\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
-
+\usepackage{comment}
%\usepackage{newtxtext}
%\usepackage[cmintegrals]{newtxmath}
\usepackage{mathptmx,helvet,courier}
\newcommand{\VAR}[1]{\textit{#1}}
+\newcommand{\besteffort}{\emph{best effort}}
+\newcommand{\makhoul}{\emph{Bertsekas and Tsitsiklis}}
+
\begin{document}
\begin{frontmatter}
asynchronous iterative load balancing}
\author{Raphaël Couturier}
-\ead{raphael.couturier@femto-st.fr}
+\ead{raphael.couturier@univ-fcomte.fr}
\author{Arnaud Giersch\corref{cor}}
-\ead{arnaud.giersch@femto-st.fr}
+\ead{arnaud.giersch@univ-fcomte.fr}
+
+\author{Mourad Hakem}
+\ead{mourad.hakem@univ-fcomte.fr}
-\address{FEMTO-ST, University of Franche-Comté\\
- 19 avenue de Maréchal Juin, BP 527, 90016 Belfort cedex , France\\
- % Tel.: +123-45-678910\\
- % Fax: +123-45-678910\\
-}
+\address{%
+ FEMTO-ST Institute, Univ Bourgogne Franche-Comté, Belfort, France}
\cortext[cor]{Corresponding author.}
\begin{abstract}
- Most of the time, asynchronous load balancing algorithms have extensively been
- studied in a theoretical point of view. The Bertsekas and Tsitsiklis'
- algorithm~\cite[section~7.4]{bertsekas+tsitsiklis.1997.parallel} is certainly
- the most well known algorithm for which the convergence proof is given. From a
- practical point of view, when a node wants to balance a part of its load to
- some of its neighbors, the strategy is not described. In this paper, we
- propose a strategy called \emph{best effort} which tries to balance the load
- of a node to all its less loaded neighbors while ensuring that all the nodes
- concerned by the load balancing phase have the same amount of load. Moreover,
- asynchronous iterative algorithms in which an asynchronous load balancing
- algorithm is implemented most of the time can dissociate messages concerning
- load transfers and message concerning load information. In order to increase
- the converge of a load balancing algorithm, we propose a simple heuristic
- called \emph{virtual load} which allows a node that receives a load
- information message to integrate the load that it will receive later in its
- load (virtually) and consequently sends a (real) part of its load to some of
- its neighbors. In order to validate our approaches, we have defined a
- simulator based on SimGrid which allowed us to conduct many experiments.
+ Most of the time, asynchronous load balancing algorithms are extensively
+ studied from a theoretical point of view. The Bertsekas and Tsitsiklis'
+ algorithm~\cite{bertsekas+tsitsiklis.1997.parallel} is undeniably the best known algorithm for which the asymptotic convergence proof is given.
+ From a
+ practical point of view, when a node needs to balance a part of its load to
+ some of its neighbors, the algorithm's description is unfortunately too succinct, and no details are given on what is really sent and how the load balancing decisions are made. In this paper, we
+ propose a new strategy called \besteffort{} which aims at balancing the load
+ of a node to all its less loaded neighbors while ensuring that all involved nodes by the load balancing phase have the same amount of load. Moreover, since
+ asynchronous iterative algorithms are less sensitive to communication delays
+ and their variations \cite{bcvc07:bc}, both load transfer and load information messages are dissociated.
+ To speedup the convergence time of the load balancing process, we propose {\it a clairvoyant virtual load} heuristic. This heuristic allows a node receiving a load
+ information message to integrate the future virtual load (if any) in its load's list, even if the load has not been received yet. This leads to have predictive snapshots of nodes' loads at each iteration of the load balancing process. Consequently, the notified node sends a real part of its load to some of
+ its neighbors, taking into account the virtual load it will receive in the subsequent time-steps. Based on the SimGrid simulator, some series of test-bed scenarios are considered and several QoS metrics are evaluated to show the usefulness of the proposed algorithm.
\end{abstract}
% \begin{keywords}
\section{Introduction}
-Load balancing algorithms are extensively used in parallel and distributed
-applications in order to reduce the execution times. They can be applied in
-different scientific fields from high performance computation to micro sensor
-networks. They are iterative by nature. In literature many kinds of load
-balancing algorithms have been studied. They can be classified according
-different criteria: centralized or decentralized, in static or dynamic
-environment, with homogeneous or heterogeneous load, using synchronous or
-asynchronous iterations, with a static topology or a dynamic one which evolves
-during time. In this work, we focus on asynchronous load balancing algorithms
-where computer nodes are considered homogeneous and with homogeneous load with
-no external load. In this context, Bertsekas and Tsitsiklis have proposed an
-algorithm which is definitively a reference for many works. In their work, they
-proved that under classical hypotheses of asynchronous iterative algorithms and
-a special constraint avoiding \emph{ping-pong} effect, an asynchronous
-iterative algorithm converge to the uniform load distribution. This work has
-been extended by many authors. For example, Cortés et al., with
-DASUD~\cite{cortes+ripoll+cedo+al.2002.asynchronous}, propose a
-version working with integer load. This work was later generalized by
-the same authors in \cite{cedo+cortes+ripoll+al.2007.convergence}.
-\FIXME{Rajouter des choses ici. Lesquelles ?}
-
-Although the Bertsekas and Tsitsiklis' algorithm describes the condition to
-ensure the convergence, there is no indication or strategy to really implement
-the load distribution. In other word, a node can send a part of its load to one
-or many of its neighbors while all the convergence conditions are
-followed. Consequently, we propose a new strategy called \emph{best effort}
+Load balancing algorithms are widely used in parallel and distributed
+applications to achieve high performances in terms of response time, throughput and resources usage. They play an important role and arise in various fields ranging from parallel and distributed
+computing systems to wireless sensor networks (WSN).
+The objective of load balancing is to orchestrate the distribution of the global load so that
+the load difference between the computational resources of the network is
+minimized as much as possible. Unfortunately, this problem is known to be {\bf NP-hard} in its
+general form and heuristics are required to achieve sub-optimal solutions but in
+polynomial time complexity.
+
+In this paper, we focus on asynchronous load balancing of non negative real numbers of {\it divisible loads}
+in homogeneous distributed systems. Loads can be divided in arbitrary {\it fine-grain} parallel parts size
+that can be processed independently of each other~\cite{Bharadwaj1996, Drozdowski1998, Casanova2008}. This model of divisible loads arises in
+a wide range of real-world applications. Common examples, among many, include signal processing,
+feature extraction and edge detection in image processing, records search in huge databases,
+average consensus in WSN, pattern search in Big data and so on.
+
+
+In the literature, the problem of load balancing has been formulated and studied in various ways. The first pioneering work is due to Bertsekas and Tsitsiklis~\cite{bertsekas+tsitsiklis.1997.parallel}. Under some specific hypothesis and {\it ping-pong} awareness conditions (see section~\ref{sec.bt-algo} for more details), an asymptotic convergence proof is derived.
+
+
+Although Bertsekas and Tsitsiklis describe the necessary conditions to
+ensure the algorithm's convergence, there is no indication nor any strategy to really implement
+the load distribution.
+Consequently, we propose a new strategy called \besteffort{}
that tries to balance the load of a node to all its less loaded neighbors while
-ensuring that all the nodes concerned by the load balancing phase have the same
-amount of load. Moreover, when real asynchronous applications are considered,
-using asynchronous load balancing algorithms can reduce the execution
-times. Most of the times, it is simpler to distinguish load information messages
-from data migration messages. Former ones allows a node to inform its
-neighbors of its current load. These messages are very small, they can be sent
-quite often. For example, if an computing iteration takes a significant times
+ensuring that all the nodes involved in the load balancing phase have the same
+amount of load. Moreover, most of the time, it is simpler to dissociate load information messages
+from data migration messages. Former ones allow a node to inform its
+neighbors about its current load. These messages are in fact very small and can often be sent
+very quickly. For example, if a computing iteration takes a significant time
(ranging from seconds to minutes), it is possible to send a new load information
-message at each neighbor at each iteration. Latter messages contains data that
-migrates from one node to another one. Depending on the application, it may have
-sense or not that nodes try to balance a part of their load at each computing
-iteration. But the time to transfer a load message from a node to another one is
-often much more longer that to time to transfer a load information message. So,
-when a node receives the information that later it will receive a data message,
-it can take this information into account and it can consider that its new load
-is larger. Consequently, it can send a part of it real load to some of its
-neighbors if required. We call this trick the \emph{virtual load} mechanism.
-
-
-
-So, in this work, we propose a new strategy for improving the distribution of
-the load and a simple but efficient trick that also improves the load
-balancing. Moreover, we have conducted many simulations with SimGrid in order to
-validate our improvements are really efficient. Our simulations consider that in
-order to send a message, a latency delays the sending and according to the
-network performance and the message size, the time of the reception of the
-message also varies.
-
-In the following of this paper, Section~\ref{sec.bt-algo} describes the
-Bertsekas and Tsitsiklis' asynchronous load balancing algorithm. Moreover, we
-present a possible problem in the convergence conditions.
-Section~\ref{sec.besteffort} presents the best effort strategy which provides an
-efficient way to reduce the execution times. This strategy will be compared
-with other ones, presented in Section~\ref{sec.other}. In
-Section~\ref{sec.virtual-load}, the virtual load mechanism is proposed.
-Simulations allowed to show that both our approaches are valid using a quite
-realistic model detailed in Section~\ref{sec.simulations}. Finally we give a
-conclusion and some perspectives to this work.
+message to each involved neighbor at each iteration. The load is then sent, but the reception may take time when the amount of load is huge and when communication links are slow. Depending on the application, it may or may not make sense for the nodes to try to balance a part of their load at each computing
+iteration. But the time needed to transfer a load message from one node to another is
+often much longer than the time needed to transfer a load information message. So,
+when a node is notified
+%receives the information
+that later it will receive a data message,
+it can take this information into account in its load's queue list for preventive purposes.
+%and it can consider that its new load is larger.
+Consequently, it can send a part of its predictive
+%real
+load to some of its
+neighbors if required. We call this trick the \emph{clairvoyant virtual load} transfer mechanism.
+
+\medskip
+The main contributions and novelties of our work are summarized in the following section.
+
+\section{Our contributions}
+\label{contributions}
+\begin{itemize}
+\item We propose a {\it best effort strategy} which proceeds greedily to achieve efficient local neighborhoods equilibrium. Upon local load imbalance detection, a {\it significant amount} of load is moved from a highly loaded node (initiator) to less loaded neighbors.
+
+\item Unlike earlier works, we use a new concept of virtual loads transfer which allows nodes to predict the future loads they will receive in the subsequent iterations.
+This leads to a noticeable speedup of the global convergence time of the load balancing process.
+
+\item The SimGrid simulator, which is known to handle realistic models of computation and communication in different types of platforms was used. Taking into account both loads transfers' costs and network contention is essential and has a real impact on the quality of the load balancing performances.
+
+\end{itemize}
+
+
+
+The reminder of the paper is organized as follows. Section~\ref{sec.related.works} offers a review of the relevant approaches in the literature. Section~\ref{sec.bt-algo} describes the
+Bertsekas and Tsitsiklis' asynchronous load balancing algorithm.
+Section~\ref{sec.besteffort} presents the best effort strategy which provides
+efficient local loads equilibrium.
+In Section~\ref{sec.virtual-load}, the clairvoyant virtual load scheme is proposed to speedup the convergence time of the load balancing process.
+In Section~\ref{sec.simulations}, a comprehensive set of numerical results that exhibit the usefulness of our proposal when dealing with realistic models of computation and communication is provided. Finally, some concluding remarks are made in Section~\ref{conclusions-remarks}.
+
+
+\section{Related works}
+\label{sec.related.works}
+In this section, the relevant techniques proposed in the literature to tackle the problem of load balancing in a general context of distributed systems are reviewed.
+
+As pointed above, the most interesting approach to this issue has been proposed by Bertsekas and Tsitsiklis~\cite{bertsekas+tsitsiklis.1997.parallel}. This algorithm, which is outlined in Section~\ref{sec.bt-algo} for the sake of comparison, has been borrowed and adapted in many works. For instance, in~\cite{CortesRCSL02} a static load balancing (called DASUD) for non negative integer number of divisible loads in arbitrary networks topologies is investigated. The term {\it "static"} stems from the fact that no loads are added or consumed during the load balancing process. The theoretical correctness proofs of the convergence property are given. Some generalizations of the same authors' own work for partially asynchronous discrete load balancing model are presented in~\cite{cedo+cortes+ripoll+al.2007.convergence}. The authors prove that the algorithm's convergence is finite and bounded by the straightforward network's diameter of the global equilibrium threshold in the network. In~\cite{bahi+giersch+makhoul.2008.scalable}, a fault tolerant communication version is addressed to deal with average consensus in wireless sensor networks. The objective is to have all nodes converging to the average of their initial measurements based only on nodes' local information. A slight adaptation is also considered in~\cite{BahiCG10} for dynamic networks with bounded delays asynchronous diffusion. The dynamical aspect stands at the communication level as the links between the network's resources may be intermittent.
+
+Cybenko~\cite{Cybenko89} proposes a {\it diffusion} approach for hypercube multiprocessor networks.
+The author targets both static and dynamic random models of work distribution.
+The convergence proof is derived based on the {\it eigenstructure} of the
+iteration matrices that arise in load balancing of equal amount of
+computational works. A static load balancing for both synchronous and asynchronous ring networks is addressed in~\cite{GehrkePR99}. The authors assume that at any time step, one token at the most (units of load) can be transmitted along any edge of the ring and no tokens are created during the balancing phase. They show that for every initial token distribution, the proposed algorithm converges to the stable equilibrium with tighter linear bounds of time step-complexity.
+
+In order to achieve the load balancing of cloud data centers, a LB technique based on Bayes theorem and Clustering is proposed in~\cite{zhao2016heuristic}. The main idea of this approach is that the Bayes theorem is combined with the clustering process to obtain the optimal clustering set of physical target hosts leading to the overall load balancing equilibrium. Bidding is a market-technique for task scheduling and load balancing in distributed systems
+that characterize a set of negotiation rules for users' jobs. For instance, Izakian et al~\cite{IzakianAL10} formulate a double auction mechanism for tasks-resources matching in grid computing environments where resources are considered as provider agents and users as consumer ones. Each entity participates in the network independently and makes autonomous decisions. A provider agent determines its bid price based on its current workload and each consumer agent defines its bid value based on two main parameters: the average remaining time and the remaining resources for bidding. Based on JADE simulator, the proposed algorithm exhibits better performances in terms of successful execution rates, resource utilization rates and fair profit allocation.
+
+
+Choi et al.~\cite{ChoiBH09} address the problem of robust task allocation in arbitrary networks. The proposed
+approaches combine a bidding approach for task selection and a consensus procedure scheme for
+decentralized conflict resolution. The developed algorithms are proven to converge to a conflict-free assignment in both single and multiple task assignment problem. An online stochastic dual gradient LB algorithm, which is called DGLB, is proposed in~\cite{chen2017dglb}. The authors deal with both workload and energy management for cloud networks consisting of multiple geo-distributed mapping nodes and data Centers. To enable online distributed implementation, tasks are decomposed both across time and space by leveraging a dual decomposition approach. Experimental results corroborate the merits of the proposed algorithm.
+
+
+In~\cite{tripathi2017non} a LB algorithm based on game theory is proposed for distributed data centers. The authors formulate the LB problem as a non-cooperative game among front-end proxy servers and characterize the structure of Nash equilibrium. Based on the obtained Nash equilibrium structure, they derive a LB algorithm to compute the Nash equilibrium. They show through simulations that the proposed algorithm ensures fairness among the users and a good average latency across all client regions. A hybrid task scheduling and load balancing dependent and independent tasks for master-slaves platforms are addressed in~\cite{liu2017dems}. To minimize the response time of the submitted jobs, the proposed algorithm which is called DeMS is split into three stages: i) communication overhead reduction between masters and slaves, ii) task migration to keep the workload balanced iii) and precedence task graphs partitioning.
+
+Several LB techniques, based on artificial intelligence, have also been proposed in the literature: genetic algorithm (GA) \cite{subrata2007artificial}, honey bee behavior \cite{krishna2013honey, kwok2004new}, tabu search \cite{subrata2007artificial} and fuzzy logic \cite{salimi2014task}. The main strength of these techniques comes from their ability to seek in large search spaces, which arises in many combinatorial optimization problems. For instance, the works in~\cite{cao2005grid, shen2014achieving} have proposed to tackle the load balancing problem using the multi-agent approach where each agent is responsible for the load balancing of a subset of nodes in the network. The objective of the agent is to minimize the jobs' response time and the host idle time dynamically. In~\cite{GrosuC05}, the authors formulate the load balancing problem as a non-cooperative game among users. They use the Nash equilibrium as the solution of this game to optimize the response time of all jobs in the entire system. The proposed scheme guarantees an optimal task allocation for each user with low time complexity. A game theoretic approach to tackle the static load balancing problem is also investigated in~\cite{PenmatsaC11}. To provide fairness to all users in the system, the load balancing problem is formulated as a non-cooperative game among the users to minimize the response time of the submitted users' jobs. As in~\cite{GrosuC05}, the authors use the concept of Nash equilibrium as the solution of a non-cooperative game. Simulation results show that the proposed scheme offers near optimal solutions compared to other existing techniques in terms of fairness.
+
\section{Bertsekas and Tsitsiklis' asynchronous load balancing algorithm}
\label{sec.bt-algo}
-In order prove the convergence of asynchronous iterative load balancing
-Bertsekas and Tsitsiklis proposed a model
-in~\cite{bertsekas+tsitsiklis.1997.parallel}. Here we recall some notations.
-Consider that $N={1,...,n}$ processors are connected through a network.
-Communication links are represented by a connected undirected graph $G=(N,V)$
-where $V$ is the set of links connecting different processors. In this work, we
-consider that processors are homogeneous for sake of simplicity. It is quite
-easy to tackle the heterogeneous case~\cite{ElsMonPre02}. Load of processor $i$
-at time $t$ is represented by $x_i(t)\geq 0$. Let $V(i)$ be the set of
-neighbors of processor $i$. Each processor $i$ has an estimate of the load of
-each of its neighbors $j \in V(i)$ represented by $x_j^i(t)$. According to
-asynchronism and communication delays, this estimate may be outdated. We also
-consider that the load is described by a continuous variable.
-
-When a processor send a part of its load to one or some of its neighbors, the
+In this section, a brief description of Bertsekas and Tsitsiklis' algorithm~\cite{bertsekas+tsitsiklis.1997.parallel} is given, using its original notations.
+A network is modeled as a connected undirected graph $G=(N,A)$, where $N$ is a set
+of processors and $A$ is a set of communication links. The processors are
+labeled $i = 1,...,n$, and a link between processors $i$ and
+$j$ is denoted by $(i, j)\in A$. The set of processor $i$'s neighbors is denoted by $V(i)$.
+
+The load of processor $i$
+at time $t$ is represented by $x_i(t)\geq 0$.
+Each processor $i$ has an estimate of the load of
+each of its neighbors $j \in V(i)$ denoted by $x_j^i(t)$. This estimate
+may be outdated due to %. According to
+asynchronism and communication delays.
+
+\medskip
+When a processor sends a part of its load to one or to some of its neighbors, the
transfer takes time to be completed. Let $s_{ij}(t)$ be the amount of load that
processor $i$ has transferred to processor $j$ at time $t$ and let $r_{ij}(t)$ be the
-amount of load received by processor $j$ from processor $i$ at time $t$. Then
+amount of load received by $j$ from $i$ at time $t$. Then
the amount of load of processor $i$ at time $t+1$ is given by:
+
\begin{equation}
x_i(t+1)=x_i(t)-\sum_{j\in V(i)} s_{ij}(t) + \sum_{j\in V(i)} r_{ji}(t)
\label{eq.ping-pong}
\end{equation}
-Some conditions are required to ensure the convergence. One of them can be
-called the \emph{ping-pong} condition which specifies that:
+%Some conditions are required to ensure the convergence. One of them can be
+%called the \emph{ping-pong} condition which specifies that:
+\medskip
+The asymptotic convergence is derived based on the {\it ping-pong} awareness condition which specifies that:
+
\begin{equation}
x_i(t)-\sum _{k\in V(i)} s_{ik}(t) \geq x_j^i(t)+s_{ij}(t)
\end{equation}
-for any processor $i$ and any $j \in V(i)$ such that $x_i(t)>x_j^i(t)$. This
-condition aims at avoiding a processor to send a part of its load and being
-less loaded after that.
+for any processor $i$ and any $j \in V(i)$ such that $x_i(t)>x_j^i(t)$.
+%This condition aims at avoiding a processor to send a part of its load and being
+%less loaded after that.
+
+\medskip
+This condition prohibits the possibility that two nodes keep sending loads to each
+other back and forth, without reaching equilibrium.
+
+\medskip
Nevertheless, we think that this condition may lead to deadlocks in some
-cases. For example, if we consider only three processors and that processor $1$
-is linked to processor $2$ which is also linked to processor $3$ (i.e. a simple
-chain which 3 processors). Now consider we have the following values at time $t$:
-\begin{eqnarray*}
-x_1(t)=10 \\
-x_2(t)=100 \\
-x_3(t)=99.99\\
- x_3^2(t)=99.99\\
-\end{eqnarray*}
-In this case, processor $2$ can either sends load to processor $1$ or processor
-$3$. If it sends load to processor $1$ it will not satisfy condition
-(\ref{eq.ping-pong}) because after the sending it will be less loaded that
-$x_3^2(t)$. So we consider that the \emph{ping-pong} condition is probably to
-strong. Currently, we did not try to make another convergence proof without this
-condition or with a weaker condition.
-
-Nevertheless, we conjecture that such a weaker condition exists. In fact, we
-have never seen any scenario that is not leading to convergence, even with
-load-balancing strategies that are not exactly fulfilling these two conditions.
-
-It may be the subject of future work to express weaker conditions, and to prove
-that they are sufficient to ensure the convergence of the load-balancing
-algorithm.
+cases. For example, let us consider a linear chain graph network of only three processors in which processor $1$
+is linked to processor $2$ which is also linked to processor $3$, but in which processors $1$ and $3$ are not neighbors.
+%(i.e. a simple chain which 3 processors).
+
+\noindent Now consider that we have the following load values at time~$t$:
+\begin{align*}
+ x_1(t) &= 10 \\
+ x_2(t) &= 100 \\
+ x_3(t) &= 99.99 \\
+ x_3^2(t) &= 99.99
+\end{align*}
+%{\bf RAPH, pourquoi il y a $x_3^2$?. Sinon il faudra reformuler la suite, c'est mal dit}
+
+Owing to the algorithm's specifications, processor $2$ can either send a part of its load to processor $1$ or to processor
+$3$. If it sends its load to processor $1$, it will not satisfy condition
+\eqref{eq.ping-pong} because after that sending it will be less loaded than
+$x_3^2(t)$. So we consider that the \emph{ping-pong} condition is probably too
+strong. %Currently, we did not try to make another convergence proof without this condition or with a weaker condition.
+
+\smallskip
+In spite of this, a weaker condition can be conjectured to exist since
+there does not seem to be any scenario that does not lead to convergence, even with
+load-balancing strategies that are not exactly fulfilling the authors' own conditions. %se two conditions.
+
+%It may be the subject of future work to express weaker conditions, and to prove
+%that they are sufficient to ensure the convergence of the load-balancing
+%algorithm.
+
+\smallskip
+
+Even though this approach is interesting, several practical
+questions arise when dealing with realistic models of
+computation and communication. As reported above, the
+algorithm's description is too succinct and no details are
+given on what is really sent and how the load balancing decisions
+are made. To our knowledge, the only first attempt for a possible
+implementation of this algorithm is investigated in~\cite{bahi+giersch+makhoul.2008.scalable} under the same conditions. Thus, in order to assess the performances
+of the new \besteffort{}, it seemed natural to compare it with this previous
+work. More precisely, algorithm~2 from
+\cite{bahi+giersch+makhoul.2008.scalable} will be used and, throughout the paper, will be
+referenced under the original name {\it Bertsekas and Tsitsiklis} for the sake of convenience and readability.
+
+\smallskip
+Here is an outline of the main principle of the borrowed algorithm. When a given node $i$ has to take
+a load balancing decision, it starts by sorting its neighbors by non-increasing
+order of their loads. Then, it computes the difference between its own load, and
+the load of each of its neighbors. Finally, taking the neighbors following the
+order defined before, the amount of load to send $s_{ij}$ is computed as
+$1/(|V(i)|+1)$ of the load difference%, with $n$ being the number of neighbors
+. This process is iterated as long as a node is more loaded than its considered
+neighbors.
+
\section{Best effort strategy}
\label{sec.besteffort}
-In this section we describe a new load-balancing strategy that we call
-\emph{best effort}. First, we explain the general idea behind this strategy,
-and then we describe some variants of this basic strategy.
+In this section, a new load-balancing strategy that is called
+\besteffort{} is described. First, the general idea behind this strategy is given,
+and then some variants of this basic strategy are presented.
\subsection{Basic strategy}
-
-The general idea behind the \emph{best effort} strategy is that each processor,
-that detects it has more load than some of its neighbors, sends some load to the
-most of its less loaded neighbors, doing its best to reach the equilibrium
-between those neighbors and himself.
-
-More precisely, when a processor $i$ is in its load-balancing phase,
-he proceeds as following.
+The description of our algorithm will be given from the point of view of a processor~$i$.
+The principle of the \besteffort{} strategy is that each processor
+detecting itself to be more loaded than some of its neighbors, sends part of its load to its less loaded neighbors, doing its best to reach the equilibrium
+between the involved neighbors and itself.
+
+More precisely, %when a processor $i$ is in its load-balancing phase,
+at each iteration of the load balancing process, processor~$i$
+ proceeds as follows.
\begin{enumerate}
\item First, the neighbors are sorted in non-decreasing order of their
known loads $x^i_j(t)$.
-\item Then, this sorted list is traversed in order to find its largest
- prefix such as the load of each selected neighbor is lesser than:
+\item Then, this sorted list is used to find its largest
+ prefix such as the load of each selected neighbor is smaller than:
\begin{itemize}
- \item the processor's own load, and
- \item the mean of the loads of the selected neighbors and of the
- processor's load.
+ \item the load of processor $i$, and
+ \item the mean of the loads of the selected neighbors and processor i.
\end{itemize}
- Let's call $S_i(t)$ the set of the selected neighbors, and
- $\bar{x}(t)$ the mean of the loads of the selected neighbors and of
- the processor load:
+ Let $S_i(t)$ be the set of the selected neighbors, and
+ $\bar{x}(t)$ be the mean of the loads between the selected neighbors and processor $i$ which is given as follows:
\begin{equation*}
\bar{x}(t) = \frac{1}{\abs{S_i(t)} + 1}
\left( x_i(t) + \sum_{j\in S_i(t)} x^i_j(t) \right)
\end{equation*}
- The following properties hold:
+ so that the following properties hold: %{\bf RAPH : la suite tombe du ciel :-)}
\begin{equation*}
\begin{cases}
S_i(t) \subset V(i) \\
\end{cases}
\end{equation*}
-\item Once this selection is completed, processor $i$ sends to each of
- the selected neighbor $j\in S_i(t)$ an amount of load $s_{ij}(t) =
+\item Once this selection is done, processor $i$ sends to each selected neighbor $j\in S_i(t)$ an amount of load $s_{ij}(t) =
\bar{x} - x^i_j(t)$.
- From the above equations, and notably from the definition of
- $\bar{x}$, it can easily be verified that:
+ %From the above equations, and notably from the definition of $\bar{x}$, it can easily be verified that:
+
+ \smallskip
+ In this way we obtain:
+
\begin{equation*}
\begin{cases}
x_i(t) - \sum_{j\in S_i(t)} s_{ij}(t) = \bar{x} \\
\end{equation*}
\end{enumerate}
-\subsection{Leveling the amount to send}
+
+
+\subsection{Leveling the amount of load to move}
With the aforementioned basic strategy, each node does its best to reach the
-equilibrium with its neighbors. Since each node may be taking the same kind of
-decision at the same moment, there is the risk that a node receives load from
-several of its neighbors, and then is temporary going off the equilibrium state.
+equilibrium with its neighbors. However, one question should be outlined here:
+how to handle the case where two (or more) node initiators might concurrently send
+ some loads to the same least loaded neighbor? Indeed,
+%since each node may take the same kind of decision at the same time,
+there is a risk that a node will receive loads from
+several of its neighbors, and then might temporary go off the equilibrium state.
This is particularly true with strongly connected applications.
-In order to reduce this effect, we add the ability to level the amount to send.
-The idea, here, is to make smaller steps toward the equilibrium, such that a
-potentially wrong decision has a lower impact.
-
-Concretely, once $s_{ij}$ has been evaluated as before, it is simply divided by
-some configurable factor. That's what we named the ``parameter $k$'' in
-Section~\ref{sec.results}. The amount of data to send is then $s_{ij}(t) =
-(\bar{x} - x^i_j(t))/k$.
-\FIXME[check that it's still named $k$ in Sec.~\ref{sec.results}]{}
-
-\section{Other strategies}
-\label{sec.other}
-
-Another load balancing strategy, working under the same conditions, was
-previously developed by Bahi, Giersch, and Makhoul in
-\cite{bahi+giersch+makhoul.2008.scalable}. In order to assess the performances
-of the new \emph{best effort}, we naturally chose to compare it to this anterior
-work. More precisely, we will use the algorithm~2 from
-\cite{bahi+giersch+makhoul.2008.scalable} and, in the following, we will
-reference it under the name of Makhoul's.
-
-Here is an outline of the Makhoul's algorithm. When a given node needs to take
-a load balancing decision, it starts by sorting its neighbors by increasing
-order of their load. Then, it computes the difference between its own load, and
-the load of each of its neighbors. Finally, taking the neighbors following the
-order defined before, the amount of load to send $s_{ij}$ is computed as
-$1/(N+1)$ of the load difference, with $N$ being the number of neighbors. This
-process continues as long as the node is more loaded than the considered
-neighbor.
+
+In order to reduce this effect, the ability to level the amount of load to send is added.
+The idea, here, is to make as few steps as possible toward the equilibrium, such that a
+potentially unsuitable decision pointed above has a lower impact on the local equilibrium.
+A weighting system parameter $k$ is introduced to orchestrate the right balance between the topology structure and the computation to communication ratios (CCR) values of the deployed application. Indeed, to speedup the convergence time of the load balancing process, one is faced with a difficult trade-off to choose an appropriate amount of load to send between node neighbors upon load imbalance detection. On the one hand, if $k$ is small, faster convergence times are expected for sparsely connected applications and large CCR values. On the other hand, for strongly connected applications and small CCR values, a large value of $k$ will enable us to better balance the load locally and therefore minimize the number of iterations toward the global equilibrium. In the experiments section (Section~\ref{sec.results}), it can be observed that choosing $k$ in 1,2 or 4, leads to good results for the considered CCR values and the targeted topology structures.
+So the amount of data to send is then $s_{ij}(t) = (\bar{x} - x^i_j(t))/k$.
+
+
+
+
\section{Virtual load}
\label{sec.virtual-load}
-In this section, we present the concept of \emph{virtual load}. In order to
-use this concept, load balancing messages must be sent using two different kinds
-of messages: load information messages and load balancing messages. More
-precisely, a node wanting to send a part of its load to one of its neighbors,
-can first send a load information message containing the load it will send and
-then it can send the load balancing message containing data to be transferred.
-Load information message are really short, consequently they will be received
-very quickly. In opposition, load balancing messages are often bigger and thus
+In this section, the new concept of \emph{virtual load} is presented. It aims at improving the global convergence time. For that purpose, both load transfer messages and load information messages are dissociated.
+More precisely, a node wanting to send some amount of its load to one (or more) of its neighbors
+can first send a load information message about the load it will send, and
+later it can send the load message containing data to be transferred.
+Load information messages are in fact short
+%, consequently they
+and will be received soon.
+%very quickly.
+In contrast, load transfer messages are often larger ones and thus
require more time to be transferred.
-The concept of \emph{virtual load} allows a node that received a load
-information message to integrate the load that it will receive later in its load
-(virtually) and consequently send a (real) part of its load to some of its
-neighbors. In fact, a node that receives a load information message knows that
-later it will receive the corresponding load balancing message containing the
-corresponding data. So if this node detects it is too loaded compared to some
-of its neighbors and if it has enough load (real load), then it can send more
-load to some of its neighbors without waiting the reception of the load
-balancing message.
+The concept of \emph{virtual load} allows a node receiving a load
+information message to integrate (virtually) the future load it will receive later in its load's list
+ even if the load has not been received yet. Consequently, the notified node can send a (real) part of its load to some of its
+neighbors when needed. By and large, this allows a node on the one hand, to predict the load it will receive in the subsequent time steps, and on the other hand, to make suitable decisions when detecting load imbalance in its closed neighborhoods. Doing so, faster convergence times are expected since nodes can take
+into account the information about the predictive loads even if these have not yet been received.
-Doing this, we can expect a faster convergence since nodes have a faster
-information of the load they will receive, so they can take in into account.
-\FIXME{Est ce qu'on donne l'algo avec virtual load?}
-\FIXME{describe integer mode}
-
-\section{Simulations}
+\section{Implementation with SimGrid and simulations}
\label{sec.simulations}
-In order to test and validate our approaches, we wrote a simulator
+In order to test and validate our approach, a simulator
using the SimGrid
-framework~\cite{casanova+legrand+quinson.2008.simgrid}. This
+framework~\cite{simgrid.web,casanova+giersch+legrand+al.2014.simgrid} was written. This
simulator, which consists of about 2,700 lines of C++, allows to run
the different load-balancing strategies under various parameters, such
as the initial distribution of load, the interconnection topology, the
characteristics of the running platform, etc. Then several metrics
-are issued that permit to compare the strategies.
+were considered to assess and compare the behavior of the different
+%are issued that permit to compare the
+strategies.
The simulation model is detailed in the next section (\ref{sec.model}), and the
experimental contexts are described in section~\ref{sec.exp-context}. Then the
\label{sec.model}
In the simulation model the processors exchange messages which are of
-two kinds. First, there are \emph{control messages} which only carry
-information that is exchanged between the processors, such as the
+two types. First, there are \emph{control messages} which only carry the information exchanged between processors, such as the
current load, or the virtual load transfers if this option is
-selected. These messages are rather small, and their size is
+considered. These messages are rather small, and their size is
constant. Then, there are \emph{data messages} that carry the real
-load transferred between the processors. The size of a data message
+load transferred between processors. The size of a data message
is a function of the amount of load that it carries, and it can be
pretty large. In order to receive the messages, each processor has
-two receiving channels, one for each kind of messages. Finally, when
-a message is sent or received, this is done by using the non-blocking
+two receiving channels, one for each type of messages. Finally, when
+a message is sent or received, this is done by using non-blocking
primitives of SimGrid\footnote{That are \texttt{MSG\_task\_isend()},
and \texttt{MSG\_task\_irecv()}.}.
During the simulation, each processor concurrently runs three threads:
a \emph{receiving thread}, a \emph{computing thread}, and a
-\emph{load-balancing thread}, which we will briefly describe now.
+\emph{load-balancing thread}, which will be briefly described hereafter.
For the sake of simplicity, a few details were voluntary omitted from
-these descriptions. For an exhaustive presentation, we refer to the
+these descriptions. For an exhaustive presentation, interested readers are referred to the
actual source code that was used for the experiments%
\footnote{As mentioned before, our simulator relies on the SimGrid
- framework~\cite{casanova+legrand+quinson.2008.simgrid}. For the
+ framework~\cite{casanova+giersch+legrand+al.2014.simgrid}. For the
experiments, we used a pre-release of SimGrid 3.7 (Git commit
67d62fca5bdee96f590c942b50021cdde5ce0c07, available from
- \url{https://gforge.inria.fr/scm/?group_id=12})}, and which is
+ \url{https://github.com/simgrid/simgrid})}, and which is
available at
\url{http://info.iut-bm.univ-fcomte.fr/staff/giersch/software/loba.tar.gz}.
\subsubsection{Receiving thread}
-The receiving thread is in charge of waiting for messages to come, either on the
+The receiving thread is in charge of waiting for incoming messages, either on the
control channel, or on the data channel. Its behavior is sketched by
Algorithm~\ref{algo.recv}. When a message is received, it is pushed in a buffer
-of received message, to be later consumed by one of the other threads. There
+of received messages, to be later consumed by one of the other threads. There
are two such buffers, one for the control messages, and one for the data
-messages. The buffers are implemented with a lock-free FIFO
-\cite{sutter.2008.writing} to avoid contention between the threads.
+messages.
+The buffers are implemented with first-in, first-out queues (FIFO).
\begin{algorithm}
\caption{Receiving thread}
\subsubsection{Computing thread}
-The computing thread is in charge of the real load management. As exposed in
+The computing thread is in charge of the real load management. As outlined in
Algorithm~\ref{algo.comp}, it iteratively runs the following operations:
\begin{itemize}
\item if some load was received from the neighbors, get it;
\item if there is some load to send to the neighbors, send it;
-\item run some computation, whose duration is function of the current
- load of the processor.
+\item run some computations, whose duration is a function of the processor's current
+ load.
\end{itemize}
Practically, after the computation, the computing thread waits for a
small amount of time if the iterations are looping too fast (for
\subsubsection{Load-balancing thread}
The load-balancing thread is in charge of running the load-balancing algorithm,
-and exchange the control messages. As shown in Algorithm~\ref{algo.lb}, it
+and exchanging the control messages. As shown in Algorithm~\ref{algo.lb}, it
iteratively runs the following operations:
\begin{itemize}
\item get the control messages that were received from the neighbors;
\item run the load-balancing algorithm;
-\item send control messages to the neighbors, to inform them of the
- processor's current load, and possibly of virtual load transfers;
-\item wait a minimum (configurable) amount of time, to avoid to
- iterate too fast.
+\item send control messages to the neighbors, to inform them about the
+ processor's current load, and possibly the future virtual load transfers;
+\item wait a minimum (configurable) amount of time, to avoid iterating too fast.
\end{itemize}
\begin{algorithm}
}
\end{algorithm}
-\paragraph{}\FIXME{ajouter des détails sur la gestion de la charge virtuelle ?
- par ex, donner l'idée générale de l'implémentation. l'idée générale est déja
- décrite en section~\ref{sec.virtual-load}}
+%\paragraph{}\FIXME{ajouter des détails sur la gestion de la charge virtuelle ?
+% par ex, donner l'idée générale de l'implémentation. l'idée générale est déja
+% décrite en section~\ref{sec.virtual-load}}
\subsection{Experimental contexts}
\label{sec.exp-context}
-In order to assess the performances of our algorithms, we ran our
-simulator with various parameters, and extracted several metrics, that
-we will describe in this section.
+In order to assess the performances of our algorithm, simulations with various parameters have been achieved out, and several metrics are described in this section.
\subsubsection{Load balancing strategies}
-Several load balancing strategies were compared. We ran the experiments with
-the \emph{Best effort}, and with the \emph{Makhoul} strategies. \emph{Best
- effort} was tested with parameter $k = 1$, $k = 2$, and $k = 4$. Secondly,
+Several load balancing strategies were compared. Experiments with
+the \besteffort{}, and with the \makhoul{} strategies have been compared. First the \emph{best
+ effort} was tested with parameter $k = 1$, $k = 2$, and $k = 4$. Then,
each strategy was run in its two variants: with, and without the management of
-\emph{virtual load}. Finally, we tested each configuration with \emph{real},
-and with \emph{integer} load.
+\emph{virtual load}. Finally, each configuration with \emph{real},
+and with \emph{integer} load values was considered.
To summarize the different load balancing strategies, we have:
\begin{description}
-\item[\textbf{strategies:}] \emph{Makhoul}, or \emph{Best effort} with $k\in
+\item[\textbf{strategies:}] \makhoul{}, or \besteffort{} with $k\in
\{1,2,4\}$
-\item[\textbf{variants:}] with, or without virtual load
-\item[\textbf{domain:}] real load, or integer load
+\item[\textbf{variants:}] with, or without virtual loads
+%\item[\textbf{domain:}] real load, or integer load
\end{description}
-%
-This gives us as many as $4\times 2\times 2 = 16$ different strategies.
\subsubsection{End of the simulation}
-The simulations were run until the load was nearly balanced among the
-participating nodes. More precisely the simulation stops when each node holds
-an amount of load at less than 1\% of the load average, during an arbitrary
-number of computing iterations (2000 in our case).
+The simulations were run until the global equilibrium threshold was reached.
+
+More precisely, the simulation stops when each node holds
+an amount of load at least inferior to 1\% of the load average.
-Note that this convergence detection was implemented in a centralized manner.
-This is easy to do within the simulator, but it's obviously not realistic. In a
-real application we would have chosen a decentralized convergence detection
-algorithm, like the one described by Bahi, Contassot-Vivier, Couturier, and
-Vernier in \cite{10.1109/TPDS.2005.2}.
+\subsubsection{Platform}
-\subsubsection{Platforms}
-In order to show the behavior of the different strategies in different
-settings, we simulated the executions on two sorts of platforms. These two
-sorts of platforms differ by their underlaid network topology. On the one hand,
-we have homogeneous platforms, modeled as a cluster. On the other hand, we have
-heterogeneous platforms, modeled as the interconnection of a number of clusters.
-
-The clusters were modeled by a fixed number of computing nodes interconnected
-through a backbone link. Each computing node has a computing power of
-1~GFlop/s, and is connected to the backbone by a network link whose bandwidth is
-of 125~MB/s, with a latency of 50~$\mu$s. The backbone has a network bandwidth
-of 2.25~GB/s, with a latency of 500~$\mu$s.
-
-The heterogeneous platform descriptions were created by taking a subset of the
+In order to make our experiments, an heterogeneous grid platform description was created by taking a subset of the
Grid'5000 infrastructure\footnote{Grid'5000 is a French large scale experimental
Grid (see \url{https://www.grid5000.fr/}).}, as described in the platform file
\texttt{g5k.xml} distributed with SimGrid. Note that the heterogeneity of the
-platform here only comes from the network topology. Indeed, since our
-algorithms currently do not handle heterogeneous computing resources, the
-processor speeds were normalized, and we arbitrarily chose to fix them to
-1~GFlop/s.
-
-Then we derived each sort of platform with four different number of computing
-nodes: 16, 64, 256, and 1024 nodes.
+platform here only comes from the network topology. Indeed,
+processors are considered to be homogeneous for the sake of simplicity.
+However, this situation is easily extendable to the case of heterogeneous platforms
+by scaling the processor's load by its computing power~\cite{ElsMonPre02}.
+%since our
+%algorithms currently do not handle heterogeneous computing resources,
+ The
+processor speeds were normalized, and we arbitrarily chose to fix them at
+1~GFlop/s. Each type of platform with four different numbers of computing
+nodes: 16, 64, 256, and 1024 nodes is built in a similar way.
\subsubsection{Configurations}
The distributed processes of the application were then logically organized along
-three possible topologies: a line, a torus or an hypercube. We ran tests where
-the total load was initially on an only node (at one end for the line topology),
-and other tests where the load was initially randomly distributed across all the
-participating nodes. The total amount of load was fixed to a number of load
-units equal to 1000 times the number of node. The average load is then of 1000
+three possible typologies: a line, a torus or an hypercube. Tests were divided into two groups on the basis of the initial distribution of the global load: i) some tests were performed with the total load initially on only one node, ii) and other tests were performed for which the load was initially randomly distributed across all the
+participating nodes of the platform. The total amount of load was fixed to a number of load
+units equal to 1,000 times the number of node. The average load is then of 1,000
load units.
-For each of the preceding configuration, we finally had to choose the
-computation and communication costs of a load unit. We chose them, such as to
-have three different computation over communication cost ratios, and hence model
-three different kinds of applications:
+For all the previous configurations, the
+computation and communication costs of a load unit are defined. They were chosen so as to
+have two different CCR, and hence characterize
+two different types of applications:
\begin{itemize}
-\item mainly communicating, with a computation/communication cost ratio of $1/10$;
-\item mainly computing, with a computation/communication cost ratio of $10/1$ ;
-\item balanced, with a computation/communication cost ratio of $1/1$.
+\item mainly communicating, with a CCR of $1/10$;
+\item mainly computing, with a CCR of $10/1$.
+%\item balanced, with a computation/communication cost ratio of $1/1$.
\end{itemize}
-To summarize the various configurations, we have:
-\begin{description}
-\item[\textbf{platforms:}] homogeneous (cluster), or heterogeneous (subset of
- Grid'5000)
-\item[\textbf{platform sizes:}] platforms with 16, 64, 256, or 1024 nodes
-\item[\textbf{process topologies:}] line, torus, or hypercube
-\item[\textbf{initial load distribution:}] initially on a only node, or
- initially randomly distributed over all nodes
-\item[\textbf{computation/communication cost ratio:}] $10/1$, $1/1$, or $1/10$
-\end{description}
-%
-This gives us as many as $2\times 4\times 3\times 2\times 3 = 144$ different
-configurations.
-%
-Combined with the various load balancing strategies, we had $16\times 144 =
-2304$ distinct settings to evaluate. In fact, as it will be shown later, we
-didn't run all the strategies, nor all the configurations for the bigger
-platforms with 1024 nodes, since to simulations would have run for a too long
-time.
-
-Anyway, all these the experiments represent more than 240 hours of computing
-time.
\subsubsection{Metrics}
+\label{sec.metrics}
-In order to evaluate and compare the different load balancing strategies we had
-to define several metrics. Our goal, when choosing these metrics, was to have
-something tending to a constant value, i.e. to have a measure which is not
-changing anymore once the convergence state is reached. Moreover, we wanted to
-have some normalized value, in order to be able to compare them across different
-settings.
-
-With these constraints in mind, we defined the following metrics:
+In order to evaluate and compare the different load balancing strategies, several metrics were considered. Our goal, when choosing these metrics, is to have
+something tending to a constant value, i.e. to have a measure which does not
+change once the convergence state is reached. Moreover, the goal is to
+have some normalized values, in order to be able to compare them across different
+settings. With these constraints in mind, the following metrics are defined:
%
\begin{description}
-\item[\textbf{average idle time:}] that's the total time spent, when the nodes
- don't hold any share of load, and thus have nothing to compute. This total
- time is divided by the number of participating nodes, such as to have a number
- that can be compared between simulations of different sizes.
+\item[\it{average idle time:}] that is the total time spent, when the nodes
+ do not hold any share of load, and thus have nothing to compute.
+ A smaller value is better.
- This metric is expected to give an idea of the ability of the strategy to
- diffuse the load quickly. A smaller value is better.
+\item[\it{average convergence time:}] that is the average of the times when
+ all nodes reached the final balanced load distribution. Times are measured as a number
+ of (simulated) seconds from the beginning of the simulation.
-\item[\textbf{average convergence date:}] that's the average of the dates when
- all nodes reached the convergence state. The dates are measured as a number
- of (simulated) seconds since the beginning of the simulation.
+\item[\it{maximum convergence time:}] that is the time when the last node
+ reached the final stable equilibrium. A smaller value is better.
-\item[\textbf{maximum convergence date:}] that's the date when the last node
- reached the convergence state.
- These two dates give an idea of the time needed by the strategy to reach the
- equilibrium state. A smaller value is better.
-
-\item[\textbf{data transfer amount:}] that's the sum of the amount of all data
- transfers during the simulation. This sum is then normalized by dividing it
- by the total amount of data present in the system.
-
- This metric is expected to give an idea of the efficiency of the strategy in
- terms of data movements, i.e. its ability to reach the equilibrium with fewer
- transfers. Again, a smaller value is better.
\end{description}
\subsection{Experimental results}
\label{sec.results}
-In this section, the results for the different simulations will be presented,
-and we'll try to explain our observations.
-
-\subsubsection{Cluster vs grid platforms}
-
-As mentioned earlier, we simulated the different algorithms on two kinds of
-physical platforms: clusters and grids. A first observation that we can make,
-is that the graphs we draw from the data have a similar aspect for the two kinds
-of platforms. The only noticeable difference is that the algorithms need a bit
-more time to achieve the convergence on the grid platforms, than on clusters.
-Nevertheless their relative performances remain generally identical.
+In this section, the results for the different simulations are presented,
+and our observations are explained.
-This suggests that the relative performances of the different strategies are not
-influenced by the characteristics of the physical platform. The differences in
-the convergence times can be explained by the fact that on the grid platforms,
-distant sites are interconnected by links of smaller bandwith.
-Therefore, in the following, we'll only discuss the results for the grid
-platforms.
\subsubsection{Main results}
\includegraphics[width=.5\linewidth]{data/graphs/R1-1:10-grid-torus}
\includegraphics[width=.5\linewidth]{data/graphs/R1-10:1-grid-hcube}%
\includegraphics[width=.5\linewidth]{data/graphs/R1-1:10-grid-hcube}
- \caption{Real mode, initially on an only mode, comp/comm cost ratio = $10/1$ (left), or $1/10$ (right).}
+ \caption{Real mode, initially on an only mode, CCR = $10/1$ (left), or $1/10$ (right). For each bar, from bottom to top starting at $t=0$, the first part represents the average idle
+time, the second part represents the average convergence time, and then the third part represents the maximum convergence time.}
\label{fig.results1}
\end{figure*}
\includegraphics[width=.5\linewidth]{data/graphs/RN-1:10-grid-torus}
\includegraphics[width=.5\linewidth]{data/graphs/RN-10:1-grid-hcube}%
\includegraphics[width=.5\linewidth]{data/graphs/RN-1:10-grid-hcube}
- \caption{Real mode, random initial distribution, comp/comm cost ratio = $10/1$ (left), or $1/10$ (right).}
+ \caption{Real mode, random initial distribution, CCR = $10/1$ (left), or $1/10$ (right).}
\label{fig.resultsN}
\end{figure*}
-The main results for our simulations on grid platforms are presented on the
-figures~\ref{fig.results1} and~\ref{fig.resultsN}.
+The main results for our simulations on grid platforms are presented in Figures~\ref{fig.results1} and~\ref{fig.resultsN}.
%
-The results on figure~\ref{fig.results1} are when the load to balance is
-initially on an only node, while the results on figure~\ref{fig.resultsN} are
-when the load to balance is initially randomly distributed over all nodes.
-
-On both figures, the computation/communication cost ratio is $10/1$ on the left
-column, and $1/10$ on the right column. With a computatio/communication cost
-ratio of $1/1$ the results are just between these two extrema, and definitely
-don't give additional information, so we chose not to show them here.
-
-On each of the figures~\ref{fig.results1} and~\ref{fig.resultsN}, the results
+The results in Figure~\ref{fig.results1} are when the load to balance is
+initially on only one node, while the results in Figure~\ref{fig.resultsN} are
+when the load to balance is initially randomly distributed over all nodes.
+In both figures, the CCR is $10/1$ on the left
+column, and $1/10$ on the right column.
+In each Figure, \ref{fig.results1} and~\ref{fig.resultsN}, the results
are given for the process topology being, from top to bottom, a line, a torus or
an hypercube.
-\FIXME{explain how to read the graphs}
+Finally, the vertical bars show the measured times for the evaluated metrics. These measured times are, starting at $t=0$ and from bottom to top, the average idle
+time, the average convergence time, and the maximum convergence time (see
+Section~\ref{sec.metrics}). The measurements are repeated for the different
+platform sizes. Some bars are missing, especially for large platforms. This is
+because the algorithm did not manage to reach the convergence state in the
+allocated time.
-each bar -> times for an algorithm
-recall the different times
-no bar -> not run or did not converge in allocated time
-repeated for the different platform sizes.
-\FIXME{donner les premières conclusions, annoncer le plan de la suite}
+\subsubsection{The \besteffort{} and \makhoul{} strategies without virtual load}
-\subsubsection{With the virtual load extension}
+The {\it simple} ({\it plain}) version of each strategy is defined as the load balancing
+algorithm without virtual load's transfers. For each strategy, we compare the simple
+version (without virtual load) and the improved one (with virtual load).
+Each algorithm is evaluated in terms of achieved idle time and convergence time.
-\subsubsection{The $k$ parameter}
+Before looking at the different variations, we will first show that the simple
+\besteffort{} strategy is valuable, and may be as good as the \makhoul{}
+strategy. In Figures~\ref{fig.results1} and~\ref{fig.resultsN},
+these strategies are respectively labeled ``b'' and ``a''.
-\subsubsection{With an initial random repartition, and larger platforms}
+We can see that the relative performance of these strategies is mainly
+influenced by the application topology structure. It is for the line topology that the
+difference is the most important. In this case, the \besteffort{} strategy is
+really faster than the \makhoul{} strategy. This can be explained by the
+fact that the \besteffort{} strategy tries to distribute the load fairly between
+all the nodes and is in a good agreement with the line topology since it is easy
+to load balance the load efficiently.
-\subsubsection{With integer load}
+In contrast, for the hypercube topology, the \besteffort{}' performances are lower than
+the \makhoul{} strategy. In this case, the \makhoul{} strategy, which
+tries to give more load to a small number of neighbors, reaches the equilibrium faster.
-\FIXME{what about the amount of data?}
+For the torus topology, for which the number of links is between the line and
+the hypercube, the \makhoul{} strategy is slightly better but the difference is
+more nuanced when the initial load is only on one node. The only case where the
+\makhoul{} strategy is really faster than the \besteffort{} strategy is with the
+random initial distribution when communications are slow.
-\begin{itshape}
-\FIXME{remove that part}
-Dans cet ordre:
-...
-- comparer be/makhoul -> be tient la route
- -> en réel uniquement
-- valider l'extension virtual load -> c'est 'achement bien
-- proposer le -k -> ça peut aider dans certains cas
-- conclure avec la version entière -> on n'a pas l'effet d'escalier !
-Q: comment inclure les types/tailles de platesformes ?
-Q: comment faire des moyennes ?
-Q: comment introduire les distrib 1/N ?
-...
+Generally speaking, the number of interconnection is very important. Indeed, the more
+numerous the interconnection links are, the faster the \makhoul{} strategy is because
+it quickly distributes significant amount of load, even if the distribution may be unfair, between
+all neighbors. However, the \besteffort{} strategy distributes the
+load fairly when needed and is better for sparse connected applications.
-On constate quoi (vérifier avec les chiffres)?
-\begin{itemize}
-\item cluster ou grid, entier ou réel, ne font pas de grosses différences
-\item bookkeeping? améliore souvent les choses, parfois au prix d'un retard au démarrage
-\item makhoul? se fait battre sur les grosses plateformes
-\item taille de plateforme?
-\item ratio comp/comm?
+\subsubsection{With virtual load}
-\item option $k$? peut-être intéressant sur des plateformes fortement interconnectées (hypercube)
+The impact of virtual load schemes is, most of the time, really significant compared to
+the simple version of the algorithm with the same configuration.
+For instance, as can be seen from Figure~\ref{fig.results1}, when the load is initially on one node, it can be
+noticed that the average idle times are generally longer with the virtual load
+than the simple version. This can be explained by the fact that, with a virtual load,
+processors will exchange all the load they need to exchange as soon as the
+virtual load has been balanced between all the processors. As a consequence, they
+cannot compute from the beginning. This is especially noticeable when the
+communication are slow (on the left part of Figure ~\ref{fig.results1}).
-\item volume de comm? souvent, besteffort/plain en fait plus. pourquoi?
+\smallskip
+When the load to balance is initially randomly distributed over all nodes, we can see from Figure \ref{fig.resultsN} that the effect of virtual load is not significant for the line topology structure. However, for both torus and hypercube structures with CCR = 1/10 (on the left of the figure), the performance of virtual load transfers is significantly better. This is explained by the fact
+that for small CCR values, high communication costs play quite a significant role. Moreover, the impact of
+communication becomes less important as the CCR values increase, since larger CCR values result in smaller communication times. The impact of CCR values were also tested on the performance of each algorithm in terms of idle times. From Figures~\ref{fig.results1} and ~\ref{fig.resultsN}, virtual load schemes can be seen to achieve really good average idle times, which is quite close to both its own simple version and its direct competitor {\it Bertsekas and Tsitsiklis} algorithm. As expected, for coarse grain applications (CCR =10/1), idle times are close to 0 since processors are inactive most of the time compared to fine grain applications.
-\item répartition initiale de la charge ?
+\smallskip
+Taken as a whole, the results illustrated in Figures~\ref{fig.results1} and ~\ref{fig.resultsN} clearly show that our proposal outperforms the Bertsekas and Tsitsiklis algorithm.
+These results indicate that local load balancing decisions have a significant impact on the global
+convergence time achieved by the compared strategies. This is because, upon load imbalance detection, assigning an amount of load in an unfair way between neighbors will severely increase the total number of iterations required by the algorithm before reaching the final stable distributions. The reason of the poorer performance of the {\it Bertsekas and Tsitsiklis} algorithm can be explained by the inconvenience of the iterative load balance policy adopted for load distribution between neighbors. Neighbors are selected in such a way that the {\it ping-pong} condition holds. Therefore, loads are not really assigned to neighboring processors which would allow them to be fairly balanced.
-\item integer mode sur topo. line n'a jamais fini en plain? vérifier si ce n'est
- pas à cause de l'effet d'escalier que bk est capable de gommer.
+\smallskip
+Unlike the {\it Bertsekas and Tsitsiklis} algorithm, our approach is not really sensitive when dealing with realistic models of computation and communication. This is due to two main features: i) the use of "virtual load" transfers which allows nodes to predict the load they receive in the subsequent iterations steps, ii) and the greedy neighbors selection adopted by our algorithm at each time step in the load balancing process. The involved neighbors are selected in such a way that the load difference between the computational resources is minimized as much as possible.
-\end{itemize}
+\smallskip
+Comparing the results of the extended version (with virtual load) to the results of the simple one, it can be observed in Figs.~\ref{fig.results1} and ~\ref{fig.resultsN} that the improved version gives the best performances. It always improves both convergence and idle times significantly in all figures. This is because, with virtual load transfers, the algorithm seeks greedily to ensure a certain degree of load balancing for processors by taking into account the information about the predictive loads not received yet. Consequently, this leads to optimizing the final convergence time of the load balancing process. Similarly, the extended version achieves much better results than the simple one when considering larger platforms, as shown in Figs.~\ref{fig.results1} and ~\ref{fig.resultsN}.
-% On veut montrer quoi ? :
+\smallskip
+We also find in Figs.~\ref{fig.results1} and ~\ref{fig.resultsN} that the performance difference between the improved version of our proposal and its simple version (without virtual load) increases when the CCR increases. This interesting result comes from the fact that larger CCR values reveal that we are dealing with intensive computations applications in grid platforms. Thus, in order to reduce the convergence time of the load balancing for such applications, it is important to make suitable decisions upon local load imbalance detection. That is why we added {\it virtual load} transfers scheme to the {\it best effort} strategy to perfectly balance the load of processors at each step of the load balancing process.
-% 1) best plus rapide que les autres (simple, makhoul)
-% 2) avantage virtual load
+\smallskip
+Finally, it is worth noting from Figures~\ref{fig.results1} and ~\ref{fig.resultsN}, that the algorithm's convergence time increases together with the size of the network. We also see that the idle time increases together with the size of the network when a load is initially on a single node (Figure~\ref{fig.results1}),
+as expected. In addition, it is interesting to note that when the number of nodes increases, there is no substantial difference in the increase of the convergence time, compared to the simple version without virtual load. This is explained by the fact that the increase in the convergence time is already absorbed by the virtual load transfers between processors being in line with the network's size.
-% Est ce qu'on peut trouver des contre exemple?
-% Topologies variées
-% Simulation avec temps définies assez long et on mesure la qualité avec : volume de calcul effectué, volume de données échangées
-% Mais aussi simulation avec temps court qui montre que seul best converge
+\subsubsection{The $k$ parameter}
+\label{results-k}
-% Expés avec ratio calcul/comm rapide et lent
+As explained previously when the communication are slow the \besteffort{}
+strategy is efficient. This is due to the fact that it tries to balance the load
+fairly and consequently a significant amount of the load is transferred between
+processors. In this case, it is possible to reduce the convergence time by
+using the leveler parameter (parameter $k$). The advantage of using this
+solution is particularly true when the initial load is randomly distributed
+on the nodes with torus and hypercube topologies and slow communication. When
+a virtual load scheme is used, the effect of this parameter is also perceptible
+in the same conditions.
-% Quelques expés avec charge initiale aléatoire plutot que sur le premier proc
-% Cadre processeurs homogènes
-% Topologies statiques
-% On ne tient pas compte de la vitesse des liens donc on la considère homogène
+\subsubsection{With non negative integer load values}
+In addition to the first tests devoted to the case of non negative real load values, further experiments were also carried with integer load values to assess the performance of our proposal.
+As expected, the obtained results globally have the same behavior, that is why similar figures do not appear in this paper. The most
+interesting result is that the virtual mode allows
+processors in a line topology to converge to the uniform load balancing state. Without
+the virtual load, most of the time, processors converge to what is called the
+``stairway effect'', that is to say that there is only a difference of at most one unit load between any pairs of neighbor nodes, i.e. the load difference between each processor and its neighbors is within one unit load (for example with 10 processors, we
+obtain 10 9 8 7 6 6 7 8 9 10 instead of 8 8 8 8 8 8 8 8 8 8).
-% Prendre un réseau hétérogène et rendre processeur homogène
+\smallskip
+To summarize, the simulation results led us to show that, with a few exceptions (without virtual load), our proposal is superior to the {\it Bertsekas and Tsitsiklis} algorithm in all the tested scenarios. The illustrated results indicate that network size, CCR values and initial load distribution have a significant impact on the algorithm's performances. Thus, this experimental study corroborates the usefulness of our algorithm, and confirms that when dealing with realistic model platforms, both {\it best effort} strategy and {\it virtual load} transfers play an important role on the achieved idle and convergence times.
-% Taille : 10 100 très gros
-\end{itshape}
-\section{Conclusion and perspectives}
-\FIXME{conclude!}
+\section{Conclusion}
+\label{conclusions-remarks}
-\section*{Acknowledgements}
+In this paper, a new asynchronous load balancing algorithm for non negative real numbers
+of divisible loads in distributed systems was presented. The proposed algorithm, which is called {\it best effort strategy},
+seeks greedily for loads imbalance detection and tries to achieve efficient local load equilibrium
+between neighbors. Our proposal is based on {\it a clairvoyant virtual loads' transfer} scheme which allows nodes to predict the future loads they will receive in the subsequent iterations.
+This leads to a noticeable speedup of the global convergence time of the load balancing process.
+Based on SimGrid simulator, it was shown that, when dealing with realistic models of computation and communication, our algorithm exhibits better performances than its direct competitor from the literature. This makes it a viable choice for load balancing of both non negative real and integer divisible loads in distributed computing systems. % un peu gonflé peut être pour la dernière phrase.
-Computations have been performed on the supercomputer facilities of the
-Mésocentre de calcul de Franche-Comté.
+\section*{Acknowledgments}
+This paper is partially funded by the Labex ACTION program (contract
+ANR-11-LABX-01-01). We also thank the supercomputer facilities of the Mésocentre de calcul de Franche-Comté.
+
\bibliographystyle{elsarticle-num}
\bibliography{biblio}
-\FIXME{find and add more references}
+
\end{document}
-%%% Local Variables:
-%%% mode: latex
-%%% TeX-master: t
-%%% fill-column: 80
-%%% ispell-local-dictionary: "american"
-%%% End:
-
-% LocalWords: Raphaël Couturier Arnaud Giersch Abderrahmane Sider Franche ij
-% LocalWords: Bertsekas Tsitsiklis SimGrid DASUD Comté Béjaïa asynchronism ji
-% LocalWords: ik isend irecv Cortés et al chan ctrl fifo Makhoul GFlop xml pre
-% LocalWords: FEMTO Makhoul's fca bdee cdde Contassot Vivier underlaid
+
