+\noindent In this section, we summarize some related works regarding the
+coverage problem and distinguish our LiCO protocol from the works presented in
+the literature.
+
+The most discussed coverage problems in literature can be classified in three
+categories~\cite{li2013survey} according to their respective monitoring
+objective. Hence, area coverage \cite{Misra} means that every point inside a
+fixed area must be monitored, while target coverage~\cite{yang2014novel} refers
+to the objective of coverage for a finite number of discrete points called
+targets, and barrier coverage~\cite{HeShibo}\cite{kim2013maximum} focuses on
+preventing intruders from entering into the region of interest. In
+\cite{Deng2012} authors transform the area coverage problem to the target
+coverage one taking into account the intersection points among disks of sensors
+nodes or between disk of sensor nodes and boundaries. In
+\cite{Huang:2003:CPW:941350.941367} authors prove that if the perimeters of
+sensors are sufficiently covered it will be the case for the whole area. They
+provide an algorithm in $O(nd~log~d)$ time to compute the perimeter-coverage of
+each sensor, where $d$ denotes the maximum number of sensors that are
+neighbors to a sensor and $n$ is the total number of sensors in the
+network. {\it In LiCO protocol, instead of determining the level of coverage of
+ a set of discrete points, our optimization model is based on checking the
+ perimeter-coverage of each sensor to activate a minimal number of sensors.}
+
+The major approach to extend network lifetime while preserving coverage is to
+divide/organize the sensors into a suitable number of set covers (disjoint or
+non-disjoint), where each set completely covers a region of interest, and to
+activate these set covers successively. The network activity can be planned in
+advance and scheduled for the entire network lifetime or organized in periods,
+and the set of active sensor nodes is decided at the beginning of each period
+\cite{ling2009energy}. Active node selection is determined based on the problem
+requirements (e.g. area monitoring, connectivity, or power efficiency). For
+instance, Jaggi {\em et al.}~\cite{jaggi2006} address the problem of maximizing
+the lifetime by dividing sensors into the maximum number of disjoint subsets
+such that each subset can ensure both coverage and connectivity. A greedy
+algorithm is applied once to solve this problem and the computed sets are
+activated in succession to achieve the desired network lifetime. Vu
+\cite{chin2007}, Padmatvathy {\em et al.}~\cite{pc10}, propose algorithms
+working in a periodic fashion where a cover set is computed at the beginning of
+each period. {\it Motivated by these works, LiCO protocol works in periods,
+ where each period contains a preliminary phase for information exchange and
+ decisions, followed by a sensing phase where one cover set is in charge of the
+ sensing task.}
+
+Various centralized and distributed approaches, or even a mixing of these two
+concepts, have been proposed to extend the network lifetime. In distributed
+algorithms~\cite{yangnovel,ChinhVu,qu2013distributed} each sensor decides of its
+own activity scheduling after an information exchange with its neighbors. The
+main interest of such an approach is to avoid long range communications and thus
+to reduce the energy dedicated to the communications. Unfortunately, since each
+node has only information on its immediate neighbors (usually the one-hop ones)
+it may take a bad decision leading to a global suboptimal solution. Conversely,
+centralized
+algorithms~\cite{cardei2005improving,zorbas2010solving,pujari2011high} always
+provide nearly or close to optimal solution since the algorithm has a global
+view of the whole network. The disadvantage of a centralized method is obviously
+its high cost in communications needed to transmit to a single node, the base
+station which will globally schedule nodes' activities, data from all the other
+sensor nodes in the area. The price in communications can be very huge since
+long range communications will be needed. In fact the larger the WNS is, the
+higher the communication and thus the energy cost are. {\it In order to be
+ suitable for large-scale networks, in the LiCO protocol, the area of interest
+ is divided into several smaller subregions, and in each one, a node called the
+ leader is in charge of selecting the active sensors for the current
+ period. Thus our protocol is scalable and is a globally distributed method,
+ whereas it is centralized in each subregion.}
+
+Various coverage scheduling algorithms have been developed this last years.
+Many of them, dealing with the maximization of the number of cover sets, are
+heuristics. These heuristics involve the construction of a cover set by
+including in priority the sensor nodes which cover critical targets, that is to
+say targets that are covered by the smallest number of sensors
+\cite{berman04,zorbas2010solving}. Other approaches are based on mathematical
+programming formulations~\cite{cardei2005energy,5714480,pujari2011high,Yang2014}
+and dedicated techniques (solving with a branch-and-bound algorithm available in
+optimization solver). The problem is formulated as an optimization problem
+(maximization of the lifetime or number of cover sets) under target coverage and
+energy constraints. Column generation techniques, well-known and widely
+practiced techniques for solving linear programs with too many variables, have
+also been
+used~\cite{castano2013column,rossi2012exact,deschinkel2012column}. {\it In the LiCO
+ protocol, each leader, in charge of a subregion, solves an integer program
+ which has a twofold objective: minimize the overcoverage and the undercoverage
+ of the perimeter of each sensor.}
+
+%\noindent Recently, the coverage problem has been received a high attention, which concentrates on how the physical space could be well monitored after the deployment. Coverage is one of the Quality of Service (QoS) parameters in WSNs, which is highly concerned with power depletion~\cite{zhu2012survey}. Most of the works about the coverage protocols have been suggested in the literature focused on three types of the coverage in WSNs~\cite{mulligan2010coverage}: the first, area coverage means that each point in the area of interest within the sensing range of at least one sensor node; the second, target coverage in which a fixed set of targets need to be monitored; the third, barrier coverage refers to detect the intruders crossing a boundary of WSN. The work in this paper emphasized on the area coverage, so, some area coverage protocols have been reviewed in this section, and the shortcomings of reviewed approaches are being summarized.
+
+%The problem of k-coverage in WSNs was addressed~\cite{ammari2012centralized}. It mathematically formulated and the spacial sensor density for full k-coverage determined, where the relation between the communication range and the sensing range constructed by this work to retain the k-coverage and connectivity in WSN. After that, a four configuration protocols have proposed for treating the k-coverage in WSNs.
+
+%In~\cite{rebai2014branch}, the problem of full grid coverage is formulated using two integer linear programming models: the first, a model that takes into account only the overall coverage constraint; the second, both the connectivity and the full grid coverage constraints have taken into consideration. This work did not take into account the energy constraint.
+
+%Li et al.~\cite{li2011transforming} presented a framework to convert any complete coverage problem to a partial coverage one with any coverage ratio by means of executing a complete coverage algorithm to find a full coverage sets with virtual radii and transforming the coverage sets to a partial coverage sets by adjusting sensing radii. The properties of the original algorithms can be maintained by this framework and the transformation process has a low execution time.
+
+%The authors in~\cite{liu2014generalized} explained that in some applications of WSNs such as structural health monitoring (SHM) and volcano monitoring, the traditional coverage model which is a geographic area defined for individual sensors is not always valid. For this reason, they define a generalized coverage model, which is not need to have the coverage area of individual nodes, but only based on a function to determine whether a set of
+%sensor nodes is capable of satisfy the requested monitoring task for a certain area. They have proposed two approaches to divide the deployed nodes into suitable cover sets, which can be used to prolong the network lifetime.
