\begin{document}
-\title{Energy Consumption Reduction for Message Passing Iterative Applications in Heterogeneous Architecture Using DVFS}
+\title{Energy Consumption Reduction with DVFS for \\
+ Message Passing Iterative Applications on \\
+ Heterogeneous Architectures}
\author{%
\IEEEauthorblockN{%
Arnaud Giersch
}
\IEEEauthorblockA{%
- FEMTO-ST Institute, University of Franche-Comte\\
+ FEMTO-ST Institute, University of Franche-Comté\\
IUT de Belfort-Montbéliard,
19 avenue du Maréchal Juin, BP 527, 90016 Belfort cedex, France\\
% Telephone: \mbox{+33 3 84 58 77 86}, % Raphaël
number of nodes composing them. To minimize the operating costs of these
platforms many techniques have been used. Dynamic voltage and frequency
scaling (DVFS) is one of them. It reduces the frequency of a CPU to lower its
- energy consumption. However, lowering the frequency of a CPU might increase
+ energy consumption. However, lowering the frequency of a CPU may increase
the execution time of an application running on that processor. Therefore,
the frequency that gives the best trade-off between the energy consumption and
the performance of an application must be selected.
The need for more computing power is continually increasing. To partially
satisfy this need, most supercomputers constructors just put more computing
-nodes in their platform. The resulting platforms might achieve higher floating
+nodes in their platform. The resulting platforms may achieve higher floating
point operations per second (FLOPS), but the energy consumption and the heat
dissipation are also increased. As an example, the Chinese supercomputer
Tianhe-2 had the highest FLOPS in November 2014 according to the Top500 list
\dots{} DVFS is a widely used process to reduce the energy consumption of a
processor by lowering its frequency
\cite{Rizvandi_Some.Observations.on.Optimal.Frequency}. However, it also reduces
-the number of FLOPS executed by the processor which might increase the execution
+the number of FLOPS executed by the processor which may increase the execution
time of the application running over that processor. Therefore, researchers use
different optimization strategies to select the frequency that gives the best
trade-off between the energy reduction and performance degradation ratio. In
DVFS is a technique used in modern processors to scale down both the voltage and
the frequency of the CPU while computing, in order to reduce the energy
consumption of the processor. DVFS is also allowed in GPUs to achieve the same
-goal. Reducing the frequency of a processor lowers its number of FLOPS and might
+goal. Reducing the frequency of a processor lowers its number of FLOPS and may
degrade the performance of the application running on that processor, especially
if it is compute bound. Therefore selecting the appropriate frequency for a
processor to satisfy some objectives while taking into account all the
strategies to tackle this problem. Some of them developed online methods that
compute the new frequency while executing the application, such
as~\cite{Hao_Learning.based.DVFS,Spiliopoulos_Green.governors.Adaptive.DVFS}.
-Others used offline methods that might need to run the application and profile
+Others used offline methods that may need to run the application and profile
it before selecting the new frequency, such
as~\cite{Rountree_Bounding.energy.consumption.in.MPI,Cochran_Pack_and_Cap_Adaptive_DVFS}.
The methods could be heuristics, exact or brute force methods that satisfy
The overall execution time of a distributed iterative synchronous application
over a heterogeneous platform consists of the sum of the computation time and
the communication time for every iteration on a node. However, due to the
-heterogeneous computation power of the computing nodes, slack times might occur
+heterogeneous computation power of the computing nodes, slack times may occur
when fast nodes have to wait, during synchronous communications, for the slower
nodes to finish their computations (see Figure~\ref{fig:heter}). Therefore, the
overall execution time of the program is the execution time of the slowest task
modern processors, that reduces the energy consumption of a CPU by scaling
down its voltage and frequency. Since DVFS lowers the frequency of a CPU
and consequently its computing power, the execution time of a program running
-over that scaled down processor might increase, especially if the program is
+over that scaled down processor may increase, especially if the program is
compute bound. The frequency reduction process can be expressed by the scaling
factor S which is the ratio between the maximum and the new frequency of a CPU
as in (\ref{eq:s}).
\Es = \Ps \cdot (\Tcp \cdot S + \Tcm)
\end{equation}
-In the considered heterogeneous platform, each processor $i$ might have
+In the considered heterogeneous platform, each processor $i$ may have
different dynamic and static powers, noted as $\Pd[i]$ and $\Ps[i]$
respectively. Therefore, even if the distributed message passing iterative
application is load balanced, the computation time of each CPU $i$ noted
-$\Tcp[i]$ might be different and different frequency scaling factors might be
+$\Tcp[i]$ may be different and different frequency scaling factors may be
computed in order to decrease the overall energy consumption of the application
and reduce slack times. The communication time of a processor $i$ is noted as
$\Tcm[i]$ and could contain slack times when communicating with slower nodes,
computing power (which corresponds to \np[\%]{80} of its dynamic power and the
remaining \np[\%]{20} to the static power), the same assumption was made in
\cite{Our_first_paper,Rauber_Analytical.Modeling.for.Energy}. Finally, These
-nodes were connected via an Ethernet network with 1 Gbit/s bandwidth.
+nodes were connected via an Ethernet network with \np[Gbit/s]{1} bandwidth.
\subsection{The experimental results of the scaling algorithm}
\hline
MG & 3.27 & 1534.70 & 29.27 & 14.35 & 14.92 \\
\hline
- EP & 5.05 & 5471.1084 & 27.12 & 3.11 & 24.01 \\
+ EP & 5.05 & 5471.11 & 27.12 & 3.11 & 24.01 \\
\hline
LU & 73.92 & 101339.16 & 21.96 & 3.67 & 18.29 \\
\hline
can also be noticed that for the benchmarks EP and SP that contain little or no
communications, the energy savings are not significantly affected by the high
number of nodes. No experiments were conducted using bigger classes than D,
-because they require a lot of memory (more than 64GB) when being executed by the
-simulator on one machine. The maximum distance between the normalized energy
-curve and the normalized performance for each instance is also shown in the
-result tables. It decrease in the same way as the energy saving percentage. The
-tables also show that the performance degradation percentage is not
+because they require a lot of memory (more than \np[GB]{64}) when being executed
+by the simulator on one machine. The maximum distance between the normalized
+energy curve and the normalized performance for each instance is also shown in
+the result tables. It decrease in the same way as the energy saving percentage.
+The tables also show that the performance degradation percentage is not
significantly increased when the number of computing nodes is increased because
the computation times are small when compared to the communication times.
\hline
CG & 2812.38 & 36.36 & 6.80 & 29.56 \\
\hline
- MG & 825.427 & 38.35 & 6.41 & 31.94 \\
+ MG & 825.43 & 38.35 & 6.41 & 31.94 \\
\hline
EP & 5281.62 & 35.02 & 2.68 & 32.34 \\
\hline
\hline
MG & 29.49 & 33.78 & 3.74 & 6.41 & 25.75 & 27.37 \\
\hline
- LU & 19.55 & 28.33 & 0.0 & 0.01 & 19.55 & 28.22 \\
+ LU & 19.55 & 28.33 & 0.00 & 0.01 & 19.55 & 28.22 \\
\hline
EP & 28.40 & 27.04 & 4.29 & 0.49 & 24.11 & 26.55 \\
\hline
\section*{Acknowledgment}
This work has been partially supported by the Labex
-ACTION project (contract “ANR-11-LABX-01-01”). As a PhD student,
+ACTION project (contract ``ANR-11-LABX-01-01''). As a PhD student,
Mr. Ahmed Fanfakh, would like to thank the University of
Babylon (Iraq) for supporting his work.
