From: Karine Deschinkel Date: Tue, 29 Sep 2015 08:03:24 +0000 (+0200) Subject: ok X-Git-Url: https://bilbo.iut-bm.univ-fcomte.fr/and/gitweb/LiCO.git/commitdiff_plain/014e854a02c1df7761fd67f873bc01a4d3fb204f ok --- diff --git a/PeCO-EO/articleeo.aux b/PeCO-EO/articleeo.aux index 174ae9d..07cbb3d 100644 --- a/PeCO-EO/articleeo.aux +++ b/PeCO-EO/articleeo.aux @@ -70,31 +70,31 @@ \newlabel{figure5}{{5}{14}} \newlabel{figure6}{{6}{14}} \@writefile{toc}{\contentsline {subsubsection}{\numberline {5.2.3}\leavevmode {\color {blue}Energy Saving Ratio (ESR)}}{14}} -\newlabel{fig5}{{7}{14}} -\@writefile{toc}{\contentsline {subsubsection}{\numberline {5.2.4}Energy Consumption}{15}} -\newlabel{figure7}{{8}{15}} -\@writefile{toc}{\contentsline {subsubsection}{\numberline {5.2.5}Network Lifetime}{15}} \citation{li2011transforming} \citation{vu2009universal} \citation{wang2014keeping} -\newlabel{figure8}{{9}{16}} +\newlabel{fig5}{{7}{15}} +\@writefile{toc}{\contentsline {subsubsection}{\numberline {5.2.4}Energy Consumption}{15}} +\@writefile{toc}{\contentsline {subsubsection}{\numberline {5.2.5}Network Lifetime}{15}} +\newlabel{figure7}{{8}{16}} +\@writefile{toc}{\contentsline {subsubsection}{\numberline {5.2.6}Impact of $\alpha $ and $\beta $ on PeCO's performance}{16}} +\newlabel{sec:Impact}{{5.2.6}{16}} +\newlabel{figure8}{{9}{17}} \newlabel{figure9}{{10}{17}} -\@writefile{toc}{\contentsline {subsubsection}{\numberline {5.2.6}Impact of $\alpha $ and $\beta $ on PeCO's performance}{17}} -\newlabel{sec:Impact}{{5.2.6}{17}} -\newlabel{my-labelx}{{4}{17}} +\@writefile{toc}{\contentsline {section}{\numberline {6}Conclusion and Future Works}{17}} +\newlabel{sec:Conclusion and Future Works}{{6}{17}} \bibstyle{gENO} -\bibdata{articleeo} +\bibdata{biblio} \bibcite{akyildiz2002wireless}{{1}{2002}{{Akyildiz et~al.}}{{Akyildiz, Su, Sankarasubramaniam, and Cayirci}}} \bibcite{anastasi2009energy}{{2}{2009}{{Anastasi et~al.}}{{Anastasi, Conti, Di~Francesco, and Passarella}}} \bibcite{berman04}{{3}{2004}{{Berman and Calinescu}}{{}}} \bibcite{cardei2005improving}{{4}{2005}{{Cardei and Du}}{{}}} \bibcite{cardei2005energy}{{5}{2005}{{Cardei et~al.}}{{Cardei, Thai, Li, and Wu}}} +\newlabel{my-labelx}{{4}{18}} \bibcite{castano2013column}{{6}{2014}{{Casta{\~n}o et~al.}}{{Casta{\~n}o, Rossi, Sevaux, and Velasco}}} \bibcite{iamigo:cplex}{{7}{2010}{{CPLEX}}{{}}} \bibcite{Deng2012}{{8}{2012}{{Deng, Jiguo~Yu, and Chen}}{{}}} \bibcite{deschinkel2012column}{{9}{2012}{{Deschinkel}}{{}}} -\@writefile{toc}{\contentsline {section}{\numberline {6}Conclusion and Future Works}{18}} -\newlabel{sec:Conclusion and Future Works}{{6}{18}} \bibcite{AMPL}{{10}{November 12, 2002}{{Fourer, Gay, and Kernighan}}{{}}} \bibcite{HeShibo}{{11}{2014}{{He et~al.}}{{He, Gong, Zhang, Chen, and Sun}}} \bibcite{huang2005coverage}{{12}{2005}{{Huang and Tseng}}{{}}} @@ -105,28 +105,31 @@ \bibcite{kim2013maximum}{{17}{2013}{{Kim and Cobb}}{{}}} \bibcite{0031-9155-44-1-012}{{18}{1999}{{Lee et~al.}}{{Lee, Gallagher, Silvern, Wuu, and Zaider}}} \bibcite{li2013survey}{{19}{2013}{{Li and Vasilakos}}{{}}} -\bibcite{ling2009energy}{{20}{2009}{{Ling and Znati}}{{}}} -\bibcite{glpk}{{21}{2012}{{Makhorin}}{{}}} -\bibcite{Misra}{{22}{2011}{{Misra, Kumar, and Obaidat}}{{}}} -\bibcite{pc10}{{23}{2010}{{Padmavathy and Chitra}}{{}}} -\bibcite{puccinelli2005wireless}{{24}{2005}{{Puccinelli and Haenggi}}{{}}} -\bibcite{pujari2011high}{{25}{2011}{{Pujari}}{{}}} -\bibcite{qu2013distributed}{{26}{2013}{{Qu and Georgakopoulos}}{{}}} -\bibcite{rault2014energy}{{27}{2014}{{Rault, Bouabdallah, and Challal}}{{}}} -\bibcite{doi:10.1080/0305215X.2012.687732}{{28}{2013}{{Singh, Rossi, and Sevaux}}{{}}} -\bibcite{varga}{{29}{2003}{{Varga}}{{}}} -\bibcite{ChinhVu}{{30}{2006}{{Vu et~al.}}{{Vu, Gao, Deshmukh, and Li}}} -\bibcite{chin2007}{{31}{2009}{{Vu}}{{}}} -\bibcite{wang2011coverage}{{32}{2011}{{Wang}}{{}}} -\bibcite{5714480}{{33}{2010}{{Xing, Li, and Wang}}{{}}} -\bibcite{xu2001geography}{{34}{2001}{{Xu, Heidemann, and Estrin}}{{}}} -\bibcite{yan2008design}{{35}{2008}{{Yan et~al.}}{{Yan, Gu, He, and Stankovic}}} -\bibcite{yang2014novel}{{36}{2014{a}}{{Yang and Chin}}{{}}} -\bibcite{yangnovel}{{37}{2014{b}}{{Yang and Chin}}{{}}} -\bibcite{Yang2014}{{38}{2014}{{Yang and Liu}}{{}}} -\bibcite{yick2008wireless}{{39}{2008}{{Yick, Mukherjee, and Ghosal}}{{}}} -\bibcite{Zhang05}{{40}{2005}{{Zhang and Hou}}{{}}} -\bibcite{zhou2009variable}{{41}{2009}{{Zhou, Das, and Gupta}}{{}}} -\bibcite{zorbas2010solving}{{42}{2010}{{Zorbas et~al.}}{{Zorbas, Glynos, Kotzanikolaou, and Douligeris}}} +\bibcite{li2011transforming}{{20}{2011}{{Li et~al.}}{{Li, Vu, Ai, Chen, and Zhao}}} +\bibcite{ling2009energy}{{21}{2009}{{Ling and Znati}}{{}}} +\bibcite{glpk}{{22}{2012}{{Makhorin}}{{}}} +\bibcite{Misra}{{23}{2011}{{Misra, Kumar, and Obaidat}}{{}}} +\bibcite{pc10}{{24}{2010}{{Padmavathy and Chitra}}{{}}} +\bibcite{puccinelli2005wireless}{{25}{2005}{{Puccinelli and Haenggi}}{{}}} +\bibcite{pujari2011high}{{26}{2011}{{Pujari}}{{}}} +\bibcite{qu2013distributed}{{27}{2013}{{Qu and Georgakopoulos}}{{}}} +\bibcite{rault2014energy}{{28}{2014}{{Rault, Bouabdallah, and Challal}}{{}}} +\bibcite{doi:10.1080/0305215X.2012.687732}{{29}{2013}{{Singh, Rossi, and Sevaux}}{{}}} +\bibcite{varga}{{30}{2003}{{Varga}}{{}}} +\bibcite{vu2009universal}{{31}{2009}{{Vu et~al.}}{{Vu, Chen, Zhao, and Li}}} +\bibcite{ChinhVu}{{32}{2006}{{Vu et~al.}}{{Vu, Gao, Deshmukh, and Li}}} +\bibcite{chin2007}{{33}{2009}{{Vu}}{{}}} +\bibcite{wang2011coverage}{{34}{2011}{{Wang}}{{}}} +\bibcite{wang2014keeping}{{35}{2014}{{Wang et~al.}}{{Wang, Yang, Lin, and Lin}}} +\bibcite{5714480}{{36}{2010}{{Xing, Li, and Wang}}{{}}} +\bibcite{xu2001geography}{{37}{2001}{{Xu, Heidemann, and Estrin}}{{}}} +\bibcite{yan2008design}{{38}{2008}{{Yan et~al.}}{{Yan, Gu, He, and Stankovic}}} +\bibcite{yang2014novel}{{39}{2014{a}}{{Yang and Chin}}{{}}} +\bibcite{yangnovel}{{40}{2014{b}}{{Yang and Chin}}{{}}} +\bibcite{Yang2014}{{41}{2014}{{Yang and Liu}}{{}}} +\bibcite{yick2008wireless}{{42}{2008}{{Yick, Mukherjee, and Ghosal}}{{}}} +\bibcite{Zhang05}{{43}{2005}{{Zhang and Hou}}{{}}} +\bibcite{zhou2009variable}{{44}{2009}{{Zhou, Das, and Gupta}}{{}}} +\bibcite{zorbas2010solving}{{45}{2010}{{Zorbas et~al.}}{{Zorbas, Glynos, Kotzanikolaou, and Douligeris}}} \endpage{20} \questionmark{} diff --git a/PeCO-EO/articleeo.bbl b/PeCO-EO/articleeo.bbl index dd24431..412c38f 100644 --- a/PeCO-EO/articleeo.bbl +++ b/PeCO-EO/articleeo.bbl @@ -1,4 +1,4 @@ -\begin{thebibliography}{42} +\begin{thebibliography}{45} \newcommand{\enquote}[1]{``#1''} \providecommand{\natexlab}[1]{#1} \providecommand{\url}[1]{\normalfont{#1}} @@ -115,6 +115,12 @@ Li, Mo, and Athanasios~V Vasilakos. 2013. ``A Survey on Topology Control in Wireless Sensor Networks: Taxonomy, Comparative Study, and Open Issues.'' \emph{Proceedings of the IEEE} 101 (12): 2538--2557. +\bibitem[Li et~al.(2011)Li, Vu, Ai, Chen, and Zhao]{li2011transforming} +Li, Yingshu, Chinh Vu, Chunyu Ai, Guantao Chen, and Yi~Zhao. 2011. + ``Transforming complete coverage algorithms to partial coverage algorithms + for wireless sensor networks.'' \emph{IEEE Transactions on Parallel and + Distributed Systems} 22 (4): 695--703. + \bibitem[Ling and Znati(2009)]{ling2009energy} Ling, Hui, and Taieb Znati. 2009. ``Energy efficient adaptive sensing for dynamic coverage in wireless sensor networks.'' In \emph{Wireless @@ -165,6 +171,12 @@ Singh, Alok, André Rossi, and Marc Sevaux. 2013. ``Metaheuristic approaches Varga, A. 2003. ``OMNeT++ Discrete Event Simulation System.'' \emph{Available: http://www.omnetpp.org} . +\bibitem[Vu et~al.(2009)Vu, Chen, Zhao, and Li]{vu2009universal} +Vu, Chinh, Guantao Chen, Yi~Zhao, and Yingshu Li. 2009. ``A universal framework + for partial coverage in Wireless Sensor Networks.'' In \emph{Performance + Computing and Communications Conference (IPCCC), 2009 IEEE 28th + International,} 1--8. IEEE. + \bibitem[Vu et~al.(2006)Vu, Gao, Deshmukh, and Li]{ChinhVu} Vu, Chinh, Shan Gao, Wiwek Deshmukh, and Yingshu Li. 2006. ``Distributed Energy-Efficient Scheduling Approach for K-Coverage in Wireless Sensor @@ -180,6 +192,11 @@ Vu, C.~T. 2009. ``Distributed energy-efficient solutions for area coverage Wang, Bang. 2011. ``Coverage problems in sensor networks: A survey.'' \emph{ACM Computing Surveys (CSUR)} 43 (4): 32--53. +\bibitem[Wang et~al.(2014)Wang, Yang, Lin, and Lin]{wang2014keeping} +Wang, Lei, Jui-Yu Yang, Yu-Yun Lin, and Wei-Jun Lin. 2014. ``Keeping Desired + QoS by a Partial Coverage Algorithm for Cluster-Based Wireless Sensor + Networks.'' \emph{Journal of Networks} 9 (12): 3221--3229. + \bibitem[Xing, Li, and Wang(2010)]{5714480} Xing, Xiaofei, Jie Li, and Guojun Wang. 2010. ``Integer Programming Scheme for Target Coverage in Heterogeneous Wireless Sensor Networks.'' In \emph{Mobile diff --git a/PeCO-EO/articleeo.blg b/PeCO-EO/articleeo.blg index d9e03c9..a69b1a0 100644 --- a/PeCO-EO/articleeo.blg +++ b/PeCO-EO/articleeo.blg @@ -1,47 +1,52 @@ -This is BibTeX, Version 0.99d (TeX Live 2015/dev/Debian) +This is BibTeX, Version 0.99d (TeX Live 2012/Debian) Capacity: max_strings=35307, hash_size=35307, hash_prime=30011 The top-level auxiliary file: articleeo.aux The style file: gENO.bst Database file #1: biblio.bib +Repeated entry---line 1064 of file biblio.bib + : @article{li2011transforming + : , +I'm skipping whatever remains of this entry Reallocated wiz_functions (elt_size=4) to 6000 items from 3000. -You've used 42 entries, +You've used 45 entries, 3679 wiz_defined-function locations, - 963 strings with 13444 characters, -and the built_in function-call counts, 29694 in all, are: -= -- 2431 -> -- 1533 + 980 strings with 14132 characters, +and the built_in function-call counts, 32279 in all, are: += -- 2639 +> -- 1697 < -- 4 -+ -- 747 -- -- 417 -* -- 2060 -:= -- 4333 -add.period$ -- 95 -call.type$ -- 42 -change.case$ -- 280 -chr.to.int$ -- 49 -cite$ -- 42 -duplicate$ -- 2249 -empty$ -- 2221 -format.name$ -- 521 -if$ -- 6088 ++ -- 837 +- -- 462 +* -- 2250 +:= -- 4701 +add.period$ -- 102 +call.type$ -- 45 +change.case$ -- 305 +chr.to.int$ -- 52 +cite$ -- 45 +duplicate$ -- 2431 +empty$ -- 2397 +format.name$ -- 575 +if$ -- 6615 int.to.chr$ -- 2 int.to.str$ -- 1 -missing$ -- 400 -newline$ -- 137 -num.names$ -- 168 -pop$ -- 1189 +missing$ -- 435 +newline$ -- 146 +num.names$ -- 180 +pop$ -- 1292 preamble$ -- 1 -purify$ -- 278 +purify$ -- 303 quote$ -- 0 -skip$ -- 1054 +skip$ -- 1135 stack$ -- 0 -substring$ -- 1239 -swap$ -- 1034 +substring$ -- 1347 +swap$ -- 1121 text.length$ -- 2 text.prefix$ -- 0 top$ -- 0 -type$ -- 375 +type$ -- 402 warning$ -- 0 -while$ -- 233 +while$ -- 252 width$ -- 0 -write$ -- 469 +write$ -- 503 +(There was 1 error message) diff --git a/PeCO-EO/articleeo.log b/PeCO-EO/articleeo.log index e5d325b..b51e886 100644 --- a/PeCO-EO/articleeo.log +++ b/PeCO-EO/articleeo.log @@ -1,21 +1,12 @@ -This is pdfTeX, Version 3.1415926-2.4-1.40.13 (TeX Live 2012/Debian) (format=pdflatex 2015.7.3) 28 SEP 2015 10:31 +This is pdfTeX, Version 3.1415926-2.4-1.40.13 (TeX Live 2012/Debian) (format=pdflatex 2013.9.3) 28 SEP 2015 10:48 entering extended mode restricted \write18 enabled. %&-line parsing enabled. **articleeo.tex (./articleeo.tex LaTeX2e <2011/06/27> -Babel and hyphenation patterns for english, dumylang, nohyphenation, et -hiopic, farsi, arabic, pinyin, croatian, bulgarian, ukrainian, russian, slovak, - czech, danish, dutch, usenglishmax, ukenglish, finnish, french, basque, ngerma -n, german, swissgerman, ngerman-x-2012-05-30, german-x-2012-05-30, monogreek, g -reek, ibycus, ancientgreek, hungarian, bengali, tamil, hindi, telugu, gujarati, - sanskrit, malayalam, kannada, assamese, marathi, oriya, panjabi, italian, lati -n, latvian, lithuanian, mongolian, mongolianlmc, nynorsk, bokmal, indonesian, e -speranto, coptic, welsh, irish, interlingua, serbian, serbianc, slovenian, friu -lan, romansh, estonian, romanian, armenian, uppersorbian, turkish, afrikaans, i -celandic, kurmanji, polish, portuguese, galician, catalan, spanish, swedish, th -ai, loaded. +Babel and hyphenation patterns for english, dumylang, nohyphenation, lo +aded. (./gENO2e.cls Document Class: gENO2e 2013/04/29 v4.1 Engineering Optimization LaTeX2e documen t class @@ -575,10 +566,10 @@ LaTeX Font Warning: Font shape `OT1/cmr/bx/sc' undefined (Font) using `OT1/cmr/bx/n' instead on input line 221. Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-20 10:11:12 (epstopdf) size: 358485 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:28:55 +(epstopdf) date: 2015-02-20 10:12:43 (epstopdf) size: 78307 bytes (epstopdf) Command: @@ -591,10 +582,10 @@ File: figure1a-eps-converted-to.pdf Graphic file (type pdf) Package pdftex.def Info: figure1a-eps-converted-to.pdf used on input line 269. (pdftex.def) Requested size: 213.39566pt x 202.1362pt. Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-20 10:11:12 (epstopdf) size: 241675 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:28:55 +(epstopdf) date: 2015-02-20 10:12:44 (epstopdf) size: 57181 bytes (epstopdf) Command: @@ -657,10 +648,10 @@ Overfull \vbox (701.0pt too high) has occurred while \output is active [] [5 <./figure1a-eps-converted-to.pdf> <./figure1b-eps-converted-to.pdf>] Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-20 10:11:12 (epstopdf) size: 508784 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:28:56 +(epstopdf) date: 2015-02-20 10:12:44 (epstopdf) size: 138861 bytes (epstopdf) Command: @@ -674,10 +665,10 @@ File: figure2-eps-converted-to.pdf Graphic file (type pdf) Package pdftex.def Info: figure2-eps-converted-to.pdf used on input line 312. (pdftex.def) Requested size: 398.99872pt x 200.66864pt. Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-20 10:11:12 (epstopdf) size: 196938 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:28:57 +(epstopdf) date: 2015-02-20 10:12:45 (epstopdf) size: 48639 bytes (epstopdf) Command: @@ -720,10 +711,10 @@ Overfull \vbox (701.0pt too high) has occurred while \output is active [] [6 <./figure2-eps-converted-to.pdf>] Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-20 10:11:12 (epstopdf) size: 428048 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:28:58 +(epstopdf) date: 2015-02-20 10:12:45 (epstopdf) size: 76496 bytes (epstopdf) Command: @@ -915,10 +906,10 @@ Overfull \vbox (701.0pt too high) has occurred while \output is active [] [12] Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-06 11:42:02 (epstopdf) size: 29526 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:28:59 +(epstopdf) date: 2015-02-20 10:12:46 (epstopdf) size: 12638 bytes (epstopdf) Command: @@ -936,10 +927,10 @@ Package pdftex.def Info: figure5-eps-converted-to.pdf used on input line 831. LaTeX Warning: `!h' float specifier changed to `!ht'. Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-06 11:42:02 (epstopdf) size: 29515 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:28:59 +(epstopdf) date: 2015-02-20 10:12:46 (epstopdf) size: 12695 bytes (epstopdf) Command: @@ -983,27 +974,29 @@ Overfull \vbox (29.0pt too high) has occurred while \output is active [] Overfull \vbox (701.0pt too high) has occurred while \output is active [] [13] - -LaTeX Warning: File `ESR.eps' not found on input line 864. - Package epstopdf Info: Source file: +(epstopdf) date: 2015-09-28 10:36:28 +(epstopdf) size: 29552 bytes (epstopdf) Output file: +(epstopdf) date: 2015-09-28 10:36:41 +(epstopdf) size: 12896 bytes (epstopdf) Command: (epstopdf) \includegraphics on input line 864. Package epstopdf Info: Output file is already uptodate. -! Package pdftex.def Error: File `ESR-eps-converted-to.pdf' not found. + +File: ESR-eps-converted-to.pdf Graphic file (type pdf) + + +Package pdftex.def Info: ESR-eps-converted-to.pdf used on input line 864. +(pdftex.def) Requested size: 242.40503pt x 175.15395pt. + + +LaTeX Warning: `!h' float specifier changed to `!ht'. + -See the pdftex.def package documentation for explanation. -Type H for immediate help. - ... - -l.864 \includegraphics[scale=0.5]{ESR.eps} - %\\~ ~ ~(a) -Using draft setting for this image. -Try typing to proceed. -If that doesn't work, type X to quit. +Underfull \vbox (badness 2042) has occurred while \output is active [] Underfull \vbox (badness 10000) has occurred while \output is active [] @@ -1031,10 +1024,10 @@ Overfull \vbox (701.0pt too high) has occurred while \output is active [] [14 <./figure5-eps-converted-to.pdf> <./figure6-eps-converted-to.pdf>] Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-06 11:42:02 (epstopdf) size: 24136 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:28:59 +(epstopdf) date: 2015-02-20 10:12:46 (epstopdf) size: 8179 bytes (epstopdf) Command: @@ -1048,10 +1041,10 @@ File: figure7a-eps-converted-to.pdf Graphic file (type pdf) Package pdftex.def Info: figure7a-eps-converted-to.pdf used on input line 892. (pdftex.def) Requested size: 246.92189pt x 175.15395pt. Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-06 11:42:02 (epstopdf) size: 24138 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:29:00 +(epstopdf) date: 2015-02-20 10:12:47 (epstopdf) size: 8180 bytes (epstopdf) Command: @@ -1065,59 +1058,37 @@ File: figure7b-eps-converted-to.pdf Graphic file (type pdf) Package pdftex.def Info: figure7b-eps-converted-to.pdf used on input line 893. (pdftex.def) Requested size: 246.92189pt x 175.15395pt. -Underfull \vbox (badness 10000) has occurred while \output is active [] - - -Underfull \vbox (badness 10000) has occurred while \output is active [] +LaTeX Warning: `!h' float specifier changed to `!ht'. -Underfull \vbox (badness 10000) has occurred while \output is active [] - - -Overfull \vbox (36.0pt too high) has occurred while \output is active [] - - -Overfull \vbox (36.0pt too high) has occurred while \output is active [] - - -Overfull \vbox (650.43pt too high) has occurred while \output is active [] - - -Overfull \vbox (29.0pt too high) has occurred while \output is active [] - - -Overfull \vbox (701.0pt too high) has occurred while \output is active [] - - [15 <./figure7a-eps-converted-to.pdf> <./figure7b-eps-converted-to.pdf>] Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-06 11:42:03 (epstopdf) size: 24103 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:29:00 +(epstopdf) date: 2015-02-20 10:12:47 (epstopdf) size: 8351 bytes (epstopdf) Command: (epstopdf) \includegraphics on input line 916. Package epstopdf Info: Output file is already uptodate. - - + File: figure8a-eps-converted-to.pdf Graphic file (type pdf) Package pdftex.def Info: figure8a-eps-converted-to.pdf used on input line 916. (pdftex.def) Requested size: 246.92189pt x 175.15395pt. Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-02-06 11:42:03 (epstopdf) size: 24855 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:29:01 +(epstopdf) date: 2015-02-20 10:12:47 (epstopdf) size: 8466 bytes (epstopdf) Command: (epstopdf) \includegraphics on input line 917. Package epstopdf Info: Output file is already uptodate. - + File: figure8b-eps-converted-to.pdf Graphic file (type pdf) @@ -1125,16 +1096,7 @@ Package pdftex.def Info: figure8b-eps-converted-to.pdf used on input line 917. (pdftex.def) Requested size: 246.92189pt x 175.15395pt. -Package natbib Warning: Citation `li2011transforming' on page 16 undefined on i -nput line 931. - - -Package natbib Warning: Citation `vu2009universal' on page 16 undefined on inpu -t line 931. - - -Package natbib Warning: Citation `wang2014keeping' on page 16 undefined on inpu -t line 931. +LaTeX Warning: `!h' float specifier changed to `!ht'. Underfull \vbox (badness 10000) has occurred while \output is active [] @@ -1160,25 +1122,35 @@ Overfull \vbox (29.0pt too high) has occurred while \output is active [] Overfull \vbox (701.0pt too high) has occurred while \output is active [] - [16 <./figure8a-eps-converted-to.pdf> <./figure8b-eps-converted-to.pdf>] + [15 <./ESR-eps-converted-to.pdf>] Package epstopdf Info: Source file: -(epstopdf) date: 2015-09-23 17:13:18 +(epstopdf) date: 2015-09-28 10:13:03 (epstopdf) size: 26999 bytes (epstopdf) Output file: -(epstopdf) date: 2015-09-28 10:29:01 +(epstopdf) date: 2015-09-28 10:24:52 (epstopdf) size: 7928 bytes (epstopdf) Command: (epstopdf) \includegraphics on input line 937. Package epstopdf Info: Output file is already uptodate. - + File: figure9-eps-converted-to.pdf Graphic file (type pdf) Package pdftex.def Info: figure9-eps-converted-to.pdf used on input line 937. (pdftex.def) Requested size: 266.647pt x 192.6704pt. + +LaTeX Warning: `!h' float specifier changed to `!ht'. + + +LaTeX Warning: `h' float specifier changed to `ht'. + + +Underfull \vbox (badness 10000) has occurred while \output is active [] + + Underfull \vbox (badness 10000) has occurred while \output is active [] @@ -1202,13 +1174,32 @@ Overfull \vbox (29.0pt too high) has occurred while \output is active [] Overfull \vbox (701.0pt too high) has occurred while \output is active [] - [17 <./figure9-eps-converted-to.pdf>] (./articleeo.bbl -Underfull \hbox (badness 6658) in paragraph at lines 48--50 -[]\OT1/cmr/m/n/10 CPLEX, Op-ti-mizer. 2010. ``IBM ILOG CPLEX Op-ti-mizer.'' \OT -1/cmr/m/it/10 Avail-able: http://www- - [] + [16 <./figure7a-eps-converted-to.pdf> <./figure7b-eps-converted-to.pdf>] +Underfull \vbox (badness 10000) has occurred while \output is active [] + + +Underfull \vbox (badness 10000) has occurred while \output is active [] + + +Underfull \vbox (badness 10000) has occurred while \output is active [] + + +Overfull \vbox (36.0pt too high) has occurred while \output is active [] + + +Overfull \vbox (36.0pt too high) has occurred while \output is active [] + + +Overfull \vbox (650.43pt too high) has occurred while \output is active [] + +Overfull \vbox (29.0pt too high) has occurred while \output is active [] + + +Overfull \vbox (701.0pt too high) has occurred while \output is active [] + [17 <./figure8a-eps-converted-to.pdf> <./figure8b-eps-converted-to.pdf> <./fig +ure9-eps-converted-to.pdf>] (./articleeo.bbl Underfull \vbox (badness 10000) has occurred while \output is active [] @@ -1233,17 +1224,15 @@ Overfull \vbox (29.0pt too high) has occurred while \output is active [] Overfull \vbox (701.0pt too high) has occurred while \output is active [] [18] -Underfull \hbox (badness 4024) in paragraph at lines 124--126 -[]\OT1/cmr/m/n/10 Makhorin, An-drew. 2012. ``The GLPK (GNU Lin-ear Pro-gram-min -g Kit).'' \OT1/cmr/m/it/10 Avail-able: +Underfull \hbox (badness 6658) in paragraph at lines 48--50 +[]\OT1/cmr/m/n/10 CPLEX, Op-ti-mizer. 2010. ``IBM ILOG CPLEX Op-ti-mizer.'' \OT +1/cmr/m/it/10 Avail-able: http://www- [] -Missing character: There is no à in font cmr10! -Missing character: There is no © in font cmr10! -Underfull \hbox (badness 10000) in paragraph at lines 165--167 -[]\OT1/cmr/m/n/10 Varga, A. 2003. ``OM-NeT++ Dis-crete Event Sim-u-la-tion Sys- -tem.'' \OT1/cmr/m/it/10 Avail-able: +Underfull \hbox (badness 4024) in paragraph at lines 130--132 +[]\OT1/cmr/m/n/10 Makhorin, An-drew. 2012. ``The GLPK (GNU Lin-ear Pro-gram-min +g Kit).'' \OT1/cmr/m/it/10 Avail-able: [] @@ -1273,11 +1262,16 @@ Overfull \vbox (29.0pt too high) has occurred while \output is active [] Overfull \vbox (701.0pt too high) has occurred while \output is active [] - [19]) - -Package natbib Warning: There were undefined citations. + [19] +Missing character: There is no à in font cmr10! +Missing character: There is no © in font cmr10! +Underfull \hbox (badness 10000) in paragraph at lines 171--173 +[]\OT1/cmr/m/n/10 Varga, A. 2003. ``OM-NeT++ Dis-crete Event Sim-u-la-tion Sys- +tem.'' \OT1/cmr/m/it/10 Avail-able: + [] +) Underfull \vbox (badness 10000) has occurred while \output is active [] @@ -1312,12 +1306,12 @@ LaTeX Font Warning: Some font shapes were not available, defaults substituted. ) Here is how much of TeX's memory you used: - 4867 strings out of 493485 - 63454 string characters out of 3143527 - 151260 words of memory out of 3000000 - 8083 multiletter control sequences out of 15000+200000 - 14728 words of font info for 57 fonts, out of 3000000 for 9000 - 957 hyphenation exceptions out of 8191 + 4874 strings out of 495059 + 63696 string characters out of 3182031 + 150122 words of memory out of 3000000 + 7967 multiletter control sequences out of 15000+200000 + 14560 words of font info for 56 fonts, out of 3000000 for 9000 + 14 hyphenation exceptions out of 8191 41i,19n,27p,963b,385s stack positions out of 5000i,500n,10000p,200000b,50000s -Output written on articleeo.pdf (20 pages, 764420 bytes). +nts/symbols/msbm10.pfb> +Output written on articleeo.pdf (20 pages, 763694 bytes). PDF statistics: - 220 PDF objects out of 1000 (max. 8388607) - 150 compressed objects within 2 object streams + 222 PDF objects out of 1000 (max. 8388607) + 151 compressed objects within 2 object streams 0 named destinations out of 1000 (max. 500000) - 61 words of extra memory for PDF output out of 10000 (max. 10000000) + 66 words of extra memory for PDF output out of 10000 (max. 10000000) diff --git a/PeCO-EO/articleeo.pdf b/PeCO-EO/articleeo.pdf index bfcd32c..3af0e9d 100644 Binary files a/PeCO-EO/articleeo.pdf and b/PeCO-EO/articleeo.pdf differ diff --git a/PeCO-EO/articleeo.tex b/PeCO-EO/articleeo.tex index 0d70e08..317f168 100644 --- a/PeCO-EO/articleeo.tex +++ b/PeCO-EO/articleeo.tex @@ -506,7 +506,8 @@ $RE_k$, which must be greater than a threshold $E_{th}$ in order to participate in the current period. Each sensor node determines its position and its subregion using an embedded GPS or a location discovery algorithm. After that, all the sensors collect position coordinates, remaining energy, sensor node ID, -and the number of their one-hop live neighbors during the information exchange. \textcolor{blue}{We suppose that both INFO packet and ActiveSleep packet contain two parts: header and data payload. The sensor id is included in the header, where the header size is 8 bits. The data part includes position coordinates (64 bits), remaining energy (32 bits), and the number of their one-hop live neighbors (8 bits). Therefore the size of the INFO packet is 112 bits. The ActiveSleep packet is 16 bits size, 8 bits for the header and 8 bits for data part that includes only sensor status (0 or 1)} +and the number of their one-hop live neighbors during the information exchange. +\textcolor{blue}{Both INFO packet and ActiveSleep packet contain two parts: header and data payload. The sensor ID is included in the header, where the header size is 8 bits. The data part includes position coordinates (64 bits), remaining energy (32 bits), and the number of one-hop live neighbors (8 bits). Therefore the size of the INFO packet is 112 bits. The ActiveSleep packet is 16 bits size, 8 bits for the header and 8 bits for data part that includes only sensor status (0 or 1).} The sensors inside a same region cooperate to elect a leader. The selection criteria for the leader are (in order of priority): \begin{enumerate} @@ -719,7 +720,7 @@ approach. of sensors in the network. \item {\bf \textcolor{blue}{Energy Saving Ratio (ESR)}}: -\textcolor{blue}{we consider a performance metric linked to energy. This metric, called Energy Saving Ratio (ESR), is defined by: +\textcolor{blue}{this metric, which shows the ability of a protocol to save energy, is defined by: \begin{equation*} \scriptsize \mbox{ESR}(\%) = \frac{\mbox{Number of alive sensors during this round}} @@ -854,8 +855,26 @@ keeping a greater coverage ratio as shown in Figure \ref{figure5}. \subsubsection{\textcolor{blue}{Energy Saving Ratio (ESR)}} -\textcolor{blue}{In this experiment, we consider an Energy Saving Ratio (see Figure~\ref{fig5}) for 200 deployed nodes. -The longer the ratio is, the more redundant sensor nodes are switched off, and consequently the longer the network may live. } +%\textcolor{blue}{In this experiment, we study the energy saving ratio, see Figure~\ref{fig5}, for 200 deployed nodes. +%The larger the ratio is, the more redundant sensor nodes are switched off, and consequently the longer the network may liv%e. } + +\textcolor{blue}{The simulation results show that our protocol PeCO allows to + efficiently save energy by turning off some sensors during the sensing phase. + As shown in Figure~\ref{fig5}, GAF provides better energy saving than PeCO for + the first fifty rounds, because GAF balances the energy consumption among + sensor nodes inside each small fixed grid and thus permits to extend the life of + sensors in each grid fairly but in the same time turn on large number of + sensors during sensing that lead later to quickly deplete sensor's batteries + together. + + After that GAF provide less energy saving compared with other + approaches because of the large number of dead nodes. DESK algorithm shows less + energy saving compared with other approaches due to activate a large number of + sensors during the sensing. DiLCO protocol provides less energy saving ratio + compared with PeCO because it generally activate a larger number of sensor + nodes during sensing. Note that again as the number of rounds increases PeCO + becomes the most performing one, since it consumes less energy compared with + other approaches.} \begin{figure}[h!] %\centering @@ -866,8 +885,6 @@ The longer the ratio is, the more redundant sensor nodes are switched off, \label{fig5} \end{figure} -\textcolor{blue}{The simulation results show that our protocol PeCO allows to efficiently save energy by turning off some sensors during the sensing phase. -As shown in Figure~\ref{fig5}, GAF provides better energy saving than PeCO for the first fifty rounds, because GAF balance the energy consumption among sensor nodes inside each small fixed grid that permits to extend the life of sensors in each grid fairly but in the same time turn on large number of sensors during sensing that lead later to quickly deplete sensor's batteries togehter. After that GAF provide less energy saving compared with other approches because of the large number of dead nodes. DESK algorithm shows less energy saving compared with other approaches due to activate a larg number of sensors during the sensing. DiLCO protocol provides less energy saving ratio commpared with PeCO because it generally activate a larger number of sensor nodes during sensing. Note that again as the number of rounds increases PeCO becomes the most performing one, since it consumes less energy compared with other approaches.} \subsubsection{Energy Consumption} @@ -1013,6 +1030,6 @@ received support. This work is also partially funded by the Labex ACTION program (contract ANR-11-LABX-01-01). \bibliographystyle{gENO} -\bibliography{articleeo} % biblio +\bibliography{biblio} %articleeo \end{document} diff --git a/PeCO-EO/articleeo.tex~ b/PeCO-EO/articleeo.tex~ index d4ae9d9..ab832ae 100644 --- a/PeCO-EO/articleeo.tex~ +++ b/PeCO-EO/articleeo.tex~ @@ -5,6 +5,7 @@ %\usepackage[linesnumbered,ruled,vlined,commentsnumbered]{algorithm2e} %\renewcommand{\algorithmcfname}{ALGORITHM} \usepackage{indentfirst} +\usepackage{color} \usepackage[algo2e,ruled,vlined]{algorithm2e} \begin{document} @@ -15,7 +16,7 @@ \title{{\itshape Perimeter-based Coverage Optimization \\ to Improve Lifetime in Wireless Sensor Networks}} -\author{Ali Kadhum Idrees$^{a,b}$, Karine Deschinkel$^{a}$$^{\ast}$\thanks{$^\ast$Corresponding author. Email: karine.deschinkel@univ-fcomte.fr}, Michel Salomon$^{a}$ and Rapha\"el Couturier $^{a}$ +\author{Ali Kadhum Idrees$^{a,b}$, Karine Deschinkel$^{a}$$^{\ast}$\thanks{$^\ast$Corresponding author. Email: karine.deschinkel@univ-fcomte.fr}, Michel Salomon$^{a}$, and Rapha\"el Couturier $^{a}$ $^{a}${\em{FEMTO-ST Institute, UMR 6174 CNRS, \\ University Bourgogne Franche-Comt\'e, Belfort, France}} \\ $^{b}${\em{Department of Computer Science, University of Babylon, Babylon, Iraq}} @@ -36,7 +37,7 @@ distributed among sensor nodes in each subregion. The novelty of our approach lies essentially in the formulation of a new mathematical optimization model based on the perimeter coverage level to schedule sensors' activities. Extensive simulation experiments demonstrate that PeCO can offer longer lifetime -coverage for WSNs in comparison with some other protocols. +coverage for WSNs compared to other protocols. \begin{keywords} Wireless Sensor Networks, Area Coverage, Energy efficiency, Optimization, Scheduling. @@ -48,34 +49,34 @@ coverage for WSNs in comparison with some other protocols. \label{sec:introduction} The continuous progress in Micro Electro-Mechanical Systems (MEMS) and wireless -communication hardware has given rise to the opportunity to use large networks +communication hardware has given rise to the opportunity of using large networks of tiny sensors, called Wireless Sensor Networks (WSN)~\citep{akyildiz2002wireless,puccinelli2005wireless}, to fulfill monitoring tasks. A WSN consists of small low-powered sensors working together by communicating with one another through multi-hop radio communications. Each node can send the data it collects in its environment, thanks to its sensor, to the -user by means of sink nodes. The features of a WSN made it suitable for a wide -range of application in areas such as business, environment, health, industry, +user by means of sink nodes. The features of a WSN makes it suitable for a wide +range of applications in areas such as business, environment, health, industry, military, and so on~\citep{yick2008wireless}. Typically, a sensor node contains three main components~\citep{anastasi2009energy}: a sensing unit able to measure physical, chemical, or biological phenomena observed in the environment; a processing unit which will process and store the collected measurements; a radio -communication unit for data transmission and receiving. +communication unit for data transmission and reception. The energy needed by an active sensor node to perform sensing, processing, and -communication is supplied by a power supply which is a battery. This battery has +communication is provided by a power supply which is a battery. This battery has a limited energy provision and it may be unsuitable or impossible to replace or -recharge it in most applications. Therefore it is necessary to deploy WSN with -high density in order to increase reliability and to exploit node redundancy -thanks to energy-efficient activity scheduling approaches. Indeed, the overlap -of sensing areas can be exploited to schedule alternatively some sensors in a -low power sleep mode and thus save energy. Overall, the main question that must -be answered is: how to extend the lifetime coverage of a WSN as long as possible -while ensuring a high level of coverage? These past few years many +recharge in most applications. Therefore it is necessary to deploy WSN with high +density in order to increase reliability and to exploit node redundancy thanks +to energy-efficient activity scheduling approaches. Indeed, the overlap of +sensing areas can be exploited to schedule alternatively some sensors in a low +power sleep mode and thus save energy. Overall, the main question that must be +answered is: how is it possible to extend the lifetime coverage of a WSN as long +as possible while ensuring a high level of coverage? These past few years many energy-efficient mechanisms have been suggested to retain energy and extend the lifetime of the WSNs~\citep{rault2014energy}. -This paper makes the following contributions. +This paper makes the following contributions : \begin{enumerate} \item A framework is devised to schedule nodes to be activated alternatively such that the network lifetime is prolonged while ensuring that a certain @@ -88,13 +89,13 @@ This paper makes the following contributions. architecture. \item A new mathematical optimization model is proposed. Instead of trying to cover a set of specified points/targets as in most of the methods proposed in - the literature, we formulate an integer program based on perimeter coverage of - each sensor. The model involves integer variables to capture the deviations - between the actual level of coverage and the required level. Hence, an - optimal schedule will be obtained by minimizing a weighted sum of these - deviations. + the literature, we formulate a mixed-integer program based on the perimeter + coverage of each sensor. The model involves integer variables to capture the + deviations between the actual level of coverage and the required level. + Hence, an optimal schedule will be obtained by minimizing a weighted sum of + these deviations. \item Extensive simulation experiments are conducted using the discrete event - simulator OMNeT++, to demonstrate the efficiency of our protocol. We have + simulator OMNeT++, to demonstrate the efficiency of our protocol. We have compared the PeCO protocol to two approaches found in the literature: DESK~\citep{ChinhVu} and GAF~\citep{xu2001geography}, and also to our previous protocol DiLCO published in~\citep{Idrees2}. DiLCO uses the same framework as @@ -125,12 +126,12 @@ to the objective of coverage for a finite number of discrete points called targets, and barrier coverage~\citep{HeShibo,kim2013maximum} focuses on preventing intruders from entering into the region of interest. In \citep{Deng2012} authors transform the area coverage problem into the target -coverage one taking into account the intersection points among disks of sensors -nodes or between disk of sensor nodes and boundaries. In -\citep{Huang:2003:CPW:941350.941367} authors prove that if the perimeters of -sensors are sufficiently covered it will be the case for the whole area. They -provide an algorithm in $O(nd~log~d)$ time to compute the perimeter-coverage of -each sensor. $d$ denotes the maximum number of sensors that are neighbors to a +coverage one, taking into account the intersection points among disks of sensors +nodes or between disks of sensor nodes and boundaries. In +\citep{huang2005coverage} authors prove that if the perimeters of the sensors +are sufficiently covered it will be the case for the whole area. They provide an +algorithm in $O(nd~log~d)$ time to compute the perimeter-coverage of each +sensor. $d$ denotes the maximum number of sensors that are neighbors to a sensor, and $n$ is the total number of sensors in the network. {\it In PeCO protocol, instead of determining the level of coverage of a set of discrete points, our optimization model is based on checking the perimeter-coverage of @@ -139,7 +140,7 @@ sensor, and $n$ is the total number of sensors in the network. {\it In PeCO The major approach to extend network lifetime while preserving coverage is to divide/organize the sensors into a suitable number of set covers (disjoint or non-disjoint) \citep{wang2011coverage}, where each set completely covers a -region of interest, and to activate these set covers successively. The network +region of interest, and to successively activate these set covers. The network activity can be planned in advance and scheduled for the entire network lifetime or organized in periods, and the set of active sensor nodes decided at the beginning of each period \citep{ling2009energy}. In fact, many authors propose @@ -162,22 +163,22 @@ algorithms~\citep{ChinhVu,qu2013distributed,yangnovel} each sensor decides of its own activity scheduling after an information exchange with its neighbors. The main interest of such an approach is to avoid long range communications and thus to reduce the energy dedicated to the communications. Unfortunately, since -each node has only information on its immediate neighbors (usually the one-hop -ones) it may make a bad decision leading to a global suboptimal solution. +each node has information on its immediate neighbors only (usually the one-hop +ones), it may make a bad decision leading to a global suboptimal solution. Conversely, centralized algorithms~\citep{cardei2005improving,zorbas2010solving,pujari2011high} always -provide nearly or close to optimal solution since the algorithm has a global -view of the whole network. The disadvantage of a centralized method is obviously -its high cost in communications needed to transmit to a single node, the base -station which will globally schedule nodes' activities, data from all the other -sensor nodes in the area. The price in communications can be huge since long -range communications will be needed. In fact the larger the WSN, the higher the +provide nearly optimal solutions since the algorithm has a global view of the +whole network. The disadvantage of a centralized method is obviously its high +cost in communications needed to transmit to a single node, the base station +which will globally schedule nodes' activities, data from all the other sensor +nodes in the area. The price in communications can be huge since long range +communications will be needed. In fact the larger the WSN, the higher the communication energy cost. {\it In order to be suitable for large-scale - networks, in PeCO protocol the area of interest is divided into several + networks, in the PeCO protocol the area of interest is divided into several smaller subregions, and in each one, a node called the leader is in charge of - selecting the active sensors for the current period. Thus PeCO protocol is - scalable and a globally distributed method, whereas it is centralized in each - subregion.} + selecting the active sensors for the current period. Thus the PeCO protocol + is scalable and a globally distributed method, whereas it is centralized in + each subregion.} Various coverage scheduling algorithms have been developed these past few years. Many of them, dealing with the maximization of the number of cover sets, are @@ -195,27 +196,27 @@ practiced techniques for solving linear programs with too many variables, have also been used~\citep{castano2013column,doi:10.1080/0305215X.2012.687732,deschinkel2012column}. {\it In the PeCO protocol, each leader, in charge of a subregion, solves an - integer program which has a twofold objective: minimize the overcoverage and + integer program which has a twofold objective: minimizing the overcoverage and the undercoverage of the perimeter of each sensor.} The authors in \citep{Idrees2} propose a Distributed Lifetime Coverage Optimization (DiLCO) protocol, which maintains the coverage and improves the lifetime in WSNs. It is an improved version of a research work presented in~\citep{idrees2014coverage}. First, the area of interest is partitioned into -subregions using a divide-and-conquer method. DiLCO protocol is then distributed -on the sensor nodes in each subregion in a second step. Hence this protocol -combines two techniques: a leader election in each subregion, followed by an -optimization-based node activity scheduling performed by each elected +subregions using a divide-and-conquer method. The DiLCO protocol is then +distributed on the sensor nodes in each subregion in a second step. Hence this +protocol combines two techniques: a leader election in each subregion, followed +by an optimization-based node activity scheduling performed by each elected leader. The proposed DiLCO protocol is a periodic protocol where each period is decomposed into 4 phases: information exchange, leader election, decision, and sensing. The simulations show that DiLCO is able to increase the WSN lifetime and provides improved coverage performance. {\it In the PeCO protocol, a new mathematical optimization model is proposed. Instead of trying to cover a set - of specified points/targets as in DiLCO protocol, we formulate an integer - program based on perimeter coverage of each sensor. The model involves integer - variables to capture the deviations between the actual level of coverage and - the required level. The idea is that an optimal scheduling will be obtained by - minimizing a weighted sum of these deviations.} + of specified points/targets as in the DiLCO protocol, we formulate an integer + program based on the perimeter coverage of each sensor. The model involves + integer variables to capture the deviations between the actual level of + coverage and the required level. The idea is that an optimal scheduling will + be obtained by minimizing a weighted sum of these deviations.} \section{ The P{\scshape e}CO Protocol Description} \label{sec:The PeCO Protocol Description} @@ -280,7 +281,7 @@ west side of sensor~$u$, with the following respective coordinates in the sensing area~: $(v_x,v_y)$ and $(u_x,u_y)$. From the previous coordinates the euclidean distance between nodes~$u$ and $v$ is computed as follows: $$ - Dist(u,v)=\sqrt{\vert u_x - v_x \vert^2 + \vert u_y-v_y \vert^2}, + Dist(u,v)=\sqrt{(u_x - v_x)^2 + (u_y-v_y)^2}, $$ while the angle~$\alpha$ is obtained through the formula: \[ @@ -342,7 +343,7 @@ above is thus given by the sixth line of the table. \end{table} In the PeCO protocol, the scheduling of the sensor nodes' activities is -formulated with an mixed-integer program based on coverage +formulated with a mixed-integer program based on coverage intervals~\citep{doi:10.1155/2010/926075}. The formulation of the coverage optimization problem is detailed in~Section~\ref{cp}. Note that when a sensor node has a part of its sensing range outside the WSN sensing field, as in @@ -396,13 +397,13 @@ of the application. \label{figure4} \end{figure} -We define two types of packets to be used by PeCO protocol: +We define two types of packets to be used by the PeCO protocol: \begin{itemize} \item INFO packet: sent by each sensor node to all the nodes inside a same subregion for information exchange. \item ActiveSleep packet: sent by the leader to all the nodes in its subregion to transmit to them their respective status (stay Active or go Sleep) during - sensing phase. + the sensing phase. \end{itemize} Five statuses are possible for a sensor node in the network: @@ -505,16 +506,16 @@ $RE_k$, which must be greater than a threshold $E_{th}$ in order to participate in the current period. Each sensor node determines its position and its subregion using an embedded GPS or a location discovery algorithm. After that, all the sensors collect position coordinates, remaining energy, sensor node ID, -and the number of their one-hop live neighbors during the information exchange. +and the number of their one-hop live neighbors during the information exchange. \textcolor{blue}{We suppose that both INFO packet and ActiveSleep packet contain two parts: header and data payload. The sensor id is included in the header, where the header size is 8 bits. The data part includes position coordinates (64 bits), remaining energy (32 bits), and the number of their one-hop live neighbors (8 bits). Therefore the size of the INFO packet is 112 bits. The ActiveSleep packet is 16 bits size, 8 bits for the header and 8 bits for data part that includes only sensor status (0 or 1)} The sensors inside a same region cooperate to elect a leader. The selection criteria for the leader are (in order of priority): \begin{enumerate} \item larger number of neighbors; \item larger remaining energy; -\item and then in case of equality, larger index. +\item and then, in case of equality, larger indexes. \end{enumerate} Once chosen, the leader collects information to formulate and solve the integer -program which allows to construct the set of active sensors in the sensing +program which allows to build the set of active sensors in the sensing stage. \section{Perimeter-based Coverage Problem Formulation} @@ -536,7 +537,7 @@ First, the following sets: \item $I_j$ designates the set of coverage intervals (CI) obtained for sensor~$j$. \end{itemize} -$I_j$ refers to the set of coverage intervals which have been defined according +$I_j$ refers to the set of coverage intervals which has been defined according to the method introduced in Subsection~\ref{CI}. For a coverage interval $i$, let $a^j_{ik}$ denote the indicator function of whether sensor~$k$ is involved in coverage interval~$i$ of sensor~$j$, that is: @@ -610,10 +611,10 @@ $V_{i}^{j}=l^{i}-l$. $\alpha^j_i$ and $\beta^j_i$ are nonnegative weights selected according to the relative importance of satisfying the associated level of coverage. For example, -weights associated with coverage intervals of a specified part of a region may +weights associated with coverage intervals of the specified part of a region may be given by a relatively larger magnitude than weights associated with another region. This kind of mixed-integer program is inspired from the model developed -for brachytherapy treatment planning for optimizing dose distribution +for brachytherapy treatment planning to optimize dose distribution \citep{0031-9155-44-1-012}. The choice of the values for variables $\alpha$ and $\beta$ should be made according to the needs of the application. $\alpha$ should be large enough to prevent undercoverage and so to reach the highest @@ -667,10 +668,10 @@ coverage task. This value corresponds to the energy needed by the sensing phase, obtained by multiplying the energy consumed in the active state (9.72 mW) with the time in seconds for one period (3600 seconds), and adding the energy for the pre-sensing phases. According to the interval of initial energy, a sensor may -be active during at most 20 periods. Information exchange to update the coverage +be active during at most 20 periods. the information exchange to update the coverage is executed every hour, but the length of the sensing period could be reduced -and adapted dynamically. On the one hand a small sensing period would allow to -be more reliable but would have result in higher communication costs. On the +and adapted dynamically. On the one hand a small sensing period would allow the network to +be more reliable but would have resulted in higher communication costs. On the other hand the choice of a long duration may cause problems in case of nodes failure during the sensing period. @@ -681,7 +682,7 @@ so as to prevent the non-coverage for the interval~$i$ of the sensor~$j$. On the other hand, $\beta^j_i$ is assigned to a value which is slightly lower so as to minimize the number of active sensor nodes which contribute in covering the interval. Subsection~\ref{sec:Impact} investigates more deeply how the values of -both parameters affect the performance of PeCO protocol. +both parameters affect the performance of the PeCO protocol. The following performance metrics are used to evaluate the efficiency of the approach. @@ -716,6 +717,15 @@ approach. where $|A_r^p|$ is the number of active sensors in the subregion $r$ in the sensing period~$p$, $R$ is the number of subregions, and $|J|$ is the number of sensors in the network. + +\item {\bf \textcolor{blue}{Energy Saving Ratio (ESR)}}: +\textcolor{blue}{we consider a performance metric linked to energy. This metric, called Energy Saving Ratio (ESR), is defined by: +\begin{equation*} +\scriptsize +\mbox{ESR}(\%) = \frac{\mbox{Number of alive sensors during this round}} +{\mbox{Total number of sensors in the network}} \times 100. +\end{equation*} + } \item {\bf Energy Consumption (EC)}: energy consumption can be seen as the total energy consumed by the sensors during $Lifetime_{95}$ or $Lifetime_{50}$, divided by the number of periods. The value of EC is computed according to @@ -741,14 +751,14 @@ approach. \subsection{Simulation Results} In order to assess and analyze the performance of our protocol we have -implemented PeCO protocol in OMNeT++~\citep{varga} simulator. The simulations -were run on a DELL laptop with an Intel Core~i3~2370~M (1.8~GHz) processor (2 -cores) whose MIPS (Million Instructions Per Second) rate is equal to 35330. To -be consistent with the use of a sensor node based on Atmels AVR ATmega103L -microcontroller (6~MHz) having a MIPS rate equal to 6, the original execution -time on the laptop is multiplied by 2944.2 $\left(\frac{35330}{2} \times -\frac{1}{6} \right)$. Energy consumption is calculated according to the power -consumption values, in milliWatt per second, given in Table~\ref{tab:EC}. +implemented the PeCO protocol in OMNeT++~\citep{varga} simulator. The +simulations were run on a DELL laptop with an Intel Core~i3~2370~M (1.8~GHz) +processor (2 cores) whose MIPS (Million Instructions Per Second) rate is equal +to 35330. To be consistent with the use of a sensor node based on Atmels AVR +ATmega103L microcontroller (6~MHz) having a MIPS rate equal to 6, the original +execution time on the laptop is multiplied by 2944.2 $\left(\frac{35330}{2} +\times \frac{1}{6} \right)$. Energy consumption is calculated according to the +power consumption values, in milliWatt per second, given in Table~\ref{tab:EC}, based on the energy model proposed in \citep{ChinhVu}. \begin{table}[h] @@ -780,7 +790,7 @@ consuming and more efficient, or implement a lightweight heuristic. For example, for a WSN of 200 sensor nodes, a leader node has to deal with constraints induced by about 12 sensor nodes. In that case, to solve the optimization problem a memory consumption of more than 1~MB can be observed with GLPK, -whereas less than 300~kB would be needed with CPLEX. +whereas less than 300~KB would be needed with CPLEX. Besides PeCO, three other protocols will be evaluated for comparison purposes. The first one, called DESK, is a fully distributed coverage algorithm @@ -789,17 +799,17 @@ GAF~\citep{xu2001geography}, consists in dividing the monitoring area into fixed squares. Then, during the decision phase, in each square, one sensor is chosen to remain active during the sensing phase. The last one, the DiLCO protocol~\citep{Idrees2}, is an improved version of a research work we presented -in~\citep{idrees2014coverage}. Let us notice that PeCO and DiLCO protocols are -based on the same framework. In particular, the choice for the simulations of a -partitioning in 16~subregions was made because it corresponds to the +in~\citep{idrees2014coverage}. Let us notice that the PeCO and DiLCO protocols +are based on the same framework. In particular, the choice for the simulations +of a partitioning in 16~subregions was made because it corresponds to the configuration producing the best results for DiLCO. Of course, this number of -subregions should be adapted according to the size of the area of interest and +subregions should be adapted according to the size of the area of interest and the number of sensors. The protocols are distinguished from one another by the formulation of the integer program providing the set of sensors which have to be -activated in each sensing phase. DiLCO protocol tries to satisfy the coverage of -a set of primary points, whereas PeCO protocol objective is to reach a desired -level of coverage for each sensor perimeter. In our experimentations, we chose a -level of coverage equal to one ($l=1$). +activated in each sensing phase. The DiLCO protocol tries to satisfy the +coverage of a set of primary points, whereas the objective of the PeCO protocol +is to reach a desired level of coverage for each sensor perimeter. In our +experimentations, we chose a level of coverage equal to one ($l=1$). \subsubsection{Coverage Ratio} @@ -807,9 +817,9 @@ Figure~\ref{figure5} shows the average coverage ratio for 200 deployed nodes obtained with the four protocols. DESK, GAF, and DiLCO provide a slightly better coverage ratio with respectively 99.99\%, 99.91\%, and 99.02\%, compared to the 98.76\% produced by PeCO for the first periods. This is due to the fact that at -the beginning DiLCO and PeCO protocols put to sleep status more redundant -sensors (which slightly decreases the coverage ratio), while the two other -protocols activate more sensor nodes. Later, when the number of periods is +the beginning the DiLCO and PeCO protocols put more redundant sensors to sleep +status (which slightly decreases the coverage ratio), while the two other +protocols activate more sensor nodes. Later, when the number of periods is beyond~70, it clearly appears that PeCO provides a better coverage ratio and keeps a coverage ratio greater than 50\% for longer periods (15 more compared to DiLCO, 40 more compared to DESK). The energy saved by PeCO in the early periods @@ -825,13 +835,13 @@ allows later a substantial increase of the coverage performance. \subsubsection{Active Sensors Ratio} -Having the less active sensor nodes in each period is essential to minimize the +Minimizing the number of active sensor nodes in each period is essential to minimize the energy consumption and thus to maximize the network lifetime. Figure~\ref{figure6} shows the average active nodes ratio for 200 deployed nodes. We observe that DESK and GAF have 30.36~\% and 34.96~\% active nodes for -the first fourteen rounds, and DiLCO and PeCO protocols compete perfectly with +the first fourteen rounds, and the DiLCO and PeCO protocols compete perfectly with only 17.92~\% and 20.16~\% active nodes during the same time interval. As the -number of periods increases, PeCO protocol has a lower number of active nodes in +number of periods increases, the PeCO protocol has a lower number of active nodes in comparison with the three other approaches and exhibits a slow decrease, while keeping a greater coverage ratio as shown in Figure \ref{figure5}. @@ -842,19 +852,37 @@ keeping a greater coverage ratio as shown in Figure \ref{figure5}. \label{figure6} \end{figure} +\subsubsection{\textcolor{blue}{Energy Saving Ratio (ESR)}} + +\textcolor{blue}{In this experiment, we consider an Energy Saving Ratio (see Figure~\ref{fig5}) for 200 deployed nodes. +The longer the ratio is, the more redundant sensor nodes are switched off, and consequently the longer the network may live. } + +\begin{figure}[h!] +%\centering +% \begin{multicols}{6} +\centering +\includegraphics[scale=0.5]{ESR.eps} %\\~ ~ ~(a) +\caption{Energy Saving Ratio for 200 deployed nodes} +\label{fig5} +\end{figure} + +\textcolor{blue}{The simulation results show that our protocol PeCO allows to efficiently save energy by turning off some sensors during the sensing phase. +As shown in Figure~\ref{fig5}, GAF provides better energy saving than PeCO for the first fifty rounds, because GAF balance the energy consumption among sensor nodes inside each small fixed grid that permits to extend the life of sensors in each grid fairly but in the same time turn on large number of sensors during sensing that lead later to quickly deplete sensor's batteries togehter. After that GAF provide less energy saving compared with other approches because of the large number of dead nodes. DESK algorithm shows less energy saving compared with other approaches due to activate a larg number of sensors during the sensing. DiLCO protocol provides less energy saving ratio commpared with PeCO because it generally activate a larger number of sensor nodes during sensing. Note that again as the number of rounds increases PeCO becomes the most performing one, since it consumes less energy compared with other approaches.} + + \subsubsection{Energy Consumption} The effect of the energy consumed by the WSN during the communication, computation, listening, active, and sleep status is studied for different network densities and the four approaches compared. Figures~\ref{figure7}(a) and (b) illustrate the energy consumption for different network sizes and for -$Lifetime95$ and $Lifetime50$. The results show that PeCO protocol is the most +$Lifetime_{95}$ and $Lifetime_{50}$. The results show that the PeCO protocol is the most competitive from the energy consumption point of view. As shown by both figures, PeCO consumes much less energy than the other methods. One might think that the resolution of the integer program is too costly in energy, but the results show that it is very beneficial to lose a bit of time in the selection of sensors to activate. Indeed the optimization program allows to reduce significantly the -number of active sensors and so the energy consumption while keeping a good +number of active sensors and also the energy consumption while keeping a good coverage level. Let us notice that the energy overhead when increasing network size is the lowest with PeCO. @@ -870,14 +898,14 @@ size is the lowest with PeCO. \subsubsection{Network Lifetime} -We observe the superiority of both PeCO and DiLCO protocols in comparison with +We observe the superiority of both the PeCO and DiLCO protocols in comparison with the two other approaches in prolonging the network lifetime. In -Figures~\ref{figure8}(a) and (b), $Lifetime95$ and $Lifetime50$ are shown for +Figures~\ref{figure8}(a) and (b), $Lifetime_{95}$ and $Lifetime_{50}$ are shown for different network sizes. As can be seen in these figures, the lifetime -increases with the size of the network, and it is clearly largest for DiLCO and +increases with the size of the network, and it is clearly larger for the DiLCO and PeCO protocols. For instance, for a network of 300~sensors and coverage ratio greater than 50\%, we can see on Figure~\ref{figure8}(b) that the lifetime is -about twice longer with PeCO compared to DESK protocol. The performance +about twice longer with PeCO compared to the DESK protocol. The performance difference is more obvious in Figure~\ref{figure8}(b) than in Figure~\ref{figure8}(a) because the gain induced by our protocols increases with time, and the lifetime with a coverage over 50\% is far longer than with 95\%. @@ -892,18 +920,18 @@ time, and the lifetime with a coverage over 50\% is far longer than with 95\%. \label{figure8} \end{figure} -Figure~\ref{figure9} compares the lifetime coverage of DiLCO and PeCO protocols +Figure~\ref{figure9} compares the lifetime coverage of the DiLCO and PeCO protocols for different coverage ratios. We denote by Protocol/50, Protocol/80, Protocol/85, Protocol/90, and Protocol/95 the amount of time during which the network can satisfy an area coverage greater than $50\%$, $80\%$, $85\%$, $90\%$, and $95\%$ respectively, where the term Protocol refers to DiLCO or -PeCO. Indeed there are applications that do not require a 100\% coverage of the -area to be monitored. PeCO might be an interesting method since it achieves a -good balance between a high level coverage ratio and network lifetime. PeCO +PeCO. \textcolor{blue}{Indeed there are applications that do not require a 100\% coverage of the +area to be monitored. For example, forest +fire application might require complete coverage +in summer seasons while only requires 80$\%$ of the area to be covered in rainy seasons \cite{li2011transforming}. As another example, birds habit study requires only 70$\%$-coverage at nighttime when the birds are sleeping while requires 100$\%$-coverage at daytime when the birds are active \cite{vu2009universal}. Mudflows monitoring applications may require part of the area to be covered in sunny days. Thus, to extend network lifetime, the coverage quality can be decreased if it is acceptable\cite{wang2014keeping}}. PeCO might be an interesting method since it achieves a good balance between a high level coverage ratio and network lifetime. PeCO always outperforms DiLCO for the three lower coverage ratios, moreover the -improvements grow with the network size. DiLCO is better for coverage ratios -near 100\%, but in that case PeCO is not ineffective for the smallest network -sizes. +improvements grow with the network size. \textcolor{blue}{DiLCO outperforms PeCO when the coverage ratio is required to be $>90\%$, but PeCo extends the network lifetime significantly when coverage ratio can be relaxed.} +%DiLCO is better for coverage ratios near 100\%, but in that case PeCO is not ineffective for the smallest network sizes. \begin{figure}[h!] \centering \includegraphics[scale=0.55]{figure9.eps} @@ -916,17 +944,17 @@ sizes. Table~\ref{my-labelx} shows network lifetime results for different values of $\alpha$ and $\beta$, and a network size equal to 200 sensor nodes. On the one -hand, the choice of $\beta \gg \alpha$ prevents the overcoverage, and so limit -the activation of a large number of sensors, but as $\alpha$ is low, some areas -may be poorly covered. This explains the results obtained for {\it Lifetime50} -with $\beta \gg \alpha$: a large number of periods with low coverage ratio. On -the other hand, when we choose $\alpha \gg \beta$, we favor the coverage even if -some areas may be overcovered, so high coverage ratio is reached, but a large -number of sensors are activated to achieve this goal. Therefore network -lifetime is reduced. The choice $\alpha=0.6$ and $\beta=0.4$ seems to achieve -the best compromise between lifetime and coverage ratio. That explains why we -have chosen this setting for the experiments presented in the previous -subsections. +hand, the choice of $\beta \gg \alpha$ prevents the overcoverage, and also +limits the activation of a large number of sensors, but as $\alpha$ is low, some +areas may be poorly covered. This explains the results obtained for +$Lifetime_{50}$ with $\beta \gg \alpha$: a large number of periods with low +coverage ratio. On the other hand, when we choose $\alpha \gg \beta$, we favor +the coverage even if some areas may be overcovered, so a high coverage ratio is +reached, but a large number of sensors are activated to achieve this goal. +Therefore the network lifetime is reduced. The choice $\alpha=0.6$ and +$\beta=0.4$ seems to achieve the best compromise between lifetime and coverage +ratio. That explains why we have chosen this setting for the experiments +presented in the previous subsections. %As can be seen in Table~\ref{my-labelx}, it is obvious and clear that when $\alpha$ decreased and $\beta$ increased by any step, the network lifetime for $Lifetime_{50}$ increased and the $Lifetime_{95}$ decreased. Therefore, selecting the values of $\alpha$ and $\beta$ depend on the application type used in the sensor nework. In PeCO protocol, $\alpha$ and $\beta$ are chosen based on the largest value of network lifetime for $Lifetime_{95}$. @@ -973,19 +1001,18 @@ lifetime, coverage ratio, active sensors ratio, and energy consumption. We plan to extend our framework so that the schedules are planned for multiple sensing periods. We also want to improve the integer program to take into account heterogeneous sensors from both energy and node characteristics point of -views. Finally, it would be interesting to implement PeCO protocol using a +views. Finally, it would be interesting to implement the PeCO protocol using a sensor-testbed to evaluate it in real world applications. - -\subsection*{Acknowledgements} +\subsection*{Acknowledgments} The authors are deeply grateful to the anonymous reviewers for their constructive advice, which improved the technical quality of the paper. As a -Ph.D. student, Ali Kadhum IDREES would like to gratefully acknowledge the +Ph.D. student, Ali Kadhum Idrees would like to gratefully acknowledge the University of Babylon - Iraq for financial support and Campus France for the received support. This work is also partially funded by the Labex ACTION program -(contract ANR-11-LABX-01-01). - +(contract ANR-11-LABX-01-01). + \bibliographystyle{gENO} -\bibliography{biblio} %articleeo +\bibliography{biblio} % biblio \end{document} diff --git a/PeCO-EO/reponse2.tex b/PeCO-EO/reponse2.tex index 137f819..7141bae 100644 --- a/PeCO-EO/reponse2.tex +++ b/PeCO-EO/reponse2.tex @@ -65,7 +65,7 @@ cooperate and make these decisions was not discussed.\\ \textcolor{red}{\textbf{\textsc{Reviewer's response:} I see at the end of page 8 the description of the INFO packet. However, you are not including any description of the position coordinates, remaining energy, sensor node ID, etc. in the write up. I suggest adding this into the write up to make the communication clear.}}\\ -\textcolor{green}{\textbf{\textsc{Answer:} Right, we have included more description about the INFO packet and the ActiveSleep packet into the write up at the end of page 8}}\\ +\textcolor{green}{\textbf{\textsc{Answer:} Right, we have included more description about the INFO packet and the ActiveSleep packet into the write up at the end of section~3.}}\\ \noindent {\bf 7.} The methodology is implemented in OMNeT++ (network simulator) and tested against 2 existing algorithms and a previously developed method by @@ -88,7 +88,7 @@ methodologies you have developed. Could you include some other measure that show PeCO is better? Maybe include computation time or something that is as convincing as the energy consumed per sensor.}} -\textcolor{green}{\textbf{\textsc{Answer:} In fact, we included a new performance metric that linked to the energy, called Energy Saving Ratio (ESR). We added new section in the result part related to this performance metric that shows our PeCO protocol provides better energy saving compared with other approaches.}}\\ +\textcolor{green}{\textbf{\textsc{Answer:} In fact, we defined in section 5.1 a new performance metric linked to the energy, called Energy Saving Ratio (ESR). We added a new section (5.2.3) in the result part related to this performance metric which shows that our PeCO protocol provides better energy saving compared with other approaches.}}\\