%%NEW\r
\r
+{\bf example ex45/ksp à décrire et commenter en montrant que hypre est pourri avec cet exemple}\r
+\r
+\begin{table*}[htbp]\r
+\begin{center}\r
+\begin{tabular}{|r|r|r|r|r|r|r|r|} \r
+\hline\r
+\r
+ nb. cores & \multicolumn{2}{c|}{FGMRES/ASM} & \multicolumn{2}{c|}{TSIRM CGLS/ASM} & gain& \multicolumn{2}{c|}{FGMRES/HYPRE} \\ \r
+\cline{2-5} \cline{7-8}\r
+ & Time & \# Iter. & Time & \# Iter. & & Time & \# Iter. \\\hline \hline\r
+ 512 & 5.54 & 685 & 2.5 & 570 & 2.21 & 128.9 & 9 \\\r
+ 2048 & 14.95 & 1,560 & 4.32 & 746 & 3.48 & 335.7 & 9 \\\r
+ 4096 & 25.13 & 2,369 & 5.61 & 859 & 4.48 & >1000 & -- \\\r
+ 8192 & 44.35 & 3,197 & 7.6 & 1083 & 5.84 & >1000 & -- \\\r
+\r
+\hline\r
+\r
+\end{tabular}\r
+\caption{Comparison of FGMRES and TSIRM for ex45 of PETSc/KSP with two preconditioner (ASM and HYPRE) having 5,000 components per core on Curie ($\epsilon_{tsirm}=1e-10$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$,$\epsilon_{ls}=1e-40$), time is expressed in seconds.}\r
+\label{tab:06}\r
+\end{center}\r
+\end{table*}\r
+\r
+\r
\subsection{Parallel nonlinear problems}\r
\r
With PETSc, linear solvers are used inside nonlinear solvers. The SNES\r
(Scalable Nonlinear Equations Solvers) module in PETSc implements easy to use\r
methods, like Newton-type, quasi-Newton or full approximation scheme (FAS)\r
-multigrid to solve systems of nonlinears equations. As the SNES is based on the\r
+multigrid to solve systems of nonlinears equations. As SNES is based on the\r
Krylov methods of PETSc, it is interesting to investigate if the TSIRM method is\r
-also efficient and scalable with non linear problems.\r
-\r
-\r
-\r
+also efficient and scalable with non linear problems. In PETSc, some examples\r
+are provided. An important criteria is the scalability of the initial code with\r
+classical solvers. Consequently, we have chosen two of these examples: ex14 and\r
+ex20. In ex14, the code solves the Bratu (SFI - solid fuel ignition) nonlinear\r
+partial difference equations in 3 dimension. In ex20, the code solves a 3\r
+dimension radiative transport test problem. For more details on these examples,\r
+interested readers are invited to see the code in the PETSc examples. For both\r
+these examples, a weak scaling case is chosen where processors have\r
+approximately a number of components equals to 100,000.\r
+\r
+In Table~\ref{tab:07} we report the result of our experiments for the example\r
+ex14 with the block Jacobi preconditioner. For TSIRM the CGLS algorithm is used\r
+to solve the minimization step. In this table, we can see that the number of\r
+iterations used by the linear solver is smaller with TSIRM compared with FGMRES.\r
+Consequently the execution times are smaller with TSIRM. The gain between TSIRM\r
+and FGMRES is around 6 and 7. The parameters of TSIRM are expressed in the\r
+caption of the table.\r
\r
\begin{table*}[htbp]\r
\begin{center}\r
\begin{tabular}{|r|r|r|r|r|r|} \r
\hline\r
\r
- nb. cores & \multicolumn{2}{c|}{FGMRES/BJAC} & \multicolumn{2}{c|}{TSIRM CGLS/BJAC} & gain \\ \r
+ nb. cores & \multicolumn{2}{c|}{FGMRES/BJAC} & \multicolumn{2}{c|}{TSIRM CGLS/BJAC} & gain \\ \r
\cline{2-5}\r
- & Time & \# Iter. & Time & \# Iter. & \\\hline \hline\r
- 1024 & 667.92 & 48,732 & 81.65 & 5,087 & 8.18 \\\r
- 2048 & 966.87 & 77,177 & 90.34 & 5,716 & 10.70\\\r
- 4096 & 1,742.31 & 124,411 & 119.21 & 6,905 & 14.61\\\r
- 8192 & 2,739.21 & 187,626 & 168.9 & 9,000 & 16.22\\\r
+ & Time & \# Iter. & Time & \# Iter. & \\\hline \hline\r
+ 1,024 & 159.52 & 11,584 & 26.34 & 1,563 & 6.06 \\\r
+ 2,048 & 226.24 & 16,459 & 37.23 & 2,248 & 6.08\\\r
+ 4,096 & 391.21 & 27,794 & 50.93 & 2,911 & 7.69\\\r
+ 8,192 & 543.23 & 37,770 & 79.21 & 4,324 & 6.86 \\\r
\r
\hline\r
\r
\end{tabular}\r
-\caption{Comparison of FGMRES and TSIRM for ex20 of PETSc/SNES with a Block Jacobi preconditioner having 100,000 components per core on Curie ($\epsilon_{tsirm}=1e-10$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$), time is expressed in seconds.}\r
+\caption{Comparison of FGMRES and TSIRM for ex14 of PETSc/SNES with a Block Jacobi preconditioner having 100,000 components per core on Curie ($\epsilon_{tsirm}=1e-10$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$), time is expressed in seconds.}\r
\label{tab:07}\r
\end{center}\r
\end{table*}\r
\r
+In Table~\cite{tab:08}, the results of the experiments with the example ex20 are\r
+reported. The block Jacobi preconditioner has also been used and CGLS to solve\r
+the minimization step for TSIRM. For this example, we can observ that the number\r
+of iterations for FMGRES increase drastically when the number of cores\r
+increases. With TSIRM, we can see that the number of iterations is initially\r
+very small compared to the FGMRES ones and when the number of cores increase,\r
+the number of iterations increases slighther with TSIRM than with FGMRES. For\r
+this example, the gain between TSIRM and FGMRES ranges between 8 with 1,024\r
+cores to more than 16 with 8,192 cores.\r
+\r
\begin{table*}[htbp]\r
\begin{center}\r
\begin{tabular}{|r|r|r|r|r|r|} \r
\hline\r
\r
- nb. cores & \multicolumn{2}{c|}{FGMRES/BJAC} & \multicolumn{2}{c|}{TSIRM CGLS/BJAC} & gain \\ \r
+ nb. cores & \multicolumn{2}{c|}{FGMRES/BJAC} & \multicolumn{2}{c|}{TSIRM CGLS/BJAC} & gain \\ \r
\cline{2-5}\r
- & Time & \# Iter. & Time & \# Iter. & \\\hline \hline\r
- 1024 & 159.52 & 11,584 & 26.34 & 1,563 & 6.06 \\\r
- 2048 & 226.24 & 16,459 & 37.23 & 2,248 & 6.08\\\r
- 4096 & 391.21 & 27,794 & 50.93 & 2,911 & 7.69\\\r
- 8192 & 543.23 & 37,770 & 79.21 & 4,324 & 6.86 \\\r
+ & Time & \# Iter. & Time & \# Iter. & \\\hline \hline\r
+ 1,024 & 667.92 & 48,732 & 81.65 & 5,087 & 8.18 \\\r
+ 2,048 & 966.87 & 77,177 & 90.34 & 5,716 & 10.70\\\r
+ 4,096 & 1,742.31 & 124,411 & 119.21 & 6,905 & 14.61\\\r
+ 8,192 & 2,739.21 & 187,626 & 168.9 & 9,000 & 16.22\\\r
\r
\hline\r
\r
\end{tabular}\r
-\caption{Comparison of FGMRES and TSIRM for ex14 of PETSc/SNES with a Block Jacobi preconditioner having 100,000 components per core on Curie ($\epsilon_{tsirm}=1e-10$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$), time is expressed in seconds.}\r
+\caption{Comparison of FGMRES and TSIRM for ex20 of PETSc/SNES with a Block Jacobi preconditioner having 100,000 components per core on Curie ($\epsilon_{tsirm}=1e-10$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$), time is expressed in seconds.}\r
\label{tab:08}\r
\end{center}\r
\end{table*}\r
\r
\r
+\r
+\r
+\r
+\r
+\r
+%%NEW\r
\subsection{Influence of parameters for TSIRM}\r
+In this section we present some experimental results in order to study the influence of some parameters on the TSIRM algorithm. We conducted experiments on $16$ cores to solve 3D problems of size $200,000$ components per core. We solved nonlinear problems token from examples of PETSc. We fixed some parameters of the TSIRM algorithm as follows: the nonlinear systems are solved with a precision of $10^{-8}$, block Jacobi preconditioner is used, the tolerance threshold $\epsilon_{tsirm}$ is $10^{-8}$ , the maximum number of iterations $max\_iter_{tsirm}$ is set to $10,000$ iterations, the FGMRES method is used as the inner solver with a tolerance threshold $\epsilon_{kryl}=10^{-10}$ and the least-squares problem is solved with a precision $\epsilon_{ls}=10^{-40}$ in the minimization process.\r
+\r
+%time mpirun ../ex48 -da_grid_x 147 -da_grid_y 147 -da_grid_z 147 -snes_rtol 1.e-8 -snes_monitor -ksp_type tsirm -ksp_pc_type bjacobi -pc_type ksp -ksp_tsirm_tol 1e-8 -ksp_tsirm_maxiter 10000 -ksp_ksp_type fgmres -ksp_tsirm_max_inner_iter 30 -ksp_tsirm_inner_restarts 30 -ksp_tsirm_inner_tol 1e-10 -ksp_tsirm_cgls 0 -ksp_tsirm_tol_ls 1.e-40 -ksp_tsirm_maxiter_ls 15 -ksp_tsirm_size_ls 10 \r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_cgls_iter_total}\r
+\caption{Number of total iterations using two different methods for the minimization: LSQR and CGLS.}\r
+\label{fig:cgls-iter} \r
+\end{figure}\r
+\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_cgls_time}\r
+\caption{Execution time in seconds using two different methods for the minimization: LSQR and CGLS.}\r
+\label{fig:cgls-time} \r
+\end{figure}\r
+\r
+%time mpirun ../ex35 -da_grid_x 147 -da_grid_y 147 -da_grid_z 147 -snes_rtol 1.e-8 -snes_monitor -ksp_type tsirm -ksp_pc_type bjacobi -pc_type ksp -ksp_tsirm_tol 1e-8 -ksp_tsirm_maxiter 10000 -ksp_ksp_type fgmres -ksp_tsirm_max_inner_iter 30 -ksp_tsirm_inner_restarts 38 -ksp_tsirm_inner_tol 1e-10 -ksp_tsirm_cgls 0 -ksp_tsirm_tol_ls 1.e-40 -ksp_tsirm_maxiter_ls 15 -ksp_tsirm_size_ls 10\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_inner_restarts_iter_total}\r
+\caption{Number of total iterations with variation of restarts in the inner solver FGMRES.}\r
+\label{fig:inner_restarts_iter_total} \r
+\end{figure}\r
+\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_inner_restarts_time}\r
+\caption{Execution time in seconds with variation of restarts in the inner solver FGMRES.}\r
+\label{fig:inner_restarts_time} \r
+\end{figure}\r
+\r
+%time mpirun ../ex14 -da_grid_x 147 -da_grid_y 147 -da_grid_z 147 -snes_rtol 1.e-8 -snes_monitor -ksp_type tsirm -ksp_pc_type bjacobi -pc_type ksp -ksp_tsirm_tol 1e-8 -ksp_tsirm_maxiter 10000 -ksp_ksp_type fgmres -ksp_tsirm_max_inner_iter 1000 -ksp_tsirm_inner_restarts 30 -ksp_tsirm_inner_tol 1e-10 -ksp_tsirm_cgls 0 -ksp_tsirm_tol_ls 1.e-40 -ksp_tsirm_maxiter_ls 15 -ksp_tsirm_size_ls 10\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_max_inner_iter}\r
+\caption{Number of total iterations with variation of number of inner iterations.}\r
+\label{fig:max_inner_iter} \r
+\end{figure}\r
+\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_max_inner_time}\r
+\caption{Execution time in seconds with variation of number of inner iterations.}\r
+\label{fig:max_inner_time} \r
+\end{figure}\r
+\r
+%time mpirun ../ex14 -da_grid_x 147 -da_grid_y 147 -da_grid_z 147 -snes_rtol 1.e-8 -snes_monitor -ksp_type tsirm -ksp_pc_type bjacobi -pc_type ksp -ksp_tsirm_tol 1e-8 -ksp_tsirm_maxiter 10000 -ksp_ksp_type fgmres -ksp_tsirm_max_inner_iter 30 -ksp_tsirm_inner_restarts 30 -ksp_tsirm_inner_tol 1e-10 -ksp_tsirm_cgls 0 -ksp_tsirm_tol_ls 1.e-40 -ksp_tsirm_maxiter_ls 5 -ksp_tsirm_size_ls 10\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_maxiter_ls_iter}\r
+\caption{Number of total iterations with variation of number of iterations in the minimization process.}\r
+\label{fig:maxiter_ls_iter} \r
+\end{figure}\r
+\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_maxiter_ls_time}\r
+\caption{Execution time in seconds with variation of number of iterations in the minimization process.}\r
+\label{fig:maxiter_ls_time} \r
+\end{figure}\r
+\r
+%time mpirun ../ex14 -da_grid_x 147 -da_grid_y 147 -da_grid_z 147 -snes_rtol 1.e-8 -snes_monitor -ksp_type tsirm -ksp_pc_type bjacobi -pc_type ksp -ksp_tsirm_tol 1e-8 -ksp_tsirm_maxiter 10000 -ksp_ksp_type fgmres -ksp_tsirm_max_inner_iter 30 -ksp_tsirm_inner_restarts 30 -ksp_tsirm_inner_tol 1e-10 -ksp_tsirm_cgls 0 -ksp_tsirm_tol_ls 1.e-40 -ksp_tsirm_maxiter_ls 15 -ksp_tsirm_size_ls 2\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_size_ls_iter}\r
+\caption{Number of total iterations with variation of the size of the least-squares problem in the minimization process.}\r
+\label{fig:size_ls_iter} \r
+\end{figure}\r
+\r
+\begin{figure}[htbp]\r
+\centering\r
+ \includegraphics[angle=-90,width=0.5\textwidth]{ksp_tsirm_size_ls_time}\r
+\caption{Execution time in seconds with variation of the size of the least-squares problem in the minimization process.}\r
+\label{fig:size_ls_time} \r
+\end{figure}\r
+\r
+%%ENDNEW\r
\r
\r
\r
