%% CHAPTER 06 %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\chapter{Perimeter-based Coverage Optimization to Improve Lifetime in Wireless Sensor Networks}
+ \chapter{ Perimeter-based Coverage Optimization to Improve Lifetime in Wireless Sensor Networks}
\label{ch6}
-\section{Summary}
+\section{Introduction}
\label{ch6:sec:01}
-The most important problem in a Wireless Sensor Network (WSN) is to optimize the
-use of its limited energy provision so that it can fulfill its monitoring task
-as long as possible. Among known available approaches that can be used to
-improve power management, lifetime coverage optimization provides activity
-scheduling which ensures sensing coverage while minimizing the energy cost. In
-this paper, we propose such an approach called Perimeter-based Coverage Optimization
-protocol (PeCO). It is a hybrid of centralized and distributed methods: the
-region of interest is first subdivided into subregions and our protocol is then
-distributed among sensor nodes in each subregion.
-The novelty of our approach lies essentially in the formulation of a new
-mathematical optimization model based on the perimeter coverage level to schedule
-sensors' activities. Extensive simulation experiments have been performed using
-OMNeT++, the discrete event simulator, to demonstrate that PeCO can
-offer longer lifetime coverage for WSNs in comparison with some other protocols.
+%The continuous progress in Micro Electro-Mechanical Systems (MEMS) and wireless communication hardware has given rise to the opportunity to use large networks of tiny sensors, called Wireless Sensor Networks (WSN)~\cite{ref1,ref223}, to fulfill monitoring tasks. The features of a WSN made it suitable for a wide range of application in areas such as business, environment, health, industry, military, and so on~\cite{ref4}. These large number of applications have led to different design, management, and operational challenges in WSNs. The challenges become harder with considering into account the main limited capabilities of the sensor nodes such memory, processing, battery life, bandwidth, and short radio ranges. One important feature that distinguish the WSN from the other types of wireless networks is the provision of the sensing capability for the sensor nodes \cite{ref224}.
+
+%The sensor node consumes some energy both in performing the sensing task and in transmitting the sensed data to the sink. Therefore, it is required to activate as less number as possible of sensor nodes that can monitor the whole area of interest so as to reduce the data volume and extend the network lifetime. The sensing coverage is the most important task of the WSNs since sensing unit of the sensor node is responsible for measuring physical, chemical, or biological phenomena in the sensing field. The main challenge of any sensing coverage problem is to discover the redundant sensor node and turn off those nodes in WSN \cite{ref225}. The redundant sensor node is a node whose sensing area is covered by its active neighbors. In previous works, several approaches are used to find out the redundant node such as Voronoi diagram method, sponsored sector, crossing coverage, and perimeter coverage.
+
+In this chapter, we propose an approach called Perimeter-based Coverage Optimization
+protocol (PeCO).
+%The PeCO protocol merges between two energy efficient mechanisms, which are used the main advantages of the centralized and distributed approaches and avoids the most of their disadvantages. An energy-efficient activity scheduling mechanism based new optimization model is performed by each leader in the subregions.
+The framework is similar to the one described in chapter 4, section \ref{ch4:sec:02:03}, but in this approach, the optimization model is based on the perimeter coverage model in order to producing the optimal cover set of active sensors, which are taken the responsibility of sensing during the current period.
+
+
+The rest of the chapter is organized as follows. The next section is devoted to the PeCO protocol description and section~\ref{ch6:sec:03} focuses on the
+coverage model formulation which is used to schedule the activation of sensor
+nodes based on perimeter coverage model. Section~\ref{ch6:sec:04} presents simulations
+results and discusses the comparison with other approaches. Finally, concluding
+remarks are drawn in section~\ref{ch6:sec:05}.
+
+
\section{The PeCO Protocol Description}
\label{ch6:sec:02}
Every couple of intersection points is placed on the angular interval $[0,2\pi]$
in a counterclockwise manner, leading to a partitioning of the interval.
Figure~\ref{pcm2sensors}(a) illustrates the arcs for the nine neighbors of
-sensor $0$ and Figure~\ref{expcm} gives the position of the corresponding arcs
+sensor $0$ and Figure~\ref{expcm} gives the position of the corresponding arcs
in the interval $[0,2\pi]$. More precisely, we can see that the points are
ordered according to the measures of the angles defined by their respective
positions. The intersection points are then visited one after another, starting
\end{figure}
-
-
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% This section deleted %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\iffalse
\subsection{The Main Idea}
\label{ch6:sec:02:02}
\label{fig2}
\end{figure}
-
-
+\fi
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection{PeCO Protocol Algorithm}
\label{ch6:sec:02:03}
\noindent The pseudocode implementing the protocol on a node is given below.
More precisely, Algorithm~\ref{alg:PeCO} gives a brief description of the
-protocol applied by a sensor node $s_k$ where $k$ is the node index in the WSN.
+protocol applied by a sensor node $s_j$ where $j$ is the node index in the WSN.
\begin{algorithm}[h!]
% \KwIn{all the parameters related to information exchange}
%\emph{Initialize the sensor node and determine it's position and subregion} \;
\If{ $RE_k \geq E_{th}$ }{
- \emph{$s_k.status$ = COMMUNICATION}\;
+ \emph{$s_j.status$ = COMMUNICATION}\;
\emph{Send $INFO()$ packet to other nodes in subregion}\;
\emph{Wait $INFO()$ packet from other nodes in subregion}\;
- \emph{Update K.CurrentSize}\;
+ \emph{Update A.CurrentSize}\;
\emph{LeaderID = Leader election}\;
- \If{$ s_k.ID = LeaderID $}{
- \emph{$s_k.status$ = COMPUTATION}\;
+ \If{$ s_j.ID = LeaderID $}{
+ \emph{$s_j.status$ = COMPUTATION}\;
- \If{$ s_k.ID $ is Not previously selected as a Leader }{
+ \If{$ s_j.ID $ is Not previously selected as a Leader }{
\emph{ Execute the perimeter coverage model}\;
% \emph{ Determine the segment points using perimeter coverage model}\;
}
- \If{$ (s_k.ID $ is the same Previous Leader) And (K.CurrentSize = K.PreviousSize)}{
+ \If{$ (s_j.ID $ is the same Previous Leader) And (A.CurrentSize = A.PreviousSize)}{
\emph{ Use the same previous cover set for current sensing stage}\;
}
\Else{
\emph{Update $a^j_{ik}$; prepare data for IP~Algorithm}\;
- \emph{$\left\{\left(X_{1},\dots,X_{l},\dots,X_{K}\right)\right\}$ = Execute Integer Program Algorithm($K$)}\;
- \emph{K.PreviousSize = K.CurrentSize}\;
+ \emph{$\left\{\left(X_{1},\dots,X_{k},\dots,X_{A}\right)\right\}$ = Execute Integer Program Algorithm($A$)}\;
+ \emph{A.PreviousSize = A.CurrentSize}\;
}
- \emph{$s_k.status$ = COMMUNICATION}\;
- \emph{Send $ActiveSleep()$ to each node $l$ in subregion}\;
- \emph{Update $RE_k $}\;
+ \emph{$s_j.status$ = COMMUNICATION}\;
+ \emph{Send $ActiveSleep()$ to each node $k$ in subregion}\;
+ \emph{Update $RE_j $}\;
}
\Else{
- \emph{$s_k.status$ = LISTENING}\;
+ \emph{$s_j.status$ = LISTENING}\;
\emph{Wait $ActiveSleep()$ packet from the Leader}\;
- \emph{Update $RE_k $}\;
+ \emph{Update $RE_j $}\;
}
}
- \Else { Exclude $s_k$ from entering in the current sensing stage}
-\caption{PeCO($s_k$)}
+ \Else { Exclude $s_j$ from entering in the current sensing stage}
+\caption{PeCO($s_j$)}
\label{alg:PeCO}
\end{algorithm}
-In this algorithm, K.CurrentSize and K.PreviousSize respectively represent the
+In this algorithm, A.CurrentSize and A.PreviousSize respectively represent the
current number and the previous number of living nodes in the subnetwork of the
-subregion. Initially, the sensor node checks its remaining energy $RE_k$, which
+subregion. Initially, the sensor node checks its remaining energy $RE_j$, which
must be greater than a threshold $E_{th}$ in order to participate in the current
period. Each sensor node determines its position and its subregion using an
embedded GPS or a location discovery algorithm. After that, all the sensors
First, we have the following sets:
\begin{itemize}
-\item $S$ represents the set of WSN sensor nodes;
-\item $A \subseteq S $ is the subset of alive sensors;
+\item $J$ represents the set of WSN sensor nodes;
+\item $A \subseteq J $ is the subset of alive sensors;
\item $I_j$ designates the set of coverage intervals (CI) obtained for
sensor~$j$.
\end{itemize}
\begin{equation} %\label{eq:ip2r}
\left \{
\begin{array}{ll}
-\min \sum_{j \in S} \sum_{i \in I_j} (\alpha^j_i ~ M^j_i + \beta^j_i ~ V^j_i )&\\
+\min \sum_{j \in J} \sum_{i \in I_j} (\alpha^j_i ~ M^j_i + \beta^j_i ~ V^j_i )&\\
\textrm{subject to :}&\\
-\sum_{k \in A} ( a^j_{ik} ~ X_{k}) + M^j_i \geq l \quad \forall i \in I_j, \forall j \in S\\
+\sum_{k \in A} ( a^j_{ik} ~ X_{k}) + M^j_i \geq l \quad \forall i \in I_j, \forall j \in J\\
%\label{c1}
-\sum_{k \in A} ( a^j_{ik} ~ X_{k}) - V^j_i \leq l \quad \forall i \in I_j, \forall j \in S\\
+\sum_{k \in A} ( a^j_{ik} ~ X_{k}) - V^j_i \leq l \quad \forall i \in I_j, \forall j \in J\\
% \label{c2}
% \Theta_{p}\in \mathbb{N}, &\forall p \in P\\
% U_{p} \in \{0,1\}, &\forall p \in P\\
different node densities going from 100 to 300~nodes were performed considering
each time 25~randomly generated networks. The nodes are deployed on a field of
interest of $(50 \times 25)~m^2 $ in such a way that they cover the field with a
-high coverage ratio. Each node has an initial energy level, in Joules, which is
-randomly drawn in the interval $[500-700]$. If its energy provision reaches a
-value below the threshold $E_{th}=36$~Joules, the minimum energy needed for a
-node to stay active during one period, it will no more participate in the
-coverage task. This value corresponds to the energy needed by the sensing phase,
-obtained by multiplying the energy consumed in active state (9.72 mW) with the
-time in seconds for one period (3600 seconds), and adding the energy for the
-pre-sensing phases. According to the interval of initial energy, a sensor may
-be active during at most 20 periods.
+high coverage ratio.
+%Each node has an initial energy level, in Joules, which is randomly drawn in the interval $[500-700]$. If its energy provision reaches a value below the threshold $E_{th}=36$~Joules, the minimum energy needed for a node to stay active during one period, it will no more participate in the coverage task. This value corresponds to the energy needed by the sensing phase, obtained by multiplying the energy consumed in active state (9.72 mW) with the time in seconds for one period (3600 seconds), and adding the energy for the pre-sensing phases. According to the interval of initial energy, a sensor may be active during at most 20 periods.
The values of $\alpha^j_i$ and $\beta^j_i$ have been chosen to ensure a good
network coverage and a longer WSN lifetime. We have given a higher priority to
-the undercoverage (by setting the $\alpha^j_i$ with a larger value than
+the undercoverage (by setting the $\alpha^j_i$ with a larger value than
$\beta^j_i$) so as to prevent the non-coverage for the interval~$i$ of the
sensor~$j$. On the other hand, we have assigned to
-$\beta^j_i$ a value which is slightly lower so as to minimize the number of active sensor nodes which contribute
-in covering the interval.
+$\beta^j_i$ a value which is slightly lower so as to minimize the number of active sensor nodes which contribute in covering the interval.
-We applied the performance metrics, which are described in chapter 4, section \ref{ch4:sec:04:04} in order to evaluate the efficiency of our approach. We used the modeling language and the optimization solver which are mentioned in chapter 4, section \ref{ch4:sec:04:02}. In addition, we employed an energy consumption model, which is presented in chapter 4, section \ref{ch4:sec:04:03}.
+With the performance metrics, described in chapter 4, section \ref{ch4:sec:04:04}, we evaluate the efficiency of our approach. We use the modeling language and the optimization solver which are mentioned in chapter 4, section \ref{ch4:sec:04:02}. In addition, we use the same energy consumption model, presented in chapter 4, section \ref{ch4:sec:04:03}.
\subsection{Simulation Results}
difference is more obvious in Figure~\ref{fig3LT}(b) than in
Figure~\ref{fig3LT}(a) because the gain induced by our protocols increases with
time, and the lifetime with a coverage of 50\% is far longer than with
-95\%.
+95\%.
-\begin{figure}[h!]
+\begin{figure} [p]
\centering
\begin{tabular}{@{}cr@{}}
\includegraphics[scale=0.8]{Figures/ch6/R/LT95.eps} & \raisebox{4cm}{(a)} \\
size. DiLCO is better for coverage ratios near 100\%, but in that case PeCO is
not ineffective for the smallest network sizes.
-\begin{figure}[h!]
+\begin{figure} [p]
\centering \includegraphics[scale=0.8]{Figures/ch6/R/LTa.eps}
\caption{Network lifetime for different coverage ratios.}
\label{figLTALL}
-\end{figure}
+\end{figure}
-
-\section{Conclusion}
-\label{ch6:sec:04}
+ %\FloatBarrier
+\section{Conclusion}
+\label{ch6:sec:05}
In this chapter, we have studied the problem of Perimeter-based Coverage Optimization in
WSNs. We have designed a new protocol, called Perimeter-based Coverage Optimization, which
