\usepackage{algpseudocode}
%\usepackage{amsthm}
\usepackage{graphicx}
-\usepackage[american]{babel}
% Extension pour les liens intra-documents (tagged PDF)
% et l'affichage correct des URL (commande \url{http://example.com})
%\usepackage{hyperref}
+\usepackage{multirow}
+
\usepackage{url}
\DeclareUrlCommand\email{\urlstyle{same}}
\todo[color=blue!10,#1]{\sffamily\textbf{LZK:} #2}\xspace}
\newcommand{\RCE}[2][inline]{%
\todo[color=yellow!10,#1]{\sffamily\textbf{RCE:} #2}\xspace}
+\newcommand{\DL}[2][inline]{%
+ \todo[color=pink!10,#1]{\sffamily\textbf{DL:} #2}\xspace}
\algnewcommand\algorithmicinput{\textbf{Input:}}
\algnewcommand\Input{\item[\algorithmicinput]}
-\begin{document} \RCE{Titre a confirmer.} \title{Comparative performance
-analysis of simulated grid-enabled numerical iterative algorithms}
+\begin{document}
+\title{Grid-enabled simulation of large-scale linear iterative solvers}
%\itshape{\journalnamelc}\footnotemark[2]}
-\author{ Charles Emile Ramamonjisoa and
- David Laiymani and
- Arnaud Giersch and
- Lilia Ziane Khodja and
- Raphaël Couturier
+\author{Charles Emile Ramamonjisoa\affil{1},
+ David Laiymani\affil{1},
+ Arnaud Giersch\affil{1},
+ Lilia Ziane Khodja\affil{2} and
+ Raphaël Couturier\affil{1}
}
\address{
- \centering
- Femto-ST Institute - DISC Department\\
- Université de Franche-Comté\\
- Belfort\\
- Email: \email{{raphael.couturier,arnaud.giersch,david.laiymani,charles.ramamonjisoa}@univ-fcomte.fr}
+ \affilnum{1}%
+ Femto-ST Institute, DISC Department,
+ University of Franche-Comté,
+ Belfort, France.
+ Email:~\email{{charles.ramamonjisoa,david.laiymani,arnaud.giersch,raphael.couturier}@univ-fcomte.fr}\break
+ \affilnum{2}
+ Department of Aerospace \& Mechanical Engineering,
+ Non Linear Computational Mechanics,
+ University of Liege, Liege, Belgium.
+ Email:~\email{l.zianekhodja@ulg.ac.be}
}
-%% Lilia Ziane Khodja: Department of Aerospace \& Mechanical Engineering\\ Non Linear Computational Mechanics\\ University of Liege\\ Liege, Belgium. Email: l.zianekhodja@ulg.ac.be
-
-\begin{abstract} The behavior of multi-core applications is always a challenge
-to predict, especially with a new architecture for which no experiment has been
-performed. With some applications, it is difficult, if not impossible, to build
-accurate performance models. That is why another solution is to use a simulation
-tool which allows us to change many parameters of the architecture (network
-bandwidth, latency, number of processors) and to simulate the execution of such
-applications. The main contribution of this paper is to show that the use of a
-simulation tool (here we have decided to use the SimGrid toolkit) can really
-help developpers to better tune their applications for a given multi-core
-architecture.
-
-In particular we focus our attention on two parallel iterative algorithms based
-on the Multisplitting algorithm and we compare them to the GMRES algorithm.
-These algorithms are used to solve linear systems. Two different variants of
-the Multisplitting are studied: one using synchronoous iterations and another
-one with asynchronous iterations. For each algorithm we have simulated
-different architecture parameters to evaluate their influence on the overall
-execution time. The obtain simulated results confirm the real results
-previously obtained on different real multi-core architectures and also confirm
-the efficiency of the asynchronous multisplitting algorithm compared to the
-synchronous GMRES method.
+\begin{abstract} %% The behavior of multi-core applications is always a challenge
+%% to predict, especially with a new architecture for which no experiment has been
+%% performed. With some applications, it is difficult, if not impossible, to build
+%% accurate performance models. That is why another solution is to use a simulation
+%% tool which allows us to change many parameters of the architecture (network
+%% bandwidth, latency, number of processors) and to simulate the execution of such
+%% applications. The main contribution of this paper is to show that the use of a
+%% simulation tool (here we have decided to use the SimGrid toolkit) can really
+%% help developers to better tune their applications for a given multi-core
+%% architecture.
+
+%% In this paper we focus our attention on the simulation of iterative algorithms to solve sparse linear systems on large clusters. We study the behavior of the widely used GMRES algorithm and two different variants of the Multisplitting algorithms: one using synchronous iterations and another one with asynchronous iterations.
+%% For each algorithm we have simulated
+%% different architecture parameters to evaluate their influence on the overall
+%% execution time.
+%% The simulations confirm the real results previously obtained on different real multi-core architectures and also confirm the efficiency of the asynchronous Multisplitting algorithm on distant clusters compared to the synchronous GMRES algorithm.
+
+The behavior of multi-core applications is always a challenge to predict, especially with a new architecture for which no experiment has been performed. With some applications, it is difficult, if not impossible, to build accurate performance models. That is why another solution is to use a simulation tool which allows us to change many parameters of the architecture (network bandwidth, latency, number of processors) and to simulate the execution of such applications.
+
+In this paper we focus on the simulation of iterative algorithms to solve sparse linear systems. We study the behavior of the GMRES algorithm and two different variants of the multisplitting algorithms: using synchronous or asynchronous iterations. For each algorithm we have simulated different architecture parameters to evaluate their influence on the overall execution time. The simulations confirm the real results previously obtained on different real multi-core architectures and also confirm the efficiency of the asynchronous multisplitting algorithm on distant clusters compared to the GMRES algorithm.
\end{abstract}
given application for a given architecture. In this way and in order to reduce
the access cost to these computing resources it seems very interesting to use a
simulation environment. The advantages are numerous: development life cycle,
-code debugging, ability to obtain results quickly~\ldots. In counterpart, the simulation results need to be consistent with the real ones.
+code debugging, ability to obtain results quickly\dots{} In counterpart, the simulation results need to be consistent with the real ones.
In this paper we focus on a class of highly efficient parallel algorithms called
\emph{iterative algorithms}. The parallel scheme of iterative methods is quite
from its neighbors. We say that the iteration computation follows a
\textit{synchronous} scheme. In the asynchronous scheme a task can compute a new
iteration without having to wait for the data dependencies coming from its
-neighbors. Both communication and computations are \textit{asynchronous}
+neighbors. Both communications and computations are \textit{asynchronous}
inducing that there is no more idle time, due to synchronizations, between two
iterations~\cite{bcvc06:ij}. This model presents some advantages and drawbacks
-that we detail in section~\ref{sec:asynchro} but even if the number of
+that we detail in Section~\ref{sec:asynchro} but even if the number of
iterations required to converge is generally greater than for the synchronous
case, it appears that the asynchronous iterative scheme can significantly
reduce overall execution times by suppressing idle times due to
allocations policies under varying CPU power, network speeds and loads is very
challenging and labor intensive~\cite{Calheiros:2011:CTM:1951445.1951450}. This
problematic is even more difficult for the asynchronous scheme where a small
-parameter variation of the execution platform can lead to very different numbers
-of iterations to reach the converge and so to very different execution times. In
-this challenging context we think that the use of a simulation tool can greatly
-leverage the possibility of testing various platform scenarios.
-
-The main contribution of this paper is to show that the use of a simulation tool
-(i.e. the SimGrid toolkit~\cite{SimGrid}) in the context of real parallel
-applications (i.e. large linear system solvers) can help developers to better
-tune their application for a given multi-core architecture. To show the validity
-of this approach we first compare the simulated execution of the multisplitting
-algorithm with the GMRES (Generalized Minimal Residual)
-solver~\cite{saad86} in synchronous mode. The obtained results on different
-simulated multi-core architectures confirm the real results previously obtained
-on non simulated architectures. We also confirm the efficiency of the
-asynchronous multisplitting algorithm compared to the synchronous GMRES. In
-this way and with a simple computing architecture (a laptop) SimGrid allows us
+parameter variation of the execution platform and of the application data can
+lead to very different numbers of iterations to reach the convergence and so to
+very different execution times. In this challenging context we think that the
+use of a simulation tool can greatly leverage the possibility of testing various
+platform scenarios.
+
+The {\bf main contribution of this paper} is to show that the use of a
+simulation tool (i.e. the SimGrid toolkit~\cite{SimGrid}) in the context of real
+parallel applications (i.e. large linear system solvers) can help developers to
+better tune their applications for a given multi-core architecture. To show the
+validity of this approach we first compare the simulated execution of the Krylov
+multisplitting algorithm with the GMRES (Generalized Minimal RESidual)
+solver~\cite{saad86} in synchronous mode. The simulation results allow us to
+determine which method to choose for a given multi-core architecture.
+Moreover the obtained results on different simulated multi-core architectures
+confirm the real results previously obtained on non simulated architectures.
+More precisely the simulated results are in accordance (i.e. with the same order
+of magnitude) with the works presented in~\cite{couturier15}, which show that
+the synchronous Krylov multisplitting method is more efficient than GMRES for large
+scale clusters. Simulated results also confirm the efficiency of the
+asynchronous multisplitting algorithm compared to the synchronous GMRES
+especially in case of geographically distant clusters.
+
+In this way and with a simple computing architecture (a laptop) SimGrid allows us
to run a test campaign of a real parallel iterative applications on
different simulated multi-core architectures. To our knowledge, there is no
related work on the large-scale multi-core simulation of a real synchronous and
This paper is organized as follows. Section~\ref{sec:asynchro} presents the
iteration model we use and more particularly the asynchronous scheme. In
-section~\ref{sec:simgrid} the SimGrid simulation toolkit is presented.
+Section~\ref{sec:simgrid} the SimGrid simulation toolkit is presented.
Section~\ref{sec:04} details the different solvers that we use. Finally our
-experimental results are presented in section~\ref{sec:expe} followed by some
+experimental results are presented in Section~\ref{sec:expe} followed by some
concluding remarks and perspectives.
-\section{The asynchronous iteration model}
+\section{The asynchronous iteration model and the motivations of our work}
\label{sec:asynchro}
-Asynchronous iterative methods have been studied for many years theoritecally and
+Asynchronous iterative methods have been studied for many years theoretically and
practically. Many methods have been considered and convergence results have been
proved. These methods can be used to solve, in parallel, fixed point problems
(i.e. problems for which the solution is $x^\star =f(x^\star)$. In practice,
-asynchronous iterations methods can be used to solve, for example, linear and
+asynchronous iteration methods can be used to solve, for example, linear and
non-linear systems of equations or optimization problems, interested readers are
invited to read~\cite{BT89,bahi07}.
requires very few modifications to be able to be executed in both variants. In
practice, only the communications and convergence detection are different. In
the synchronous mode, iterations are synchronized whereas in the asynchronous
-one, they are not. It should be noticed that non blocking communications can be
+one, they are not. It should be noticed that non-blocking communications can be
used in both modes. Concerning the convergence detection, synchronous variants
can use a global convergence procedure which acts as a global synchronization
point. In the asynchronous model, the convergence detection is more tricky as
it must not synchronize all the processors. Interested readers can
consult~\cite{myBCCV05c,bahi07,ccl09:ij}.
+The number of iterations required to reach the convergence is generally greater
+for the asynchronous scheme (this number depends on the delay of the
+messages). Note that, it is not the case in the synchronous mode where the
+number of iterations is the same than in the sequential mode. In this way, the
+set of the parameters of the platform (number of nodes, power of nodes,
+inter and intra clusters bandwidth and latency,~\ldots) and of the
+application can drastically change the number of iterations required to get the
+convergence. It follows that asynchronous iterative algorithms are difficult to
+optimize since the financial and deployment costs on large scale multi-core
+architectures are often very important. So, prior to deployment and tests it
+seems very promising to be able to simulate the behavior of asynchronous
+iterative algorithms. The problematic is then to show that the results produced
+by simulation are in accordance with reality i.e. of the same order of
+magnitude. To our knowledge, there is no study on this problematic.
+
\section{SimGrid}
- \label{sec:simgrid}
+\label{sec:simgrid}
+SimGrid~\cite{SimGrid,casanova+legrand+quinson.2008.simgrid,casanova+giersch+legrand+al.2014.versatile} is a discrete event simulation framework to study the behavior of large-scale distributed computing platforms as Grids, Peer-to-Peer systems, Clouds and High Performance Computation systems. It is widely used to simulate and evaluate heuristics, prototype applications or even assess legacy MPI applications. It is still actively developed by the scientific community and distributed as an open source software.
%%%%%%%%%%%%%%%%%%%%%%%%%
+% SimGrid~\cite{SimGrid,casanova+legrand+quinson.2008.simgrid,casanova+giersch+legrand+al.2014.versatile}
+% is a simulation framework to study the behavior of large-scale distributed
+% systems. As its name suggests, it emanates from the grid computing community,
+% but is nowadays used to study grids, clouds, HPC or peer-to-peer systems. The
+% early versions of SimGrid date back from 1999, but it is still actively
+% developed and distributed as an open source software. Today, it is one of the
+% major generic tools in the field of simulation for large-scale distributed
+% systems.
+
+SimGrid provides several programming interfaces: MSG to simulate Concurrent
+Sequential Processes, SimDAG to simulate DAGs of (parallel) tasks, and SMPI to
+run real applications written in MPI~\cite{MPI}. Apart from the native C
+interface, SimGrid provides bindings for the C++, Java, Lua and Ruby programming
+languages. SMPI is the interface that has been used for the work described in
+this paper. The SMPI interface implements about \np[\%]{80} of the MPI 2.0
+standard~\cite{bedaride+degomme+genaud+al.2013.toward}, and supports
+applications written in C or Fortran, with little or no modifications (cf Section IV - paragraph B).
+
+Within SimGrid, the execution of a distributed application is simulated by a
+single process. The application code is really executed, but some operations,
+like communications, are intercepted, and their running time is computed
+according to the characteristics of the simulated execution platform. The
+description of this target platform is given as an input for the execution, by
+means of an XML file. It describes the properties of the platform, such as
+the computing nodes with their computing power, the interconnection links with
+their bandwidth and latency, and the routing strategy. The scheduling of the
+simulated processes, as well as the simulated running time of the application
+are computed according to these properties.
+
+To compute the durations of the operations in the simulated world, and to take
+into account resource sharing (e.g. bandwidth sharing between competing
+communications), SimGrid uses a fluid model. This allows users to run relatively fast
+simulations, while still keeping accurate
+results~\cite{bedaride+degomme+genaud+al.2013.toward,
+ velho+schnorr+casanova+al.2013.validity}. Moreover, depending on the
+simulated application, SimGrid/SMPI allows to skip long lasting computations and
+to only take their duration into account. When the real computations cannot be
+skipped, but the results are unimportant for the simulation results, it is
+also possible to share dynamically allocated data structures between
+several simulated processes, and thus to reduce the whole memory consumption.
+These two techniques can help to run simulations on a very large scale.
+
+The validity of simulations with SimGrid has been asserted by several studies.
+See, for example, \cite{velho+schnorr+casanova+al.2013.validity} and articles
+referenced therein for the validity of the network models. Comparisons between
+real execution of MPI applications on the one hand, and their simulation with
+SMPI on the other hand, are presented in~\cite{guermouche+renard.2010.first,
+ clauss+stillwell+genaud+al.2011.single,
+ bedaride+degomme+genaud+al.2013.toward}. All these works conclude that
+SimGrid is able to simulate pretty accurately the real behavior of the
+applications.
%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Two-stage multisplitting methods}
A_{\ell\ell} x_\ell = c_\ell,\mbox{~for~}\ell=1,\ldots,L,
\label{eq:03}
\end{equation}
-where right-hand sides $c_\ell=b_\ell-\sum_{m\neq\ell}A_{\ell m}x_m$ are computed using the shared vectors $x_m$. In this paper, we use the well-known iterative method GMRES ({\it Generalized Minimal RESidual})~\cite{saad86} as an inner iteration to approximate the solutions of the different splittings arising from the block Jacobi multisplitting of matrix $A$. The algorithm in Figure~\ref{alg:01} shows the main key points of our block Jacobi two-stage method executed by a cluster of processors. In line~\ref{solve}, the linear sub-system~(\ref{eq:03}) is solved in parallel using GMRES method where $\MIG$ and $\TOLG$ are the maximum number of inner iterations and the tolerance threshold for GMRES respectively. The convergence of the two-stage multisplitting methods, based on synchronous or asynchronous iterations, has been studied by many authors for example~\cite{Bru95,bahi07}.
+where right-hand sides $c_\ell=b_\ell-\sum_{m\neq\ell}A_{\ell m}x_m$ are computed using the shared vectors $x_m$. In this paper, we use the well-known iterative method GMRES~\cite{saad86} as an inner iteration to approximate the solutions of the different splittings arising from the block Jacobi multisplitting of matrix $A$. The algorithm in Figure~\ref{alg:01} shows the main key points of our block Jacobi two-stage method executed by a cluster of processors. In line~\ref{solve}, the linear sub-system~(\ref{eq:03}) is solved in parallel using GMRES method where $\MIG$ and $\TOLG$ are the maximum number of inner iterations and the tolerance threshold for GMRES respectively. The convergence of the two-stage multisplitting methods, based on synchronous or asynchronous iterations, has been studied by many authors for example~\cite{Bru95,bahi07}.
-\begin{figure}[t]
+\begin{figure}[htpb]
%\begin{algorithm}[t]
%\caption{Block Jacobi two-stage multisplitting method}
\begin{algorithmic}[1]
\end{equation}
The algorithm in Figure~\ref{alg:02} includes the procedure of the residual minimization and the outer iteration is restarted with a new approximation $\tilde{x}$ at every $s$ iterations. The least-squares problem~(\ref{eq:06}) is solved in parallel by all clusters using CGLS method~\cite{Hestenes52} such that $\MIC$ is the maximum number of iterations and $\TOLC$ is the tolerance threshold for this method (line~\ref{cgls} in Figure~\ref{alg:02}).
-\begin{figure}[t]
+\begin{figure}[htbp]
%\begin{algorithm}[t]
%\caption{Krylov two-stage method using block Jacobi multisplitting}
\begin{algorithmic}[1]
\subsection{Simulation of the two-stage methods using SimGrid toolkit}
\label{sec:04.02}
-One of our objectives when simulating the application in Simgrid is, as in real
+One of our objectives when simulating the application in SimGrid is, as in real
life, to get accurate results (solutions of the problem) but also to ensure the
test reproducibility under the same conditions. According to our experience,
-very few modifications are required to adapt a MPI program for the Simgrid
+very few modifications are required to adapt a MPI program for the SimGrid
simulator using SMPI (Simulator MPI). The first modification is to include SMPI
-libraries and related header files (smpi.h). The second modification is to
+libraries and related header files (\verb+smpi.h+). The second modification is to
suppress all global variables by replacing them with local variables or using a
-Simgrid selector called "runtime automatic switching"
+SimGrid selector called "runtime automatic switching"
(smpi/privatize\_global\_variables). Indeed, global variables can generate side
effects on runtime between the threads running in the same process and generated by
-Simgrid to simulate the grid environment.
-
-%\RC{On vire cette phrase ?} \RCE {Si c'est la phrase d'avant sur les threads, je pense qu'on peut la retenir car c'est l'explication du pourquoi Simgrid n'aime pas les variables globales. Si c'est pas bien dit, on peut la reformuler. Si c'est la phrase ci-apres, effectivement, on peut la virer si elle preterais a discussion}The
-%last modification on the MPI program pointed out for some cases, the review of
-%the sequence of the MPI\_Isend, MPI\_Irecv and MPI\_Waitall instructions which
-%might cause an infinite loop.
+SimGrid to simulate the grid environment.
-
-\paragraph{Simgrid Simulator parameters}
-\ \\ \noindent Before running a Simgrid benchmark, many parameters for the
+\paragraph{Parameters of the simulation in SimGrid}
+\ \\ \noindent Before running a SimGrid benchmark, many parameters for the
computation platform must be defined. For our experiments, we consider platforms
in which several clusters are geographically distant, so there are intra and
inter-cluster communications. In the following, these parameters are described:
\begin{itemize}
- \item hostfile: hosts description file.
+ \item hostfile: hosts description file,
\item platform: file describing the platform architecture: clusters (CPU power,
-\dots{}), intra cluster network description, inter cluster network (bandwidth bw,
-latency lat, \dots{}).
+\dots{}), intra cluster network description, inter cluster network (bandwidth $bw$,
+latency $lat$, \dots{}),
\item archi : grid computational description (number of clusters, number of
-nodes/processors for each cluster).
+nodes/processors in each cluster).
\end{itemize}
\noindent
In addition, the following arguments are given to the programs at runtime:
\begin{itemize}
- \item maximum number of inner and outer iterations;
- \item inner and outer precisions;
- \item maximum number of the GMRES restarts in the Arnorldi process;
- \item maximum number of iterations and the tolerance threshold in classical GMRES;
- \item tolerance threshold for outer and inner-iterations;
- \item matrix size (N$_{x}$, N$_{y}$ and N$_{z}$) respectively on $x, y, z$ axis;
- \item matrix diagonal value is fixed to $6.0$ for synchronous Krylov multisplitting experiments and $6.2$ for asynchronous block Jacobi experiments; \RC{CE tu vérifies, je dis ca de tête}
- \item matrix off-diagonal value;
- \item execution mode: synchronous or asynchronous;
- \RCE {C'est ok la liste des arguments du programme mais si Lilia ou toi pouvez preciser pour les arguments pour CGLS ci dessous} \RC{Vu que tu n'as pas fait varier ce paramètre, on peut ne pas en parler}
- \item Size of matrix S;
- \item Maximum number of iterations and tolerance threshold for CGLS.
+ \item maximum number of inner iterations $\MIG$ and outer iterations $\MIM$,
+ \item inner precision $\TOLG$ and outer precision $\TOLM$,
+ \item matrix sizes of the problem: N$_{x}$, N$_{y}$ and N$_{z}$ on axis $x$, $y$ and $z$ respectively (in our experiments, we solve 3D problem, see Section~\ref{3dpoisson}),
+ \item matrix diagonal value is fixed to $6.0$ for synchronous experiments and $6.2$ for asynchronous ones,
+ \item matrix off-diagonal value is fixed to $-1.0$,
+ \item number of vectors in matrix $S$ (i.e. value of $s$),
+ \item maximum number of iterations $\MIC$ and precision $\TOLC$ for CGLS method,
+ \item maximum number of iterations and precision for the classical GMRES method,
+ \item maximum number of restarts for the Arnorldi process in GMRES method,
+ \item execution mode: synchronous or asynchronous.
\end{itemize}
-It should also be noticed that both solvers have been executed with the Simgrid selector \texttt{-cfg=smpi/running\_power} which determines the computational power (here 19GFlops) of the simulator host machine.
+It should also be noticed that both solvers have been executed with the SimGrid selector \texttt{-cfg=smpi/running\_power} which determines the computational power (here 19GFlops) of the simulator host machine.
%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%
-\section{Experimental Results}
+\section{Experimental results}
\label{sec:expe}
-In this section, experiments for both Multisplitting algorithms are reported. First the 3D Poisson problem used in our experiments is described.
+In this section, experiments for both multisplitting algorithms are reported. First the 3D Poisson problem used in our experiments is described.
\subsection{The 3D Poisson problem}
+\label{3dpoisson}
We use our two-stage algorithms to solve the well-known Poisson problem $\nabla^2\phi=f$~\cite{Polyanin01}. In three-dimensional Cartesian coordinates in $\mathbb{R}^3$, the problem takes the following form:
\textbf{Step 2}: Collect the software materials needed for the experimentation.
In our case, we have two variants algorithms for the resolution of the
-3D-Poisson problem: (1) using the classical GMRES; (2) and the Multisplitting
-method. In addition, the Simgrid simulator has been chosen to simulate the
-behaviors of the distributed applications. Simgrid is running in a virtual
+3D-Poisson problem: (1) using the classical GMRES; (2) and the multisplitting
+method. In addition, the SimGrid simulator has been chosen to simulate the
+behaviors of the distributed applications. SimGrid is running in a virtual
machine on a simple laptop. \\
\textbf{Step 3}: Fix the criteria which will be used for the future
on the one hand the algorithm execution mode (synchronous and asynchronous)
and on the other hand the execution time and the number of iterations to reach the convergence. \\
-\textbf{Step 4 }: Set up the different grid testbed environments that will be
-simulated in the simulator tool to run the program. The following architecture
-has been configured in Simgrid : 2x16, 4x8, 4x16, 8x8 and 2x50. The first number
+\textbf{Step 4}: Set up the different grid testbed environments that will be
+simulated in the simulator tool to run the program. The following architectures
+have been configured in SimGrid : 2$\times$16, 4$\times$8, 4$\times$16, 8$\times$8 and 2$\times$50. The first number
represents the number of clusters in the grid and the second number represents
-the number of hosts (processors/cores) in each cluster. The network has been
+the number of hosts (processors/cores) in each cluster. The network has been
designed to operate with a bandwidth equals to 10Gbits (resp. 1Gbits/s) and a
latency of 8.10$^{-6}$ seconds (resp. 5.10$^{-5}$) for the intra-clusters links
-(resp. inter-clusters backbone links). \\
+(resp. inter-clusters backbone links). \\
+
+\LZK{Il me semble que le bw et lat des deux réseaux varient dans les expés d'une simu à l'autre. On vire la dernière phrase?}
+\RC{il me semble qu'on peut laisser ca}
\textbf{Step 5}: Conduct an extensive and comprehensive testings
within these configurations by varying the key parameters, especially
\textbf{Step 6} : Collect and analyze the output results.
-\subsection{Factors impacting distributed applications performance in
-a grid environment}
+\subsection{Factors impacting distributed applications performance in a grid environment}
When running a distributed application in a computational grid, many factors may
-have a strong impact on the performances. First of all, the architecture of the
+have a strong impact on the performance. First of all, the architecture of the
grid itself can obviously influence the performance results of the program. The
performance gain might be important theoretically when the number of clusters
and/or the number of nodes (processors/cores) in each individual cluster
increase.
-Another important factor impacting the overall performances of the application
+Another important factor impacting the overall performance of the application
is the network configuration. Two main network parameters can modify drastically
the program output results:
\begin{enumerate}
-\item the network bandwidth (bw=bits/s) also known as "the data-carrying
+\item the network bandwidth ($bw$ in bits/s) also known as "the data-carrying
capacity" of the network is defined as the maximum of data that can transit
from one point to another in a unit of time.
-\item the network latency (lat : microsecond) defined as the delay from the
+\item the network latency ($lat$ in microseconds) defined as the delay from the
start time to send a simple data from a source to a destination.
\end{enumerate}
Upon the network characteristics, another impacting factor is the volume of data exchanged between the nodes in the cluster
on the other hand, the "inter-network" which is the backbone link between
clusters. In practice, these two networks have different speeds.
The intra-network generally works like a high speed local network with a
- high bandwith and very low latency. In opposite, the inter-network connects
- clusters sometime via heterogeneous networks components throuth internet with
+ high bandwidth and very low latency. In opposite, the inter-network connects
+ clusters sometime via heterogeneous networks components through internet with
a lower speed. The network between distant clusters might be a bottleneck
for the global performance of the application.
-\subsection{Comparison of GMRES and Krylov Multisplitting algorithms in synchronous mode}
+\subsection{Comparison of GMRES and Krylov two-stage algorithms in synchronous mode}
In the scope of this paper, our first objective is to analyze when the Krylov
-Multisplitting method has better performances than the classical GMRES
-method. With an iterative method, better performances mean a smaller number of
-iterations and execution time before reaching the convergence. For a systematic
-study, the experiments should figure out that, for various grid parameters
-values, the simulator will confirm the targeted outcomes, particularly for poor
-and slow networks, focusing on the impact on the communication performance on
-the chosen class of algorithm.
+two-stage method has better performance than the classical GMRES method. With a synchronous iterative method, better performance means a
+smaller number of iterations and execution time before reaching the convergence.
+In what follows, we will present the test conditions, the output results and our comments.
-The following paragraphs present the test conditions, the output results
-and our comments.\\
+%%RAPH : on vire ca, c'est pas clair et pas important
+%For a systematic study, the experiments should figure out that, for various
+%grid parameters values, the simulator will confirm Multisplitting method better performance compared to classical GMRES, particularly on poor and slow networks.
+%\LZK{Pas du tout claire la dernière phrase (For a systematic...)!!}
+%\RCE { Reformule autrement}
-\subsubsection{Execution of the the algorithms on various computational grid
-architecture and scaling up the input matrix size}
+
+%\subsubsection{Execution of the algorithms on various computational grid architectures and scaling up the input matrix size}
+\subsubsection{Simulations for various grid architectures and scaling-up matrix sizes}
\ \\
% environment
-\begin{figure} [ht!]
+\RC{Je ne comprends plus rien CE : pourquoi dans 5.4.1 il y a 2 network et aussi dans 5.4.2. Quelle est la différence? Dans la figure 3 de la section 5.4.1 pourquoi il n'y a pas N1 et N2?}
+
+\begin{table} [ht!]
\begin{center}
-\begin{tabular}{r c }
+\begin{tabular}{ll }
\hline
- Grid & 2x16, 4x8, 4x16 and 8x8\\ %\hline
- Network & N2 : bw=1Gbits/s - lat=5.10$^{-5}$ \\ %\hline
- Input matrix size & N$_{x}$ x N$_{y}$ x N$_{z}$ =150 x 150 x 150\\ %\hline
- - & N$_{x}$ x N$_{y}$ x N$_{z}$ =170 x 170 x 170 \\ \hline
+ Grid architecture & 2$\times$16, 4$\times$8, 4$\times$16 and 8$\times$8\\ %\hline
+ \multirow{2}{*}{Network} & Inter (N2): $bw$=1Gbs, $lat$=5$\times$10$^{-5}$ \\ %\hline
+ & Intra (N1): $bw$=10Gbs, $lat$=8$\times$10$^{-6}$ \\
+ \multirow{2}{*}{Matrix size} & N$_{x}$ $\times$ N$_{y}$ $\times$ N$_{z}$ =150 $\times$ 150 $\times$ 150\\ %\hline
+ & N$_{x}$ $\times$ N$_{y}$ $\times$ N$_{z}$ =170 $\times$ 170 $\times$ 170 \\ \hline
\end{tabular}
-\caption{Clusters x Nodes with N$_{x}$=150 or N$_{x}$=170 \RC{je ne comprends pas la légende... Ca ne serait pas plutot Characteristics of cluster (mais il faudrait lui donner un nom)}}
+\caption{Test conditions: various grid configurations with the matrix sizes 150$^3$ or 170$^3$}
+%\LZK{Ce sont les caractéristiques du réseau intra ou inter clusters? Ce n'est pas précisé...}
+%\RCE{oui c est precise}
+\label{tab:01}
\end{center}
-\end{figure}
-
-
-
-
-%\RCE{J'ai voulu mettre les tableaux des données mais je pense que c'est inutile et ça va surcharger}
-
-
-In this section, we analyze the performences of algorithms running on various
-grid configuration (2x16, 4x8, 4x16 and 8x8). First, the results in Figure~\ref{fig:01}
-show for all grid configuration the non-variation of the number of iterations of
-classical GMRES for a given input matrix size; it is not the case for the
-multisplitting method.
-
-\RC{CE attention tu n'as pas mis de label dans tes figures, donc c'est le bordel, j'en mets mais vérifie...}
-\RC{Les légendes ne sont pas explicites...}
-
-
-\begin{figure} [ht!]
+\end{table}
+
+
+In this section, we analyze the simulations conducted on various grid
+configurations presented in Table~\ref{tab:01}. It should be noticed that two
+networks are considered: N1 is the network between clusters (inter-cluster) and
+N2 is the network inside a cluster (intra-cluster). Figure~\ref{fig:01} shows,
+for all grid configurations and a given matrix size, a non-variation in the
+number of iterations for the classical GMRES algorithm, which is not the case of
+the Krylov two-stage algorithm.
+%% First, the results in Figure~\ref{fig:01}
+%% show for all grid configurations the non-variation of the number of iterations of
+%% classical GMRES for a given input matrix size; it is not the case for the
+%% multisplitting method.
+%\RC{CE attention tu n'as pas mis de label dans tes figures, donc c'est le bordel, j'en mets mais vérifie...}
+%\RC{Les légendes ne sont pas explicites...}
+%\RCE{Corrige}
+
+\begin{figure} [htbp]
\begin{center}
\includegraphics[width=100mm]{cluster_x_nodes_nx_150_and_nx_170.pdf}
\end{center}
- \caption{Cluster x Nodes N$_{x}$=150 and N$_{x}$=170}
+ \caption{Various grid configurations with the matrix sizes 150$^3$ and 170$^3$}
+%\AG{Utiliser le point comme séparateur décimal et non la virgule. Idem dans les autres figures.}
+%\LZK{Pour quelle taille du problème sont calculés les nombres d'itérations? Que représente le 2 Clusters x 16 Nodes with Nx=150 and Nx=170 en haut de la figure?}
+ %\RCE {Corrige}
+ \RC{Idéalement dans la légende il faudrait insiquer Pb size=$150^3$ ou $170^3$ car pour l'instant Nx=150 ca n'indique rien concernant Ny et Nz}
\label{fig:01}
\end{figure}
+
The execution times between the two algorithms is significant with different
-grid architectures, even with the same number of processors (for example, 2x16
-and 4x8). We can observ the low sensitivity of the Krylov multisplitting method
+grid architectures, even with the same number of processors (for example, 2 $\times$ 16
+and 4 $\times 8$). We can observe a better sensitivity of the Krylov multisplitting method
(compared with the classical GMRES) when scaling up the number of the processors
in the grid: in average, the GMRES (resp. Multisplitting) algorithm performs
-40\% better (resp. 48\%) less when running from 2x16=32 to 8x8=64 processors.
+$40\%$ better (resp. $48\%$) when running from 32 (grid 2 $\times$ 16) to 64 processors/cores (grid 8 $\times$ 8). Note that even with a grid 8 $\times$ 8 having the maximum number of clusters, the execution time of the multisplitting method is in average 32\% less compared to GMRES.
+\RC{pas très clair, c'est pas précis de dire qu'un algo perform mieux qu'un autre, selon quel critère?}
+\LZK{A revoir toute cette analyse... Le multi est plus performant que GMRES. Les temps d'exécution de multi sont sensibles au nombre de CLUSTERS. Il est moins performant pour un nombre grand de cluster. Avez vous d'autres remarques?}
+\RCE{Remarquez que meme avec une grille 8x8, le multi est toujours plus performant}
-\subsubsection{Running on two different speed cluster inter-networks}
-\ \\
+\subsubsection{Simulations for two different inter-clusters network speeds \\}
-\begin{figure} [ht!]
+\begin{table} [ht!]
\begin{center}
-\begin{tabular}{r c }
+\begin{tabular}{ll}
\hline
- Grid & 2x16, 4x8\\ %\hline
- Network & N1 : bw=10Gbs-lat=8.10$^{-6}$ \\ %\hline
- - & N2 : bw=1Gbs-lat=5.10$^{-5}$ \\
- Input matrix size & N$_{x}$ x N$_{y}$ x N$_{z}$ =150 x 150 x 150\\ \hline
+ Grid architecture & 2$\times$16, 4$\times$8\\ %\hline
+ \multirow{2}{*}{Inter Network} & N1: $bw$=1Gbs, $lat$=5$\times$10$^{-5}$ \\ %\hline
+ & N2: $bw$=10Gbs, $lat$=8$\times$10$^{-6}$ \\
+ Matrix size & $N_{x} \times N_{y} \times N_{z} =150 \times 150 \times 150$\\ \hline
\end{tabular}
-\caption{Clusters x Nodes - Networks N1 x N2}
+\caption{Test conditions: grid configurations 2$\times$16 and 4$\times$8 with networks N1 vs. N2}
+\label{tab:02}
\end{center}
-\end{figure}
+\end{table}
+
+In this section, the experiments compare the behavior of the algorithms running on a
+speeder inter-cluster network (N2) and also on a less performant network (N1) respectively defined in the test conditions Table~\ref{tab:02}.
+%\RC{Il faut définir cela avant...}
+Figure~\ref{fig:02} shows that end users will reduce the execution time
+for both algorithms when using a grid architecture like 4 $\times$ 16 or 8 $\times$ 8: the reduction factor is around $2$. The results depict also that when
+the network speed drops down (variation of 12.5\%), the difference between the two Multisplitting algorithms execution times can reach more than 25\%.
%\begin{wrapfigure}{l}{100mm}
-\begin{figure} [ht!]
+\begin{figure} [htbp]
\centering
\includegraphics[width=100mm]{cluster_x_nodes_n1_x_n2.pdf}
-\caption{Cluster x Nodes N1 x N2}
+\caption{Various grid configurations with networks N1 vs N2
+\AG{\np{8E-6}, \np{5E-6} au lieu de 8E-6, 5E-6}}
+\RCE{Corrige}
\label{fig:02}
\end{figure}
%\end{wrapfigure}
-These experiments compare the behavior of the algorithms running first on a
-speed inter-cluster network (N1) and also on a less performant network (N2).
-Figure~\ref{fig:02} shows that end users will gain to reduce the execution time
-for both algorithms in using a grid architecture like 4x16 or 8x8: the
-performance was increased in a factor of 2. The results depict also that when
-the network speed drops down (12.5\%), the difference between the execution
-times can reach more than 25\%. \RC{c'est pas clair : la différence entre quoi et quoi?}
\subsubsection{Network latency impacts on performance}
\ \\
-\begin{figure} [ht!]
+\begin{table} [ht!]
\centering
\begin{tabular}{r c }
\hline
- Grid & 2x16\\ %\hline
- Network & N1 : bw=1Gbs \\ %\hline
- Input matrix size & N$_{x}$ x N$_{y}$ x N$_{z}$ =150 x 150 x 150\\ \hline
+ Grid Architecture & 2 $\times$ 16\\ %\hline
+ \multirow{2}{*}{Inter Network N1} & $bw$=1Gbs, \\ %\hline
+ & $lat$= From 8$\times$10$^{-6}$ to $6.10^{-5}$ second \\
+ Input matrix size & $N_{x} \times N_{y} \times N_{z} = 150 \times 150 \times 150$\\ \hline
\end{tabular}
-\caption{Network latency impact}
-\end{figure}
-
+\caption{Test conditions: network latency impacts}
+\label{tab:03}
+\end{table}
-
-\begin{figure} [ht!]
+\begin{figure} [htbp]
\centering
\includegraphics[width=100mm]{network_latency_impact_on_execution_time.pdf}
-\caption{Network latency impact on execution time}
+\caption{Network latency impacts on execution time
+\AG{\np{E-6}}}
\label{fig:03}
\end{figure}
+According to the results of Figure~\ref{fig:03}, a degradation of the network
+latency from $8.10^{-6}$ to $6.10^{-5}$ implies an absolute time increase of
+more than $75\%$ (resp. $82\%$) of the execution for the classical GMRES
+(resp. Krylov multisplitting) algorithm which means that the GMRES seems tolerate more the network latency variation with a less rate increase of the execution time. However, the execution time factor between the two algorithms varies from 2.2 to 1.5 times with a network latency decreasing from $8.10^{-6}$ to $6.10^{-5}$.
-According the results in Figure~\ref{fig:03}, a degradation of the network
-latency from 8.10$^{-6}$ to 6.10$^{-5}$ implies an absolute time increase more
-than 75\% (resp. 82\%) of the execution for the classical GMRES (resp. Krylov
-multisplitting) algorithm. In addition, it appears that the Krylov
-multisplitting method tolerates more the network latency variation with a less
-rate increase of the execution time. Consequently, in the worst case
-(lat=6.10$^{-5 }$), the execution time for GMRES is almost the double than the
-time of the Krylov multisplitting, even though, the performance was on the same
-order of magnitude with a latency of 8.10$^{-6}$.
+\RC{Les 2 précédentes phrases me semblent en contradiction....}
+\RCE{Reformule}
\subsubsection{Network bandwidth impacts on performance}
\ \\
-\begin{figure} [ht!]
+\begin{table} [ht!]
\centering
\begin{tabular}{r c }
\hline
- Grid & 2x16\\ %\hline
- Network & N1 : bw=1Gbs - lat=5.10$^{-5}$ \\ %\hline
- Input matrix size & N$_{x}$ x N$_{y}$ x N$_{z}$ =150 x 150 x 150\\ \hline \\
+ Grid Architecture & 2 $\times$ 16\\ %\hline
+\multirow{2}{*}{Inter Network N1} & $bw$=From 1Gbs to 10 Gbs \\ %\hline
+ & $lat$= 5.10$^{-5}$ second \\
+ Input matrix size & $N_{x} \times N_{y} \times N_{z} =150 \times 150 \times 150$\\ \hline \\
\end{tabular}
-\caption{Network bandwidth impact}
-\end{figure}
+\caption{Test conditions: Network bandwidth impacts\RC{Qu'est ce qui varie ici? Il n'y a pas de variation dans le tableau}}
+\RCE{C est le bw}
+\label{tab:04}
+\end{table}
-\begin{figure} [ht!]
+\begin{figure} [htbp]
\centering
\includegraphics[width=100mm]{network_bandwith_impact_on_execution_time.pdf}
-\caption{Network bandwith impact on execution time}
+\caption{Network bandwith impacts on execution time}
+%\AG{``Execution time'' avec un 't' minuscule}. Idem autres figures.}
+%\RCE{Corrige}
\label{fig:04}
\end{figure}
-
-
The results of increasing the network bandwidth show the improvement of the
performance for both algorithms by reducing the execution time (see
Figure~\ref{fig:04}). However, in this case, the Krylov multisplitting method
presents a better performance in the considered bandwidth interval with a gain
-of 40\% which is only around 24\% for classical GMRES.
+of $40\%$ which is only around $24\%$ for the classical GMRES.
\subsubsection{Input matrix size impacts on performance}
\ \\
-\begin{figure} [ht!]
+\begin{table} [ht!]
\centering
\begin{tabular}{r c }
\hline
- Grid & 4x8\\ %\hline
- Network & N2 : bw=1Gbs - lat=5.10$^{-5}$ \\
- Input matrix size & N$_{x}$ = From 40 to 200\\ \hline
+ Grid Architecture & 4 $\times$ 8\\ %\hline
+ Inter Network & $bw$=1Gbs - $lat$=5.10$^{-5}$ \\
+ Input matrix size & $N_{x} \times N_{y} \times N_{z}$ = From 40$^{3}$ to 200$^{3}$\\ \hline
\end{tabular}
-\caption{Input matrix size impact}
-\end{figure}
+\caption{Test conditions: Input matrix size impacts}
+\label{tab:05}
+\end{table}
-\begin{figure} [ht!]
+\begin{figure} [htbp]
\centering
\includegraphics[width=100mm]{pb_size_impact_on_execution_time.pdf}
-\caption{Problem size impact on execution time}
+\caption{Problem size impacts on execution time}
\label{fig:05}
\end{figure}
-In these experiments, the input matrix size has been set from N$_{x}$ = N$_{y}$
-= N$_{z}$ = 40 to 200 side elements that is from 40$^{3}$ = 64.000 to 200$^{3}$
-= 8,000,000 points. Obviously, as shown in Figure~\ref{fig:05}, the execution
+In these experiments, the input matrix size has been set from $N_{x} = N_{y}
+= N_{z} = 40$ to $200$ side elements that is from $40^{3} = 64.000$ to $200^{3}
+= 8,000,000$ points. Obviously, as shown in Figure~\ref{fig:05}, the execution
time for both algorithms increases when the input matrix size also increases.
But the interesting results are:
\begin{enumerate}
- \item the drastic increase (300 times) \RC{Je ne vois pas cela sur la figure}
-of the number of iterations needed to reach the convergence for the classical
-GMRES algorithm when the matrix size go beyond N$_{x}$=150;
-\item the classical GMRES execution time is almost the double for N$_{x}$=140
+ \item the important increase ($10$ times) of the number of iterations needed to
+ reach the convergence for the classical GMRES algorithm particularly, when the matrix size
+ go beyond $N_{x}=150$; \RC{C'est toujours pas clair... ok le nommbre d'itérations est 10 fois plus long mais la suite de la phrase ne veut rien dire}
+ \RCE{Le nombre d'iterations augmente de 10 fois, cela surtout a partir de N=150}
+
+\item the classical GMRES execution time is almost the double for $N_{x}=140$
compared with the Krylov multisplitting method.
\end{enumerate}
These findings may help a lot end users to setup the best and the optimal
targeted environment for the application deployment when focusing on the problem
size scale up. It should be noticed that the same test has been done with the
-grid 2x16 leading to the same conclusion.
+grid 2 $\times$ 16 leading to the same conclusion.
-\subsubsection{CPU Power impact on performance}
+\subsubsection{CPU Power impacts on performance}
-\begin{figure} [ht!]
+\begin{table} [htbp]
\centering
\begin{tabular}{r c }
\hline
- Grid & 2x16\\ %\hline
- Network & N2 : bw=1Gbs - lat=5.10$^{-5}$ \\ %\hline
- Input matrix size & N$_{x}$ = 150 x 150 x 150\\ \hline
+ Grid architecture & 2 $\times$ 16\\ %\hline
+ Inter Network & N2 : $bw$=1Gbs - $lat$=5.10$^{-5}$ \\ %\hline
+ Input matrix size & $N_{x} = 150 \times 150 \times 150$\\
+ CPU Power & From 3 to 19 GFlops \\ \hline
\end{tabular}
-\caption{CPU Power impact}
-\end{figure}
+\caption{Test conditions: CPU Power impacts}
+\label{tab:06}
+\end{table}
\begin{figure} [ht!]
\centering
\includegraphics[width=100mm]{cpu_power_impact_on_execution_time.pdf}
-\caption{CPU Power impact on execution time}
+\caption{CPU Power impacts on execution time}
\label{fig:06}
\end{figure}
Using the Simgrid simulator flexibility, we have tried to determine the impact
on the algorithms performance in varying the CPU power of the clusters nodes
-from 1 to 19 GFlops. The outputs depicted in Figure~\ref{fig:06} confirm the
-performance gain, around 95\% for both of the two methods, after adding more
+from $1$ to $19$ GFlops. The outputs depicted in Figure~\ref{fig:06} confirm the
+performance gain, around $95\%$ for both of the two methods, after adding more
powerful CPU.
+\ \\
+%\DL{il faut une conclusion sur ces tests : ils confirment les résultats déjà
+%obtenus en grandeur réelle. Donc c'est une aide précieuse pour les dev. Pas
+%besoin de déployer sur une archi réelle}
+
+To conclude these series of experiments, with SimGrid we have been able to make
+many simulations with many parameters variations. Doing all these experiments
+with a real platform is most of the time not possible. Moreover the behavior of
+both GMRES and Krylov multisplitting methods is in accordance with larger real
+executions on large scale supercomputer~\cite{couturier15}.
+
\subsection{Comparing GMRES in native synchronous mode and the multisplitting algorithm in asynchronous mode}
The previous paragraphs put in evidence the interests to simulate the behavior
of the application before any deployment in a real environment. In this
section, following the same previous methodology, our goal is to compare the
-efficiency of the multisplitting method in \textit{ asynchronous mode} with the
+efficiency of the multisplitting method in \textit{ asynchronous mode} compared with the
classical GMRES in \textit{synchronous mode}.
The interest of using an asynchronous algorithm is that there is no more
theoretically reduce the overall execution time and can improve the algorithm
performance.
-\RC{la phrase suivante est bizarre, je ne comprends pas pourquoi elle vient ici}
-As stated before, the Simgrid simulator tool has been successfully used to show
-the efficiency of the multisplitting in asynchronous mode and to find the best
-combination of the grid resources (CPU, Network, input matrix size, \ldots ) to
-get the highest \textit{"relative gain"} (exec\_time$_{GMRES}$ /
-exec\_time$_{multisplitting}$) in comparison with the classical GMRES time.
+In this section, the Simgrid simulator is used to compare the behavior of the
+multisplitting in asynchronous mode with GMRES in synchronous mode. Several
+benchmarks have been performed with various combination of the grid resources
+(CPU, Network, input matrix size, \ldots ). The test conditions are summarized
+in Table~\ref{tab:07}. In order to compare the execution times, this table
+reports the relative gain between both algorithms. It is defined by the ratio
+between the execution time of GMRES and the execution time of the
+multisplitting. The ration is greater than one because the asynchronous
+multisplitting version is faster than GMRES.
-The test conditions are summarized in the table below : \\
-\begin{figure} [ht!]
+\begin{table} [htbp]
\centering
\begin{tabular}{r c }
\hline
- Grid & 2x50 totaling 100 processors\\ %\hline
+ Grid Architecture & 2 $\times$ 50 totaling 100 processors\\ %\hline
Processors Power & 1 GFlops to 1.5 GFlops\\
Intra-Network & bw=1.25 Gbits - lat=5.10$^{-5}$ \\ %\hline
Inter-Network & bw=5 Mbits - lat=2.10$^{-2}$\\
- Input matrix size & N$_{x}$ = From 62 to 150\\ %\hline
+ Input matrix size & $N_{x}$ = From 62 to 150\\ %\hline
Residual error precision & 10$^{-5}$ to 10$^{-9}$\\ \hline \\
\end{tabular}
-\end{figure}
+\caption{Test conditions: GMRES in synchronous mode vs Krylov Multisplitting in asynchronous mode}
+\label{tab:07}
+\end{table}
Again, comprehensive and extensive tests have been conducted with different
-parametes as the CPU power, the network parameters (bandwidth and latency) in
-the simulator tool and with different problem size. The relative gains greater
-than 1 between the two algorithms have been captured after each step of the
-test. In Figure~\ref{table:01} are reported the best grid configurations
-allowing the multisplitting method to be more than 2.5 times faster than the
+parameters as the CPU power, the network parameters (bandwidth and latency)
+and with different problem size. The relative gains greater than $1$ between the
+two algorithms have been captured after each step of the test. In
+Table~\ref{tab:08} are reported the best grid configurations allowing
+the multisplitting method to be more than $2.5$ times faster than the
classical GMRES. These experiments also show the relative tolerance of the
multisplitting algorithm when using a low speed network as usually observed with
-geographically distant clusters throuth the internet.
+geographically distant clusters through the internet.
% use the same column width for the following three tables
\newlength{\mytablew}\settowidth{\mytablew}{\footnotesize\np{E-11}}
\end{tabular}}
-\begin{figure}[!t]
+\begin{table}[!t]
\centering
%\begin{table}
% \caption{Relative gain of the multisplitting algorithm compared with the classical GMRES}
power (GFlops)
& 1 & 1 & 1 & 1.5 & 1.5 & 1.5 & 1.5 & 1 & 1.5 & 1.5 \\
\hline
- size (N)
+ size ($N^3$)
& 62 & 62 & 62 & 100 & 100 & 110 & 120 & 130 & 140 & 150 \\
\hline
Precision
\end{mytable}
%\end{table}
\caption{Relative gain of the multisplitting algorithm compared with the classical GMRES}
- \label{table:01}
-\end{figure}
+ \label{tab:08}
+\end{table}
\section{Conclusion}
-CONCLUSION
+In this paper we have presented the simulation of the execution of three
+different parallel solvers on some multi-core architectures. We have show that
+the SimGrid toolkit is an interesting simulation tool that has allowed us to
+determine which method to choose given a specified multi-core architecture.
+Moreover the simulated results are in accordance (i.e. with the same order of
+magnitude) with the works presented in~\cite{couturier15}. Simulated results
+also confirm the efficiency of the asynchronous multisplitting
+algorithm compared to the synchronous GMRES especially in case of
+geographically distant clusters.
-\section*{Acknowledgment}
+These results are important since it is very time consuming to find optimal
+configuration and deployment requirements for a given application on a given
+multi-core architecture. Finding good resource allocations policies under
+varying CPU power, network speeds and loads is very challenging and labor
+intensive. This problematic is even more difficult for the asynchronous
+scheme where a small parameter variation of the execution platform and of the
+application data can lead to very different numbers of iterations to reach the
+converge and so to very different execution times.
+
+
+In future works, we plan to investigate how to simulate the behavior of really
+large scale applications. For example, if we are interested to simulate the
+execution of the solvers of this paper with thousand or even dozens of thousands
+or core, it is not possible to do that with SimGrid. In fact, this tool will
+make the real computation. So we plan to focus our research on that problematic.
-This work is partially funded by the Labex ACTION program (contract ANR-11-LABX-01-01).
+%\section*{Acknowledgment}
+\ack
+This work is partially funded by the Labex ACTION program (contract ANR-11-LABX-01-01).
+
\bibliographystyle{wileyj}
\bibliography{biblio}
+
\end{document}
%%% Local Variables:
