% quality.
-%\usepackage{eqparbox}
+\usepackage{eqparbox}
% Also of notable interest is Scott Pakin's eqparbox package for creating
% (automatically sized) equal width boxes - aka "natural width parboxes".
% Available at:
\hyphenation{op-tical net-works semi-conduc-tor}
-
+\usepackage[utf8]{inputenc}
+\usepackage[T1]{fontenc}
\usepackage{algorithm}
\usepackage{algpseudocode}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{multirow}
+\usepackage{graphicx}
\algnewcommand\algorithmicinput{\textbf{Input:}}
\algnewcommand\Input{\item[\algorithmicinput]}
\algnewcommand\algorithmicoutput{\textbf{Output:}}
\algnewcommand\Output{\item[\algorithmicoutput]}
-
+\newtheorem{proposition}{Proposition}
\begin{document}
%
% paper title
% can use linebreaks \\ within to get better formatting as desired
-\title{A Krylov two-stage algorithm to solve large sparse linear systems}
+\title{TSIRM: A Two-Stage Iteration with least-square Residual Minimization algorithm to solve large sparse linear systems}
%où
%\title{A two-stage algorithm with error minimization to solve large sparse linear systems}
%où
%\title{???}
+
+
+
% author names and affiliations
% use a multiple column layout for up to two different
% affiliations
-\author{\IEEEauthorblockN{Rapha\"el Couturier}
-\IEEEauthorblockA{Femto-ST Institute - DISC Department\\
-Universit\'e de Franche-Comt\'e, IUT de Belfort-Montb\'eliard\\
-19 avenue de Mar\'echal Juin, BP 527 \\
-90016 Belfort Cedex, France\\
-Email: raphael.couturier@univ-fcomte.fr}
-\and
-\IEEEauthorblockN{Lilia Ziane Khodja}
-\IEEEauthorblockA{Centre de Recherche INRIA Bordeaux Sud-Ouest\\
-200 avenue de la Vieille Tour\\
-33405 Talence Cedex, France\\
+\author{\IEEEauthorblockN{Rapha\"el Couturier\IEEEauthorrefmark{1}, Lilia Ziane Khodja \IEEEauthorrefmark{2}, and Christophe Guyeux\IEEEauthorrefmark{1}}
+\IEEEauthorblockA{\IEEEauthorrefmark{1} Femto-ST Institute, University of Franche Comte, France\\
+Email: \{raphael.couturier,christophe.guyeux\}@univ-fcomte.fr}
+\IEEEauthorblockA{\IEEEauthorrefmark{2} INRIA Bordeaux Sud-Ouest, France\\
Email: lilia.ziane@inria.fr}
}
+
+
% conference papers do not typically use \thanks and this command
% is locked out in conference mode. If really needed, such as for
% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts
\begin{abstract}
-%The abstract goes here. DO NOT USE SPECIAL CHARACTERS, SYMBOLS, OR MATH IN YOUR TITLE OR ABSTRACT.
+In this article, a two-stage iterative method is proposed to improve the
+convergence of Krylov based iterative ones, typically those of GMRES variants. The
+principle of the proposed approach is to build an external iteration over the Krylov
+method, and to frequently store its current residual (at each
+GMRES restart for instance). After a given number of outer iterations, a minimization
+step is applied on the matrix composed by the saved residuals, in order to
+compute a better solution while making new iterations if required. It is proven that
+the proposal has the same convergence properties than the inner embedded method itself.
+Experiments using up to 16,394 cores also show that the proposed algorithm
+run around 7 times faster than GMRES.
\end{abstract}
\begin{IEEEkeywords}
-Iterative Krylov methods; sparse linear systems; error minimization; PETSc; %à voir...
+Iterative Krylov methods; sparse linear systems; residual minimization; PETSc; %à voir...
\end{IEEEkeywords}
% no \IEEEPARstart
% You must have at least 2 lines in the paragraph with the drop letter
% (should never be an issue)
-Iterative methods are become more attractive than direct ones to solve very
-large sparse linear systems. They are more effective in a parallel context and
-require less memory and arithmetic operations than direct methods. A number of
-iterative methods are proposed and adapted by many researchers and the increased
-need for solving very large sparse linear systems triggered the development of
-efficient iterative techniques suitable for the parallel processing.
-
-Most of the successful iterative methods currently available are based on Krylov
-subspaces which consist in forming a basis of a sequence of successive matrix
-powers times an initial vector for example the residual. These methods are based
-on orthogonality of vectors of the Krylov subspace basis to solve linear
-systems. The most well-known iterative Krylov subspace methods are Conjugate
-Gradient method and GMRES method (generalized minimal residual).
+
+Iterative methods have recently become more attractive than direct ones to solve very large
+sparse linear systems. They are more efficient in a parallel
+context, supporting thousands of cores, and they require less memory and arithmetic
+operations than direct methods. This is why new iterative methods are frequently
+proposed or adapted by researchers, and the increasing need to solve very large sparse
+linear systems has triggered the development of such efficient iterative techniques
+suitable for parallel processing.
+
+Most of the successful iterative methods currently available are based on so-called ``Krylov
+subspaces''. They consist in forming a basis of successive matrix
+powers multiplied by an initial vector, which can be for instance the residual. These methods use vectors orthogonality of the Krylov subspace basis in order to solve linear
+systems. The most known iterative Krylov subspace methods are conjugate
+gradient and GMRES ones (Generalized Minimal RESidual).
+
However, iterative methods suffer from scalability problems on parallel
-computing platforms with many processors due to their need for reduction
-operations and collective communications to perform matrix-vector
+computing platforms with many processors, due to their need of reduction
+operations, and to collective communications to achive matrix-vector
multiplications. The communications on large clusters with thousands of cores
-and large sizes of messages can significantly affect the performances of
-iterative methods. In practice, Krylov subspace iteration methods are often used
-with preconditioners in order to increase their convergence and accelerate their
+and large sizes of messages can significantly affect the performances of these
+iterative methods. As a consequence, Krylov subspace iteration methods are often used
+with preconditioners in practice, to increase their convergence and accelerate their
performances. However, most of the good preconditioners are not scalable on
large clusters.
-In this paper we propose a two-stage algorithm based on two nested iterations
-called inner-outer iterations. This algorithm consists in solving the sparse
-linear system iteratively with a small number of inner iterations and restarts
-the outer step with a new solution minimizing some error functions over a Krylov
-subspace. This algorithm is iterative and easy to parallelize on large clusters
-and the minimization technique improves its convergence and performances.
-
-The present paper is organized as follows. In Section~\ref{sec:02} some related
-works are presented. Section~\ref{sec:03} presents our two-stage algorithm based
-on Krylov subspace iteration methods. Section~\ref{sec:04} shows some
-experimental results obtained on large clusters of our algorithm using routines
-of PETSc toolkit.
+In this research work, a two-stage algorithm based on two nested iterations
+called inner-outer iterations is proposed. This algorithm consists in solving the sparse
+linear system iteratively with a small number of inner iterations, and restarting
+the outer step with a new solution minimizing some error functions over some
+previous residuals. This algorithm is iterative and easy to parallelize on large
+clusters. Furthermore, the minimization technique improves its convergence and
+performances.
+
+The present article is organized as follows. Related works are presented in
+Section~\ref{sec:02}. Section~\ref{sec:03} details the two-stage algorithm using
+a least-square residual minimization, while Section~\ref{sec:04} provides
+convergence results regarding this method. Section~\ref{sec:05} shows some
+experimental results obtained on large clusters using routines of PETSc
+toolkit. This research work ends by a conclusion section, in which the proposal
+is summarized while intended perspectives are provided.
+
%%%*********************************************************
%%%*********************************************************
%%%*********************************************************
%%%*********************************************************
-\section{A Krylov two-stage algorithm}
+\section{Two-stage algorithm with least-square residuals minimization}
\label{sec:03}
A two-stage algorithm is proposed to solve large sparse linear systems of the
form $Ax=b$, where $A\in\mathbb{R}^{n\times n}$ is a sparse and square
-nonsingular matrix, $x\in\mathbb{R}^n$ is the solution vector and
-$b\in\mathbb{R}^n$ is the right-hand side. The algorithm is implemented as an
-inner-outer iteration solver based on iterative Krylov methods. The main key
-points of our solver are given in Algorithm~\ref{algo:01}.
-
-In order to accelerate the convergence, the outer iteration is implemented as an
-iterative Krylov method which minimizes some error functions over a Krylov
-subspace~\cite{saad96}. At each iteration, the sparse linear system $Ax=b$ is
-solved iteratively with an iterative method, for example GMRES
-method~\cite{saad86} or some of its variants, and the Krylov subspace that we
-used is spanned by a basis $S$ composed of successive solutions issued from the
-inner iteration
-\begin{equation}
- S = \{x^1, x^2, \ldots, x^s\} \text{,~} s\leq n.
-\end{equation}
-The advantage of such a Krylov subspace is that we neither need an orthogonal
-basis nor any synchronization between processors to generate this basis. The
-algorithm is periodically restarted every $s$ iterations with a new initial
-guess $x=S\alpha$ which minimizes the residual norm $\|b-Ax\|_2$ over the Krylov
-subspace spanned by vectors of $S$, where $\alpha$ is a solution of the normal
-equations
-\begin{equation}
- R^TR\alpha = R^Tb,
-\end{equation}
-which is associated with the least-squares problem
+nonsingular matrix, $x\in\mathbb{R}^n$ is the solution vector, and
+$b\in\mathbb{R}^n$ is the right-hand side. As explained previously,
+the algorithm is implemented as an
+inner-outer iteration solver based on iterative Krylov methods. The main
+key-points of the proposed solver are given in Algorithm~\ref{algo:01}.
+It can be summarized as follows: the
+inner solver is a Krylov based one. In order to accelerate its convergence, the
+outer solver periodically applies a least-square minimization on the residuals computed by the inner one. %Tsolver which does not required to be changed.
+
+At each outer iteration, the sparse linear system $Ax=b$ is partially
+solved using only $m$
+iterations of an iterative method, this latter being initialized with the
+best known approximation previously obtained.
+GMRES method~\cite{Saad86}, or any of its variants, can be used for instance as an
+inner solver. The current approximation of the Krylov method is then stored inside a matrix
+$S$ composed by the successive solutions that are computed during inner iterations.
+
+At each $s$ iterations, the minimization step is applied in order to
+compute a new solution $x$. For that, the previous residuals are computed with
+$(b-AS)$. The minimization of the residuals is obtained by
\begin{equation}
\underset{\alpha\in\mathbb{R}^{s}}{min}\|b-R\alpha\|_2
\label{eq:01}
\end{equation}
-such that $R=AS$ is a dense rectangular matrix in $\mathbb{R}^{n\times s}$,
-$s\ll n$, and $R^T$ denotes the transpose of matrix $R$. We use an iterative
-method to solve the least-squares problem~(\ref{eq:01}) such as CGLS
-~\cite{hestenes52} or LSQR~\cite{paige82} which are more appropriate than a
-direct method in the parallel context.
+with $R=AS$. Then the new solution $x$ is computed with $x=S\alpha$.
+
+
+In practice, $R$ is a dense rectangular matrix belonging in $\mathbb{R}^{n\times s}$,
+with $s\ll n$. In order to minimize~(\eqref{eq:01}), a least-square method such as
+CGLS ~\cite{Hestenes52} or LSQR~\cite{Paige82} is used. Remark that these methods are more
+appropriate than a single direct method in a parallel context.
+
+
\begin{algorithm}[t]
-\caption{A Krylov two-stage algorithm}
+\caption{TSIRM}
\begin{algorithmic}[1]
\Input $A$ (sparse matrix), $b$ (right-hand side)
\Output $x$ (solution vector)\vspace{0.2cm}
\State Set the initial guess $x^0$
- \For {$k=1,2,3,\ldots$ until convergence}
- \State Solve iteratively $Ax^k=b$
- \State $S_{k~mod~s}=x^k$
- \If {$k$ mod $s=0$ {\bf and} not convergence}
- \State Compute dense matrix $R=AS$
- \State Solve least-squares problem $\underset{\alpha\in\mathbb{R}^{s}}{min}\|b-R\alpha\|_2$
- \State Compute minimizer $x^k=S\alpha$
+ \For {$k=1,2,3,\ldots$ until convergence (error$<\epsilon_{tsirm}$)} \label{algo:conv}
+ \State $x^k=Solve(A,b,x^{k-1},max\_iter_{kryl})$ \label{algo:solve}
+ \State retrieve error
+ \State $S_{k \mod s}=x^k$ \label{algo:store}
+ \If {$k \mod s=0$ {\bf and} error$>\epsilon_{kryl}$}
+ \State $R=AS$ \Comment{compute dense matrix} \label{algo:matrix_mul}
+ \State Solve least-square problem $\underset{\alpha\in\mathbb{R}^{s}}{min}\|b-R\alpha\|_2$ \label{algo:}
+ \State $x^k=S\alpha$ \Comment{compute new solution}
\EndIf
\EndFor
\end{algorithmic}
\label{algo:01}
\end{algorithm}
-Operation $S_{k~ mod~ s}=x^k$ consists in copying the residual $x_k$ into the
-column $k~ mod~ s$ of the matrix $S$. After the minimization, the matrix $S$ is
-reused with the new values of the residuals.
+Algorithm~\ref{algo:01} summarizes the principle of our method. The outer
+iteration is inside the for loop. Line~\ref{algo:solve}, the Krylov method is
+called for a maximum of $max\_iter_{kryl}$ iterations. In practice, we suggest to set this parameter
+equals to the restart number of the GMRES-like method. Moreover, a tolerance
+threshold must be specified for the solver. In practice, this threshold must be
+much smaller than the convergence threshold of the TSIRM algorithm (\emph{i.e.}
+$\epsilon_{tsirm}$). Line~\ref{algo:store}, $S_{k~ mod~ s}=x^k$ consists in copying the
+solution $x_k$ into the column $k~ mod~ s$ of the matrix $S$. After the
+minimization, the matrix $S$ is reused with the new values of the residuals. To
+solve the minimization problem, an iterative method is used. Two parameters are
+required for that: the maximum number of iteration and the threshold to stop the
+method.
+
+Let us summarize the most important parameters of TSIRM:
+\begin{itemize}
+\item $\epsilon_{tsirm}$: the threshold to stop the TSIRM method;
+\item $max\_iter_{kryl}$: the maximum number of iterations for the Krylov method;
+\item $s$: the number of outer iterations before applying the minimization step;
+\item $max\_iter_{ls}$: the maximum number of iterations for the iterative least-square method;
+\item $\epsilon_{ls}$: the threshold used to stop the least-square method.
+\end{itemize}
+
+
+The parallelisation of TSIRM relies on the parallelization of all its
+parts. More precisely, except the least-square step, all the other parts are
+obvious to achieve out in parallel. In order to develop a parallel version of
+our code, we have chosen to use PETSc~\cite{petsc-web-page}. For
+line~\ref{algo:matrix_mul} the matrix-matrix multiplication is implemented and
+efficient since the matrix $A$ is sparse and since the matrix $S$ contains few
+colums in practice. As explained previously, at least two methods seem to be
+interesting to solve the least-square minimization, CGLS and LSQR.
+
+In the following we remind the CGLS algorithm. The LSQR method follows more or
+less the same principle but it take more place, so we briefly explain the parallelization of CGLS which is similar to LSQR.
+
+\begin{algorithm}[t]
+\caption{CGLS}
+\begin{algorithmic}[1]
+ \Input $A$ (matrix), $b$ (right-hand side)
+ \Output $x$ (solution vector)\vspace{0.2cm}
+ \State $r=b-Ax$
+ \State $p=A'r$
+ \State $s=p$
+ \State $g=||s||^2_2$
+ \For {$k=1,2,3,\ldots$ until convergence (g$<\epsilon_{ls}$)} \label{algo2:conv}
+ \State $q=Ap$
+ \State $\alpha=g/||q||^2_2$
+ \State $x=x+alpha*p$
+ \State $r=r-alpha*q$
+ \State $s=A'*r$
+ \State $g_{old}=g$
+ \State $g=||s||^2_2$
+ \State $\beta=g/g_{old}$
+ \EndFor
+\end{algorithmic}
+\label{algo:02}
+\end{algorithm}
+
+
+In each iteration of CGLS, there is two matrix-vector multiplications and some
+classical operations: dots, norm, multiplication and addition on vectors. All
+these operations are easy to implement in PETSc or similar environment.
+
+
%%%*********************************************************
%%%*********************************************************
+\section{Convergence results}
+\label{sec:04}
+Let us recall the following result, see~\cite{Saad86}.
+\begin{proposition}
+Suppose that $A$ is a positive real matrix with symmetric part $M$. Then the residual norm provided at the $m$-th step of GMRES satisfies:
+\begin{equation}
+||r_m|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_0|| ,
+\end{equation}
+where $\alpha = \lambda_min(M)^2$ and $\beta = \lambda_max(A^T A)$, which proves
+the convergence of GMRES($m$) for all $m$ under that assumption regarding $A$.
+\end{proposition}
+
%%%*********************************************************
%%%*********************************************************
-\section{Experiments using petsc}
-\label{sec:04}
+\section{Experiments using PETSc}
+\label{sec:05}
In order to see the influence of our algorithm with only one processor, we first
show a comparison with the standard version of GMRES and our algorithm. In
-table~\ref{tab:01}, we show the matrices we have used and some of them
+Table~\ref{tab:01}, we show the matrices we have used and some of them
characteristics. For all the matrices, the name, the field, the number of rows
and the number of nonzero elements is given.
-\begin{table}
+\begin{table*}[htbp]
\begin{center}
\begin{tabular}{|c|c|r|r|r|}
\hline
\caption{Main characteristics of the sparse matrices chosen from the Davis collection}
\label{tab:01}
\end{center}
-\end{table}
+\end{table*}
+
+The following parameters have been chosen for our experiments. As by default
+the restart of GMRES is performed every 30 iterations, we have chosen to stop
+the GMRES every 30 iterations, $max\_iter_{kryl}=30$). $s$ is set to 8. CGLS is
+chosen to minimize the least-squares problem with the following parameters:
+$\epsilon_{ls}=1e-40$ and $max\_iter_{ls}=20$. The external precision is set to
+$\epsilon_{tsirm}=1e-10$. Those experiments have been performed on a Intel(R)
+Core(TM) i7-3630QM CPU @ 2.40GHz with the version 3.5.1 of PETSc.
+
-In table~\ref{tab:02}, some experiments comparing the sovling of the linear
+In Table~\ref{tab:02}, some experiments comparing the solving of the linear
systems obtained with the previous matrices with a GMRES variant and with out 2
stage algorithm are given. In the second column, it can be noticed that either
gmres or fgmres is used to solve the linear system. According to the matrices,
-different preconditioner is used. With the 2 stage algorithm, the same
-solver and the same preconditionner is used.
+different preconditioner is used. With TSIRM, the same solver and the same
+preconditionner is used. This Table shows that TSIRM can drastically reduce the
+number of iterations to reach the convergence when the number of iterations for
+the normal GMRES is more or less greater than 500. In fact this also depends on
+tow parameters: the number of iterations to stop GMRES and the number of
+iterations to perform the minimization.
-\begin{table}
+\begin{table}[htbp]
\begin{center}
\begin{tabular}{|c|c|r|r|r|r|}
\hline
- \multirow{2}{*}{Matrix name} & Solver / & \multicolumn{2}{c|}{gmres variant} & \multicolumn{2}{c|}{2 stage} \\
+ \multirow{2}{*}{Matrix name} & Solver / & \multicolumn{2}{c|}{GMRES} & \multicolumn{2}{c|}{TSIRM CGLS} \\
+\cline{3-6}
& precond & Time & \# Iter. & Time & \# Iter. \\\hline \hline
crashbasis & gmres / none & 15.65 & 518 & 14.12 & 450 \\
epb3 & fgmres / sor & 8.67 & 600 & 8.21 & 540 \\
atmosmodj & fgmres / sor & 104.23 & 451 & 88.97 & 366 \\
bfwa398 & gmres / none & 1.42 & 9612 & 0.28 & 1650 \\
-torso3 & fgmres/sor & 565 & 37.70 & 34.97 & 510 \\
+torso3 & fgmres / sor & 37.70 & 565 & 34.97 & 510 \\
\hline
\end{tabular}
-\caption{Comparison of GMRES and 2 stage GMRES algorithms in sequential with some matrices, time is expressed in seconds.}
+\caption{Comparison of (F)GMRES and 2 stage (F)GMRES algorithms in sequential with some matrices, time is expressed in seconds.}
\label{tab:02}
\end{center}
\end{table}
-Param : retart 30 iters
-cols = 8
-iter cgls = 20
-cgls prec = 1e-40
-prec = 1e-10
-Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz
+
+In order to perform larger experiments, we have tested some example application
+of PETSc. Those applications are available in the ksp part which is suited for
+scalable linear equations solvers:
+\begin{itemize}
+\item ex15 is an example which solves in parallel an operator using a finite
+ difference scheme. The diagonal is equals to 4 and 4 extra-diagonals
+ representing the neighbors in each directions is equal to -1. This example is
+ used in many physical phenomena, for example, heat and fluid flow, wave
+ propagation...
+\item ex54 is another example based on 2D problem discretized with quadrilateral
+ finite elements. For this example, the user can define the scaling of material
+ coefficient in embedded circle, it is called $\alpha$.
+\end{itemize}
+For more technical details on these applications, interested reader are invited
+to read the codes available in the PETSc sources. Those problem have been
+chosen because they are scalable with many cores. We have tested other problem
+but they are not scalable with many cores.
+
+In the following larger experiments are described on two large scale architectures: Curie and Juqeen... {\bf description...}\\
+
+
+{\bf Description of preconditioners}
+
+\begin{table*}[htbp]
+\begin{center}
+\begin{tabular}{|r|r|r|r|r|r|r|r|r|}
+\hline
+
+ nb. cores & precond & \multicolumn{2}{c|}{FGMRES} & \multicolumn{2}{c|}{TSIRM CGLS} & \multicolumn{2}{c|}{TSIRM LSQR} & best gain \\
+\cline{3-8}
+ & & Time & \# Iter. & Time & \# Iter. & Time & \# Iter. & \\\hline \hline
+ 2,048 & mg & 403.49 & 18,210 & 73.89 & 3,060 & 77.84 & 3,270 & 5.46 \\
+ 2,048 & sor & 745.37 & 57,060 & 87.31 & 6,150 & 104.21 & 7,230 & 8.53 \\
+ 4,096 & mg & 562.25 & 25,170 & 97.23 & 3,990 & 89.71 & 3,630 & 6.27 \\
+ 4,096 & sor & 912.12 & 70,194 & 145.57 & 9,750 & 168.97 & 10,980 & 6.26 \\
+ 8,192 & mg & 917.02 & 40,290 & 148.81 & 5,730 & 143.03 & 5,280 & 6.41 \\
+ 8,192 & sor & 1,404.53 & 106,530 & 212.55 & 12,990 & 180.97 & 10,470 & 7.76 \\
+ 16,384 & mg & 1,430.56 & 63,930 & 237.17 & 8,310 & 244.26 & 7,950 & 6.03 \\
+ 16,384 & sor & 2,852.14 & 216,240 & 418.46 & 21,690 & 505.26 & 23,970 & 6.82 \\
+\hline
+
+\end{tabular}
+\caption{Comparison of FGMRES and TSIRM with FGMRES for example ex15 of PETSc with two preconditioner (mg and sor) with 25,000 components per core on Juqueen (threshold 1e-3, restart=30, s=12), time is expressed in seconds.}
+\label{tab:03}
+\end{center}
+\end{table*}
+
+Table~\ref{tab:03} shows the execution times and the number of iterations of
+example ex15 of PETSc on the Juqueen architecture. Differents number of cores
+are studied rangin from 2,048 upto 16,383. Two preconditioners have been
+tested. For those experiments, the number of components (or unknown of the
+problems) per processor is fixed to 25,000, also called weak scaling. This
+number can seem relatively small. In fact, for some applications that need a lot
+of memory, the number of components per processor requires sometimes to be
+small.
+
+In this Table, we can notice that TSIRM is always faster than FGMRES. The last
+column shows the ratio between FGMRES and the best version of TSIRM according to
+the minimization procedure: CGLS or LSQR. Even if we have computed the worst
+case between CGLS and LSQR, it is clear that TSIRM is alsways faster than
+FGMRES. For this example, the multigrid preconditionner is faster than SOR. The
+gain between TSIRM and FGMRES is more or less similar for the two
+preconditioners.
+
+In Figure~\ref{fig:01}, the number of iterations per second corresponding to
+Table~\ref{tab:01} is displayed. It should be noticed that for TSIRM, only the
+iterations of the Krylov solver are taken into account. Iterations of CGLS or
+LSQR are not recorded but they are time-consuming. It can be noticed that the
+number of iterations per second of FMGRES is constant whereas it decrease with
+TSIRM with both preconditioner. This can be explained by the fact that when the
+number of core increases the time for the minimization step also increases but
+it is also more efficient to reduce the number of iterations.
+
+
+\begin{figure}[htbp]
+\centering
+ \includegraphics[width=0.45\textwidth]{nb_iter_sec_ex15_juqueen}
+\caption{Number of iterations per second with ex15 and the same parameters than in Table~\ref{tab:03}}
+\label{fig:01}
+\end{figure}
+
+
+
+
+
+\begin{table*}[htbp]
+\begin{center}
+\begin{tabular}{|r|r|r|r|r|r|r|r|r|}
+\hline
+
+ nb. cores & threshold & \multicolumn{2}{c|}{GMRES} & \multicolumn{2}{c|}{TSIRM CGLS} & \multicolumn{2}{c|}{TSIRM LSQR} & best gain \\
+\cline{3-8}
+ & & Time & \# Iter. & Time & \# Iter. & Time & \# Iter. & \\\hline \hline
+ 2,048 & 8e-5 & 108.88 & 16,560 & 23.06 & 3,630 & 22.79 & 3,630 & 4.77 \\
+ 2,048 & 6e-5 & 194.01 & 30,270 & 35.50 & 5,430 & 27.74 & 4,350 & 6.99 \\
+ 4,096 & 7e-5 & 160.59 & 22,530 & 35.15 & 5,130 & 29.21 & 4,350 & 5.49 \\
+ 4,096 & 6e-5 & 249.27 & 35,520 & 52.13 & 7,950 & 39.24 & 5,790 & 6.35 \\
+ 8,192 & 6e-5 & 149.54 & 17,280 & 28.68 & 3,810 & 29.05 & 3,990 & 5.21 \\
+ 8,192 & 5e-5 & 785.04 & 109,590 & 76.07 & 10,470 & 69.42 & 9,030 & 11.30 \\
+ 16,384 & 4e-5 & 718.61 & 86,400 & 98.98 & 10,830 & 131.86 & 14,790 & 7.26 \\
+\hline
+
+\end{tabular}
+\caption{Comparison of FGMRES and 2 stage FGMRES algorithms for ex54 of Petsc (both with the MG preconditioner) with 25000 components per core on Curie (restart=30, s=12), time is expressed in seconds.}
+\label{tab:04}
+\end{center}
+\end{table*}
+
+
+
+
+
+\begin{table*}[htbp]
+\begin{center}
+\begin{tabular}{|r|r|r|r|r|r|r|r|r|r|r|}
+\hline
+
+ nb. cores & \multicolumn{2}{c|}{GMRES} & \multicolumn{2}{c|}{TSIRM CGLS} & \multicolumn{2}{c|}{TSIRM LSQR} & best gain & \multicolumn{3}{c|}{efficiency} \\
+\cline{2-7} \cline{9-11}
+ & Time & \# Iter. & Time & \# Iter. & Time & \# Iter. & & GMRES & TS CGLS & TS LSQR\\\hline \hline
+ 512 & 3,969.69 & 33,120 & 709.57 & 5,790 & 622.76 & 5,070 & 6.37 & 1 & 1 & 1 \\
+ 1024 & 1,530.06 & 25,860 & 290.95 & 4,830 & 307.71 & 5,070 & 5.25 & 1.30 & 1.21 & 1.01 \\
+ 2048 & 919.62 & 31,470 & 237.52 & 8,040 & 194.22 & 6,510 & 4.73 & 1.08 & .75 & .80\\
+ 4096 & 405.60 & 28,380 & 111.67 & 7,590 & 91.72 & 6,510 & 4.42 & 1.22 & .79 & .84 \\
+ 8192 & 785.04 & 109,590 & 76.07 & 10,470 & 69.42 & 9,030 & 11.30 & .32 & .58 & .56 \\
+
+\hline
+
+\end{tabular}
+\caption{Comparison of FGMRES and 2 stage FGMRES algorithms for ex54 of Petsc (both with the MG preconditioner) with 204,919,225 components on Curie with different number of cores (restart=30, s=12, threshol 5e-5), time is expressed in seconds.}
+\label{tab:05}
+\end{center}
+\end{table*}
+
%%%*********************************************************
%%%*********************************************************
%%%*********************************************************
%%%*********************************************************
\section{Conclusion}
-\label{sec:05}
+\label{sec:06}
%The conclusion goes here. this is more of the conclusion
%%%*********************************************************
%%%*********************************************************
+future plan : \\
+- study other kinds of matrices, problems, inner solvers\\
+- test the influence of all the parameters\\
+- adaptative number of outer iterations to minimize\\
+- other methods to minimize the residuals?\\
+- implement our solver inside PETSc
+
% conference papers do not normally have an appendix
%%%*********************************************************
%%%*********************************************************
\section*{Acknowledgment}
-%The authors would like to thank...
-%more thanks here
-%%%*********************************************************
-%%%*********************************************************
+This paper is partially funded by the Labex ACTION program (contract
+ANR-11-LABX-01-01). We acknowledge PRACE for awarding us access to resource
+Curie and Juqueen respectively based in France and Germany.
+
% trigger a \newpage just before the given reference
% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
-%\bibliographystyle{IEEEtran}
+\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
-%\bibliography{IEEEabrv,../bib/paper}
+\bibliography{biblio}
%
% <OR> manually copy in the resultant .bbl file
% set second argument of \begin to the number of references
% (used to reserve space for the reference number labels box)
-\begin{thebibliography}{1}
+%% \begin{thebibliography}{1}
-\bibitem{saad86} Y.~Saad and M.~H.~Schultz, \emph{GMRES: A Generalized Minimal Residual Algorithm for Solving Nonsymmetric Linear Systems}, SIAM Journal on Scientific and Statistical Computing, 7(3):856--869, 1986.
+%% \bibitem{saad86} Y.~Saad and M.~H.~Schultz, \emph{GMRES: A Generalized Minimal Residual Algorithm for Solving Nonsymmetric Linear Systems}, SIAM Journal on Scientific and Statistical Computing, 7(3):856--869, 1986.
-\bibitem{saad96} Y.~Saad, \emph{Iterative Methods for Sparse Linear Systems}, PWS Publishing, New York, 1996.
+%% \bibitem{saad96} Y.~Saad, \emph{Iterative Methods for Sparse Linear Systems}, PWS Publishing, New York, 1996.
-\bibitem{hestenes52} M.~R.~Hestenes and E.~Stiefel, \emph{Methods of conjugate gradients for solving linear system}, Journal of Research of National Bureau of Standards, B49:409--436, 1952.
+%% \bibitem{hestenes52} M.~R.~Hestenes and E.~Stiefel, \emph{Methods of conjugate gradients for solving linear system}, Journal of Research of National Bureau of Standards, B49:409--436, 1952.
-\bibitem{paige82} C.~C.~Paige and A.~M.~Saunders, \emph{LSQR: An Algorithm for Sparse Linear Equations and Sparse Least Squares}, ACM Trans. Math. Softw. 8(1):43--71, 1982.
-\end{thebibliography}
+%% \bibitem{paige82} C.~C.~Paige and A.~M.~Saunders, \emph{LSQR: An Algorithm for Sparse Linear Equations and Sparse Least Squares}, ACM Trans. Math. Softw. 8(1):43--71, 1982.
+%% \end{thebibliography}
