-The field of Genome annotation pays a lot of attentions where the ability to collect and analysis genomical data can provide strong indicator for the study of life\cite{Eisen2007}. Four of genome annotation centers, (such as, \textit{NCBI\cite{Sayers01012011}, Dogma \cite{RDogma}, cpBase \cite{de2002comparative}, CpGAVAS \cite{liu2012cpgavas}, and CEGMA\cite{parra2007cegma}}), present various types of annotations tools (i.e cost-effective sequencing methods\cite{Bakke2009}) on different annotation levels. Generally, one of three methods of gene finding in annotated genome can be categorized using these centers: \textit{alignment-based, composition based, or combination of both\cite{parra2007cegma}}. The alignment-based method is used when we try to predict a coding gene (i.e. genes that produce proteins) by aligning DNA sequence of gene to the protein of cDNA sequence of homology\cite{parra2007cegma}. This approache also is used in GeneWise\cite{birney2004genewise}. Composition-based mothod (known as \textit{ab initio}) is based on a probabilistic model of gene structure to find genes and/or new genes according to the probability gene value (GeneID\cite{parra2000geneid}). In this section, we will consider a new method of finding core genes from large amount of chloroplast genomes, as a solution of the problem resulting from the method stated in section two. This method is based on extracting gene features. A general overview of the system is illustrated in Figure \ref{Fig1}.\\
+The field of genome annotation pays a lot of attentions where the ability to collect and analysis genomical data can provide strong indicators for the study of life\cite{Eisen2007}. Four of genome annotation centers (such as, \textit{NCBI\cite{Sayers01012011}, Dogma \cite{RDogma}, cpBase \cite{de2002comparative}, CpGAVAS \cite{liu2012cpgavas}, and CEGMA\cite{parra2007cegma}}) present various types of annotation tools (\emph{i.e.} cost-effective sequencing methods\cite{Bakke2009}) on different annotation levels. Generally, previous studies used one of three methods for gene finding in annotated genome using these centers: \textit{alignment-based, composition based, or combination of both\cite{parra2007cegma}}. The alignment-based method is used when we try to predict a coding gene (\emph{i.e.}. genes that produce proteins) by aligning DNA sequence of gene to the protein of cDNA sequence of homology\cite{parra2007cegma}. This approach also is used in GeneWise\cite{birney2004genewise}. Composition-based method (known as \textit{ab initio}) is based on a probabilistic model of gene structure to find genes according to the gene value probability (GeneID\cite{parra2000geneid}). In this section, we consider a new method of finding core genes from large amount of chloroplast genomes, as a solution of the problem resulting from the method stated in section two. This method is based on extracting gene features. A general overview of the system is illustrated in Figure \ref{Fig1}.\\
\begin{figure}[H]
\centering
\caption{A general overview of the system}\label{Fig1}
\end{figure}
-In Figure 1, we illustrate the general overview of system pipeline: \textit{Database, Genomes annotation, Core extraction,} and \textit{relationships}. We will give a short discussion for each stage of the model in order to understand all core extraction process. This work starts with a gene Bank database; however, many international Banks for nucleotide sequence databases (such as, \textit{GenBank} \citep{Sayers01012011} in USA, \textit{EMBL-Bank} \cite{apweiler1985swiss} in Europe, and \textit{DDBJ} \cite{sugawara2008ddbj} in Japon) where exist to store various genomes and DNA species. Different Biological tools are provided to analyse and annotate genomes by interacting with these databases to align and extract sequences to predict genes. The database in this model must be taken from any confident data source that store annotated and/or unannotated chloroplast genomes. We will consider GenBank-NCBI \citep{Sayers01012011} database to be our nucleotide sequences database. Annotation (as the second stage) is considered to be the first important task for Extract Gene Features. Good annotation tool lead us to extracts good gene feature. In this paper, two annotation techniques from \textit{NCBI, and Dogma} used to extract \textit{one genes features}. Extracting Gene feature (as a third stage) can be anything like (genes names, gene sequences, protein sequence,...etc). Our methodologies in this paper consider gene names, gene counts, and gene sequences for extracting core genes and producing chloroplast evolutionary tree. \\
-
-In last stage, to achieve the goal of gene evolution with what the biological expert needs, we used the form of (tables, phylogenetic trees, graphs,...,etc) to organize and represent genomes relationships. In addition, compare these forms with another annotation tool forms for large population of chloroplast genomes give us biological perspective to the nature of chloroplasts evolution. \\
-A Local database attached with each pipe stage is used to store all the informations of extraction process. The output from each stage in our system will be an input to the second stage and so on.
+In Figure 1, we illustrate the general overview of system pipeline: \textit{Database, Genomes annotation, Core extraction,} and \textit{relationships}. We will give a short discussion for each stage of the model in order to understand the whole core extraction process. This work starts with a gene Bank database; however, many international Banks for nucleotide sequence databases (such as, \textit{GenBank} \cite{Sayers01012011} in USA, \textit{EMBL-Bank} \cite{apweiler1985swiss} in Europe, and \textit{DDBJ} \cite{sugawara2008ddbj} in Japon) exist to store various genomes and DNA species. Different biological tools can analyse and annotate genomes by interacting with these databases to align and extract sequences to predict genes. The database in this model must be taken from any confident data source that stores annotated and/or unannotated chloroplast genomes. We consider GenBank-NCBI \cite{Sayers01012011} database to be our nucleotide sequences database. Annotation (as the second stage) is considered to be the first important task for extract gene features. Good annotation tool leads us to extract good gene feature. In this paper, two annotation techniques from \textit{NCBI, and Dogma} are used to extract \textit{genes features}. Extracting gene feature (as a third stage) can be anything like (genes names, gene sequences, protein sequence,...etc). Our methodology in this paper consider gene names, genes counts, and gene sequence for extracting core genes and producing chloroplast evolutionary tree. \\
+In last stage, features visualization represents methods to visualize genomes and/or gene evolution in chloroplast. We use the forms of tables, phylogenetic trees, graphs,...,etc to organize and represent genomes relationships to achieve the goal of representing gene evolution. In addition, comparing these forms with another annotation tool forms dedicated to large population of chloroplast genomes give us biological perspectives to the nature of chloroplasts evolution. \\
+A local database attached with each pipe stage is used to store all the informations of extraction process. The output from each stage in our system will be an input to the second stage and so on.
\subsection{Genomes Samples}
-In this research, we retrieved genomes of Chloroplasts from NCBI. Ninety nine genome of them were considered to work with. These genomes lies in the eleven type of chloroplast families, as shown in Table \ref{Tab1}. The distribution of genomes is illustrated in detail in Table \ref{Tab2}.
+In this research, we retrieve genomes of Chloroplasts from NCBI. Ninety nine genome of them are considered to work with. These genomes lies in the eleven type of chloroplast families. The distribution of genomes is illustrated in detail in Table \ref{Tab2}.
\input{population_Table}
\subsection{Genome Annotation Techniques}
-Genome annotation is the second stage in the model pipeline. Many techniques were developed to annotate chloroplast genomes but the problem is that they vary in the number and type of predicting genes (i.e the ability to predict genes and \textit{for example: Transfere RNA (tRNA)} and \textit{Ribosomal RNA (rRNA)} genes). Two annotation techniques from NCBI and Dogma are considered to analyse chloroplast genomes to examine the accuracy of predicted coding genes.
+Genome annotation is the second stage in the model pipeline. Many techniques were developed to annotate chloroplast genomes but the problem is that they vary in the number and type of predicted genes (\emph{i.e.} the ability to predict genes and \textit{for example: Transfer RNA (tRNA)} and \textit{Ribosomal RNA (rRNA)} genes). Two annotation techniques from NCBI and Dogma are considered to analyse chloroplast genomes to examine the accuracy of predicted coding genes.
-\subsubsection{genome annotation from NCBI}
-The objective from this step is to organize genes, solve gene duplications, and generate sets of genes from each genome. The input to the system is our list of chloroplast genomes, annotated from NCBI. All genomes stored as \textit{.fasta} files include collection of protein coding genes\cite{parra2007cegma,RDogma}(gene that produce proteins) with its coding sequences.
-As a preparation step to achieve the set of core genes, we need to analyse these genomes (using \textit{BioPython} package\cite{chapman2000biopython}
-), to extracting all information needed to find the core genes. The process starts by converting each genome from fasta format to GenVision\cite{geneVision} formats from DNASTAR. The outputs from this operation are lists of genes for each genome, their genes names and gene counts. In this stage, we accumulate some Gene duplications for each treated genome. In other words, duplication in gene name can comes from genes fragments as long as chloroplast DNA sequences. We defines \textit{Identical state} to be the state that each gene present only one time in a genome (i.e Gene has no copy) without considering the position or gene orientation. This state can be reached by filtering the database from redundant gene name.
+\subsubsection{Genome annotation from NCBI}
+The objective from this step is to organize genes, solve gene duplications, and generate sets of genes from each genome. The input to the system is a list of chloroplast genomes, annotated from NCBI. All genomes stored as \textit{.fasta} files which have a collection of protein coding genes\cite{parra2007cegma,RDogma} (gene that produce proteins) with its coding sequences.
+As a preprocessing step to build the set of core genes, we need to analyse these genomes (using \textit{BioPython} package\cite{chapman2000biopython}). The process starts by converting each genome from fasta format to GenVision\cite{geneVision} format from DNASTAR. The outputs from this operation are lists of genes for each genome, their gene names and gene counts. In this stage, we accumulate some gene duplications for each treated genome. These gene name duplication can come from gene fragments, (e.g. gene fragments treated with NCBI), and from chloroplast DNA sequences. To ensure that all the duplications are removed, each list of genes is translated into a set of genes. NCBI genome annotation produce genes except \textit{Ribosomal rRNA}.
\subsubsection{Genome annotation from Dogma}
-Dogma \cite{RDogma} is an annotation tool developed in the university of Texas in 2004. Dogma is an abbreviation of (\textit{Dual Organellar GenoMe Annotator}) for plant chloroplast and animal mitochondrial genomes.
-It has its own database for translating the genome in all six reading frames and query the amino acid sequence database using Blast\cite{altschul1990basic}(i.e Blastx) with various parameters. Further more, identify protein coding genes\cite{parra2007cegma,RDogma} in the input genome based on sequence similarity of genes in Dogma database. In addition, it can produce the \textit{Transfer RNAs (tRNA)}, and the \textit{Ribosomal RNAs (rRNA)} and verifies their start and end positions rather than NCBI annotation tool. There are no gene duplication with dogma after solving gene fragmentation. \\
-Genome Anntation with dogma can be the key difference of extracting core genes. In figure \ref{dog:Annotation}, The step of annotation divided into two tasks: First, It starts to annotate complete choloroplast genomes (i.e \textit{Unannotated genomes} from NCBI by using Dogma web tool. The whole annotation process was done manually. The output from dogma is considered to be collection of coding genes file for each genome in the form of GeneVision\cite{geneVision} file format.\\
-Where the second task is to solve gene fragments. Defragment process starts immediately after the first task to solve fragments of coding genes for each genome to avoid gene duplication. This process looks for fragment orientation: if it is negative, then the process applis reverse complement operations on gene sequence. All genomes after this stage are fully annotated, their genes were de-fragmented, genes lists and counts were identified.\\
-
-\begin{figure}[H]
- \centering
- \includegraphics[width=0.7\textwidth]{Dogma_GeneName}
- \caption{Dogma Annotation for Chloroplast genomes}\label{dog:Annotation}
-\end{figure}
+Dogma is an annotation tool developed in the university of Texas in 2004. Dogma is an abbreviation of (\textit{Dual Organellar GenoMe Annotator}) for plant chloroplast and animal mitochondrial genomes.
+It has its own database for translating the genome in all six reading frames and it queries the amino acid sequence database using Blast\cite{altschul1990basic}(\emph{i.e.} Blastx) with various parameters. Furthermore, identify protein coding genes in the input genome based on sequence similarity of genes in Dogma database. In addition, it can produce the \textit{Transfer RNAs (tRNA)}, and the \textit{Ribosomal RNAs (rRNA)} and verifies their start and end positions rather than NCBI annotation tool. There is no gene duplication with dogma after solving gene fragmentation. \\
+Genome annotation with dogma can be the key difference of extracting core genes. The step of annotation is divided into two tasks: first, It starts to annotate complete chloroplast genomes (\emph{i.e.} \textit{Unannotate genome from NCBI} by using Dogma web tool. This process is done manually. The output from dogma is considered to be a collection of coding genes files for each genome in the form of GeneVision file format.
+The second task is to solve gene fragments. Two methods are used to solve gene duplication. First, for the method based on gene name, all the duplications are removed, where each list of genes is translated into a set of genes. Second, for the method of gene quality test, a defragment process used to avoid gene duplication. \\
+In each iteration, this process starts by taking one gene from gene list, searches for gene duplication, if exists, it looks on the orientation of the fragment sequence: if it is positive, then it appends fragment sequence to a gene files. Otherwise, the process applies reverse complement operations on gene sequences and appends it to gene files. An additional process is then applied to check start and stop codons in case of missing. All genomes after this stage are fully annotated, their genes are de-fragmented, and counts are identified.\\
\subsection{Core Genes Extraction}
-The goal of this step is to extract maximum core genes from sets of genes. The methodology of finding core genes is divided into three methods: \\
+The goal of this step is to extract maximum core genes from sets of genes. The methodology of finding core genes is as follow: \\
-The first method is based on extracting core genes by finding common genes feature (i.e Gene names, genes counts). Genomes vary in genes counts according to the annotation used method, so that extracting core genes can be done by constructing Intersection Core Matrix (\textit{ICM}).\\
-While the second method is based on comparing the sequence of reference genes of one annotated genome with other unannotated genomes sequences in Blast database, by using Blastn\cite{Sayers01012011} (nucleotide sequence alignment tool from NCBI). The last method, is based on merge all genes from NCBI and Dogma annotation, then apply a sequence similarity base method (Quality Control test) using Needle-man Wunch algorithm to predict a new genomes. Using predicted genomes to extract core genes using previous methods. Figure \ref{wholesystem}, illustrate the whole system operations.
+\subsubsection{Pre-Processing}
+We apply two pre-processing methods to organize and prepare genomes data: the first method based on gene name and count, and the second one is based on sequence quality control test.\\
+In the first method, we extract a list of genes from each chloroplast genome. Then we store this list of genes in the database under genome name. Genes counts can be extracted by a specific length command. \textit{Intersection Core Matrix} then applied to extract the core genes. The problem with this method is how can we ensure that the gene which is predicted in core genes is the same gene in leaf genomes? The answer of this question is as follows: if the sequence of any gene in a genome annotated from dogma and NCBI are similar with respect to a threshold, we do not have any problem with this method. Otherwise, we have a problem, because we can not decide which sequence goes to a gene in core genes.
+The second pre-processing method states: we can predict the best annotated genome by merging the annotated genomes from NCBI and dogma if we follow the quality of genes names and sequences test. To generate all quality genes of each genome, the hypothesis state: any gene will be in predicted genome if and only if the annotated genes between NCBI and Dogma pass a specific threshold of \textit{quality control test}. To accept the quality test, we applied Needle-man Wunch algorithm to compare two gene sequences with respect to a threshold. If the alignment score passes the threshold, then the gene will be in the predicted genome. Otherwise, the gene is ignored. After predicting all genomes, \textit{Intersection Core Matrix} is applied on these new genomes to extract core genes, as shown in Algorithm \ref{Alg3:thirdM}.
-\begin{figure}[H]
- \centering
- \includegraphics[width=0.7\textwidth]{Whole_system}
- \caption{Total overview of the system pipeline}\label{wholesystem}
-\end{figure}
+\begin{algorithm}[H]
+\caption{Extract new genome based on Gene Quality test}
+\label{Alg3:thirdM}
+\begin{algorithmic}
+\REQUIRE $Gname \leftarrow \text{Genome Name}, Threshold \leftarrow 65$
+\ENSURE $geneList \leftarrow \text{Quality genes}$
+\STATE $dir(NCBI\_Genes) \leftarrow \text{NCBI genes of Gname}$
+\STATE $dir(Dogma\_Genes) \leftarrow \text{Dogma genes of Gname}$
+\STATE $geneList=\text{empty list}$
+\STATE $common=set(dir(NCBI\_Genes)) \cap set(dir(Dogma\_Genes))$
+\FOR{$\text{gene in common}$}
+ \STATE $g1 \leftarrow open(NCBI\_Genes(gene)).read()$
+ \STATE $g2 \leftarrow open(Dogma\_Genes(gene)).read()$
+ \STATE $score \leftarrow geneChk(g1,g2)$
+ \IF {$score > Threshold$}
+ \STATE $geneList \leftarrow gene$
+ \ENDIF
+\ENDFOR
+\RETURN $geneList$
+\end{algorithmic}
+\end{algorithm}
-In the first method, the idea is to iterativelly collect the maximum number of common genes. To do so, the system builds an \textit{Intersection core matrix (ICM)}. ICM is a two dimensional symmetric matrix where each row and column represent one genome. Each position in ICM stores the \textit{intersection scores (IS)}. The Intersection Score is the cardinality number of a core genes comes from intersecting one ????? with other ??????. Maximum cardinality results to select two genomes with their maximum core. Mathematically speaking, if we have an $n \times n$ matrix where $n=\text{number of genomes in local database}$, then lets consider:\\
+\textbf{geneChk} is a subroutine, it is used to find the best similarity score between two gene sequences after applying operations like \textit{reverse, complement, and reverse complement}. The algorithm of geneChk is illustrated in Algorithm \ref{Alg3:genechk}.
+\begin{algorithm}[H]
+\caption{Find the Maximum similarity score between two sequences}
+\label{Alg3:genechk}
+\begin{algorithmic}
+\REQUIRE $gen1,gen2 \leftarrow \text{NCBI gene sequence, Dogma gene sequence}$
+\ENSURE $\text{Maximum similarity score}$
+\STATE $Score1 \leftarrow needle(gen1,gen2)$
+\STATE $Score2 \leftarrow needle(gen1,Reverse(gen2))$
+\STATE $Score3 \leftarrow needle(gen1,Complement(gen2))$
+\STATE $Score4 \leftarrow needle(gen1,Reverse(Complement(gen2)))$
+\RETURN $max(Score1, Score2, Score3, Score4)$
+\end{algorithmic}
+\end{algorithm}
+
+\subsubsection{Intersection Core Matrix (\textit{ICM})}
+
+The idea behind extracting core genes is to iteratively collect the maximum number of common genes between two genomes. To do so, the system builds an \textit{Intersection Core Matrix (ICM)}. ICM is a two dimensional symmetric matrix where each row and each column represents one genome. Each position in ICM stores the \textit{Intersection Scores(IS)}. IS is the cardinality number of a core genes which comes from intersecting one genome with other ones. Maximum cardinality results to select two genomes with their maximum core. Mathematically speaking, if we have an $n \times n$ matrix where $n \text{is the number of genomes in local database}$, then lets consider:\\
\begin{equation}
Score=\max_{i<j}\vert x_i \cap x_j\vert
\label{Eq1}
-\end{equation}\\
-
-Where $x_i, x_j$ are elements in the matrix. The generation of a new core genes is depending on the cardinality value of intersection elements, we call it $Score$:\\
+\end{equation}
+where $x_i, x_j$ are elements in the matrix. The generation of a new core genes is depending on the cardinality value of intersection scores, we call it \textit{Score}:
$$\text{New Core} = \begin{cases}
-\text{Ignored} & \text{if $Score=0$;} \\
-\text{new Core id} & \text{if $Score>0$.}
-\end{cases}$$\\
+\text{Ignored} & \text{if $\textit{Score}=0$;} \\
+\text{new Core id} & \text{if $\textit{Score}>0$.}
+\end{cases}$$
-if $Score=0$ then we have \textit{disjoint relation} (i.e no common genes between two genomes). In this case the system ignore the vector that smash the core genes. Otherwise, The system will remove these two vectors from ICM and add new core vector with a \textit{coreID} of them to ICM for the calculation in next iteration. The partial core vectors generated with its values will store in the local database for reused to draw the tree. This process repeat until all vectors treated.
-We observe that ICM will result to be very large because of the huge amount of data that it stores. In addition, this will results to be time and memory consuming for calculating the intersection scores by using just genes names. To increase the speed of calculations, we can calculate the upper triangle scores only and exclude diagonal scores. This will reduce whole processing time and memory to half. The time complexity for this process after enhancement changed from $O(n^2-n)$ to $O(\frac{(n-1).n}{2})$. The Algorithm of construction the vector matrix and extracting the vector of maximum core genes where illustrated in Algorithm \ref{Alg1:ICM}. The output from this step is the maximum core vector with its two vectors to draw it in a tree.\\
+if $\textit{Score}=0$ then we have \textit{disjoint relation} \emph{i.e.}, no common genes between two genomes. In this case the system ignores the genome that annul the core gene size. Otherwise, The system removes these two genomes from ICM and add new core genome with a \textit{coreID} of them to ICM for the calculation in next iteration. This process reduces the size of ICM and repeats until all genomes are treated \emph{i.e.} ICM has no more genomes.
+We observe that ICM is very large because of the amount of data that it stores. This results to be time and memory consuming for calculating the intersection scores. To increase the speed of calculations, it is sufficient to only calculate the upper triangle scores. The time complexity for this process after enhancement is thus $O(\frac{n.(n-1)}{2})$. Algorithm \ref{Alg1:ICM} illustrates the construction of the ICM matrix and the extraction of the core genes where \textit{GenomeList}, represents the database where all genomes data are stored. At each iteration, it computes the maximum core genes with its two genomes parents.
\begin{algorithm}[H]
\caption{Extract Maximum Intersection Score}
\RETURN $max(B1)$
\end{algorithmic}
\end{algorithm}
-\textit{GenomeList} represents the local database.\\
-In second Method, due to the number of annotated genomes, annotate each genome can be very exhausted task specially with Dogma, because dogma offer a web tool for annotation, so that, each genome must annotate using this web tool. This operation need to do manually. We prefer to recover this problem by choosing one reference chloroplast and querying each reference gene by using \textit{Blastn} to examin its existance in remaining unannotated genomes in blast database. Collect all match genomes from each gene hits, to satisfy the hypothesis "the gene who exists in maximum number of genomes also exist in a core genes". In addition, we can also extract the maximum core genes by examine how many genes present with each genome?. Algorithm \ref{Alg2:secondM}, state the general algorithm for second method. \\
+\subsection{Features Visualization}
+The goal here is to visualize results by building a tree of evolution. All core genes generated with their genes are very important information in the tree, because they can be viewed as an ancestor information for two genomes or more. Further more, each node in the tree represents one chloroplast genome or one predicted core which named under the title of \textit{(Genes count:Family name\_Scientific names\_Accession number)}, Edges represent the number of lost genes from each leaf genome or from an intermediate core genes. The number of lost genes here can represent an important factor for evolution: it represents how much is the lost of genes from the species belongs to same or different families. By the principle of classification, a small number of gene lost among species indicates that those species are close to each other and belong to same family, while big genes lost means that we have an evolutionary relationship between species from different families. To see the picture clearly, Phylogenetic tree is an evolutionary tree generated also by the system. Generating this tree is based on the distances among genes sequences. There are many resources to build such tree (for example: PHYML\cite{guindon2005phyml}, RAxML{\cite{stamatakis2008raxml,stamatakis2005raxml}, BioNJ , and TNT\cite{goloboff2008tnt}}. We consider to use RAxML\cite{stamatakis2008raxml,stamatakis2005raxml} because it is fast and accurate for build large trees for large count of genomes sequences. The procedure of constructing phylogenetic tree stated in the following steps:
-\begin{algorithm}[H]
-\caption{Extract Maximum Core genes based on Blast}
-\label{Alg2:secondM}
-\begin{algorithmic}
-\REQUIRE $Ref\_Genome \leftarrow \text{Accession No}$
-\ENSURE $core \leftarrow \text{Genomes for each gene}$
-\FOR{$gene \leftarrow Ref\_Genome$}
- \STATE $G\_list= \text{empty list}$
- \STATE $File \leftarrow Blastn(gene)$
- \STATE $G\_list \leftarrow File[\text{Genomes names}]$
- \STATE $Core \leftarrow [Accession\_No:G\_list]$
-\ENDFOR
-\RETURN $Core$
-\end{algorithmic}
-\end{algorithm}
-
-The hypothesis in last method state: we can predict the best annotated genome by merge the annotated genomes from NCBI and dogma based on the quality of genes names and sequences. To generate all quality genes of each genome. the hypothesis state: Any gene will be in predicted genome if and only if the annotated genes between NCBI and Dogma pass a specific threshold of\textit{quality control test}. To accept the quality test, we applied Needle-man Wunch algorithm to compare two gene sequences with respect to pass a threshold. If the alignment score pass this threshold, then the gene will be in the predicted genome, else the gene will be ignored. After predicting all genomes, one of previous two methods can be applied to extract core genes. As shown in Algorithm \ref{Alg3:thirdM}.
-
-\begin{algorithm}[H]
-\caption{Extract new genome based on Gene Quality test}
-\label{Alg3:thirdM}
-\begin{algorithmic}
-\REQUIRE $Gname \leftarrow \text{Genome Name}, Threshold \leftarrow 65$
-\ENSURE $geneList \leftarrow \text{Quality genes}$
-\STATE $dir(NCBI\_Genes) \leftarrow \text{NCBI genes of Gname}$
-\STATE $dir(Dogma\_Genes) \leftarrow \text{Dogma genes of Gname}$
-\STATE $geneList=\text{empty list}$
-\STATE $common=set(dir(NCBI\_Genes)) \cap set(dir(Dogma\_Genes))$
-\FOR{$\text{gene in common}$}
- \STATE $g1 \leftarrow open(NCBI\_Genes(gene)).read()$
- \STATE $g2 \leftarrow open(Dogma\_Genes(gene)).read()$
- \STATE $score \leftarrow geneChk(g1,g2)$
- \IF {$score > Threshold$}
- \STATE $geneList \leftarrow gene$
- \ENDIF
-\ENDFOR
-\RETURN $geneList$
-\end{algorithmic}
-\end{algorithm}
-
-Here, geneChk is a subroutine in python, it is used to find the best similarity score between two gene sequences after applying operations like \textit{reverse, complement, and reverse complement}. The algorithm of geneChk is illustrated in Algorithm \ref{Alg3:genechk}.
-
-\begin{algorithm}[H]
-\caption{Find the Maximum similarity score between two sequences}
-\label{Alg3:genechk}
-\begin{algorithmic}
-\REQUIRE $gen1,gen2 \leftarrow \text{NCBI gene sequence, Dogma gene sequence}$
-\ENSURE $\text{Maximum similarity score}$
-\STATE $Score1 \leftarrow needle(gen1,gen2)$
-\STATE $Score2 \leftarrow needle(gen1,Reverse(gen2))$
-\STATE $Score3 \leftarrow needle(gen1,Complement(gen2))$
-\STATE $Score4 \leftarrow needle(gen1,Reverse(Complement(gen2)))$
-\IF {$max(Score1, Score2, Score3, Score4)==Score1$}
- \RETURN $Score1$
-\ELSIF {$max(Score1, Score2, Score3, Score4)==Score2$}
- \RETURN $Score2$
-\ELSIF {$max(Score1, Score2, Score3, Score4)==Score3$}
- \RETURN $Score3$
-\ELSIF {$max(Score1, Score2, Score3, Score4)==Score4$}
- \RETURN $Score4$
-\ENDIF
-\end{algorithmic}
-\end{algorithm}
+\begin{enumerate}
+\item Extract gene sequence for all gene in all core genes, store it in database.
+\item Use multiple alignment tool such as (****to be write after see christophe****) to align these sequences with each others.
+\item aligned genomes sequences then submitted to RAxML program to compute the distances and draw phylogenetic tree.
+\end{enumerate}
-\subsection{Visualizing Relationships}
-The goal here is to visualizing the results by build a tree of evolution. The system can produce this tree automatically by using Dot graphs package\cite{gansner2002drawing} from Graphviz library and all information available in a database. Core genes generated with their genes can be very important information in the tree, because they can viewed as an ancestor information for two genomes or more. Further more, each node represents a genome or core as \textit{(Genes count:Family name, Scientific names, Accession number)}, Edges represent numbers of lost genes from genomes-core or core-core relationship. The number of lost genes here can represent an important factor for evolution, it represents how much lost of genes for the species in same or different families. By the principle of classification, small number of gene lost among species indicate that those species are close to each other and belong to same family, while big genes lost means that species is far to be in the same family. To see the picture clearly, Phylogenetic tree is an evolutionary tree generated also by the system. Generating this tree is based on the distances among genes sequences. There are many resources to build such tree (for example: PHYML\cite{guindon2005phyml}, RAxML{\cite{stamatakis2008raxml,stamatakis2005raxml}, BioNJ , and TNT\cite{goloboff2008tnt}}. We consider to use RAxML\cite{stamatakis2008raxml,stamatakis2005raxml} to generate this tree.
+\begin{figure}[H]
+ \centering
+ \includegraphics[width=0.7\textwidth]{Whole_system}
+ \caption{Total overview of the system pipeline}\label{wholesystem}
+\end{figure}
\section{Implementation}
We implemented four algorithms to extract maximum core genes from large amount of chloroplast genomes. Two algorithms used to extract core genes based on NCBI annotation, and the others based on dogma annotation tool. Evolutionary tree generated as a result from each method implementation. In this section, we will present the four methods, and how they can extract maximum core genes?, and how the developed code will generate the evolutionary tree.
\subsubsection{Core Genes based on NCBI Annotation}
The first idea to construct the core genome is based on the extraction of Genes names (as gene presence or absence). For instant, in this stage neither sequence comparison nor new annotation were made, we just want to extract all genes with counts stored in each chloroplast genome, then find the intersection core genes based on gene names. \\
-The pipeline of extracting core genes can summarize in the following steps:\\
-First, we apply the genome annotation method using NCBI annotation tool. Genome quality check can be used in this step to ensure that genomes pass some quality condition. Then, the system lunch annotation process using NCBI to extract code genes (i.e \textit{exons}) and solve gene fragments. From NCBI, we did not observe any problem with genes fragments, but there are a problem of genes orthography (e.g two different genes sequences with same gene name). After we obtain all annotated genomes from NCBI to the local database, the code will then automatically will generate GenVision\cite{geneVision} file format to lunch the second step to extract coding genes names and counts. The competition will start by building intersection matrix to intersect genomes vectors in the local database with the others. New core vector for two leaf vectors will generate and a specific \textit{CoreId} will assign to it. an evolutionary tree will take place by using all data generated from step 1 and 2. The tree will also display the amount of genes lost from each intersection iteration. A specific excel file will be generated that store all the data in local database. The whole operation illstrate in Figure \ref{NCBI:geneextraction}.
+The pipeline of extracting core genes can summarize in the following steps according to pre-processing method used:\\
-\begin{figure}[H]
- \centering
- \includegraphics[width=0.7\textwidth]{NCBI_geneextraction}
- \caption{Extract core genes based on NCBI gene names and counts}\label{NCBI:geneextraction}
-\end{figure}
-
-\subsubsection{Core Genes based on Dogma Annotation}
-The main goal is to get as much as possible the core genes of maximum coding genes names. According to NCBI annotation problem based on \cite{Bakke2009}, annotation method like dogma can give us more reliable coding genes than NCBI. This is because NCBI annotation can carry some annotation and gene identification errors. The general overview of whole process of extraction illustrated in figure \ref{dog:Annotation}. From this figure, the pipeline of extracting core genes can summarize in the following steps:\\
-First, we apply the genome annotation method using Dogma annotation tool. Genome quality check can be used in this step to ensure that genomes pass some quality condition. Then, the system lunch annotation process using Dogma to extract code genes (i.e \textit{exons}) and solve gene fragments. The key difference here is that dogma can generate in addition transfer RNA and ribosomal RNA. As a result from annotation process with dogma is genomes files in GenVision\cite{geneVision} file format, the code will lunch genes de-fragments process to avoid genes duplications. little problems of genes orthography (e.g two different genes sequences with same gene name) where exists. After we obtain all annotated genomes from dogma, we store it in the local database. The code will then automatically lunch the second step to extract coding genes names and counts. The competition will start by building intersection matrix to intersect genomes vectors in the local database with the others. New core vector for two leaf vectors will generate and a specific \textit{CoreId} will assign to it. an evolutionary tree will take place by using all data generated from step 1 and 2. The tree will also display the amount of genes lost from each intersection iteration. A specific excel file will be generated that store all the data in local database. The whole operation illustrate in Figure \ref{dogma:geneextraction}.
-
-\begin{figure}[H]
- \centering
- \includegraphics[width=0.7\textwidth]{Dogma_geneextraction}
- \caption{Extract core genes based on Dogma gene names and counts}\label{dogma:geneextraction}
-\end{figure}
-
-The main drawback from the method of extracting core genes based on gene names and counts is that we can not depending only on genes names because of three causes: first, the genome may have not totally named (This can be found in early versions of NCBI genomes), so we will have some lost sequences. Second, we may have two genes sharing the same name, while their sequences are different. Third, we need to annotate all the genomes.
+\begin{enumerate}
+\item We downloads already annotated chloroplast genomes in the form of fasta coding genes (\emph{i.e.} \textit{exons}).
+\item Extract genes names and apply to solve gene duplication using first method.
+\item Convert fasta file format to geneVision file format to generate ICM.
+\item Calculate ICM matrix to find maximum core \textit{Score}. New core genes for two genomes will generate and a specific \textit{CoreId} will assign to it. This process continue until no elements remain in the matrix.
+\item Evolutionary tree will take place by using all data generated from step 1 and 4. The tree will also display the amount of genes lost from each intersection iteration. A specific excel file will be generated that store all the data in local database.
+\end{enumerate}
-\subsection{Extract Core Genes based on Genes Sequences}
-We discussed before on the hypothesis of the second method. In this section, we will implement this hypothesis by using ncbi-Blast alignment tool. Implementation of this method is dividing into two parts: \textit{Core genes from NCBI Annotation} and \textit{Core Genes from Dogma Annotation}. For instance, for the two parts, selecting a reference genome can be a key difference among predicting Core genes. After choosing a reference genome, Local blast database will then created to store the rest of Un-annotated chloroplast genomes. \\
+There main drawback with this method is genes orthography (e.g two different genes sequences with same gene name). In this case, Gene lost is considered by solving gene duplication based on first method to solve gene duplication.
-We will present the algorithm in the following steps:
+\subsubsection{Core Genes based on Dogma Annotation}
+The main goal is to get as much as possible the core genes of maximum coding genes names. According to NCBI annotation problem based on \cite{Bakke2009}, annotation method like dogma can give us more reliable coding genes than NCBI. This is because NCBI annotation can carry some annotation and gene identification errors. The general overview of whole process of extraction illustrated in figure \ref{wholesystem}.
+extracting core genes based on genes names and counts summarized in the following steps:\\
\begin{enumerate}
-\item Select a reference genome: we need to select good reference genome from our population, To do so, we can choose \textit{Lycopersicon esculentum cultivar LA3023 chloroplast NC\_007898.3} to be the reference genome if we consider the version of annotation, or \textit{Zea Mays NC\_001666.2} if we consider the largest number of coding genes based on NCBI annotation.The aim is to extract the maximum core genes. In order to achieve this goal, we choose \textit{Zea Mays NC\_001666.2} to be our reference genome.
-\item Build Blast database for the rest of unannotated genomes.
-\item Compare reference Genes: based on the genomes in the database. We querying each reference gene with the database by using \textbf{Blastn}. The result with alignment scores for each gene will store in separated file.
-\item Generate match table: In this table, each row represent referenced genes, while columns represent genomes. To fill this table, a developed code will open each output file for reference genes and extract the number of genomes and a list of genomes names where gene sequence have hits.
+\item We apply the genome annotation manually using Dogma annotation tool.
+\item Analysing genomes to store lists of code genes names (\textit{i.e. exons}). solve gene fragments is done by using first method in solve gene fragments. The output from annotation process with dogma is genomes files in GenVision file format. Sets of genes were stored in the database.
+\item Generate ICM matrix to calculate maximum core genes.
+\item Draw the evolutionary tree by extracted all genes sequences from each core. Then applying multiple alignment process on the sequences to calculate the distance among cores to draw a phylogenetic tree.
+
\end{enumerate}
-The core genome can be extracted from the table by taking as possible the maximum number of genes that exists in the maximum number of genomes.
+
+The main drawback from the method of extracting core genes based on gene names and counts is that we can not depending only on genes names because of three causes: first, the genome may have not totally named (This can be found in early versions of NCBI genomes), so we will have some lost sequences. Second, we may have two genes sharing the same name, while their sequences are different. Third, we need to annotate all the genomes.
\subsection{Extract Core Genes based on Gene Quality Control}
-The main idea from this method is to focus on genes quality to predict maximum core genes. By comparing only genes names or genes sequences from one annotation tool is not enough. The question here, does the predicted gene from NCBI is the same gene predicted by Dogma based on gene name and gene sequence?. If yes, then we can predict new quiality genomes based on quality control test with a specific threshold. Predicted Genomes comes from merging two annotation techniques. While if no, we can not depending neither on NCBI nor Dogma because of annotation error. Core genes can by predicted by using one of the previous methods.
+The main idea from this method is to focus on genes quality to predict maximum core genes. By comparing only genes names from one annotation tool is not enough. The question here, does the predicted gene from NCBI is the same gene predicted by Dogma based on gene name and gene sequence?. If yes, then we can predict new quality genomes based on quality control test with a specific threshold. Predicted Genomes comes from merging two annotation techniques. While if no, we can not depending neither on NCBI nor Dogma because of annotation error. Core genes can by predicted by using one of the
+\subsubsection{Core genes based on NCBI and Dogma Annotation}
This method summarized in the following steps:\\
\begin{enumerate}
\item Retrieve the annotation of all genomes from NCBI and Dogma: in this step, we apply the annotation of all chloroplast genomes in the database using NCBI annotation and Dogma annotation tool.
-\item Predict quality genomes: the process is to pick a genome annotation from two techniques, extracting all common genes based on genes names, then applying Needle-man wunch algorithm to align the two sequences based on a specific threshold. If the alignment score pass the threshold, then this gene will removed from the competition and store it in quality genome by saving its name with the largest gene sequence with respect to start and end codons. All quality genomes will store in the form of GenVision file format.
-\item Extract Core genes: from the above two steps, we will have new genomes with quality genes, ofcourse, we have some genes lost here, because dogma produced tRNA and rRNA genes while NCBI did not generate them and vise-versa. Using first method to extract core genes will be sufficient because we already check their sequences.
+\item Convert NCBI genomes to GeneVision file format, then apply the second method of gene defragmentation methods for NCBI and dogma genomes.
+\item Predict quality genomes: the process is to pick a genome annotation from two sources, extracting all common genes based on genes names, then applying Needle-man wunch algorithm to align the two sequences based on a threshold equal to 65\%. If the alignment score pass the threshold, then this gene will removed from the competition and store it in quality genome by saving its name with the largest gene sequence with respect to start and end codons. All quality genomes will store in the form of GenVision file format.
+\item Extract Core genes: from the above two steps, we will have new genomes with quality genes, ofcourse, we have some genes lost here, because dogma produced tRNA and rRNA genes while NCBI did not generate rRNA genes and vise-versa. Build ICM to extract core genes will be sufficient because we already check genes sequences.
\item Display tree: An evolution tree then will be display based on the intersections of quality genomes.
\end{enumerate}
-\pagebreak
\ No newline at end of file
