X-Git-Url: https://bilbo.iut-bm.univ-fcomte.fr/and/gitweb/ThesisAhmed.git/blobdiff_plain/bbcf0d29377de2a0fcd854331d65925b41aee6ba..1549041af87dc84f0de9b7815c7eeecc35c2df5a:/CHAPITRE_01.tex?ds=sidebyside

diff --git a/CHAPITRE_01.tex b/CHAPITRE_01.tex
index 92d38d9..8c68324 100644
--- a/CHAPITRE_01.tex
+++ b/CHAPITRE_01.tex
@@ -11,27 +11,38 @@
 
 \section{Introduction}
 \label{ch1:1}
-Almost of the software applications  are traditionally programmed as a sequential programs according to the Von Neumann report in 1993 \cite{ref50}. The structure of the 
-program code is understandable by the human brain as a series of instructions that execute one after the other. From many years until a short time, the users of the sequential applications are moving their thinking   towards that these applications must run faster with each new generation of microprocessors. This idea is no longer valid nowadays, because the recent release of the microprocessors have many computing units embedded in one chip and these programs are only run over one computing unit sequentially.
-Consequently, the traditional applications not have improved their performance a lot over the new architectures, whereas the new applications run faster over them in a parallel. The parallel application is executed over  all the available  computing  units at the same time to improve its performance. Furthermore, the concurrency revolution has been referred to the drastically improvement in the performance of the new applications side by side to  the new parallel architectures \cite{ref51}. Therefore, parallel applications and parallel architectures are closely tied together. It is hard to think about any of a parallel applications without thinking of the parallel hardware that executing them.
- 
-In this work, the iterative parallel applications, which is the most popular type of the parallel applications, are interested and running them over different parallel architectures to optimize their energy consumptions is the goal. 
-As a result, this chapter is aimed to give a brief overview for a parallel hardware architectures,  parallel iterative applications and the energy model from the other authors used to measure the energy consumption of these applications. 
-The reminder of this chapter is organized as follows: section \ref{ch1:2}  is  devoted 
-to describe the types of  parallelism and the types of the parallel platforms. It is also gives some information about the parallel programming models.  Section \ref{ch1:3} explains both the synchronous and asynchronous parallel iterative methods and comparing them. Section \ref{ch1:4}, presents the well accepted energy model from the state of the art that can be used to measure the energy consumption of the parallel iterative applications when changing the frequency of the processor. Finally,  section \ref{ch1:5} summaries this chapter.
+
+Referred to the state of the art, specifically Von Neumann report in 1993 \cite{ref50}, most of the software applications are structured as sequential programs.
+The structure of the program code is understandable by the human brain as a series of instructions that
+are executed successively one after the other. For many years until a short time,
+with each new generation of microprocessors,  users of  sequential applications have believed that these applications must run faster over them than previous ones.
+Nowadays, this idea is no longer valid  since  recent releases of  microprocessors have many computing units that are embedded in one chip and  programs are  running  only over one computing unit sequentially.
+Indeed, new applications have significantly improved  their performance over  new architectures in parallel compared to traditional applications.
+In this context,  the aim of improving the performance  of parallel applications is executed simultaneously over all available  computing units. 
+ Furthermore, the concurrency revolution has been referred to the drastic improvement in the performance of new applications side by side to  new parallel architectures \cite{ref51}. Therefore, parallel applications and parallel architectures are closely tied together. 
+Moreover, thinking about parallel applications is directly related to think about  parallel  hardware that  must support them. 
+For example, the energy consumption of one parallel system mainly depends on both: (1) parallel applications and (2) parallel architectures. Indeed, an energy consumption model or any measurement system depends on many specifications, some of them are related to the  parallel hardware features such as: (1) the frequency of  processor, (2) the  power consumption of processor and (3) the communication model.  Others are relied to  the parallel application such as: (1) the computation time and (2) the communication time of the application. 
+
+
+This work is focused on studying the iterative parallel  applications, where different parallel architectures
+are used to run them in parallel, which is considered as ultimate goal to optimize their energy consumptions.   
+
+In this context, this chapter gives a brief overview about parallel hardware architectures and  parallel iterative applications. Also, it discusses an energy model proposed by other authors used to measure the energy consumption of these applications. 
+The reminder of this chapter is organized as follows: section \ref{ch1:2} describes different types of  parallelism and different types of  parallel platforms. It also explains some models of parallel programming.  Section \ref{ch1:3} discusses both types of parallel iterative methods, synchronous and asynchronous one and comparing them. Section \ref{ch1:4}, presents a well accepted energy model from the state of the art that can be used to measure the energy consumption of parallel iterative applications when  the frequency of  processor is changed. Finally, section \ref{ch1:5} summarizes this chapter.
 
 
 \section{Parallel Computing  Architectures} 
 \label{ch1:2}
-The process of the simultaneous application of the calculations is called the parallel computing.
-It has main principle refer to the ability of dividing the large problem into smaller sub-problems that can be solved  at the same time \cite{ref2}. 
-Mainly, solving the sub-problems of the main problem in a parallel computing are carried out on multiple parallel processors.
-Indeed, the parallel processors architecture is a computer system composed from many processing elements connected via network model in addition to the software tools required to make the processing units work together \cite{ref1}.
-Consequently, parallel computing architecture consist of software and hardware resources. 
-The hardware resources are the processing units and the memory model in addition to the network system connecting them. The software resources include the specific operating system, the programming language and the compiler, or the runtime libraries. Furthermore, parallel computing can have different levels of parallelism, which can perform in software or hardware. There are five types of parallelism as follows:
+The process of executing the calculations simultaneously is called  parallel computing.
+Its main principle refers to the ability of dividing a large problem into a smaller sub-problems that can be solved at the same time \cite{ref2}. 
+Mainly, solving  sub-problems of one main problem in  parallel computing is carried out on multiple parallel processors.
+Indeed, parallel processor architecture can be defined as a computer system that is composed of many processing elements,
+which are connected via network model in addition to  software tools that are required to make the processing units work together  \cite{ref1}.
+In other words, the parallel computing architecture consists of a software and hardware resources. 
+Hardware resources are: (1) the processing units, (2) the memory model and (3) the network system that is used to connect them. Software resources include (1) the specific operating system, (2) the programming language and (3) the compile or the runtime libraries. Besides,  parallel computing may have different levels of parallelism that can be performed in a software or a hardware level. In this context, five types of parallelism levels have been defined as follows:
 \begin{itemize}
 
-\item \textbf{Bit-level parallelism (BLP)}: The appearance of very-large-scale integration (VLSI) in 1970s has been considered the first approach towards the parallel computing. It is used to increase the number of bits  in word size  being processed by a processor as in the figure~\ref{fig:ch1:1}. Year after year, the number of bits is increased starting from 4-bit microprocessors reaching until 64 bit microprocessors . For example, the recent  x86-64 architecture becomes the most familiar architecture nowadays. Therefore, the biggest word size is given more parallelism level and  thus less instructions to be executed by the processor at the same time.
+\item \textbf{Bit-level parallelism (BLP)}: The appearance of  very-large-scale integration (VLSI) in 1970s has been viewed as the first step towards  parallel computing. It is used to increase the number of bits  in the word size which is processed by a processor as illustrated in the figure~\ref{fig:ch1:1}. For many successive years, the number of bits have been increased starting from 4 bit to 64 bit microprocessors. For example nowadays, recent x86-64 architecture becomes the most familiar architecture. Noting that, the biggest word size is  the more parallelism level. Thus, it reflects to less instructions to be executed by a processor. 
  
 \begin{figure}[h!]
 \centering
@@ -40,7 +51,7 @@ The hardware resources are the processing units and the memory model in addition
 \label{fig:ch1:1}
 \end{figure}
 
-\item \textbf{Data-level parallelism (DLP)}:Data parallelism is the process of distributing the data vector between different parallel processors and each one performs the same operation on its data sub-vector. Therefore, many arithmetic operations can be performed on the same data vector in a simultaneous manner.  This type of parallelism can be used in many programs, especially from the area of scientific computing. Usually, data-parallel operations are only provided for arrays operations, see figure \ref{fig:ch1:2}. As an example about the applications  of this type of parallelism are the vectors multiplication, image and signal processing. 
+\item \textbf{Data-level parallelism (DLP)}: Data parallelism is the process of distributing  data vector between different parallel processors, where each one performs the same operations on its data sub-vector. Therefore, many arithmetic operations can be performed on the same data vector in a simultaneous manner. This type of parallelism can be used in many programs, especially in the area of scientific computing. Usually, data-parallel operations are only provided to arrays operations, for example, as shown in figure \ref{fig:ch1:2}.  Vector multiplication, image and signal processing can be considered as an example of applications that use this type of parallelism. 
 
 \begin{figure}[h!]
 \centering
@@ -49,9 +60,10 @@ The hardware resources are the processing units and the memory model in addition
 \label{fig:ch1:2}
 \end{figure}
 
-\item \textbf{Instruction-level parallelism (ILP)}: Generally, the sequential program composed of many instructions. These instructions can be executed in a parallel at the same time, if each of them is independent from the others. In particular, parallelism can be achieved in the instruction level by using  pipeline. It means all the independent instructions of the program are overlapped the execution of each  others. For example, if we have two instruction $I_1$ and $I_2$, they are independent if there is no control and data dependency between them.
- In pipeline stages, the execution of each instruction is divided into multiple steps that can be overlapped with the steps of other instructions by the pipeline hardware unit.
-Figure~\ref{fig:ch1:3} demonstrates four instructions each one has four steps denoted as  fetch, decode, execute and write which are implemented in a hardware units by pipeline. 
+
+\item \textbf{Instruction-level parallelism (ILP)}: Generally, a sequential program is composed of many instructions. These instructions can be executed in  parallel at the same time, if each of them is independent from  others. In particular, the parallelism can be achieved in  instruction level by using a pipeline. It means all independent instructions of a program are overlapped the execution of each others. For example, if we have two instructions: $I_1$ and $I_2$, they are independent if there is no control and no data dependency between them.
+In pipeline stages, the execution of each instruction is divided into multiple steps. Then, they can be overlapped with the steps of other instructions by a pipeline hardware unit.
+Figure~\ref{fig:ch1:3} demonstrates four instructions, where each one has four steps denoted as: (1) fetch, (2) decode, (3) execute and  (4) write. Thus, they are implemented in hardware units by pipeline. 
 
 \begin{figure}[h!]
 \centering
@@ -62,10 +74,11 @@ Figure~\ref{fig:ch1:3} demonstrates four instructions each one has four steps de
 
 
 
-\item \textbf{Thread-level parallelism (TLP)}: It is also known as a task-level parallelism.
-According to the Mooreâs law \cite{ref9}, the processor can have a number of transistors by a double 
-each two years to increase the frequency of the processor and thus its performance.  Beside that, cache and main memories sizes are must increased together to satisfy this increased. 
-This leads to some limits come from two main reasons, the first one is when the cache size is drastically increased leading to a larger access time. The second  is related to the big increase in the number of the transistors per CPU can be increased significantly the heat dissipation. As a result, the programmers sub divided their programs into multiple tasks which can be executed in parallel over distributed processors or shared multi-cores processors to improve the performance of the program, see figure~\ref{fig:ch1:4}. Each processor can have a multiple or individual thread dedicated for each task. A thread can be defined as a part of a parallel program which shares processor resources with other threads. 
+\item \textbf{Thread-level parallelism (TLP)}: It is also known as  task-level parallelism.
+According to  Mooreâs law \cite{ref9}, the processor can have a number of transistors
+that must doubled each two years to increase the frequency of processor, and consequently its improving 
+performance. Besides, cache and main memory sizes  must be increased together to response to this new change. 
+However, this provides some issues: (1) the first issue is related to drastically  increase in  cache size, which leads to a large access time. (2) the second issue is related to the huge increase in the number of the transistors per CPU, which  can increase significantly the heat dissipation. For that reasons,  programmers subdivided their programs into multiple tasks which can be then executed in parallel over distributed processors or shared multi-cores processors to improve the performance, see figure~\ref{fig:ch1:4}. Each processor can have individual threads or multiple threads dedicated to each task. A thread can be defined as a part of the parallel program that shares processor resources with other threads. 
 
 \begin{figure}[h!]
 \centering
@@ -74,31 +87,29 @@ This leads to some limits come from two main reasons, the first one is when the
 \label{fig:ch1:4}
 \end{figure}
 
-Therefore, we can consider the execution time of a sequential program composed of 
-$N$ tasks as the sum of the execution times of all tasks as follows:
+Therefore, the execution time of a sequential program that is composed of $N$ tasks, is the sum of the execution times of all tasks. Thus, it is expressed as  follows:
 
 \begin{equation}
 \label{ch1:eq1}
     Sequential~execution~time = \sum_{i=1}^{N} T_i
 \end{equation}
 
-Whereas, if the tasks are executed synchronously over multiple processing units in a parallel, the execution time of the program is the execution time of the task that has the maximum execution time (the slowest task) as follows:
+Whereas, if tasks are executed synchronously over multiple processing units in parallel, the execution time of the program is defined as the execution time of the task that has  maximum execution time (the slowest task) as follows:
 
- 
 \begin{equation}
 \label{ch1:eq2}
     Parallel~execution~time = \max_{i=1,\dots,N} T_i
 \end{equation}
 
-
 \item \textbf{Loop-level parallelism (LLP)}:
-The numerical algorithms and many other algorithms are executed iteratively the same program portion, the computations, using different forms of the loop statements allowed in the programming languages. At each iteration,  the program need to scan a large data structure such as an array structure to make the arithmetic calculations. Inside the loop structure, there are many instructions, which are independent or dependent. In a sequential loop execution the $i$ iteration must be executed after the completion of $(i-1)$ iteration. 
-While, if each iteration is independent from the others, then all the iterations are distributed over many  processors to be executed in a parallel,
-for example see figure\ref{fig:ch1:5}. Thus, this type of a loop is  called $parallel~loop$.
+The numerical algorithms and many other algorithms are executed iteratively the same program portion,  computations, using different forms of the loop statements that are allowed in the programming languages. At each iteration, the program needs to scan a large data structure such as  array structure to perform the arithmetic calculations. Inside the loop structure, there are many instructions that are  dependent or independent. In a sequential loop execution,  the $i$ iteration must be executed after the completion of 
+$(i-1)$ iteration. 
+Whereas, if each iteration is independent from  others, then  all  iterations' instructions are distributed over many  processors to be executed in  parallel 
+for example, see figure\ref{fig:ch1:5}. In the parallel programming languages, this type of loop is  called $parallel~loop$.
 
 \begin{figure}[h!]
 \centering
-\includegraphics[scale=0.8]{fig/ch1/loop-para.pdf}
+\includegraphics[scale=0.85]{fig/ch1/loop-para.pdf}
 \caption{Loop-level parallelism}
 \label{fig:ch1:5}
 \end{figure}
@@ -113,19 +124,20 @@ the execution time of a sequential loop portion has $N_{iter}$ iterations divide
                    {N_{processors}}
 \end{equation}
 
-For more detail about the levels of parallelism see \cite{ref3,ref4,ref6,ref7}.
+For more details about the levels of parallelism see \cite{ref3,ref4,ref6,ref7}.
 \end{itemize}
 
 \subsection{Types of Parallel platforms} 
 \label{ch1:2:1}
-The main goal behind using a parallel computers is to solve bigger problem faster.
-A collection of processing elements composing them must to work together to perform the final solution of the main problem. However, many different architectures have been proposed  
-and classified according to the parallelism in the instruction and data
-streams. In 1966, Michel Flynn has been proposed a simple model of categorizing all computers that still useful until know \cite{ref10}. His taxonomy considered the data and the operations performed on this data to produce four types of computer systems as follows:
+The main goal behind using parallel computer is to solve the bigger problem faster.
+A collection of processing elements must  work together to perform the final solution of the main problem. However, many different architectures have been proposed  
+and classified according to  parallelism in  instruction and data
+streams. In 1966, Michel Flynn has proposed a simple model to categorize all computers  models that still useful until now \cite{ref10}. His taxonomy is based on considering the data and the operations performed on this data to produce four types of computer systems as follows:
 
 \begin{itemize}
  
-\item \textbf{Single instruction, single data (SISD) stream}: A single processor executes a single instruction stream executing one data stream stored in an individual memory model, see figure \ref{fig:ch1:6}. As an example of this type is the  conventional sequential computer according to the Von Neumann model, it is also called the Uniprocessors.
+\item \textbf{Single instruction, single data (SISD) stream}: A single processor that executes a single instruction stream (i.e executing one data stream stored in an individual memory model, see figure \ref{fig:ch1:6}). 
+The conventional sequential computer, according to Von Neumann model, also called the Uniprocessors can de viewed as an example of this type.
 \begin{figure}[h!]
 \centering
 \includegraphics[scale=1]{fig/ch1/sisd.pdf}
@@ -133,11 +145,11 @@ streams. In 1966, Michel Flynn has been proposed a simple model of categorizing
 \label{fig:ch1:6}
 \end{figure}
  
-\item \textbf{Single instruction, multiple data (SIMD) stream}: All the processors execute the same instructions on different data. 
-Each processor stores the data in its local memory, the processor communicates with each others typically via simple communication model, see figure \ref{fig:ch1:7}. Many scientific and engineering
-applications are suitable to this type of parallel scheme.
-Vector and array processors are a well know  examples of this type. 
-As an example about the applications executed over this architecture are the graphics processing, video compression and medical image analysis applications.
+\item \textbf{Single instruction, multiple data (SIMD) stream}: All  processors execute the same instructions on different data. 
+Each processor stores the data in its local memory. Then, it communicates with each others typically via a simple communication model, see figure \ref{fig:ch1:7}. Many scientific and engineering
+applications are referred to this type of parallel scheme.
+Vector and array processors are well known  examples of this type. 
+Examples about the applications executed over this architecture: (1) graphics processing, (2) video compression and (3) medical image analysis applications.
 
 \begin{figure}[h!]
 \centering
@@ -146,7 +158,7 @@ As an example about the applications executed over this architecture are the gra
 \label{fig:ch1:7}
 \end{figure}
 
-\item \textbf{Multiple instruction, single data (MISD) stream}: Many operations from multiple processing elements are executed over the same data stream. Each processing element has its local memory to store the private multiple program instructions  applied  to unique global memory data stream as in figure \ref{fig:ch1:8}. While the MISD machine is not commonly used,  there are some interesting uses such as the systolic arrays and dataflow machines.
+\item \textbf{Multiple instruction, single data (MISD) stream}: Many operations from multiple processing elements are executed over the same data stream. Each processing element has its local memory to store the private program instructions. Then, these instructions are applied to unique global memory data stream as in figure \ref{fig:ch1:8}. While the MISD machine is not commonly used,  there are some interesting uses such as the systolic arrays and dataflow machines.
 
 \begin{figure}[h!]
 \centering
@@ -156,11 +168,10 @@ As an example about the applications executed over this architecture are the gra
 \end{figure}
 
 
-\item \textbf{Multiple instruction, Multiple data (MIMD) stream}: There are multiple processing elements each of which has a separate instruction  and data local memories.
-At any time, different processing elements may be executing different instructions on different data fragment, see figure \ref{fig:ch1:9}. There are two types of the MIMD machines: the share memory and massage passing MIMD machines. 
-In the share memory architectures, a processors are communicated via a share memory model, while in the message passing architecture each processor has its own local memory and all processors communicate via communication network model. The  multi-core processors, local
-clusters and grid systems are an examples for the MIMD machine.
-Many of applications have conducted over this architecture 
+\item \textbf{Multiple instruction, Multiple data (MIMD) stream}: There are multiple processing elements, each one has a separate instruction  and  local data memories.
+At any time, different processing elements may be used to execute different instructions on  different data fragment, see figure \ref{fig:ch1:9}. There are two types of MIMD machines: the shared memory and the message passing MIMD machines. 
+In the former, processors are communicated via a shared memory model, while in the latter, each processor has its own local memory and all processors communicate with each other via a communication network model. The  multi-core processors, local clusters and grid systems are  some examples for  MIMD machine.
+Many applications have been provided based on this architecture 
 such as computer-aided design, computer-aided manufacturing, simulation, modeling, iterative applications and so on.
 
  \begin{figure}[h!]
@@ -172,15 +183,14 @@ such as computer-aided design, computer-aided manufacturing, simulation, modelin
 \end{itemize}
  For more details about this architectural taxonomy see \cite{ref11,ref5,ref13,ref14}.
 
-The work of this thesis is dedicated to MIMD machines architecture. Therefore, we discuss in
+The work of this thesis is dedicated to MIMD machine's architecture. Therefore, we discuss in
 this chapter some of the commonly used parallel architectures that belong to MIMD machines.
-As explained before, the MIMD architectures can be classified into two types, the shared memory and the distributed message passing ones. Furthermore, these classifications are based on 
-how MIMD processors access the memory model. The shared MIMD machines communication topology can be bus-based, extended or hierarchical type. Whereas, the distributed memory MIMD machines may have hypercube or mesh inter connected networks. In the following are some well known MIMD parallel computing platforms:
+As explained before,  MIMD architectures can be classified into two types, the shared memory and the distributed message passing ones. Furthermore, these classifications are based on 
+how MIMD processors access the memory model. The shared MIMD machine communication topology can be bus-based, extended or hierarchical type. Whereas, the distributed memory MIMD machine may have hypercube or mesh interconnected networks. In the following  some well known MIMD parallel computing platforms are explained:
 
 \begin{itemize}
 \item \textbf{Multi-core processors}:
-The multi-core processor is a single chip component with two or more processing units.
-These processing units are called cores, which connected with each other via main memory model as in the figure \ref{fig:ch1:10}. Each individual core has its cache memory to store its data and execute different data or instructions stream in a parallel. Moreover, each core can have  one or more threads to execute a specific programming task as shown in the thread-level parallelism. Historically, the multi-cores of the CPU began as two-core processors, with the number of cores approximately doubling with each semiconductor process generation \cite{ref12}. The very quick improvements in the performance and thus the increase in the number of cores  is devoted in a graphical processing unit (GPU). A current exemplar of GPU  is the NVIDIA  GeForce TITAN Z with 5700 cores in 2015 \cite{ref17}. While the general-purpose microprocessors (CPU) has less number of the cores, for example the TILE-MX processor from Tilera   has 100 cores in the same year \cite{ref16}.
+The multi-core processor is a single chip component with two or more processing units. These processing units are called cores, which are connected to each other via a main memory model as in the figure \ref{fig:ch1:10}. Each individual core has its cache memory to store its data to execute different data or instruction streams in parallel. Moreover, each core may have  one or more threads to execute a specific programming task as shown in the thread-level parallelism. Historically, the multi-cores of the CPU began as a two-core processors, with an increase in the number of cores approximately by double with each semiconductor process generation \cite{ref12}. The very quick improvements in the performance and  the increase in the number of cores  are devoted in the graphics processing unit (GPU). A current exemplar of the GPU  is the NVIDIA  GeForce TITAN Z with 5700 cores in the year of 2015 \cite{ref17}. While, in the same year the general-purpose microprocessor (CPU) has been appeared with less number of the cores, for example the TILE-MX processor from Tilera has 100 cores  \cite{ref16}.
 For more details about the multi-core processors see \cite{ref15}.
 
 \begin{figure}[h!]
@@ -192,9 +202,9 @@ For more details about the multi-core processors see \cite{ref15}.
 
 
 \item \textbf{Local Cluster}:
- is generally collection of independent  computers that are connected
+ is a collection of independent  computers that are connected
 to each other  via standard network switches and cables, which is a high speed  
-local area networks (LAN) with low latency and big bandwidth. Moreover, each node is distributed from each other and it is communicated with other nodes  using distributed massage passing model. All the nodes in the cluster must be controlled by one node called the master node, which is a specific node handles the scheduling and management of the other nodes as shown in the figure \ref{fig:ch1:11}. Usually, the hardware specifications of all nodes are homogeneous in term of the computing power and memory and it is also called tightly-coupled fashion. Also, each computing node in the cluster has the same copy of the operating system. See \cite{ref18, ref19} for more information about the cluster and its applications.
+local area network (LAN) with low latency and big bandwidth. Moreover, each node is distributed from each other and communicates with other nodes  using distributed message passing model. All the nodes in the cluster must be controlled by one node called the master node, which is a specific node used to handle the scheduling and the management of the other nodes as shown in the figure \ref{fig:ch1:11}. Usually, the hardware specifications of all nodes are homogeneous in term of  computing power and memory. Thus, it is called tightly-coupled fashion. Also, each computing node in the cluster has the same copy of the operating system. See \cite{ref18, ref19} for more information about the cluster and its applications.
 
 \begin{figure}[h!]
 \centering
@@ -205,8 +215,8 @@ local area networks (LAN) with low latency and big bandwidth. Moreover, each nod
 
 
 \item \textbf{Grid (Distributed clusters)}:
-Grid is a collection of local computing clusters from different sites connected via wide area network (WAN), which can be appeared virtually to the benefit users as a complete computing system  \cite{ref20}. 
-In particular, different local clusters composing the grid are geographically far away from each others. Usually, each local cluster composed from homogeneous nodes, which are different from the nodes of the others cluster located in different sites. These nodes can be different in the hardware and software  specifications such as the computing power, memory, operating system, local network latency and bandwidth. Figure \ref{fig:ch1:12} presents an example of the grid composed from three heterogeneous local clusters located in a different sites which are connected throw wide area network.  Furthermore, the grid can be referred to an infrastructure  applies the integration and the collaboration by using a collection  of different computers, networks, databases servers , and scientific devices belong to  many companies and universities. Therefore, wide heterogeneous computing resources are allowed to many users simultaneously. While the only bottleneck of the grid is the high latency communications between the nodes from different sites. The grid is also called the loosely-coupled fashion platform. However, the fault tolerance  is required to guarantee the process of sending and receiving  the messages between the computing nodes and thus keeps all the messages    from the lost.
+Grid is a collection of local computing clusters from different sites that are connected via a wide area network (WAN), which can be appeared virtually to the benefit of users  to form a complete computing system  \cite{ref20}. 
+In particular, different local clusters compose the grid are geographically located far away from each others. Usually, each local cluster is composed of homogeneous nodes, which are different from  nodes of the other clusters located in different sites. These nodes can be different in its hardware and software specifications (i.e its computing power, its memory size, its operating system and its local network latency and bandwidth. Figure \ref{fig:ch1:12} presents an example of a grid that is composed of three heterogeneous local clusters that are located in  different sites and  connected via a wide area network.  Furthermore, the grid can be referred to an infrastructure  that applies the integration and the collaboration by using  a collection  of different computers, networks, database servers  and scientific devices, which are belong to  many companies and universities. Therefore, wide heterogeneous computing resources are available to be used simultaneously by different user. Let's indicates that, the only bottleneck of the grid is the high latency communications between the nodes from different sites. The grid is also called the loosely-coupled fashion platform. However, the fault tolerance  is required to guarantee the process of sending and receiving  of messages between the computing nodes. Thus, it safely protects  all  messages against loss.
 
 \begin{figure}[h!]
 \centering
@@ -225,27 +235,27 @@ In particular, different local clusters composing the grid are geographically fa
 \end{itemize}
 
 
-Grid'5000 \cite{ref21} can be considered as a good example for this distributed platform. 
+Grid'5000 \cite{ref21} can be considered as a good example of this distributed platform. 
 It is a large-scale testbed that consists of ten sites distributed
-all over metropolitan France and Luxembourg. These sites are: Grenoble, Lille, Luxembourg, Lyon, Nancy, Reims, Rennes , Sophia, Toulouse, Bordeaux. Figure \ref{fig:ch1:13} shows the geographical distribution of grid'5000 sites over France and Luxembourg. All the sites are connected together via a  special long distance network called RENATER, which is the French
+all over metropolitan France and Luxembourg. These sites are: Grenoble, Lille, Luxembourg, Lyon, Nancy, Reims, Rennes , Sophia, Toulouse, Bordeaux. Figure \ref{fig:ch1:13} shows the geographical distribution of grid'5000 sites over France and Luxembourg. All the sites are connected together via a  special long distance network called RENATER, which is abbreviation of the French
 National Telecommunication Network for Technology. Each site in the grid is
 composed of a few heterogeneous computing clusters and each cluster contains
 many homogeneous nodes. In total, Grid'5000 has about one thousand heterogeneous nodes and eight thousand cores. In each site, the clusters and their nodes
 are connected via high speed local area networks. Two types of local networks
 are used, Ethernet or Infiniband networks, which have different characteristics
 in terms of bandwidth and latency.
-Grid'5000 is dedicated as a test-bed for grid computing and thus users can book the required nodes from different sites. It  allows the user to deploy his configured image of the operating system over the reserved nodes. Therefore, many software tools are available to the user to control and manage the reservation and deployment processes from his local machine. For example, OAR \cite{ref22} is a  batch scheduler used to manage the heterogeneous resources of the grid'5000.
-
+Grid'5000 is dedicated as a test-bed for grid computing and thus users can book the required nodes from different sites. 
+It also gives the opportunity to the users to deploy their configured image of the operating system over the reserved nodes.
+Indeed, many software tools are available for  users in order to control and manage the reservation and deployment processes from their local machines. For example, OAR \cite{ref22} is a  batch scheduler that is used to manage the heterogeneous resources of the grid'5000.
 
 
 \subsection{Parallel programming Models} 
-\label{ch1:2:2}.
-There are many parallel programming languages and libraries have been developed 
+\label{ch1:2:2}
+There are many parallel programming languages and libraries that have been developed 
 to explore the computing power of the parallel architectures. In this section,
-the parallel computing programming languages are divided into two main types, 
-which is the shared and the distributed models. Moreover, these two types are divided  into two subcategories according to the support level to the number of computing units composing them.
+two types of parallel programming languages are investigated: (1) shared and (2) distributed programming models. Moreover, each  type is divided  into two subcategories according to their supporting level for the number of computing units from which  the parallel platform is composed.
 Figure \ref{fig:ch1:14} presents this classification hierarchy of the parallel programming 
-paradigm. It is also show three parallel languages examples for each sub-category.
+models. Three parallel language examples for each subcategory are shown.
 
 
 \begin{figure}[h!]
@@ -257,149 +267,153 @@ paradigm. It is also show three parallel languages examples for each sub-categor
 
 
 Many programming interfaces and libraries have been developed to compile and run the 
-parallel applications over the parallel architectures. In the following are 
-some examples for each type of the parallel programming models:
+parallel applications over the parallel architectures. In the following, 
+some examples for each type of the parallel programming models are discussed:
 
 \begin{itemize}
 \item \textbf{Local cluster programming models}
   \begin{itemize}
-    \item \textbf{MPI} \cite{ref23} is the Message Passing Interface, is a standardization 
-                      dedicated for message passing in distributed memory environment.
-                      The first version of MPI designated by a group of researchers in
-                      1991. It is a library,  not a language and its subroutines 
+    \item \textbf{MPI} \cite{ref23} is the Message Passing Interface and it id considered as a 
+                      standardization 
+                      dedicated to message passing in a distributed memory environment.
+                      The first version of MPI was designed by a group of researchers in
+                      1991. It consist of a library,  not a language and its subroutines 
                       can be called from many programming languages such as C, Fortran and 
-                      Java. The programmes that users write in these languages are 
-                      compiled with ordinary compilers and linked with the MPI library.  
-                      Its library functions are not only for peer to peer operations throw 
-                      send and receive messages, but it allowed many others collective 
-                      operations such as gathering and reduction operations. MPI user feel
-                      free form the network topology, synchronization, and communication
-                      functionality between  group of processes. Furthermore, it has 
+                      Java. Programmes that write in these languages and 
+                      compile their codes with ordinary compilers are directly  linked to MPI library.  
+                      library functions are not only limited to  peer to peer operations for 
+                      sending and receiving messages, also it is related to many others collective 
+                      operations such as gathering and reduction operations. MPI user, feels
+                      free from the network topology, synchronization and communication
+                      functionality between a group of processes. Furthermore, it has an
                       asynchronous point to point operations, which make the computations 
-                      to overlap with communications. While MPI is not devoted to a grid,
+                      to overlap with communications. While MPI is not devoted to grid,
                        \textbf{MPICH}  is one of the most 
-                      popular implementations of MPI dedicated for grid computing. It is used               
-                      as an extended version for MPI, which implements a fault tolerance  
-                      \cite{ref52}. In this work, both of MPI and MPICH programming libraries 
-                      are used for programming our algorithms and applications which called 
+                      popular implementations of MPI dedicated for grid computing. It has been used
+                      as an extended version of MPI, which has been implemented for fault tolerance  
+                      \cite{ref52}. In this work, both  MPI and MPICH programming libraries 
+                      are used in programming of our algorithms and applications which are included
                       inside both Fortran and C programming languages.  
                       
-   \item \textbf{PVM} \cite{ref25} is for Parallel Virtual Machine,  which is a collection 
-                      of software tools and libraries to allows users working over a   
-                      heterogeneous set of machines to operate as a single high performance 
-                      parallel platform. It is dedicated for a group of machine that are 
-                      distributed and heterogeneous in the operating system environments. 
-                      The PVM system is elementarily for parallel programming to be used with 
-                      C, C++, and Fortran  languages. 
-                      It is considered more robust in fault tolerance 
-                      than MPI, easier to add or delete the crashed nodes in the host pool 
-                      \cite{ref26}. While MPI has more communication messages support and asynchronous 
+   \item \textbf{PVM} \cite{ref25} is included Parallel Virtual Machine,  composed of a collection 
+                      of software tools and libraries that allow users to work over a   
+                      heterogeneous set of machines to perform a single high performance 
+                      parallel platform. It is dedicated to a group of machines that are 
+                      distributed  heterogeneously the operating system environments. 
+                      The PVM system is elementary for parallel programming to be used with 
+                       C, C++, and Fortran  languages. 
+                      It supports more robustness in term of fault tolerance tan MPI. 
+                      Also, it is not complicated in term of adding or deleting the crashed
+                      nodes in the host pool  \cite{ref26}.
+                      On the other side, MPI supports more more communication messages and asynchronous 
                       operations which are not allowed in PVM. 
+                       
                       
                       
    \item \textbf{BLACS} \cite{ref27} is for Basic Linear Algebra Communication Subprograms.                 
-                 It has a collection of libraries that used to built linear algebra messages 
-                 communication model which is applied effectively over distributed memory architectures.
-                 The primary goal of using 
-                 BLACS is mapping a liner set or processors or any distributed machines into
-                 a two dimensional array or grid, which is offer an easy tool for building a
-                 linear algebra applications. 
+                 It consist of  a collection of libraries that are used to build a linear algebra message 
+                 communication model. Thus, it is effectively applied  over distributed memory architectures.
+                 The primary goal of using BLACS is mapping a linear set or processors or any distributed 
+                 machines into two dimensional arrays or grid. Indeed, it offers an easy tool to build the
+                 linear algebra based applications. 
                  
   \end{itemize} 
   
 \item \textbf{Grid programming models}
   \begin{itemize}
-   \item \textbf{Gridsolve} \cite{ref28}  is the first middleware for grid  and 
-                high performance computing that offers a good tool to solve a complex
-                scientific applications using distinct distributed machines. It applied the
-                fault tolerance and load balancing features to ensure the reliability of the
+   \item \textbf{Gridsolve} \cite{ref28}  is the first middleware for  grid  and the
+                high performance computing. It  supports  a good tool to solve complex
+                scientific applications using distinct distributed machines. Also, it satisfies the
+                fault tolerance and achieves the load balancing features to ensure the reliability of the
                 applications  when running over a geographically distributed resources. 
-                It works with different programming languages such as C,C++, Java and Fortran. 
+                It can be integrated with different programming languages such as C, C++, Java and Fortran. 
                 
-   \item \textbf{GLOBAS} \cite{ref29,ref30} is the most widely standardization tool kit
+   \item \textbf{GLOBAS} \cite{ref29,ref30} is the most widely standardization toolkit
                 for grid computing. It permits the users to share their computing resources securely. 
-                While the GLOBAS toolkit is allowed to work with grid, it offers a fault 
-                detection mechanism to ensure the delivery of the messages. 
-                The first version of Globus toolkit appeared
-                in 1998 and now the sixth version is available \cite{ref31}. 
+               Since, the GLOBAS toolkit has the opportunity to work with grid, then it offers a fault 
+                detection mechanism to ensure the delivery of  messages. 
+                The first version of Globus toolkit has been appeared
+                in 1998. Recently, the sixth version of this toolkit is available now \cite{ref31}. 
                        
 
-  \item \textbf{Legion} \cite{ref32,ref33} is an object-based and meta-systems software project
-                at the University of Virginia on November 1997. 
-                It implements many features such as security, portability and fault tolerance.
-                Moreover, it is created to support a wide degree of parallelism throw an easy 
-                programming tools to built the parallel applications.
+  \item \textbf{Legion} \cite{ref32,ref33} is an object-based, meta-systems software project,
+                invented by the University of Virginia on November 1997. 
+                It ensures many features such as security, portability and fault tolerance.
+                Moreover, it has been created to support a wide degree of parallelism under the use of  
+                an easy programming tool to build  parallel applications.
               
         
   \end{itemize}
  
 \item \textbf{Multi-core CPU programming models} 
   \begin{itemize}
-   \item \textbf{OpenMP}  \cite{ref34} is parallel programming tool for shared memory 
+   \item \textbf{OpenMP}  \cite{ref34} is a  parallel programming tool dedicated to shared memory 
                 architectures. The main goal of using this programming model is to provide 
-                a standard and portable API (application programming interface) for writing 
-                shared memory parallel programs. It can be used with programming languages such 
-                as C, C++ and Fortran to support different types of shared memory platforms 
+                a standard and portable API (application programming interface) to  write
+                shared memory parallel programs. It can be used with many  programming languages such 
+                as C, C++ and Fortran in order to support different types of shared memory platforms 
                 such as multi-core processors.
-                OpenMP implements multi-threading, which is a method of parallel programming 
-                that organized by using master thread to control a set of slave threads. Each
-                thread can be executed in parallel by allocating it to a processor.  
-                Moreover, OpenMP can be  used with MPI to support hybrid platforms that have 
-                shared and distributed memory models in the same time.
+                OpenMP uses multi-threading, which is a method of parallel programming 
+                that uses a master thread to control a set of slave threads. Each
+                thread can be executed in parallel by allocating it to one processor.  
+                Moreover, OpenMP can be  used with MPI to support hybrid platforms which have 
+                shared and distributed memory models at the same time.
                 
   \item \textbf{Cilk} \cite{ref13,ref35} is a linguistic and runtime technology for algorithmic 
-                multi-threaded programming originally developed at MIT. 
-                It is allowed the programmer to focus on building the program in a structural way 
-                to discover the inherent parallelism. Many specification are used in Cilk 
-                such as the load balancing, synchronization and communication protocols. 
+                multi-threaded programming originally developed by MIT. 
+                It allows the programmer to focus on building the program in a structured way 
+                in order to discover the inherent parallelism. Many specifications are used in Cilk 
+                such as  load balancing, synchronization and communication protocols. 
                 
                 
                 
             
                 
-   \item \textbf{TBB} \cite{ref36} is for Threading Building Blocks, is a software library used with 
-                C++ programming language for multi-core parallel programming developed by Intel.
-                It woks on the principle of dividing the computations into many tasks that can be 
-                executed in  
-                parallel. It also has a management library to schedule the parallel task execution. 
-                The difference between OpenMP and TBB, is the latter uses a task-based scheduling 
-                mechanism. Furthermore, TBB is more popular with C++ programming language than 
-                others languages. It is designed to work with any compiler environments, and thus 
-                it easily ported to a new platform. Consequently, TBB has been ported to a 
-                different types of operating systems and processors. While, it has limited
-                support to vector processing architecture and then it connected with OpenMP  
-                and Cilk to support this  platform.
+   \item \textbf{TBB} \cite{ref36} Abbreviation of Threading Building Blocks. It is a software library 
+                used with 
+                C++ programming language for multi-core parallel programming that has been developed by Intel.
+                It works on the principle of dividing the computations into many tasks and
+                executing them in parallel. 
+                Also, It  has a management library to schedule the parallel task execution. 
+                The only difference between OpenMP and TBB, is that TBB uses a task-based scheduling 
+                mechanism. For that reason, TBB is more popular with C++ programming language than 
+                other languages. Additionally, it has the ability to work with any compiler environments.
+                Hence, it can be easily supported by any new platform. Therefore, TBB has been supported by 
+                different types of operating systems and processors. 
+                Noting that, it is still has some limitations to support vector processing architecture. 
+                For this reason, it is connected with with OpenMP and Cilk to overcome this limitations.
+               
   \end{itemize}
   
   
   
 \item \textbf{GPU programming models} 
   \begin{itemize}
-   \item \textbf{CUDA} \cite{ref37} Modern graphical processing units (GPUs) have been increasing  chip-level  
-                       parallelism.  Current  NVIDIA  GPUs  are  many-core processor having thousands
-                       of core.  According to this massively cores parallelism, the NVIDIA in 2007 developed
-                       a parallel programming  language called CUDA , which is for Compute Unified Device  
-                       Architecture.  A CUDA program has two parts, the first one is called a host which is a
-                       set of threads that executed sequentially over the CPU. The second part is called the
-                       kernels, which are a set of a threads that can be executed in a parallel over the GPU.
+   \item \textbf{CUDA} \cite{ref37} Modern graphical processing units (GPUs) have increased its chip-level  
+                       parallelism.  Current  NVIDIA  GPUs  consisted of many-cores processor that have 
+                       thousands of cores. According to this massively core parallelism, in 2007 the NVIDIA 
+                       has  developed CUDA as parallel programming  language, which is Compute Unified Device  
+                       Architecture.  A CUDA program has two parts: hosts and kernels.  The host  is a
+                       set of threads that are sequentially executed  over the CPU. 
+                       While, the kernel is a set of threads that can be executed in parallel over the GPUs.
  
    \item \textbf{OpenCL}\cite{ref38} is for Open Computing Language. It is a parallel 
                        programming language dedicated for heterogeneous platform composed 
-                       of CPUs and GPUs. The first release is initially developed by Apple  
-                       in 2008. Functions executed on an OpenCL device is called kernel, 
-                       which can be portably executes on any computing hardware such as CPU or GPU cores. 
-                       This parallel programming language can support the homogeneous shared memory 
-                       platforms and the multi-core processors, by using one core for control 
+                       of CPUs and GPUs. The first release of this language has initially developed by Apple  
+                       in 2008. Functions that are executed over OpenCL devices are called kernels, 
+                       which can be portable execute on any computing hardware such as CPU or GPU cores. 
+                       This parallel programming language supports the homogeneous shared memory 
+                       platforms and the multi-core processors by using one core for control 
                        and the others for computing.
                          
-   \item \textbf{HLSL} \cite{ref39} is for High Level Shading Language, is the shader 
+   \item \textbf{HLSL} \cite{ref39} is named as the  High Level Shading Language and defined as the shader 
                        programming language for Direct3D, which is a part of
-                       Microsoftâs DirectX API. It supports the shader construction with 
-                       C-like syntax, types, expressions, statements, and functions. It 
+                       Microsoftâs DirectX API. It supports the shader design with 
+                       C language syntax, types, expressions, statements, and functions and it 
                        provides a graphical pipeline parallelism.
-                       The last version of HLSL is v5.0 for DirectX 11, which adds a new general-purpose GPU
-                       functions like CUDA. Recently, the new OpenCL version starts to replace CUDA 
-                       as a multi-platform GPU language.
+                       The last version of HLSL is the version 5.0 of DirectX 11, which has added a new 
+                       general-purpose GPU functions like CUDA. Recently, the new OpenCL 
+                       version has started to replace CUDA as a multi-platform GPU language.
                                    
   \end{itemize}
  
@@ -408,8 +422,8 @@ some examples for each type of the parallel programming models:
 
 \section{Iterative Methods} 
 \label{ch1:3}
-Numerical methods are a scientific computations for solving linear and non-linear problems.
-Almost of the numerical problems can be represented by mathematical equation form with relations between its components. For example, solving linear equations which is well known in the scientific  area is generally expressed in the following form:
+Numerical methods are defined as a scientific computation methods to solve linear and non-linear problems.
+Most of the numerical problems can be represented by a mathematical equation form with relations between its components. For example, solving linear equations which are well known in the scientific  area is generally expressed in the following form:
 
 \begin{equation}
   \label{eq:linear}
@@ -417,14 +431,14 @@ Almost of the numerical problems can be represented by mathematical equation for
 \end{equation}
 
 Where $A$ is a two dimensional matrix of size $N \times N$, $x$ is the unknown vector,
-and $b$ is a vector of constant, each of size $N$ . There are two types of solution methods for solving this linear system.
-The first method is called \textbf{Direct methods}, which is a finite number of steps depending on the 
-size  of the linear system to give the exact solution. If the problem size is very big this methods are expensive or their
-solutions are impossible in some cases.  The second type is called \textbf{Iterative methods}, which is computed 
-many times the same block of the operations starting from the initial vector until reaching to the acceptable 
+and $b$ is a vector of constant, each of size $N$. There are two types of solution methods to solve this linear system.
+The first method is called \textbf{Direct methods}, which consist of a finite number of steps depending on the 
+size  of the linear system to give the exact solution. If the problem size is very big, these methods are expensive or their
+solutions are impossible in some cases.  The second type is called \textbf{Iterative methods}, which computes 
+the same block of  operations  several times, starting from the initial vector until reaching  the acceptable 
 approximation  of the exact solution. However, the iterative methods are faster than direct methods and can be 
-applied in parallel. Moreover, iterative methods can be used to solve both of the linear and non-linear equations.
-In our work, we are interested in parallelizing the iterative methods because they are more popular and effective than  direct ones.
+effectively applied in parallel. Moreover, iterative methods can be used to solve both  linear and non-linear equations.
+In our work, we are interested to paralleize the iterative methods because they are more popular and more efficient than  direct ones.
 
 The sequential iterative algorithm is typically organized as a series of steps essentially  of the form:
 
@@ -433,7 +447,7 @@ The sequential iterative algorithm is typically organized as a series of steps e
    X^{(k+1)} \longleftarrow F(X^k) 
 \end{equation}
 
-Where $F$ is one or set of operations applied to the data vector $X^k$ to produce the new data vector $X^{(k+1)}$. This operation $F$ is applied sequentially many times until convergence condition is satisfy as in the   algorithm \ref{sia}.
+Where $F$ is one or set of operations applied to the data vector $X^k$ to produce the new data vector $X^{(k+1)}$. The operation $F$ is applied sequentially many times until satisfying the convergence condition as in the   algorithm \ref{sia}.
 
 
 
@@ -451,18 +465,18 @@ Where $F$ is one or set of operations applied to the data vector $X^k$ to produc
    
 \end{algorithm}
 
-The sequential iterative algorithm at each iteration computes the value of the relative error, which is called the residual that denoted as $R$. This error value is the maximum difference  between the  data components of vectors of the last two successive iterations as follows:
+The sequential iterative algorithm at each iteration computes the value of the relative error, which is called the residual and denoted as $R$. This error value is the maximum difference  between the  data components of the vectors of the last two successive iterations as follows:
 
  \begin{equation}
   \label{eq:res}
    R = \max_{i=1, \dots, N}  \abs{X_i^{(k+1)} - X_i^k}
 \end{equation}  
-Where $N$ is the size of the vector $X$. Then, the iterative sequential algorithm stops its iterations if the maximum error between the last two successive solutions vectors, as in \ref{eq:res}, is less than or equal to the some threshold value. Otherwise, it replaces the new vector $X^{(k+1)}$ with the old vector $X^k$ and computes the new iteration.
+Where $N$ is the size of the vector $X$. Then, the iterative sequential algorithm stops its iterations if the maximum error between the last two successive solution vectors, as in \ref{eq:res}, is less than or equal to  some threshold values. Otherwise, it replaces the new vector $X^{(k+1)}$ with the old vector $X^k$ and computes the new iteration.
 
 \subsection{Synchronous Parallel Iterative method} 
 \label{ch1:3:1}
 The sequential iterative algorithm \ref{sia}, can be parallelized by executing it on many computing units. To solve this algorithm on $M$ computing units, first the elements of the problem vector $X$ must be subdivided into $M$ sub-vectors, $X^k=(X_1^k,\dots,X_M^k)$. 
-Each sub-vector can be solved  independently one computing units as follows:
+Each sub-vector can be solved  independently on one computing unit as follows:
 
 \begin{equation}
   \label{eq:subvector}
@@ -488,18 +502,15 @@ Where $X_i^k$ is the sub-vector executed over the $i^{th}$ computing unit at the
 \end{algorithm}
 
 
-
-
-
-The algorithm \ref{spia}, represents the synchronous parallel iterative algorithm. In contrast to 
-sequential iterative algorithm, algorithm \ref{spia}, stops its iterations when the convergence condition  is satisfied. It computes the residual value $R$ as follows: 
+The algorithm \ref{spia}, represents the synchronous parallel iterative algorithm. Similarly to 
+the sequential iterative algorithm \ref{spia}, this algorithm stops its iterations when the convergence condition  is satisfied and it computes the residual value $R$ as follows: 
 
 \begin{equation}
  \label{eq:res_syn}
    R = \max_{i=1, \dots, M}  (\max_{j=1, \dots, m}\abs{X_{ij}^{(k+1)} - X_{ij}^k})
 \end{equation}
-This algorithm need to satisfy some convergence condition which  is called the  global convergence condition. In order to detect the global convergence overall computing units, first we need to compute
-at each iteration the local residual and store it in the local variable at the computing unit $i$. Then at the end of each iteration, all the local residuals  from $M$ computing units must be reduce to one maximum  value represented by the  global residual, which is represent the global maximum errors overall maximum local errors from $M$ computing units. Where $m$ is the size of the $i$  sub-vector.
+This algorithm needs to satisfy some convergence condition which  is called the  global convergence condition. In order to detect the global convergence overall computing units, first we need to compute
+at each iteration the local residual and store it in the local variable at the computing unit $i$. Then at the end of each iteration, all the local residuals  from $M$ computing units must be reduced to one maximum  value represented by the  global residual, which represents the global maximum errors overall maximum local errors from $M$ computing units. Where $m$ is the size of the $i$  sub-vector.
 For example, in MPI this operation is directly applied using a high level communication procedure  called \textit{AllReduce}. The goal of this communication procedure is to apply the reduction operation on all local variables computed by the computing units.
 
 
@@ -511,10 +522,12 @@ For example, in MPI this operation is directly applied using a high level commun
 \end{figure}
 
 
-In synchronous iterative algorithm, computing processors needs to communicate with each other to 
-exchange data at each iteration. Algorithm \ref{spia} can be used synchronous iterations and synchronous communications and denoted as \textbf{SISC} model.  At each iteration, the computing processor waits until 
-it has receive all the data computed at the previous iteration from the other processors to perform the next iteration. This type of communication model used if there are a dependencies between the parallel tasks. Figure \ref{fig:ch1:15}, shows that using SICS model in a heterogeneous platform may results in a big periods  of the idle times represented by the white dashed spaces between two successive iterations. Indeed, this happens when the fast computing processor waits for the slow ones to finish their iterations to be able to synchronously send its data to them. This operation is wasted a big amount of the computing power of the faster processors and thus their energy consumptions. The increased in the level of the heterogeneity between the computing powers of the computing processors may increased propositionally these idle times.
-For this reason, this algorithm is effectively implemented over a local cluster where a high speed local network is exist to reduce these idle times.  
+In the synchronous iterative algorithm, computing processors need to communicate with each others to 
+exchange data at each iteration. Algorithm \ref{spia} can used synchronous iterations and synchronous communications  denoted as \textbf{SISC} model.  At each iteration, the computing processor waits until 
+it  receives all the  computed data at the previous iteration from other processors to perform the next iteration. This type of communication model uses if there is a dependency between the parallel tasks. Figure \ref{fig:ch1:15}, shows that using SICS model in a heterogeneous platform may result in a big period  of the idle times represented by the white dashed spaces between two successive iterations. Indeed, this happens when the faster computing processor waits for the slower ones to finish their iterations to be able to synchronously send its data to them. 
+Using this operation, faster processors wast a big amount of their computing power and thus their energy consumption.
+The increase in the heterogeneity level between  computing powers of the computing processors may increase propositionally these idle times.
+Accordingly, this algorithm is effectively implemented over a local cluster, where a high speed local network is used to reduce these idle times.  
 
 
 \begin{figure}[h!]
@@ -524,31 +537,31 @@ For this reason, this algorithm is effectively implemented over a local cluster
 \label{fig:ch1:16}
 \end{figure}
 
-The communications of the synchronous iterative algorithm can be implemented asynchronously. Therefore, this algorithm is called the synchronous iteration and asynchronous 
-communication algorithm and denoted as \textbf{SIAC} algorithm. The main principle of this algorithm is to use a synchronized iterations while exchanging the data between the computing units asynchronously.
-Moreover, each computing unit not has to wait for its neighbours to receive the data messages 
-that its has sent, while it only waits for receiving the  data from them. This can be implemented in SISC algorithm by replacing the synchronous send of the messages by asynchronous ones and keeps 
-the synchronous receive of the data messages. The only advantage of this technique is to reduce the idle times between the iterations by making the communications to overlap partially
+Furthermore, the communications of the synchronous iterative algorithm can be implemented asynchronously. Therefore, this algorithm is called  Synchronous Iteration and Asynchronous 
+Communication  and denoted as \textbf{SIAC} algorithm. The main principle of this algorithm is to use a synchronized iterations while exchanging the data between the computing units asynchronously.
+Moreover, each computing unit doesn't need to wait for its neighbours to receive the data messages 
+that it has sent, while it only waits to receive  data from them. This can be implemented with SISC algorithm that is programmed in MPI by replacing the synchronous send of the messages by asynchronous ones, while keeping  
+the synchronous receive. The only advantage of this technique is to reduce the idle times between iterations by allowing the communications to overlap partially
 with computations, see figure \ref{fig:ch1:16}. The idle times are not totally eliminated  because the
-fast computing nodes have to wait for slow ones to send their data messages. 
-Both of the SISC and SIAC algorithms are not tolerate to the loss of data messages. Consequently, if one node is crashed,  all the other computing nodes are blocked together and all the system is crashed.
+fast computing nodes must  wait for slow ones to send their data messages. 
+SISC and SIAC algorithms are not tolerated to the loss of data messages. Consequently, if one node is crashed,  all the other computing nodes are blocked together and all the system is crashed.
 
 
  
 \subsection{Asynchronous Parallel Iterative method} 
 \label{ch1:3:2}
-The asynchronous iterations mean that all processors perform their iterations without considering the works of the other processors. Each processor not has to wait for receiving
-the data messages from the others processors and continue computing the next iteration depending on its own data received at a specific time. While all processors not have to wait 
-for data delivery from each other, there are not existence for the idle times at all between the iterations, see figure \ref{fig:ch1:17}. As shown in this figure, the fast processors can perform more iterations than the others at the same time. 
-The asynchronous iterative algorithm uses asynchronous communications and called  \textbf{AIAC} algorithm. As same as in SISC algorithm, the AIAC algorithm subdivides the global Vectors $X$ into $M$ sub-vectors between the computing units. The main different between the two algorithm is that these $M$ sub-vectors are not updated at each iteration in the AIAC algorithm because both of the iterations and communications are asynchronous. 
-However, there are two mechanisms to update the data vectors in AIAC algorithm:
+The asynchronous iterations mean that all processors perform their iterations without considering the works of  other processors. Each processor doesn't have to wait to receive 
+data messages from  other processors and continues to compute the next iteration depending on its own data received at a specific time. While all processors don't have  to wait 
+for data delivery from each other, there are not existence of the idle times at all between the iterations as in figure \ref{fig:ch1:17}.  This figure indicates that  fast processors can perform more iterations than  others at the same time. 
+Hence, the asynchronous iterative algorithm that uses an asynchronous communications  is called  \textbf{AIAC} algorithm. Similarly to the SISC algorithm, the AIAC algorithm subdivides the global vectors $X$ into $M$ sub-vectors between the computing units. The main difference between the two algorithms is that these $M$ sub-vectors are not updated at each iteration in the AIAC algorithm because both  iterations and communications are asynchronous. 
+However, there are two mechanisms to update  data vectors in AIAC algorithm which are:
  \begin{itemize}
  \item  The local vectors can be updated randomly on the order of $M$ computing units.
-        This leads to some of these local vectors to not update at a certain time. 
- \item  According to the time period $t$, each computing unit checks if one of the its 
-        dependencies components have been updated. If the computing node detects any update 
-        case, it updates its own local vector data using the last received data messages.
-        Otherwise, it does nothing at the time $t$.
+        Indeed,  some of these local vectors may be not able to update at a certain time. 
+ \item  According to the time period $t$, each computing unit checks if one of its 
+        dependencies components has been updated. If the computing node detects any update, 
+        then it updates its own local vector data using the last received data messages.
+        Otherwise, nothing is occurred at the time $t$.
  \end{itemize}
 
 
@@ -559,61 +572,58 @@ However, there are two mechanisms to update the data vectors in AIAC algorithm:
 \label{fig:ch1:17}
 \end{figure}
 
-The global convergence of the parallel iterative method depend on the scientific application.
-For more information about the convergence detection techniques of the asynchronous iterative methods,
-we refer to \cite{ref40,ref41,ref42,ref43} for more details. 
+The global convergence of the parallel iterative method depends on the scientific application.
+For more information about the convergence detection techniques of the asynchronous iterative methods, refer to \cite{ref40,ref41,ref42,ref43} for more details. 
 
 
-The implementation of the AIAC method is not easy, but it gives many advantages over the traditional synchronous iterative method:
+The implementation of the AIAC method is not easy, but it gives many advantages over the traditional synchronous iterative method. These features can be summarized as follows:
 
 \begin{itemize}
-\item It prevents the existence of the  idle times because each processor not has to wait 
-      for the others to receive the data messages. Then, no idle times between each two  
+\item It prevents the existence of the  idle times, since each processor doesn't have to wait 
+      for  others to receive the data messages. Then, there are no idle times between each two  
       successive iterations.
       
-\item Less sensitive for the heterogeneous communications and nodes' computing powers. In a 
-      heterogeneous platform, the fast nodes not have to wait for the slow ones and so it 
-      performs more iterations than them. While in the traditional synchronous iterative 
-      methods, the fast computing nodes perform the same number of iterations as the slow ones
-      because they are blocked together. 
-
-\item The loss of the data messages is totally tolerant because each computing unit is not 
-      blocked with the others. If the message is lost, the destination node not has to wait  
+\item Less sensitive for the heterogeneous communications and nodes' computing powers. In heterogeneous 
+      platform, the faster nodes don't need to wait for the slow ones, so it can  perform more iterations compared 
+      to them. While in the traditional synchronous iterative methods, the fast computing nodes perform the same 
+      number of iterations as the slow ones because they are blocked together. 
+
+\item The loss of the data messages is totally tolerant because each computing unit can not to be 
+      blocked by others. If the message is lost, the destination node doesn't have to wait  
       for this data message and it uses the last received data to perform its iteration  
       independently.
       
 \item In the distributed grid architecture, the local clusters from different sites are 
-      connected via slow network with a high latency. The use of the AIAC model reduces the
-      delay of sending the data message over such slow network link and thus the performance 
-      of the applications is improved.
+      connected via slow network with a high latency. On the other hand, the use of the AIAC model 
+      reduces the delay of sending the data message over such slow network link and thus the performance 
+      of  applications is improved.
 \end{itemize}
 
 
 In addition to the difficulty of applying the asynchronous iterative method, it has some 
-disadvantages as follows:
+disadvantages that can be summarized by these points:
 
 \begin{itemize}
-\item It is not compatible to all types of the iterative applications because some of these 
-      applications need to receive the data messages from its neighbours at each iteration.   
+\item It is not compatible with all types of the iterative applications because some of these 
+      applications need to receive  data messages from its neighbours at each iteration.   
       Therefore, they required a fix number of iterations to converge. Otherwise, the 
-      application is perform  infinity number of iterations  and then all of the system 
-      is crash. 
+      application performs  an infinity number of iterations which provides a system crash.
  
-\item The application of the asynchronous iterative method requires more iterations compared 
+\item The application of an asynchronous iterative method requires more iterations compared 
       to the synchronous ones to converge  when it is executed over the local cluster. 
-      The increase in the number of  the iterations may increases proportionally 
+      The increase in the number of iterations may increase proportionally 
       the execution time of the application. 
       Especially, the local computing cluster uses a high speed network, then running the 
       synchronous version over such platform is quicker to converge.
     
-\item While the process not receive the new data messages at each iteration, the mechanism of 
+\item While the process  doesn't receive the new data messages at each iteration, the mechanism of 
        synchronous iterative methods for detecting the global convergence cannot be used for 
-      asynchronous ones. Therefore, in AIAC algorithm a process can performs many iterations    
+      asynchronous ones. Therefore, in AIAC algorithm a process can perform many iterations    
       without receiving any data messages from its neighbours. The absence of receiving new 
-      data messages makes the data component not vary at the computing units and thus it detect 
-      a false local convergence. This mean that the local residual value is less than the   
+      data messages makes the data component invariant at the computing units and thus it provides 
+      a false local convergence. This means that the local residual value is less than the   
       required threshold. This fake convergence is conflicted at the reception of the first data message 
-      because the local subsystem will locally diverges after computing the next iteration. 
+      because the local subsystem will locally diverge after computing the next iteration. 
       Therefore, special mechanisms are required for detecting the global convergence of a parallel 
       iterative algorithm implemented according to the asynchronous iteration model.
 
@@ -623,15 +633,15 @@ disadvantages as follows:
 Generally, the interested readers can find more details about both of synchronous and asynchronous 
 iterative methods in \cite{ref44,ref45}.
 
-In our works, we are interested to implement both of a synchronous and asynchronous 
-iterative methods for solving different problems over local homogeneous cluster, local heterogeneous cluster and distributed grid. Then, the process of optimizing their energy consumptions and performance is the main objective of this work as shown in the coming chapters. 
+In our works, we are interested to implement both synchronous and asynchronous 
+iterative methods to solve different problems over local homogeneous cluster, local heterogeneous cluster and distributed grid. Accordingly, the process of optimizing their energy consumptions and their performance is the main objective of this work as will be discussed in the next chapters. 
 
 
 \section{The energy consumption model of the parallel applications } 
 \label{ch1:4}
 
 Many researchers~\cite{ref46,ref47,ref48,ref49} divide the power consumed by a processor into
-two power metrics: the static and the dynamic power.  While the first one is
+two power metrics:  static power and  dynamic power.  The first one is
 consumed as long as the computing unit is on, the latter is only consumed during
 computation times.  The dynamic power $P_{dyn}$ is related to the switching
 activity $\alpha$, load capacitance $C_L$, the supply voltage $V$ and
@@ -652,7 +662,7 @@ technology-dependent parameter.
 
 The dynamic voltage and frequency scaling technique (\textbf{DVFS}) is a process that is allowed in modern processors to reduce the dynamic
 power by scaling down the voltage and frequency.  Its main objective is to
-reduce the overall energy consumption~\cite{ref77}.  The operational frequency $F$
+reduce the overall energy consumption of the CPU~\cite{ref77}.  The operational frequency $F$
 depends linearly on the supply voltage $V$ as follows:
 \begin{equation} 
 \label{eq:v}
@@ -719,14 +729,15 @@ According to the equation \ref{eq:E}, the dynamic energy consumption of the prog
 \end{equation}
 
 
-According to \cite{ref46,ref47}, the static power consumption $P_{static}$  is not changes when the frequency of the processors is scaled down. Therefore, the static energy consumption can be computed as follows:
+According to \cite{ref46,ref47}, the static power consumption $P_{static}$  does not changed when the frequency of the processors is scaled down. Therefore, the static energy consumption can be computed as follows:
 \begin{equation}
   \label{eq:Estatic}
    E_{static} = S \cdot  P_{static}  \cdot T
 \end{equation}
 
 
-Therefore, the energy consumption of the individual task running over one processor can be computed as follows:
+Therefore, the energy consumption of the individual task running over one processor 
+is the sum of both static and dynamic energies that  can be computed as follows:
 \begin{equation}
  \label{eq:Eind}
   E_{ind} =  E_{dynNew} + E_{static} = S^{-2} \cdot P_{dyn} \cdot  T + S \cdot  P_{static}  \cdot T
@@ -734,7 +745,7 @@ Therefore, the energy consumption of the individual task running over one proces
 
  
 Depending on \ref{eq:Eind}, the total energy consumption of $N$  parallel task  running on $N$ processors is the summation  of the individual energies consumed by all processors. This model is developed and used by  Rauber and RÃ¼nger~\cite{ref47}. They modeled 
-the total energy consumption for a parallel tasks running on a homogeneous platform by sorting the execution time of the all parallel tasks in a descending order, then their model can be  written as a function of the scaling factor $S$, as in EQ~(\ref{eq:energy}).
+the total energy consumption for parallel tasks running on a homogeneous platform by sorting the execution time of the all parallel tasks in a descending order, then their model can be  written as a function of the scaling factor $S$, as in EQ~(\ref{eq:energy}).
 
 \begin{equation}
   \label{eq:energy}
@@ -744,7 +755,7 @@ the total energy consumption for a parallel tasks running on a homogeneous platf
  \hfill
 \end{equation}
 
-Where $N$ is the number of parallel nodes, $T_i$  for $i=1,\dots,N$ are
+Where $N$ is the number of parallel tasks, $T_i$  for $i=1,\dots,N$ are
 the execution times of the sorted tasks.  Therefore, $T1$ is
 the time of the slowest task, and $S_1$ its scaling factor which should be the
 highest because they are proportional to the time values $T_i$. 
@@ -760,18 +771,20 @@ There are two drawbacks of this energy model as follows:
 
 \item It is not well adapted to a heterogeneous architectures when there are different 
       types of the processors, which are consumed different dynamic and static powers. Then, this model is 
-      not able to measured the energy consumption of all the parallel system  because it depends on 
-      one value of the static and dynamic powers.
+      not able to measure the energy consumption of all the parallel systems  because it depends on 
+      one value for the static and dynamic powers.
 \end{itemize}
 
-Therefore, one of the more important goals of this work is to develop an energy models that 
-take into account the communication times in addition to computation times to modelize and measure the energy consumptions of the parallel iterative methods. These models are dedicated to all parallel architectures such as the homogeneous and heterogeneous platforms, which are local or distributed computing clusters.  
+Therefore, one of the more important goals of this work is to develop a new energy models that 
+must be taken into consideration the communication times in addition to the  computation times in order to modelize and measure the energy consumptions of the parallel iterative methods. These models must be suitable to efficiently integrate with all parallel architectures such as the homogeneous and heterogeneous platforms, with its  local or distributed computing clusters.  
 
 \section{Conclusion}
 \label{ch1:5}
-In this chapter, we have presented in general different types of parallelism levels that can be implemented in a software and hardware techniques. Furthermore, the types of the parallel architectures are demonstrated and classified according to how the computing units are connected to a memory model. 
-The two parallel systems  are described,  which are the shared and distributed platforms. Depending on these two types, we have categorized the parallel programming models. The parallel iterative methods are explained and their two types, the synchronous and asynchronous iterative methods, are described. The synchronous iterative methods are well implemented over local homogeneous cluster with a high speed network link, while the asynchronous iterative methods are more conventional to implement over the distributed heterogeneous clusters. 
-Consequently, running these two types of the parallel iterative methods over distributed platforms are interested in this work. The energy consumption model for  measuring the energy consumption of the parallel applications from the related literature is  described. This model  cannot be used for all types of parallel architectures. It is assumed to measure the dynamic power during both communication and computation times, while the processor involved remains idle during the communication times and  only consumes the static power. Moreover, it is not well adapted to the heterogeneous architectures when there are different
-types of the processors, which are consumed different dynamic and static powers.
-
-However, in the coming chapters of this thesis a new energy consumption models are developed, use for modeling and measuring the energies consumed by a parallel iterative methods running on both homogeneous and heterogeneous architectures. 
+In this chapter, three sections have been presented to describe the parallel hardware architectures, parallel iterative applications and the energy consumption model used to measure the energies of these applications. 
+The different types of parallelism levels that can be implemented in  software and hardware techniques have been explained in the first section. Furthermore, different types of  parallel architectures have been discussed and classified according to the connection between the computation units and the memory model.  
+Both  shared and distributed platforms as well as its depending parallel programming models have been categorized.
+In the second section, the two types of parallel iterative methods: synchronous and asynchronous ones are investigated.
+The synchronous iterative methods are well implemented over local homogeneous cluster with a high speed network link, while the asynchronous iterative methods are more conventional to implement over the distributed heterogeneous clusters. 
+Finally, in the third section, an energy consumption model proposed in the state of the art to  measure the energy consumption of parallel applications is explained. This model  cannot be used for all types of parallel architectures. Since, it assumes  to measure the dynamic power during both of the communication and computation times, while the processor involved remains idle during the communication times and  only consumes the static power. Moreover, it is not well adapted to  heterogeneous architectures when there are different types of the processors, that consume different dynamic and static powers at the same time.
+
+For these reasons, in the next chapters of this thesis a new energy consumption models are developed to effectively integrate in modeling and measuring the energy consumptions by parallel iterative methods running on both homogeneous and heterogeneous architectures.  Additionally, these energy models are used in a method to optimize  both  energy consumption and performance of the iterative message passing applications. 
\ No newline at end of file
