%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{Related Literatures}
+\chapter{Related Works on Coverage Problems}
\label{ch2}
\section{Introduction}
\label{ch2:sec:01}
-The main objective of deploying a large number of wireless sensor nodes in the target area of interest is to construct a WSN, which is responsible for monitoring and observation the sensing field, and detecting the required important event in the area of interest. The coverage problem represents the principle requirement in these applications. The main question that shared by these applications is how can the deployed wireless sensor nodes monitor the physical phenomenon properly. The coverage can be considered as one of the QoS (Quality of Service) parameters, and it is closely related with energy consumption. It represents the sensing task supplied by the wireless sensors in WSNs.
+The main objective of deploying a large number of wireless sensor nodes in the target area of interest is to construct a WSN, which is responsible for monitoring and observation the sensing field, and detecting the required important event in the area of interest. The coverage problem represents the principle requirement in these applications. The main question that shared by these applications is how can the deployed wireless sensor nodes monitor the physical phenomenon properly. The coverage can be considered as one of the QoS (Quality of Service) parameters, and it is closely related to energy consumption. It represents the sensing task supplied by the wireless sensors in WSNs.
-The energy resource limitation of wireless sensor nodes have been considered as a big challenge in order to operate the WSN with less energy consumption, while fulfill the coverage requirement. The the main objective of scattering the wireless sensor nodes over the area of interest is to collect the sensed data of the physical phenomena for processing or reporting, where there are two types of reporting for sensed data in WSNs~\cite{ref138} like event-driven and on-demand. In the latter, the monitoring base station start the reporting operation by transmitting a request to the wireless sensor nodes so as to send their sensed data to the base station, for example, the inventory tracking application. In the former, the reporting operation is triggered by one or more wireless sensor nodes within the physical phenomena by transmitting their sensed data to the controlling base station, for instance, the forest-fire detection application. The hybrid scheme of the two types is more flexible.
-The ultimate goal of the coverage is to assure that each point in the sensing field is within the sensing range of at least one sensor node. There are some applications require high reliability to perform their tasks, so they need that every point in the sensing field is covered by more than one sensor node. In order to avoid the lack in monitoring the area of interest, it is necessary that the WSN are deployed with high density so as to exploit the overlapping among the sensor nodes and to prevent malfunction of sensor nodes in severe environments. The overlap can be exploited by choosing the minimum number of sensor nodes to perform the main tasks of the WSN in the sensing field and putting the rest sensor nodes in very low power sleep mode so as to prolong the network lifetime. This exploitation manner is called sensor activity scheduling that aims to set the activity state of each sensor node in the WSN so that the sensing field can be monitored for a long time as possible. The required level of coverage should be guaranteed by the activity based scheduling scheme~\cite{ref139}. There are many scheduling algorithms have been described in~\cite{ref58,ref57}.
+The energy resource limitation of wireless sensor nodes has been considered as a big challenge in order to operate the WSN with less energy consumption whilst fulfill the coverage requirement. The main objective of scattering the wireless sensor nodes over the area of interest is to collect the sensed data of the physical phenomena for processing or reporting, where there are two types of reporting for sensed data in WSNs~\cite{ref138} like event-driven and on-demand. In the latter, the monitoring base station start the reporting operation by transmitting a request to the wireless sensor nodes so as to send their sensed data to the base station; for example, the inventory tracking application. In the former, the reporting operation is triggered by one or more wireless sensor nodes within the physical phenomena by transmitting their sensed data to the controlling base station; for instance, the forest fire detection application. The hybrid scheme of the two types is more flexible.
-This dissertation focuses on the problem of covering the area of interest as long as possible. There are several proposed approches to extend the network lifetime, while maintaing the coverage have been syrvayed in this chapter. M. Cardei and J. Wu~\cite{ref113} have been surveyed the different coverage formulation models and their assumptions, as well as the solutions provided. In~\cite{ref105}, several coverage problems are presented from different angles, where the models and assumptions as well as proposed solutions in the literatures are described. In this dissertation, the main contribution of previous works that deal with the coverage problem have been addressed. We end this chapter by focusing on two algorithms, GAF~\cite{GAF} and DESK~\cite{DESK}, since they have been used for comparisons against our coverage protocols.
+The ultimate goal of the coverage is to ensure that each point in the sensing field is within the sensing range of at least one sensor node. Some applications require high reliability to perform their tasks, so they need that every point in the sensing field is covered by more than one sensor node. In order to avoid the lack in monitoring the area of interest, it is necessary that the WSN are deployed with high density so as to exploit the overlapping among the sensor nodes and to prevent malfunction of sensor nodes in severe environments. The overlap can be exploited by choosing the minimum number of sensor nodes to perform the main tasks of the WSN in the sensing field and putting the rest sensor nodes in very low power sleep mode so as to prolong the network lifetime. This exploitation manner is called sensor activity scheduling that aims to set the activity state of each sensor node in the WSN so that the sensing field can be monitored for a long time as possible. The required level of coverage should be guaranteed by the activity-based scheduling scheme~\cite{ref139}. Many scheduling algorithms have been described in~\cite{ref58,ref57}.
+%This dissertation focuses on the problem of covering the area of interest as long as possible. Several proposed approaches to extend the network lifetime whilst maintaining the coverage have been viewed in this chapter. M. Cardei and J. Wu~\cite{ref113} have been surveyed the different coverage formulation models and their assumptions, as well as the solutions provided. In~\cite{ref105}, several coverage problems are presented from different angles, where the models and assumptions, as well as proposed solutions in the literatures, are described. In this dissertation, the main contribution of previous works that deal with the coverage problem have been addressed. We end this chapter by focusing on two algorithms, GAF~\cite{GAF} and DESK~\cite{DESK}, since they have been used for comparison against our coverage protocols.
-\section{Coverage Algorithms}
-\label{ch2:sec:02}
-\indent This section is dedicated to the various approaches proposed in the
+%\section{Coverage Algorithms}
+%\label{ch2:sec:02}
+
+\indent This chapter is dedicated to the various approaches proposed in the
literature for the coverage lifetime maximization problem, where the objective
is to optimally schedule sensors' activities in order to extend network lifetime
-in WSNs. Cardei and Wu~\cite{ref113} provide a taxonomy for coverage algorithms in WSNs according to several design choices:
+in WSNs.
+In~\cite{ref105}, several coverage problems are presented from different angles, where the models and assumptions, as well as proposed solutions in the literatures, are described.
+M. Cardei and J. Wu~\cite{ref113} survey the different coverage formulation models and their assumptions, as well as the solutions provided. They provide a taxonomy for coverage algorithms in WSNs according to several design choices:
\begin{enumerate} [(i)]
\item Sensors scheduling algorithm implementation, i.e. centralized or distributed/localized algorithms.
\item The objective of sensor coverage, i.e. to maximize the network lifetime or
- to minimize the number of sensors during a sensing round.
+ to minimize the number of active sensors during a sensing round.
\item The homogeneous or heterogeneous nature of the nodes, in terms of sensing or communication capabilities.
\item The node deployment method, which may be random or deterministic.
\item Additional requirements for energy-efficient and connected coverage.
\end{enumerate}
-The choice of non-disjoint or disjoint cover sets (sensors participate or not in many cover sets), coverage type ( area, target, or barrier), coverage ratio, coverage degree (how many sensors are required to cover a target or an area) can be added to the above list.
+From our point of view, the choice of non-disjoint or disjoint cover sets (sensors participate or not in many cover sets), coverage type ( area, target, or barrier), coverage ratio, coverage degree (how many sensors are required to cover a target or an area) can be added to the above list.
-Once a sensor nodes are deployed, a coverage algorithm is run to schedule the sensor nodes into cover sets so as to maintain sufficient coverage in the area of interest and extend the network lifetime. The WSN applications require (complete or partial) area coverage and complete target coverage. Many centralized algorithms and distributed algorithms for activity scheduling have been proposed in the literature, and based on different assumptions and objectives. In centralized algorithms, a central controller makes all decisions and distributes the results to sensor nodes. A distributed algorithms, on the other hand, the decision process is localized in each individual sensor node, and only information from neighboring nodes are used for the activity decision. Compared to centralized algorithms, distributed algorithms reduce the energy consumption required for radio communication and detection accuracy whilst increase the energy consumption for computation. Overall, distributed algorithms are more suitable for large-scale networks, but it can not give optimal (or near optimal) solution based only on local information. Several algorithms to retain the coverage and maximize the network lifetime were proposed in~\cite{ref113,ref153,ref103,ref105}. Table~\ref{Table1:ch2} summarized the main characteristics of some coverage approaches in previous literatures.
+Once a sensor nodes are deployed, a coverage algorithm is run to schedule the sensor nodes into cover sets so as to maintain sufficient coverage in the area of interest and extend the network lifetime. The WSN applications require either complete or partial to area coverage and for target coverage, all the target should be covered. This chapter concentrates only on area coverage and target coverage problems because it is possible to transform the area coverage problem to target ( or point) coverage problem and vice versa. We have excluded the barrier coverage problem from this discussion about the coverage problems because it is outside the scope of this dissertation.
+This dissertation focuses mainly on the area coverage problem, where the ultimate goal of the area coverage problem is to choose the minimum number of sensor nodes to cover the whole sensing field.
+%We have focused mainly on the area coverage problem. Therefore, we represent the sensing area of each sensor node in the sensing field as a set of primary points and then achieving full area coverage by covering all the points in the sensing field. The ultimate goal of the area coverage problem is to choose the minimum number of sensor nodes to cover the whole sensing region and prolonging the lifetime of the WSN.
+Many centralized and distributed coverage algorithms for activity scheduling have been proposed in the literature and based on different assumptions and objectives. In centralized algorithms, a central controller makes all decisions and distributes the results to sensor nodes. The centralized algorithms have the advantage of requiring very low processing power from the sensor nodes which have usually limited processing capabilities. On the contrary, the exchange of packets in large WSNs may consume a considerable amount of energy in a centralized approach compared to a distributed one. Moreover, centralized approaches usually suffer from the scalability and reliability problems, making them less competitive as the network size increases.
-\subsection{Centralized Algorithms}
-\label{ch2:sec:03}
-The major approach is to divide/organize the sensors into a suitable number of cover sets where each set completely covers an interest region and to activate these cover sets successively. The centralized algorithms always provide nearly or close to optimal solution since the algorithm has global view of the whole network. Note that centralized algorithms have the advantage of requiring very low processing power from the sensor nodes, which usually have limited processing capabilities. The main drawback of this kind of approach is its higher cost in communications, since the node that will make the decision needs information from all the sensor nodes. Moreover, centralized approaches usually suffer from the scalability problem, making them less competitive as the network size increases.
+In a distributed algorithms, on the other hand, the decision process is localized in each individual sensor node, and the only information from neighboring nodes are used for the activity decision. Compared to centralized algorithms, distributed algorithms reduce the energy consumption required for radio communication and detection accuracy whilst increase the energy consumption for computation. Overall, distributed algorithms are more suitable for large-scale networks, but it can not give optimal (or near-optimal) solution based only on local information. Moreover, a recent study conducted in \cite{ref226} concludes that there is a threshold in terms of network size to switch from a distributed to a centralized algorithm. Table~\ref{Table0:ch2} shows a comparison between the centralized coverage algorithms and the distributed coverage algorithms.
-The first algorithms proposed in the literature consider that the cover sets are disjoint: a sensor node appears in exactly one of the generated cover sets~\cite{ref114,ref115,ref116}. In the case of non-disjoint algorithms~\cite{ref117}, sensors may participate in more than one cover set. In some cases, this may prolong the lifetime of the network in comparison to the disjoint cover set algorithms, but designing algorithms for non-disjoint cover sets generally induces a higher order of complexity. Moreover, in case of a sensor's failure, non-disjoint scheduling policies are less resilient and reliable because a sensor may be involved in more than one cover sets.
-
-In~\cite{ref118}, the authors have considered a linear programming approach to select the minimum number of working sensor nodes, in order to preserve a maximum coverage and to extend lifetime of the network.
-The work in~\cite{ref144} addressed the target area coverage problem by proposing a geometric-based activity scheduling scheme, named GAS, to fully cover the target area in WSNs. The authors deals with small area (target area coverage), which can be monitored by a single sensor instead of area coverage, which focuses on a large area that should be monitored by many sensors cooperatively. They explained that GAS is capable to monitor the target area by using a few sensors as possible and it can produce as many cover sets as possible.
+\begin{table}[h]
+\caption{Centralized Coverage Algorithms vs Distributed Coverage Algorithms}
+\begin{center}
+\begin{tabular}{ |p{3cm}|p{5cm}|p{5cm}|}
+\hline
+
+\textbf{\begin{center} Characteristics \end{center}} & \textbf{\begin{center} Centralized Coverage Algorithms \end{center}} & \textbf{\begin{center} Distributed Coverage Algorithms \end{center}}\\ \hline
+
+\textbf{\begin{center} Computation \end{center}} & Require low processing power where the algorithm is executed only in one elected node. & Require large processing power due to execution the algorithm in every node in WSN. \\ \hline
-A novel method to divide the sensors in the WSN, called node coverage grouping (NCG) suggested~\cite{ref147}. The sensors in the connectivity group are within sensing range of each other, and the data collected by them in the same group are supposed to be similar. They are proved that dividing n sensors via NCG into connectivity groups is a NP-hard problem. So, a heuristic algorithm of NCG with time complexity of $O(n^3)$ is proposed.
-For some applications, such as monitoring an ecosystem with extremely diversified environment, It might be premature assumption that sensors near to each other sense similar data.
+\textbf{\begin{center} Communication \end{center}} & Sensor nodes communicate directly with the base station, therefore, they require low-power consumption for communication. & Sensor nodes require high power consumption for communication because of the frequent exchange of hello packets. \\ \hline
-In~\cite{ref148}, the problem of minimum cost coverage in which full coverage is performed by using the minimum number of sensors for an arbitrary geometric shape region is addressed. a geometric solution to the minimum cost coverage problem under a deterministic deployment is proposed. The probabilistic coverage solution which provides a relationship between the probability of coverage and the number of randomly deployed sensors in an arbitrarily-shaped region is suggested. The authors are clarified that with a random deployment about seven times more nodes are required to supply full coverage.
+\textbf{\begin{center} Decision \end{center}} & Ensure nearly or close to optimal solution. & Can not ensure optimal (or near-optimal) solution.\\ \hline
-Li et al.~\cite{ref142} presented a framework to convert any complete coverage problem to a partial coverage one with any coverage ratio by means of executing a complete coverage algorithm to find a full coverage sets with virtual radii and transforming the coverage sets to a partial coverage sets by adjusting sensing radii. The properties of the original algorithms can be maintained by this framework and the transformation process has a low execution time.
+\textbf{\begin{center} Redundancy \end{center}} & Provide less redundant active sensor nodes during monitoring the sensing field. & Provide more redundant active sensor nodes during monitoring the sensing field.\\ \hline
-The problem of k-coverage in WSNs was addressed~\cite{ref152}. It mathematically formulated and the spacial sensor density for full k-coverage determined, where the relation between the communication range and the sensing range constructed by this work to retain the k-coverage and connectivity in WSN. After that, a four configuration protocols have proposed for treating the k-coverage in WSNs.
+\textbf{\begin{center} Energy Consumption \end{center}} & Energy consumption is large especially when the network size and/or density increase. & Energy consumption is low because they have lower communication cost. \\ \hline
-Liu et al.~\cite{ref150} formulated maximum disjoint sets problem for retaining coverage and connectivity in WSN. Two algorithms are proposed for solving this problem, heuristic algorithm and network flow algorithm. This work did not take into account the sensor node failure, which is an unpredictable event because the two solutions are full centralized algorithms.
+\textbf{\begin{center} Scalability \end{center}} & Scalable only with dividing the sensing field into smaller subregions. & More scalable for large networks. \\ \hline
-Cheng et al.~\cite{ref119} have defined a heuristic algorithm called Cover Sets
-Balance (CSB), which chooses a set of active nodes using the tuple (data
-coverage range, residual energy). Then, they have introduced a new Correlated
-Node Set Computing (CNSC) algorithm to find the correlated node set for a given
-node. After that, they proposed a High Residual Energy First (HREF) node selection algorithm to minimize the number of active nodes so as to prolong the network lifetime.
+\textbf{\begin{center} Reliability \end{center}} & Less robust against sensor failure. & More robust against sensor failure. \\ \hline
+
+\end{tabular}
+\end{center}
+\label{Table0:ch2}
+\end{table}
-In~\cite{ref141}, the problem of full grid coverage is formulated using two integer linear programming models: the first, a model that takes into account only the overall coverage constraint; the second, both the connectivity and the full grid coverage constraints have taken into consideration. This work did not take into account the energy constraint.
-The work that presented in~\cite{ref151} solved the coverage and connectivity problem in sensor networks in
-an integrated way. The network lifetime is divided in a fixed number of rounds. A coverage bitmap of sensors of the domain has been generated in each round and based on this bitmap, it has been decided which sensors
-stay active or turn it to sleep. They checked the connection of the graph via laplacian of adjancy graph of active sensors in each round. the generation of coverage bitmap by using Minkowski technique, the network is able to providing the desired ratio of coverage. They have been defined the connected coverage problem as an optimization problem and a centralized genetic algorithm is used to find the solution.
+In this dissertation, the sensing field is divided into smaller subregions using divide-and-conquer method. The division continues until the distance between each two sensors inside the subregion is 3 or 2 hops maximum. This division makes our protocols more scalable for large networks, less energy consumer for communication, less processing power for decision, and more reliable against network failure. Our proposed protocols are distributed on the sensor nodes of the subregions. The protocols in each subregion work in independent and simultaneous way with the protocols in the other subregions. If the network disconnected in one subregion, it will not affect the other subregions of the sensing field. There is no a fixed sensor node in the subregion for executing the optimization algorithm. Each period of the network lifetime, the sensor nodes in the subregion cooperate in order to select a sensor node to execute the optimization algorithm according to a predefined priority metrics. The local optimal schedule resulted from the optimization algorithm is applied within the subregion. The elected sensor node sends a packet to every sensor within the subregion to inform him to stay active or sleep during this period. Each optimization algorithm in a subregion provides locally optimal solution, so the solution for all the sensing field is near-optimal.
+
+Several algorithms to retain the coverage and maximize the network lifetime were proposed in~\cite{ref113,ref101,ref103,ref105}. Table~\ref{Table1:ch2} summarized the main characteristics of some coverage approaches in previous literatures. In table~\ref{Table1:ch2}, the "SET K-COVER" characteristic refers to the maximum number of disjoint or non-disjoint sets of sensors such that each set cover can assure the coverage for the whole region. The K-COVER algorithm provides a solution with K cover sets in each execution. The k-coverage characteristic refers to that every point inside the monitored area is always covered by at least k active sensors.
+
+
+
+\section{Centralized Algorithms}
+\label{ch2:sec:02}
+The major idea of most centralized algorithms is to divide/organize the sensors into a suitable number of cover sets, where each set completely covers an interest region and to activate these cover sets successively. The centralized algorithms always provide optimal or near-optimal solution since the algorithm has a global view of the whole network. Energy-efficient centralized approaches differ according to several criteria \cite{ref113}, such as the coverage objective (target coverage or area coverage), the node deployment method (random or deterministic), and the heterogeneity of sensor nodes (common sensing range, common battery lifetime).
+
+The first algorithms proposed in the literature consider that the cover sets are disjoint: a sensor node appears in exactly one of the generated cover sets~\cite{ref114,ref115,ref116}. For instance, Slijepcevic and Potkonjak \cite{ref116} propose an algorithm, which allocates sensor nodes in mutually independent sets to monitor an area divided into several fields. Their algorithm builds a cover set by including in priority the sensor nodes, which cover critical fields, that is to say, fields that are covered by the smallest number of sensors. The time complexity of their heuristic is $O(n^2)$ where $n$ is the number of sensors. M. Cardei et al.~\cite{ref227}, suggest a graph coloring technique to achieve energy savings by organizing the sensor nodes into a maximum number of disjoint dominating sets, which are activated successively. They have defined the maximum disjoint dominating sets problem and they have produced a heuristic that computes the disjoint cover sets so as to monitor the area of interest. The dominating sets do not guarantee the coverage of the whole region of interest. Abrams et al.~\cite{ref114} design three approximation algorithms for a variation of the set k-cover problem, where the objective is to partition the sensors into covers such that the number of covers that include an area, summed over all areas, is maximized.
+Their work builds upon previous work in~\cite{ref116} and the generated cover sets do not provide complete coverage of the monitoring zone.
+
+
+The authors in~\cite{ref115} propose a heuristic to compute the disjoint set covers (DSC). In order to compute the maximum number of covers, they first transform DSC into a maximum-flow problem, which is then formulated as a mixed integer programming problem (MIP). Based on the solution of the MIP, they design a heuristic to compute the final number of covers. The results show a slight performance improvement in terms of the number of produced DSC in comparison to~\cite{ref116}, but it incurs higher execution time due to the complexity of the mixed integer programming solving. Zorbas et al. \cite{ref228} present B\{GOP\}, a centralized target coverage algorithm introducing sensor candidate categorization depending on their coverage status and the notion of critical target to call targets that are associated with a small number of sensors. The total running time of their heuristic is $0(m n^2)$ where
+$n$ is the number of sensors and $m$ the number of targets. Compared to algorithm's results of Slijepcevic and Potkonjak \cite{ref116}, their heuristic produces more cover sets with a slight growth rate in execution time. L. Liu et al.~\cite{ref150} formulate the maximum disjoint sets for maintaining target coverage and connectivity problem in WSN. They propose a graph theoretical framework to study the joint problem of connectivity and coverage in a WSN with random deployment of nodes with no restrictions on the sensing and communication ranges of nodes. They propose heuristic algorithms to find the suitable number of nodes to guarantee connectivity and coverage while maximizing network lifetime.
+%This work did not take into account the sensor node failure, which is an unpredictable event because the two solutions are full centralized algorithms.
+Y. Li et al.~\cite{ref142} present a framework with heuristic strategies to solve the area coverage problem. The framework converts any complete coverage problem to a partial coverage one with any coverage ratio. They execute a complete coverage algorithm to find a full coverage sets with virtual radii and transforming the coverage sets to a partial coverage sets by adjusting sensing radii . This framework has four strategies, two of them are designed for the network where the sensors have fixed sensing range and the other two are for the network where the sensors have adjustable sensing range. The properties of the algorithms can be maintained by this framework and the transformation process has a low execution time. The simulation results validate the efficiency of the four proposed strategies. More recently, Deschinkel and Hakem \cite{229} introduce a near-optimal heuristic algorithm for solving the target coverage problem in WSN. The sensor nodes are organized into disjoint cover sets by the resolution of an integer programming problem. Each cover set is capable of monitoring all the targets of the region of interest. Those covers sets are scheduled periodically. Their algorithm is able to construct the different cover sets in parallel. The results show that their algorithm achieves near-optimal solutions compared to the optimal ones obtained by the exact method.
-The authors in~\cite{ref143} explained that in some applications of WSNs such as structural health monitoring (SHM) and volcano monitoring, the traditional coverage model which is a geographic area defined for individual sensors is not always valid. For this reason, they define a generalized coverage model, which is not need to have the coverage area of individual nodes, but only based on a function to determine whether a set of
-sensor nodes is capable of satisfy the requested monitoring task for a certain area. They have proposed two approaches to divide the deployed nodes into suitable cover sets, which can be used to prolong the network lifetime.
-
-Various centralized methods based on column generation approaches have also been proposed~\cite{ref120,ref121,ref122}.
+In the case of non-disjoint algorithms~\cite{ref117}, sensors may participate in more than one cover set. In some cases, this may prolong the lifetime of the network in comparison to the disjoint cover set algorithms, but designing algorithms for non-disjoint cover sets generally induces a higher order of complexity. Moreover, in case of a sensor's failure, non-disjoint scheduling policies are less resilient and reliable because a sensor may be involved in more than one cover sets. For instance, Cardei et al.~\cite{ref167}
+present a linear programming (LP) solution and a greedy approach to
+extend the sensor network lifetime by organizing the sensors into a
+maximal number of non-disjoint cover sets. Simulation results show
+that by allowing sensors to participate in multiple sets, the network
+lifetime increases compared with related work~\cite{ref115}. The authors in~\cite{ref148}, address the problem of minimum cost area coverage in which full coverage is performed by using the minimum number of sensors for an arbitrary geometric shape region. A geometric solution to the minimum cost coverage problem under a deterministic deployment is proposed. The probabilistic coverage solution which provides a relationship between the probability of coverage and the number of randomly deployed sensors in an arbitrarily-shaped region is suggested. The authors explained that with a random deployment about seven times more nodes are required to supply full coverage compared to deterministic deployment. The work in~\cite{ref144} address the area coverage problem by proposing a geometrically based activity scheduling scheme, named GAS, to fully cover the area of interest in WSNs. The authors deal with a small area, called target area coverage, which can be monitored by a single sensor instead of area coverage, which focuses on a large area that should be monitored by many sensors cooperatively. They explained that GAS is capable to monitor the target area by using a few sensors as possible and it can produce as many cover sets as possible. A novel area coverage method to divide the sensors called node coverage grouping (NCG) is suggested~\cite{ref147}. The sensors in the connectivity group are within sensing range of each other, and the data collected by them in the same group are supposed to be similar. They proved that dividing N sensors via NCG into connectivity groups is an NP-hard problem. So, a heuristic algorithm of NCG with time complexity of $O(n^3)$ is proposed.
+For some applications, such as monitoring an ecosystem with extremely diversified environment, it might be premature assumption that sensors near to each other sense similar data. The problem of k-coverage over the area of interest in WSNs was addressed in~\cite{ref152}. It is mathematically formulated and the spatial sensor density for full k-coverage is determined. The relation between the communication range and the sensing range is constructed by this work to retain the k-coverage and connectivity in WSN. After that, four configuration protocols are proposed for treating the k-coverage in WSNs. Simulation results show that their protocols outperform an existing distributed k-coverage configuration protocol. The work presented in~\cite{ref151} solves the area coverage and connectivity problem in sensor networks in an integrated way. The network lifetime is divided into a fixed number of rounds. A coverage bitmap of sensors of the domain is generated in each round and based on this bitmap, it is decided which sensors stay active or go to sleep. They checked the connection of the graph via laplacian of the adjacency graph of active sensors in each round. The generation of coverage bitmap by using Minkowski technique, the network is able to providing the desired ratio of coverage. They defined the connected coverage problem as an optimization problem and a centralized genetic algorithm is used to find the solution.
+Recent studies show an increasing interest in the use of exact schemes to solve optimization problems in WSN \cite{ref230,ref231,ref121,ref122,ref120}. Column Generation (CG) has been widely used to address different versions of maximum network lifetime problem (MLP). CG decomposes the problem into a restricted master problem (RMP) and a pricing subproblem (PS). The former maximizes lifetime using an incomplete set of columns, and the latter is used to identify new profitable columns. A. Rossi et al.~\cite{ref121} introduce an efficient implementation of a genetic algorithm based on CG to extend the lifetime and maximize target coverage in wireless sensor networks under bandwidth constraints. The authors show that the use of metaheuristic methods to solve PS in the context of CG allows to obtain optimal solutions quite fast and to produce high-quality solutions when the algorithm is stopped before returning an optimal solution. More recently, F. Castano et al. \cite{ref120} address the maximum network lifetime and the target coverage problem in WSNs with connectivity and coverage constraints. They consider two cases to schedule the activity of a set of sensor nodes, keeping them connected while network lifetime is maximized. First, the full coverage of the targets is required, and second only a fraction of the targets has to be monitored at any instant of time. They propose an exact approach based on column generation and boosted by a greedy randomized adaptive search procedure (GRASP) and a variable neighborhood search (VNS) to address both of these problems. Finally, a multiphase framework combining these two approaches is constructed by sequentially using these two heuristics at each iteration of the column generation algorithm. The results show that combining the two heuristic methods enhances the results significantly.
-\subsection{Distributed Algorithms}
-\label{ch2:sec:04}
+More recently, the authors in~\cite{ref118}, consider an area coverage optimization algorithm based on linear programming approach to select the minimum number of working sensor nodes, in order to preserve a maximum coverage and to extend the lifetime of the network. The experimental results show that linear programming can provide a fewest number of active nodes and maximize the network lifetime coverage. M. Rebai et al.~\cite{ref141}, formulate the problem of full grid area coverage problem using two integer linear programming models: the first, a model that takes into account only the overall coverage constraint; the second, both the connectivity and the full grid coverage constraints are taken into consideration. This work does not take into account the energy constraint. H. Cheng et al.~\cite{ref119} define a heuristic area coverage algorithm called Cover Sets Balance (CSB), which chooses a set of active nodes using the tuple (data coverage range, residual energy). Then, they introduce a new Correlated Node Set Computing (CNSC) algorithm to find the correlated node set for a given node. After that, they propose a High Residual Energy First (HREF) node selection algorithm to minimize the number of active nodes so as to prolong the network lifetime. X. Liu et al.~\cite{ref143} explain that in some applications of WSNs such as structural health monitoring (SHM) and volcano monitoring, the traditional coverage model which is a geographic area defined for individual sensors is not always valid. For this reason, they define a generalized area coverage model, which is not required to have the coverage area of individual nodes, but only based on a function to determine whether a set of sensor nodes is capable of satisfy the requested monitoring task for a certain area. They propose two approaches for dividing the deployed nodes into suitable cover sets.
-In distributed and localized coverage algorithms, the required computation to schedule the activity of sensor nodes will be done by the cooperation among neighboring nodes. These algorithms may require more computation power for the processing by the cooperating sensor nodes, but they are more scalable for large WSNs. Localized and distributed algorithms generally result in non-disjoint set covers.
-Many distributed algorithms have been developed to perform the scheduling so as to preserve coverage, see for example \cite{ref123,ref124,ref125,ref126,ref109,ref127,ref128,ref129}.
-Distributed algorithms typically operate in rounds for a predetermined duration. At the beginning of each round, a sensor exchanges information with its neighbors and makes a decision to either remain turned on or to go to sleep for the round. This decision is basically made on simple greedy criteria like the largest uncovered area \cite{ref130} or maximum uncovered targets \cite{ref131}. The Distributed Adaptive Sleep Scheduling Algorithm (DASSA) \cite{ref127} does not require location information of sensors while maintaining connectivity and satisfying a user defined coverage target. In DASSA, nodes use the residual energy levels and feedback from the sink for scheduling the activity of their neighbors. This feedback mechanism reduces the randomness in scheduling that would otherwise occur due to the absence of location information.
+
+%Various centralized methods based on column generation approaches have also been proposed in~\cite{ref120,ref121,ref122}.
-Cho et al.~\cite{ref145} proposed a distributed node scheduling protocol, which can retain sensing coverage needed by applications
-and increase network lifetime via putting in sleep mode some redundant nodes. In this work, the effective sensing area (ESA) concept of a sensor node is used, which refers to the sensing area that is not overlapping with another sensor's sensing area. A sensor node and by compute it's ESA can be determine whether it will be active or sleep. The suggested work permits to sensor nodes to be in sleep mode opportunistically whilst fulfill the needed sensing coverage.
-In~\cite{ref146}, the authors defined a maximum sensing coverage region problem (MSCR) in WSNs and then proposed a distributed algorithm to solve it. The
-maximum observed area fully covered by a minimum active sensors. In this work, the major property is to getting rid from the redundant sensors in high-density WSNs and putting them in sleep mode, and choosing a smaller number of active sensors so as to be sure that the full area is k-covered, and all events appeared in that area can be precisely and timely detected. This algorithm minimized the total energy consumption and increased the lifetime.
-A graph theoretical framework for connectivity-based coverage with configurable coverage granularity was proposed~\cite{ref149}. A new coverage criterion and scheduling approach is proposed based on cycle partition. This method is capable of build a sparse coverage set in distributed way by means of only connectivity information. This work considers only the communication range of the sensor is smaller two times the sensing range of sensor.
+\section{Distributed Algorithms}
+\label{ch2:sec:03}
+
+%In distributed and localized coverage algorithms, the required computation to schedule the activity of sensor nodes will be done by the cooperation among neighboring nodes. These algorithms may require more computation power for the processing by the cooperating sensor nodes, but they are more scalable for large WSNs.
-The works presented in~\cite{ref134,ref135,ref136} focus on coverage-aware, distributed energy-efficient, and distributed clustering methods respectively, which aim at extending the network lifetime, while the coverage is ensured.
+Many distributed algorithms have been developed to perform the scheduling so as to preserve coverage, see for example \cite{ref123,ref124,ref125,ref126,ref109,ref127,ref128,ref97}. Localized and distributed algorithms generally result in non-disjoint set covers.
-Shibo et al.~\cite{ref137} have expressed the coverage problem as a minimum weight submodular set cover problem and proposed a Distributed Truncated Greedy Algorithm (DTGA) to solve it. They take advantage from both temporal and spatial correlations between data sensed by different sensors, and leverage prediction, to improve the lifetime.
+X. Deng et al. \cite{ref133} formulate the area coverage problem as a decision problem, whose goal is to determine whether every point in the area of interest is monitored by at least k sensors. The authors prove that if the perimeters of sensors are sufficiently covered it will be the case for the whole area. They provide an algorithm in $O(nd~log~d)$ time to compute the perimeter coverage of each sensor, where $d$ denotes the maximum number of sensors that are neighboring to a sensor and $n$ is the total number of sensors in the network. Their solutions can be translated to distributed protocols to solve the coverage problem.
+Distributed algorithms typically operate in rounds for a predetermined duration. At the beginning of each round, a sensor exchanges information with its neighbors and makes a decision to either remain turned on or to go to sleep for the round. This decision is basically made on simple greedy criteria like the largest uncovered area \cite{ref130} or maximum uncovered targets \cite{ref131}.
+Cho et al.~\cite{ref145} propose a distributed node scheduling protocol, which can retain sensing coverage needed by applications and increase network lifetime via putting in sleep mode some redundant nodes. In this work, the effective sensing area (ESA) concept of a sensor node is used, which refers to the sensing area that is not overlapping with another sensor's sensing area. A sensor node can determine whether it will be active or turned off by computing its ESA. The suggested work permits sensor nodes to be in sleep mode opportunistically whilst fulfill the needed sensing coverage. The authors in~\cite{ref146}, define a maximum sensing coverage region problem (MSCR) in WSNs and then propose a distributed algorithm to solve it. The maximum observed area is fully covered by a minimum active sensors. In this work, the major property is to get rid of the redundant sensors in high-density WSNs and putting them in sleep mode, and choosing a smaller number of active sensors so as to ensure the full area is k-covered, and all events appearing in that area can be precisely and timely detected. This algorithm minimizes the total energy consumption and increases the network lifetime. The Distributed Adaptive Sleep Scheduling Algorithm (DASSA) \cite{ref127} does not require location information of sensors while maintaining connectivity and satisfying a user-defined coverage target. In DASSA, nodes use the residual energy levels and feedback from the sink for scheduling the activity of their neighbors. This feedback mechanism reduces the randomness in scheduling that would otherwise occur due to the absence of location information.
+A graph theoretical framework for connectivity-based area coverage with configurable coverage granularity was proposed~\cite{ref149}. A new coverage criterion and scheduling approach is proposed based on cycle partition. This method is capable of build a sparse coverage set in distributed way by means of only connectivity information. This work considers only the communication range of the sensor is smaller two times the sensing range of sensor. Shibo et al.~\cite{ref137} express that the area coverage problem as a minimum weight submodular set cover problem and propose a Distributed Truncated Greedy Algorithm (DTGA) to solve it. They take advantage from both temporal and spatial correlations between data sensed by different sensors, and leverage prediction, to improve the lifetime. The authors in \cite{ref160}, design an energy-efficient approach to area coverage problems by transforming the area coverage problem to the target coverage problem taking into account the intersection points among disks of sensors nodes or between disk of sensor nodes and boundaries. They proposed two mechanisms for the converted target coverage problems to produce cover sets covering the sensing
+field completely. Simulations results show that this approach can prolong the lifetime of the network compared with other works.
-In \cite{ref84}, Xu et al. have described an algorithm, called Geographical Adaptive Fidelity (GAF), which uses geographic location information to divide the area of interest into fixed square grids. Within each grid, it keeps only one node staying awake to take the responsibility of sensing and communication. Figure~\ref{gaf1} gives an example of fixed square grid in GAF.
+The works presented in~\cite{ref134,ref135,ref136} focus on coverage-aware, distributed energy-efficient, and distributed clustering methods respectively, which aim at extending the network lifetime, while the coverage is ensured.
+
+In this dissertation, we focused in more detail on two distributed coverage algorithms, GAF and DESK because we compared our proposed coverage optimization protocols with them during performance evaluation.
+
+
+\subsection{GAF}
+\label{ch2:sec:03:1}
+
+Xu et al. \cite{GAF} develop an algorithm, called Geographical Adaptive Fidelity (GAF). It uses geographic location information to divide the area of interest into fixed square grids. Within each grid, it keeps only one node staying awake to take the responsibility of sensing and communication. Each sensor node uses its GPS to associate itself with a point in the grid.Figure~\ref{gaf1} gives an example of fixed square grid in GAF.
\begin{figure}[h!]
\centering
-\includegraphics[scale=0.5]{Figures/ch2/GAF1.jpeg}
+\includegraphics[scale=0.4]{Figures/ch2/GAF1.eps}
\caption{ Example of fixed square grid in GAF.}
\label{gaf1}
\end{figure}
-The fixed grid is defined where, each two adjacent grids, for example, A and B in figure\ref{gaf1}, all the sensor nodes inside A can communicate with sensor nodes inside B and vice versa. Therefore, all the sensor nodes are equivalent from point of view the routing. The size of the fixed grid is based on the radio communication range $R_c$. It is supposed that the fixed grid is square with $r$ units on a side as shown in figure~\ref{gaf1}. The distance between the farthest two possible sensor nodes in two adjacent grid such as, B and C in figure~\ref{gaf1}, should not be greater than the radio communication range $R_c$ so as to satisfy the definition of fixed square grid. For instance, the sensor node \textbf{2} of grid B can communicates with the sensor node \textbf{5} of grid C. So,
+For two adjacent grids, (for example, A and B in figure~\ref{gaf1}) all sensor nodes inside A can communicate with sensor nodes inside B and vice versa. Therefore, all the sensor nodes are equivalent from the point of view the routing. The size of the fixed grid is based on the radio communication range $R_c$. It is supposed that the fixed grid is square with $r$ units on a side as shown in figure~\ref{gaf1}. The distance between the farthest two possible sensor nodes in two adjacent grids such as, B and C in figure~\ref{gaf1}, should not be greater than the radio communication range $R_c$. For instance, the sensor node \textbf{2} of grid B can communicate with the sensor node \textbf{5} of grid C So,
+
+
+\begin{eqnarray}
+Distance(2,5) \leq R_c
+\end{eqnarray}
\begin{eqnarray}
r^2 + \left(2r \right)^2 \leq R_c^2
r \leq \dfrac{R_c}{\sqrt{5}}
\end{eqnarray}
-The sensor nodes in GAF can be in one of three states: active, sleep, or discovery. Figure~\ref{gaf2} shows the state transition diagram. Each sensor node is initiated with discovery state. In discovery state, the radio of each sensor node is turned on after that the discovery messages are exchanged among the sensor nodes so as to discover the other nodes within the same grid. The discovery message consisted of four fields like, node id, grid id, estimated node active time (enat), and node state. The node use its location and grid size to determine the grid id.
+The sensor nodes in GAF can be in one of the three states: active, sleep, or discovery. Figure~\ref{gaf2} shows the state transition diagram. Each sensor node is initiated with discovery state.
+In discovery state, the radio of each sensor node is turned on. Thereafter, the discovery messages are exchanged among the sensor nodes within the same grid. The discovery message consists of four fields, node id, grid id, estimated node active time (enat), and node state. The node uses its location and grid size to determine the grid id.
\begin{figure}[h!]
\centering
-\includegraphics[scale=0.5]{Figures/ch2/GAF2.jpeg}
+\includegraphics[scale=0.4]{Figures/ch2/GAF2.eps}
\caption{ Example of fixed square grid in GAF.}
\label{gaf2}
\end{figure}
-The sensor node sets a timer to $T_d$ seconds after entering in discovery state. As soon as the timer fires, the sensor node broadcast its discovery message and enters in active state. The active sensor node sets a timeout value $T_a$ to define how long it can stay in active state. After $T_a$, the sensor node will return to the discovery state. Whilst, during its active state, it re-broadcasts its discovery message at intervals $T_d$ periodically. The sensor node with discovery or active state can change its state to sleep when it detects that some other equivalent node will handle routing inside the grid. The sensor nodes in the sleeping state wake up after a sleeping time $T_s$ and go back to the discovery state. In GAF, load balancing is performed by means of periodic election of the leader (i.e., the active node that handle the routing inside the fixed grid). A rank-based election algorithm has been used to elect the leader. It is based on the remaining energy of sensor nodes inside the fixed square grid so as to extend the network lifetime In proportionally with network density.
+The sensor node sets a timer to $T_d$ seconds after entering in the discovery state. As soon as the timer fires, the sensor node broadcasts its discovery message and enters the active state. The active sensor node sets a timeout value $T_a$ to define how long it can stay in the active state. After $T_a$, the sensor node will return to the discovery state. Whilst, during its active state, it re-broadcasts its discovery message at intervals $T_d$ periodically. The sensor node with discovery or active state can change its state to sleep when it detects that some other equivalent node will handle routing inside the grid. The sensor nodes in the sleeping state wake up after a sleeping time $T_s$ and go back to the discovery state. In GAF, load balancing is performed by means of periodic election of the leader (i.e., the active node that handle the routing inside the fixed grid). Inside each fixed square grid, sensor nodes collaborate with each other to play different roles. For example, nodes will elect
+one sensor node (based on the remaining energy of sensor nodes inside the fixed square grid) to stay awake for a certain period of time, and then the rest go to sleep. This sensor node is responsible for monitoring and reporting data to the base station on behalf of the nodes
+in the square grid.
+%A rank-based election algorithm has been used to elect the leader. It is based on the remaining energy of sensor nodes inside the fixed square grid so as to extend the network lifetime.
+
+\subsection{DESK}
+\label{ch2:sec:03:2}
+
+The authors in~\cite{DESK} design a novel distributed heuristic, called Distributed Energy-efficient Scheduling for k-coverage (DESK), which ensures that the energy consumption among the sensors is balanced and the lifetime maximized while the coverage requirement is satisfied. This heuristic works in rounds, requires only one-hop neighbor information, and each sensor decides its status (active or sleep) based on the perimeter coverage model from~\cite{ref133}.
+
+DESK is based on the result from \cite{ref133}. In \cite{ref133}, the whole area is k-covered if and only if the perimeters of all sensors are k-covered. The coverage level of perimeter of a sensor $s_i$ is determined by calculating the angle corresponding to the arc that each of its neighbors covers its perimeter. Figure~\ref{figp}~(a) illuminates such arcs whilst figure~\ref{figp}~(b) shows the angles corresponding with those arcs, which were posted into the range [0,2$ \pi $]. According to figure~\ref{figp}~(b), the coverage level of sensor $s_i$ can be calculated via traversing the range from 0 to 2$ \pi $.
+
+
+\begin{figure}[h!]
+ \centering
+ \begin{tabular}{@{}cr@{}}
+ \includegraphics[scale=0.8]{Figures/ch2/P22.jpg} & \raisebox{3cm}{(a)} \\
+ \includegraphics[scale=0.8]{Figures/ch2/P11.jpg} & \raisebox{3cm}{(b)}
+ \end{tabular}
+ \caption{Determining the perimeter-coverage of $s_i$’s perimeter.}
+ \label{figp}
+\end{figure}
-In~\cite{ref132}, the author have designed a novel distributed heuristic, called Distributed Energy-efficient Scheduling for k-coverage (DESK), which ensures that the energy consumption among the sensors is balanced and the lifetime maximized while the coverage requirement is maintained. This heuristic works in rounds, requires only one-hop neighbor information, and each sensor decides its status (active or sleep) based on the perimeter coverage model from~\cite{ref133}. Figure~\ref{desk} shows the DESK network time line.
\begin{figure}[h!]
\centering
-\includegraphics[scale=0.5]{Figures/ch2/DESK.jpeg}
+\includegraphics[scale=0.45]{Figures/ch2/DESK.eps}
\caption{ DESK network time line.}
\label{desk}
\end{figure}
-DESK works into rounds manner. The network lifetime divided into R rounds. Each round consists of two phases: decision phase and sensing phase. The length of round is dRound that means each sensor node executes this algorithm every dRound unit of time. The decision phase at the starting of each round should be taken within W unit of time, where $W<< dRound$ as shown in figure~\ref{desk}. All the sensor nodes should be temporarily wake up in the decision phase so as to decide its status. Every sensor node $s_i$ decides its status to be active or sleep after $w_i$ of waiting time. The waiting time $w_i$ is dynamic and it can be changed at any time based on the status of its sensor neighbors, the remaining energy of $s_i$, and its contribution $c_i$ in the coverage level of the network, where $c_i$ is defined as the number of the neighbors $n_i$ who need $s_i$ to be active. The waiting time has been defined as follow:
+Figure~\ref{desk} shows the DESK network time line. DESK works into rounds fashion. The network lifetime is divided into R rounds. Each round consists of two phases: decision phase and sensing phase. The length of round is dRound that means each sensor node executes this algorithm every dRound unit of time. The decision phase at the starting of each round should be taken within W unit of time, where $W<< dRound$ as shown in figure~\ref{desk}. All the sensor nodes should be temporarily awakened in the decision phase so as to decide its status. Every sensor node $s_i$ decides its status to be active or sleep after $w_i$ of waiting time. The waiting time $w_i$ is dynamic and it can be changed at any time based on the status of its sensor neighbors, the remaining energy $e_i$ of $s_i$, and its contribution $c_i$ in the coverage level of the network, where $c_i$ is defined as the number of the neighbors $n_i$ who need $s_i$ to be active. The waiting time is defined as follow
\begin{equation}
w_{i} = \left \{
\begin{array}{ll}
- \dfrac{\eta}{n_i^\alpha l(e_i,r_i)^\beta} * W + z & \mbox{If $e_i \geq e_threshold$} \\
+ \dfrac{\eta}{n_i^\alpha l(e_i,r_i)^\beta} * W + z & \mbox{If $e_i \geq e_{threshold}$} \\
W & \mbox{Otherwise.}\\
\end{array} \right.
%\label{eq12}
\notag
\end{equation}
-Where: $\alpha, \beta,$ and $\eta$ are constants, z is a random number between [0; d], where d is a time slot, to avoid the case where two sensors having the same $w_i$ to be active at the same time. $l(e_i, r_i)$ is the function computing the lifetime of sensor $s_i$ in terms of its current energy $e_i$ and its sensing range $r_i$.
+Where $\alpha, \beta,$ and $\eta$ are constant, z is a random number between [0; d], where d is a time slot, to avoid the case where two sensors having the same $w_i$ to be active at the same time. $l(e_i, r_i)$ is the function computing the lifetime of sensor $s_i$ in terms of its current remaining energy $e_i$ and its sensing range $r_i$.
+DESK uses two types of messages, mACTIVATE message by which a sensor informs others that it becomes active, and mASK2SLEEP by which a sensor suggests a neighbor to go to sleep due to its uselessness. The concept of uselessness or a redundant neighbor refers to one that does not contribute to the perimeter coverage of the considered sensor. This means that the segment of the perimeter of the considered sensor overlapping with that neighbor is already covered by active sensors.
-Typically, the algorithm works as follows: all the sensor nodes collect the information (coordinates, current residual energy, and sensing range) from the one-hop neighbors and store it in a list L (in the increasing order) by executing the perimeter coverage model. Each sensor node set its timer to $w_i$ and initially it is proposed that all of its neighbors need it to join the
-network. When the sensor node $s_j$ joins the network, it broadcasts a mACTIVATE message to inform all of its 1-hop neighbors about its status change. Its neighbors execute the perimeter coverage model to recalculate its coverage level. If it finds any neighbor u that is useless in covering its perimeter, i.e., the perimeter that u covers was covered by other active neighbors, it will send mASK2SLEEP message to that sensor. When the sensor node receives mASK2SLEEP message, it updates its counter $n_i$, contribution $c_i$ and recalculate waiting time $w_i$. It then
-check if its $n_i$ is decreased to 0 or not. If $n_i$ of a sensor node is 0 (i.e., it receives mASK2SLEEP message from all of its neighbors), then it will send message mGOSLEEP to all of its neighbors telling them that it is about to go to sleep, and set a timer $R_i$ for waking up in next round, and at last go to sleep. If the sensor node receives mGOSLEEP message, it removes the neighbor sending that message out of its list L.
+Typically, the algorithm works as follows. At the beginning of each round, no sensors are active. All sensors are in listening mode, i.e. all wait for the time to make a decision while still doing sensing job. All the sensor nodes collect the information (coordinates, current residual energy, and sensing range) from the one-hop neighbors. Each sensor stores this information into a list L in the increasing order of the angle $\alpha $ . Each sensor node set its timer to $w_i$ and initially it is proposed that all of its neighbors need it to join the network. When the sensor node $s_j$ joins the network, it broadcasts a mACTIVATE message to inform all of its 1-hop neighbors about its status change. Its neighbors execute the perimeter coverage model to recalculate its coverage level. If it finds any neighbor u that is useless in covering its perimeter, i.e., the perimeter that u covers is covered by other active neighbors, it will send mASK2SLEEP message to that sensor u. When the sensor node receives mASK2SLEEP message, it updates its counter $n_i$, contribution $c_i$ to coverage level, and recalculate waiting time $w_i$. It then
+check if its $n_i$ is decreased to 0 or not. If $n_i$ of a sensor node is 0 (i.e., it receives mASK2SLEEP message from all of its neighbors), then it will send message mGOSLEEP to all of its neighbors telling them that it is about to go to sleep, and set a timer $R_i$ for waking up in next round and at last go to sleep. If the sensor node receives mGOSLEEP message, it removes the neighbor sending that message out of its list L. All the sensors have to decide its status in the decision phase. After that, the active sensors perform the sensing task during the sensing phase.
+The period the average
+
\begin{table}
\caption{Main characteristics of some coverage approaches in previous literatures.}
\begin{tabular}{@{} cl*{13}c @{}}
& & \multicolumn{10}{c}{Characteristics} \\[2ex]
- & & \mcrot{1}{l}{50}{\footnotesize Distributed} & \mcrot{1}{l}{50}{\footnotesize Centralized} & \mcrot{1}{l}{50}{ \footnotesize Area coverage} & \mcrot{1}{l}{50}{\footnotesize Target coverage} & \mcrot{1}{l}{50}{\footnotesize k-coverage} & \mcrot{1}{l}{50}{\footnotesize Heterogeneous nodes}& \mcrot{1}{l}{50}{\footnotesize Homogeneous nodes} & \mcrot{1}{l}{50}{\footnotesize Disjoint sets} & \mcrot{1}{l}{50}{\footnotesize Non-Disjoint sets} & \mcrot{1}{l}{50}{\footnotesize SET K-COVER } & \mcrot{1}{l}{50}{\footnotesize Work in Rounds} & \mcrot{1}{l}{50}{\footnotesize Adjustable Radius} \\
+ \multicolumn{2}{c}{\footnotesize Coverage Approach} & \mcrot{1}{l}{50}{\footnotesize Distributed} & \mcrot{1}{l}{50}{\footnotesize Centralized} & \mcrot{1}{l}{50}{ \footnotesize Area coverage} & \mcrot{1}{l}{50}{\footnotesize Target coverage} & \mcrot{1}{l}{50}{\footnotesize k-coverage} & \mcrot{1}{l}{50}{\footnotesize Heterogeneous nodes}& \mcrot{1}{l}{50}{\footnotesize Homogeneous nodes} & \mcrot{1}{l}{50}{\footnotesize Disjoint sets} & \mcrot{1}{l}{50}{\footnotesize Non-Disjoint sets} & \mcrot{1}{l}{50}{\footnotesize SET K-COVER } & \mcrot{1}{l}{50}{\footnotesize Work in Rounds} & \mcrot{1}{l}{50}{\footnotesize Adjustable Radius} \\
\cmidrule[1pt]{2-14}
& \tiny K. Deschinkel et al. (2012)~\cite{ref122} & & \OK & & \OK & & & \OK & & \OK & \OK & & &\\
-\rot{\rlap{Some Proposed Coverage Protocols in previous literatures}}
-& \tiny A. Gallais et al. (2006)~\cite{ref123} & \OK & & \OK & & & \OK & \OK & & \OK & & \OK & \OK &\\
+
+& \tiny A. Gallais et al. (2008)~\cite{ref123} & \OK & & \OK & & & \OK & \OK & & \OK & & \OK & \OK &\\
& \tiny D. Tian and N. D. Georganas (2002)~\cite{ref124} & \OK & & \OK & & & & \OK & & \OK & & \OK & &\\
& \tiny S. K. Prasad and A. Dhawan (2007)~\cite{ref128} & \OK & & & \OK & & & \OK & & \OK & & \OK & &\\
-& \tiny S. Misra et al. (2011)~\cite{ref129} & \OK & & \OK & & & & \OK & & \OK & & & &\\
+& \tiny S. Misra et al. (2011)~\cite{ref97} & \OK & & \OK & & & & \OK & & \OK & & & &\\
& \tiny P. Berman et al. (2005)~\cite{ref130} & \OK & \OK & \OK & & & & \OK & & \OK & \OK & &\\
& \tiny J. Lu and T. Suda (2003)~\cite{ref131} & \OK & & \OK & & & & \OK & & \OK & & \OK & &\\
+
+
& \tiny J. Cho et al. (2007)~\cite{ref145} & \OK & & \OK & & & & \OK & & \OK & & & &\\
& \tiny V. T. Quang and T. Miyoshi (2008)~\cite{ref146} & \OK & & \OK & & \OK & & \OK & & \OK & & \OK & &\\
+%\rot{\rlap{Some Proposed Coverage Protocols in previous literatures}}
+
& \tiny D. Dong et al. (2012)~\cite{ref149} & \OK & & \OK & & & & \OK & & \OK & & \OK & &\\
& \tiny B. Wang et al. (2012)~\cite{ref134} & \OK & & \OK & & & & \OK & & \OK & & \OK & &\\
& \tiny L. Zhang et al. (2013)~\cite{ref136} & \OK & & \OK & & & \OK & \OK & & \OK & & \OK & &\\
-& \tiny S. He et al. (2012)~\cite{ref137} & \OK & \OK & \OK & & & & \OK & & \OK & & & &\\
+& \tiny S. He et al. (2012)~\cite{ref137} & \OK & \OK & \OK & & & & \OK & & \OK & & & &\\
-& \tiny Y. Xu et al. (2001)~\cite{ref84} & \OK & & \OK & & & & \OK & & \OK & & & &\\
+& \tiny Y. Xu et al. (2001)~\cite{GAF} & \OK & & \OK & & & & \OK & & \OK & & & &\\
-& \tiny C. Vu et al. (2006)~\cite{ref132} & \OK & & \OK & & \OK & & \OK & & \OK & & \OK & &\\
+& \tiny C. Vu et al. (2006)~\cite{DESK} & \OK & & \OK & & \OK & & \OK & & \OK & & \OK & &\\
+
+& \tiny X. Deng et al. (2012)~\cite{ref160} & \OK & & \OK & & & & \OK & & \OK & & & &\\
+
+& \tiny X. Deng et al. (2005)~\cite{ref133} & \OK & & \OK & & \OK & & \OK & & \OK & & & &\\
&\textbf{\textcolor{red}{ \tiny DiLCO Protocol (2014)}} & \textbf{\textcolor{red}{\OK}} & & \textbf{\textcolor{red}{\OK}} & & & \textbf{\textcolor{red}{\OK}} & \textbf{\textcolor{red}{\OK}} & & & &\textbf{\textcolor{red}{\OK}} & & \\
&\textbf{\textcolor{red}{ \tiny MuDiLCO Protocol (2014)}} & \textbf{\textcolor{red}{\OK}} & & \textbf{\textcolor{red}{\OK}} & & & \textbf{\textcolor{red}{\OK}} & \textbf{\textcolor{red}{\OK}} & & & \textbf{\textcolor{red}{\OK}} &\textbf{\textcolor{red}{\OK}} & & \\
-&\textbf{\textcolor{red}{ \tiny LiCO Protocol (2014)}} & \textbf{\textcolor{red}{\OK}} & & \textbf{\textcolor{red}{\OK}} & & & \textbf{\textcolor{red}{\OK}} & \textbf{\textcolor{red}{\OK}} & & & &\textbf{\textcolor{red}{\OK}} & & \\
+&\textbf{\textcolor{red}{ \tiny PeCO Protocol (2015)}} & \textbf{\textcolor{red}{\OK}} & & \textbf{\textcolor{red}{\OK}} & & & \textbf{\textcolor{red}{\OK}} & \textbf{\textcolor{red}{\OK}} & & & &\textbf{\textcolor{red}{\OK}} & & \\
\cmidrule[1pt]{2-14}
\end{tabular}
+
\section{Conclusion}
\label{ch2:sec:05}
-This chapter has been described some coverage problems proposed in the literature, and their assumptions and proposed solutions.
-The coverage problem has been considered an essential requirement for many applications in WSNs, because better
-coverage of an area of interest provides better sensing measurements of the physical phenomenon. So, there are many extensive researches have been focused on those problem. These researches have been aiming at designing mechanisms that efficiently manage or schedule the sensors after deployment, since sensor nodes have a limited battery life.
-In spite of many energy-efficient protocols for maintaining the coverage and improving the network lifetime in WSNs were proposed, non of them ensure the coverage for the sensing field with optimal minimum number of active sensor nodes, and for a long time as possible. In a full centralized algorithms, an optimal solutions can be given by using optimization approaches, but in the same time, a high energy is consumed for the execution time of the algorithm and the communications among the sensors in the sensing field, so, the full centralized approaches are not good candidate to use it especially in large WSNs. Whilst, a full distributed algorithms can not give optimal solutions because this algorithms use only local information of the neighboring sensors, but in the same time, the energy consumption during the communications and executing the algorithm is highly lower. Whatever the case, this would result in a shorter lifetime coverage in WSNs
+This chapter describes some coverage proposed problems in the literature, with their assumptions and proposed solutions.
+The coverage problem is considered as an essential requirement for many applications in WSNs because the better coverage of an area of interest provides better sensing measurements of the physical phenomenon. Therefore, many extensive researches have been focused on that problem. These researches aim at designing mechanisms that efficiently manage or schedule the sensors after deployment, since sensor nodes have a limited battery life.
+Many coverage algorithms for maintaining the coverage and improving the network lifetime in WSNs were proposed. On one hand, the full centralized coverage algorithms provide optimal or near optimal solution with low computation power but they deplete the battery power due to the communication overhead, as well as they are not scalable for large size networks. On the other hand, the distributed coverage algorithms provide a lower quality solution in comparison with centralized approaches and consume more power for computation but they are reliable, scalable, and provide low communication overhead in WSNs.
+%Whatever the case, this would result in a lower lifetime coverage in WSNs.
+As shown in table \ref{Table0:ch2}, each of the two coverage approaches has advantages and disadvantages. Therefore, each approach can be used based on the application requirements. We conclude from this chapter that it is desirable to introduce an hybrid approach that take into account the advantages of both centralized and distributed coverage approaches. This hybrid approaches can provide a good quality coverage and prolong the network lifetime.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+%Many coverage algorithms for maintaining the coverage and improving the network lifetime in WSNs were proposed. On one hand, the centralized coverage algorithms provide optimal or near optimal solution with low computation power but they deplete the battery power due to the communication overhead, as well as they are not scalable for large size networks. On the other hand, the distributed coverage algorithms provide a lower quality solution in comparison with centralized approaches and consume more power for computation but they are reliable, scalable, and provide low communication overhead on the WSNs.
+ %none of them ensure the coverage for the sensing field with optimal minimum number of active sensor nodes, and for a long time as possible. In full centralized algorithms, the optimal solutions can be given by using optimization approaches, but in the same time, a high energy is consumed for the execution time of the algorithm and the communications among the sensors in the sensing field. Therefore, the full centralized approaches are not a good candidate to be used especially in large WSNs. Whilst, a fully distributed algorithms can not give optimal solutions because these algorithms use only local information of the neighboring sensors, but in the same time, the energy consumption during the communications and executing the algorithm is highly lower. Whatever the case, this would result in a shorter lifetime coverage in WSNs
% Several centralized approaches have been demonstrated, where they are concentrated on modeling the coverage problem and provide the maximum cover set so as to extend the network lifetime. The proposed algorithms are executed in a central node and based on global information. The central node transmits the resulted schedule to other nodes in the network. Even if the centralized algorithms have been produced optimal or near optimal solutions, It seems to be difficult and unpractical to apply the full centralized approaches in WSNs. On the other hand, many distributed algorithms have been described. These approaches seem to be more realistic to be used in WSNs from point of view of designer, but they can not assure optimal or near optimal solutions so as to extend the network lifetime as long time as possible.
