-The flowcharts given in Fig.~\ref{fig:sch} summarize our steganography scheme denoted by
-STABYLO, which stands for STeganography with cAnny, Bbs, binarY embedding at LOw cost.
-What follows are successively details of the inner steps and flows inside
-both the embedding stage (Fig.~\ref{fig:sch:emb})
-and the extraction one (Fig.~\ref{fig:sch:ext}).
+This section first presents the embedding scheme through its
+four main steps: the data encryption (Sect.~\ref{sub:bbs}),
+the cover pixel selection (Sect.~\ref{sub:edge}),
+the adaptive payload considerations (Sect.~\ref{sub:adaptive}),
+and how the distortion has been minimized (Sect.~\ref{sub:stc}).
+The message extraction is then presented (Sect.~\ref{sub:extract}) while a running example ends this section (Sect.~\ref{sub:xpl}).
-\begin{figure*}[t]
+The flowcharts given in Fig.~\ref{fig:sch}
+summarize our steganography scheme denoted by
+STABYLO, which stands for STe\-ga\-no\-gra\-phy with
+Adaptive, Bbs, binarY embedding at LOw cost.
+What follows are successively some details of the inner steps and the flows both inside
+ the embedding stage (Fig.~\ref{fig:sch:emb})
+and inside the extraction one (Fig.~\ref{fig:sch:ext}).
+Let us first focus on the data embedding.
+
+\begin{figure*}%[t]
\begin{center}
- \subfloat[Data Embedding.]{
- \begin{minipage}{0.49\textwidth}
+ \subfloat[Data Embedding]{
+ \begin{minipage}{0.4\textwidth}
\begin{center}
- %\includegraphics[width=5cm]{emb.pdf}
- \includegraphics[width=5cm]{emb.ps}
+ %\includegraphics[scale=0.45]{emb}
+ \includegraphics[scale=0.4]{emb}
\end{center}
\end{minipage}
\label{fig:sch:emb}
- }%\hfill
- \subfloat[Data Extraction.]{
+ }
+\hfill
+ \subfloat[Data Extraction]{
\begin{minipage}{0.49\textwidth}
\begin{center}
- %\includegraphics[width=5cm]{rec.pdf}
- \includegraphics[width=5cm]{rec.ps}
+ \includegraphics[scale=0.4]{dec}
\end{center}
\end{minipage}
\label{fig:sch:ext}
}%\hfill
\end{center}
- \caption{The STABYLO Scheme.}
+ \caption{The STABYLO scheme}
\label{fig:sch}
\end{figure*}
-\subsection{Data Embedding}
-This section describes the main three steps of the STABYLO data embedding
-scheme.
-\subsubsection{Edge-Based Image Steganography}
+
+\subsection{Security considerations}\label{sub:bbs}
+Among the methods of message encryption/decryption
+(see~\cite{DBLP:journals/ejisec/FontaineG07} for a survey)
+we implement the asymmetric
+Blum-Goldwasser cryptosystem~\cite{Blum:1985:EPP:19478.19501}
+that is based on the Blum Blum Shub~\cite{DBLP:conf/crypto/ShubBB82}
+pseudorandom number generator (PRNG) and the
+XOR binary function.
+The main justification of this choice
+is that it has been proven~\cite{DBLP:conf/crypto/ShubBB82} that this PRNG
+has the property of cryptographical security, \textit{i.e.},
+for any sequence of $L$ output bits $x_i$, $x_{i+1}$, \ldots, $x_{i+L-1}$,
+there is no algorithm, whose time complexity is polynomial in $L$, and
+which allows to find $x_{i-1}$ or $x_{i+L}$ with a probability greater
+than $1/2$.
+Equivalent formulations of such a property can
+be found. They all lead to the fact that,
+even if the encrypted message is extracted,
+it is impossible to retrieve the original one in
+polynomial time.
+
+Starting thus with a key $k$ and the message \textit{mess} to hide,
+this step computes a message $m$, which is the encrypted version of \textit{mess}.
+
+
+\subsection{Edge-based image steganography}\label{sub:edge}
-The edge-based image steganography schemes
+The edge-based image
+steganography schemes
already presented \cite{Luo:2010:EAI:1824719.1824720,DBLP:journals/eswa/ChenCL10} differ
in how carefully they select edge pixels, and
how they modify them.
edges in images (whose noise has been initially reduced).
They can be separated in two categories: first and second order detection
methods on the one hand, and fuzzy detectors on the other hand~\cite{KF11}.
-In first order methods like Sobel,
+In first order methods like Sobel, Canny~\cite{Canny:1986:CAE:11274.11275}, and so on,
a first-order derivative (gradient magnitude, etc.) is computed
to search for local maxima, whereas in second order ones, zero crossings in a second-order derivative, like the Laplacian computed from the image,
are searched in order to find edges.
-As for as fuzzy edge methods are concerned, they are obviously based on fuzzy logic to highlight
-edges.
-Canny filters, on their parts, are an old family of algorithms still remaining a state-of-the-art edge detector. They can be well approximated by first-order derivatives of Gaussians.
-%%
-%
-%Of course, all the algorithms have advantages and drawbacks that depend on the
-%motivations behind that edges detection. Unfortunately unless testing most of the
-%algorithms, which would require many times, it is quite difficult to have an
-%accurate idea on what would produce such algorithm compared to another.
-%That is
-%why we have chosen
-As the Canny algorithm is well known and studied, fast, and implementable
-on many kinds of architectures like FPGAs, smartphones, desktop machines, and
+As far as fuzzy edge methods are concerned, they are obviously based on fuzzy logic to highlight edges.
+
+Canny filters, on their parts, are an old family of algorithms still remaining a state of the art edge detector. They can be well-approximated by first-order derivatives of Gaussians.
+As the Canny algorithm is fast, well known, has been studied in depth, and is implementable
+on many kinds of architectures like FPGAs, smart phones, desktop machines, and
GPUs, we have chosen this edge detector for illustrative purpose.
-Of course, other detectors like the fuzzy edge methods
-deserve much further attention, which is why we intend
-to investigate systematically all of these detectors in our next work.
-%we do not pretend that this is the best solution.
-In order to be able to compute the same set of edge pixels, we suggest to consider all the bits of the image (cover or stego) without the LSB. Thus, with an 8 bits image, only the 7 first bits are considered. In our flowcharts, this is represented by ``LSB(7 bits Edge Detection)''.
-% First of all, let us discuss about compexity of edge detetction methods.
-% Let then $M$ and $N$ be the dimension of the original image.
-% According to~\cite{Hu:2007:HPE:1282866.1282944},
-% even if the fuzzy logic based edge detection methods~\cite{Tyan1993}
-% have promising results, its complexity is in $C_3 \times O(M \times N)$
-% whereas the complexity on the Canny method~\cite{Canny:1986:CAE:11274.11275}
-% is in $C_1 \times O(M \times N)$ where $C_1 < C_3$.
-% \JFC{Verifier ceci...}
-% In experiments detailled in this article, the Canny method has been retained
-% but the whole approach can be updated to consider
-% the fuzzy logic edge detector.
-Next, following~\cite{Luo:2010:EAI:1824719.1824720}, our scheme automatically
-modifies the Canny algorithm
-parameters to get a sufficiently large set of edge bits: this
-one is practically enlarged until its size is at least twice as large
-as the size of the embedded message.
+
+
+
+This edge detection is applied on a filtered version of the image given
+as input.
+More precisely, only $b$ most significant bits are concerned by this step,
+where the parameter $b$ is practically set with $6$ or $7$.
+Notice that only the 2 LSBs of pixels in the set of edges
+are returned if $b$ is 6, and the LSB of pixels if $b$ is 7.
+If set with the same value $b$, the edge detection returns thus the same
+set of pixels for both the cover and the stego image.
+Moreover, to provide edge gradient value,
+the Canny algorithm computes derivatives
+in the two directions with respect to a mask of size $T$.
+The higher $T$ is, the coarse the approach is. Practically,
+$T$ is set with $3$, $5$, or $7$.
+In our flowcharts, this step is represented by ``Edge Detection(b, T, X)''.
+
+
+Let $x$ be the sequence of these bits.
+The next section presents how to adapt our scheme
+with respect to the size
+of the message $m$ to embed and the size of the cover $x$.
+
+
+
+
+
+
+
+
+\subsection{Adaptive embedding rate}\label{sub:adaptive}
+Two strategies have been developed in our approach,
+depending on the embedding rate that is either \emph{Adaptive} or \emph{Fixed}.
+In the former the embedding rate depends on the number of edge pixels.
+The higher it is, the larger the message length that can be inserted is.
+Practically, a set of edge pixels is computed according to the
+Canny algorithm with parameters $b=7$ and $T=3$.
+The message length is thus defined to be less than
+half of this set cardinality.
+If $x$ is too short for $m$, the message is split into sufficient parts
+and a new cover image should be used for the remaining part of the message.
+
+In the latter, the embedding rate is defined as a percentage between the
+number of modified pixels and the length of the bit message.
+This is the classical approach adopted in steganography.
+Practically, the Canny algorithm generates
+a set of edge pixels related to increasing values of $T$ and
+until its cardinality
+is sufficient. Even in this situation, our scheme is adapting
+its algorithm to meet all the user's requirements.
+
+
+Once the map of possibly modified pixels is computed,
+two methods may further be applied to extract bits that
+are really modified.
+The first one randomly chooses the subset of pixels to modify by
+applying the BBS PRNG again. This method is further denoted as a \emph{sample}.
+Once this set is selected, a classical LSB replacement is applied to embed the
+stego content.
+The second method considers the last significant bits of all the pixels
+inside the previous map. It next directly applies the STC
+algorithm~\cite{DBLP:journals/tifs/FillerJF11}.
+It is further referred to as \emph{STC} and is detailed in the next section.
+
+
+
+
+
+
+
+
+\subsection{Minimizing distortion with Syndrome-Trellis Codes}\label{sub:stc}
+\input{stc}
+
+
% Edge Based Image Steganography schemes
% already studied~\cite{Luo:2010:EAI:1824719.1824720,DBLP:journals/eswa/ChenCL10,DBLP:conf/ih/PevnyFB10} differ
% than the size of embedded message.
-\subsubsection{Security Considerations}
-Among methods of message encryption/decryption
-(see~\cite{DBLP:journals/ejisec/FontaineG07} for a survey)
-we implement the Blum-Goldwasser cryptosystem~\cite{Blum:1985:EPP:19478.19501}
-that is based on the Blum Blum Shub~\cite{DBLP:conf/crypto/ShubBB82} pseudorandom number generator (PRNG)
-for security reasons.
-It has been indeed proven~\cite{DBLP:conf/crypto/ShubBB82} that this PRNG
-has the property of cryptographical security, \textit{i.e.},
-for any sequence of $L$ output bits $x_i$, $x_{i+1}$, \ldots, $x_{i+L-1}$,
-there is no algorithm, whose time complexity is polynomial in $L$, and
-which allows to find $x_{i-1}$ and $x_{i+L}$ with a probability greater
-than $1/2$.
-Equivalent formulations of such a property can
-be found. They all lead to the fact that,
-even if the encrypted message is extracted,
-it is impossible to retrieve the original one in
-polynomial time.
-
%%RAPH: paragraphe en double :-)
-%% \subsubsection{Security Considerations}
-%% Among methods of message encryption/decryption
-%% (see~\cite{DBLP:journals/ejisec/FontaineG07} for a survey)
-%% we implement the Blum-Goldwasser cryptosystem~\cite{Blum:1985:EPP:19478.19501}
-%% which is based on the Blum Blum Shub~\cite{DBLP:conf/crypto/ShubBB82} Pseudo Random Number Generator (PRNG)
-%% for security reasons.
-%% It has been indeed proven~\cite{DBLP:conf/crypto/ShubBB82} that this PRNG
-%% has the cryptographically security property, \textit{i.e.},
-%% for any sequence $L$ of output bits $x_i$, $x_{i+1}$, \ldots, $x_{i+L-1}$,
-%% there is no algorithm, whose time complexity is polynomial in $L$, and
-%% which allows to find $x_{i-1}$ and $x_{i+L}$ with a probability greater
-%% than $1/2$.
-%% Thus, even if the encrypted message would be extracted,
-%% it would thus be not possible to retrieve the original one in a
-%% polynomial time.
+\subsection{Data extraction}\label{sub:extract}
+The message extraction summarized in Fig.~\ref{fig:sch:ext}
+follows the data embedding approach
+since there exists a reverse function for all its steps.
+More precisely, let $b$ be the most significant bits and
+$T$ be the size of the canny mask, both be given as a key.
+Thus, the same edge detection is applied on a stego content $Y$ to
+produce the sequence $y$ of LSBs.
+If the STC approach has been selected in embedding, the STC reverse
+algorithm is directly executed to retrieve the encrypted message.
+This inverse function takes the $\hat{H}$ matrix as a parameter.
+Otherwise, \textit{i.e.}, if the \emph{sample} strategy is retained,
+the same random bit selection than in the embedding step
+is executed with the same seed, given as a key.
+Finally, the Blum-Goldwasser decryption function is executed and the original
+message is extracted.
+
+
+\subsection{Running example}\label{sub:xpl}
+In this example, the cover image is Lena,
+which is a $512\times512$ image with 256 grayscale levels.
+The message is the poem Ulalume (E. A. Poe), which is constituted by 104 lines, 667
+words, and 3,754 characters, \textit{i.e.}, 30,032 bits.
+Lena and the first verses are given in Fig.~\ref{fig:lena}.
+
+\begin{figure}
+\begin{center}
+\begin{minipage}{0.49\linewidth}
+\begin{center}
+\includegraphics[scale=0.20]{lena512}
+\end{center}
+\end{minipage}
+\begin{minipage}{0.49\linewidth}
+\begin{flushleft}
+\begin{scriptsize}
+The skies they were ashen and sober;\linebreak
+$\qquad$ The leaves they were crisped and sere—\linebreak
+$\qquad$ The leaves they were withering and sere;\linebreak
+It was night in the lonesome October\linebreak
+$\qquad$ Of my most immemorial year;\linebreak
+It was hard by the dim lake of Auber,\linebreak
+$\qquad$ In the misty mid region of Weir—\linebreak
+It was down by the dank tarn of Auber,\linebreak
+$\qquad$ In the ghoul-haunted woodland of Weir.
+\end{scriptsize}
+\end{flushleft}
+\end{minipage}
+\end{center}
+\caption{Cover and message examples} \label{fig:lena}
+\end{figure}
+
+The edge detection returns 18,641 and 18,455 pixels when $b$ is
+respectively 7 and 6 and $T=3$.
+These edges are represented in Figure~\ref{fig:edge}.
+When $b$ is 7, it remains one bit per pixel to build the cover vector.
+This configuration leads to a cover vector of size 18,641 if b is 7
+and 36,910 if $b$ is 6.
+
+\begin{figure}[t]
+ \begin{center}
+ \subfloat[$b$ is 7.]{
+ \begin{minipage}{0.49\linewidth}
+ \begin{center}
+ %\includegraphics[width=5cm]{emb.pdf}
+ \includegraphics[scale=0.20]{edge7}
+ \end{center}
+ \end{minipage}
+ %\label{fig:sch:emb}
+ }%\hfill
+ \subfloat[$b$ is 6.]{
+ \begin{minipage}{0.49\linewidth}
+ \begin{center}
+ %\includegraphics[width=5cm]{rec.pdf}
+ \includegraphics[scale=0.20]{edge6}
+ \end{center}
+ \end{minipage}
+ %\label{fig:sch:ext}
+ }%\hfill
+ \end{center}
+ \caption{Edge detection wrt $b$ with $T=3$}
+ \label{fig:edge}
+\end{figure}
+
+
+
+The STC algorithm is optimized when the rate between message length and
+cover vector length is lower than 1/2.
+So, only 9,320 bits are available for embedding
+in the configuration where $b$ is 7.
+
+When $b$ is 6, we could have considered 18,455 bits for the message.
+However, first experiments have shown that modifying this number of bits is too
+easily detectable.
+So, we choose to modify the same amount of bits (9,320) and keep STC optimizing
+which bits to change among the 36,910 ones.
+
+In the two cases, about the third part of the poem is hidden into the cover.
+Results with {Adaptive} and {STC} strategies are presented in
+Fig.~\ref{fig:lenastego}.
+
+\begin{figure}[t]
+ \begin{center}
+ \subfloat[$b$ is 7.]{
+ \begin{minipage}{0.49\linewidth}
+ \begin{center}
+ %\includegraphics[width=5cm]{emb.pdf}
+ \includegraphics[scale=0.20]{lena7}
+ \end{center}
+ \end{minipage}
+ %\label{fig:sch:emb}
+ }%\hfill
+ \subfloat[$b$ is 6.]{
+ \begin{minipage}{0.49\linewidth}
+ \begin{center}
+ %\includegraphics[width=5cm]{rec.pdf}
+ \includegraphics[scale=0.20]{lena6}
+ \end{center}
+ \end{minipage}
+ %\label{fig:sch:ext}
+ }%\hfill
+ \end{center}
+ \caption{Stego images wrt $b$}
+ \label{fig:lenastego}
+\end{figure}
+
+
+Finally, differences between the original cover and the stego images
+are presented in Fig.~\ref{fig:lenadiff}. For each pair of pixel $X_{ij}$ and $Y_{ij}$ ($X$ and $Y$ being the cover and the stego content respectively),
+the pixel value $V_{ij}$ of the difference is defined with the following map
+$$
+V_{ij}= \left\{
+\begin{array}{rcl}
+0 & \textrm{if} & X_{ij} = Y_{ij} \\
+75 & \textrm{if} & \vert X_{ij} - Y_{ij} \vert = 1 \\
+150 & \textrm{if} & \vert X_{ij} - Y_{ij} \vert = 2 \\
+225 & \textrm{if} & \vert X_{ij} - Y_{ij} \vert = 3
+\end{array}
+\right..
+$$
+This function allows to emphasize differences between contents.
+Notice that since $b$ is 7 in Fig.~\ref{fig:diff7}, the embedding is binary
+and this image only contains 0 and 75 values.
+Similarly, if $b$ is 6 as in Fig.~\ref{fig:diff6}, the embedding is ternary
+and the image contains all the values in $\{0,75,150,225\}$.
+
+
+
+\begin{figure}[t]
+ \begin{center}
+ \subfloat[$b$ is 7.]{
+ \begin{minipage}{0.49\linewidth}
+ \begin{center}
+ %\includegraphics[width=5cm]{emb.pdf}
+ \includegraphics[scale=0.20]{diff7}
+ \end{center}
+ \end{minipage}
+ \label{fig:diff7}
+ }%\hfill
+ \subfloat[$b$ is 6.]{
+ \begin{minipage}{0.49\linewidth}
+ \begin{center}
+ %\includegraphics[width=5cm]{rec.pdf}
+ \includegraphics[scale=0.20]{diff6}
+ \end{center}
+ \end{minipage}
+ \label{fig:diff6}
+ }%\hfill
+ \end{center}
+ \caption{Differences with Lena's cover wrt $b$}
+ \label{fig:lenadiff}
+\end{figure}
-\subsubsection{Minimizing Distortion with Syndrome-Treillis Codes}
-\input{stc}
-\subsection{Data Extraction}
-The message extraction summarized in Fig.~\ref{fig:sch:ext} follows data embedding
-since there exists a reverse function for all its steps.
-First of all, the same edge detection is applied (on the 7 first bits) to
-get the set of LSBs,
-which is sufficiently large with respect to the message size given as a key.
-Then the STC reverse algorithm is applied to retrieve the encrypted message.
-Finally, the Blum-Goldwasser decryption function is executed and the original
-message is extracted.
