%\itshape{\journalnamelc}\footnotemark[2]}
\author{Charles Emile Ramamonjisoa\affil{1},
- David Laiymani\affil{1},
- Arnaud Giersch\affil{1},
- Lilia Ziane Khodja\affil{2} and
- Raphaël Couturier\affil{1}
+ Lilia Ziane Khodja\affil{2},
+ David Laiymani\affil{1},
+ Raphaël Couturier\affil{1} and
+ Arnaud Giersch\affil{1}
}
\address{
neighbors. Both communications and computations are \textit{asynchronous}
inducing that there is no more idle time, due to synchronizations, between two
iterations~\cite{bcvc06:ij}. This model presents some advantages and drawbacks
-that we detail in Section~\ref{sec:asynchro} but even if the number of
+that we detail in Section~\ref{sec:asynchro}. Even if the number of
iterations required to converge is generally greater than for the synchronous
case, it appears that the asynchronous iterative scheme can significantly
reduce overall execution times by suppressing idle times due to
solver~\cite{saad86} in synchronous mode. The simulation results allow us to
determine which method to choose for a given multi-core architecture.
Moreover the obtained results on different simulated multi-core architectures
-confirm the real results previously obtained on non simulated architectures.
+confirm the real results previously obtained on real physical architectures.
More precisely the simulated results are in accordance (i.e. with the same order
of magnitude) with the works presented in~\cite{couturier15}, which show that
the synchronous Krylov multisplitting method is more efficient than GMRES for large
Asynchronous iterative methods have been studied for many years theoretically and
practically. Many methods have been considered and convergence results have been
proved. These methods can be used to solve, in parallel, fixed point problems
-(i.e. problems for which the solution is $x^\star =f(x^\star)$. In practice,
+(i.e. problems for which the solution is $x^\star =f(x^\star)$). In practice,
asynchronous iteration methods can be used to solve, for example, linear and
non-linear systems of equations or optimization problems, interested readers are
invited to read~\cite{BT89,bahi07}.
algorithm that supports both the synchronous or the asynchronous iteration model
requires very few modifications to be able to be executed in both variants. In
practice, only the communications and convergence detection are different. In
-the synchronous mode, iterations are synchronized whereas in the asynchronous
-one, they are not. It should be noticed that non-blocking communications can be
+the synchronous mode iterations are synchronized, whereas in the asynchronous
+one they are not. It should be noticed that non-blocking communications can be
used in both modes. Concerning the convergence detection, synchronous variants
can use a global convergence procedure which acts as a global synchronization
point. In the asynchronous model, the convergence detection is more tricky as
architectures are often very important. So, prior to deployment and tests it
seems very promising to be able to simulate the behavior of asynchronous
iterative algorithms. The problematic is then to show that the results produced
-by simulation are in accordance with reality i.e. of the same order of
-magnitude. To our knowledge, there is no study on this problematic.
+by simulation are in accordance with reality (i.e. of the same order of
+magnitude). To our knowledge, there is no study on this problematic.
\section{SimGrid}
\label{sec:simgrid}
-SimGrid~\cite{SimGrid,casanova+legrand+quinson.2008.simgrid,casanova+giersch+legrand+al.2014.versatile} is a discrete event simulation framework to study the behavior of large-scale distributed computing platforms as Grids, Peer-to-Peer systems, Clouds and High Performance Computation systems. It is widely used to simulate and evaluate heuristics, prototype applications or even assess legacy MPI applications. It is still actively developed by the scientific community and distributed as an open source software.
+In the scope of this paper, we have chosen the SimGrid toolkit~\cite{SimGrid,casanova+giersch+legrand+al.2014.versatile} to simulate the behavior of parallel iterative linear solvers on different computational grid configurations. In opposite to the most simulators which are stayed very oriented-application, SimGrid framework is designed to study the behavior of many large-scale distributed computing platforms as Grids, Peer-to-Peer systems, Clouds or High Performance Computation systems. It is still actively developed by the scientific community and distributed as an open source software.
-%%%%%%%%%%%%%%%%%%%%%%%%%
-% SimGrid~\cite{SimGrid,casanova+legrand+quinson.2008.simgrid,casanova+giersch+legrand+al.2014.versatile}
-% is a simulation framework to study the behavior of large-scale distributed
-% systems. As its name suggests, it emanates from the grid computing community,
-% but is nowadays used to study grids, clouds, HPC or peer-to-peer systems. The
-% early versions of SimGrid date back from 1999, but it is still actively
-% developed and distributed as an open source software. Today, it is one of the
-% major generic tools in the field of simulation for large-scale distributed
-% systems.
-
-SimGrid provides several programming interfaces: MSG to simulate Concurrent
-Sequential Processes, SimDAG to simulate DAGs of (parallel) tasks, and SMPI to
-run real applications written in MPI~\cite{MPI}. Apart from the native C
-interface, SimGrid provides bindings for the C++, Java, Lua and Ruby programming
-languages. SMPI is the interface that has been used for the work described in
-this paper. The SMPI interface implements about \np[\%]{80} of the MPI 2.0
-standard~\cite{bedaride+degomme+genaud+al.2013.toward}, and supports
-applications written in C or Fortran, with little or no modifications (cf Section IV - paragraph B).
-
-Within SimGrid, the execution of a distributed application is simulated by a
-single process. The application code is really executed, but some operations,
-like communications, are intercepted, and their running time is computed
-according to the characteristics of the simulated execution platform. The
-description of this target platform is given as an input for the execution, by
-means of an XML file. It describes the properties of the platform, such as
-the computing nodes with their computing power, the interconnection links with
-their bandwidth and latency, and the routing strategy. The scheduling of the
-simulated processes, as well as the simulated running time of the application
-are computed according to these properties.
-
-To compute the durations of the operations in the simulated world, and to take
-into account resource sharing (e.g. bandwidth sharing between competing
-communications), SimGrid uses a fluid model. This allows users to run relatively fast
-simulations, while still keeping accurate
-results~\cite{bedaride+degomme+genaud+al.2013.toward,
- velho+schnorr+casanova+al.2013.validity}. Moreover, depending on the
-simulated application, SimGrid/SMPI allows to skip long lasting computations and
-to only take their duration into account. When the real computations cannot be
-skipped, but the results are unimportant for the simulation results, it is
-also possible to share dynamically allocated data structures between
-several simulated processes, and thus to reduce the whole memory consumption.
-These two techniques can help to run simulations on a very large scale.
-
-The validity of simulations with SimGrid has been asserted by several studies.
-See, for example, \cite{velho+schnorr+casanova+al.2013.validity} and articles
-referenced therein for the validity of the network models. Comparisons between
-real execution of MPI applications on the one hand, and their simulation with
-SMPI on the other hand, are presented in~\cite{guermouche+renard.2010.first,
- clauss+stillwell+genaud+al.2011.single,
- bedaride+degomme+genaud+al.2013.toward}. All these works conclude that
-SimGrid is able to simulate pretty accurately the real behavior of the
-applications.
+SimGrid provides four user interfaces which can be convenient for different distributed applications~\cite{casanova+legrand+quinson.2008.simgrid}. In this paper we are interested on the SMPI user interface (Simulator MPI) which implements about \np[\%]{80} of the MPI 2.0 standard and allows minor modifications of the initial code~\cite{bedaride+degomme+genaud+al.2013.toward} (see Section~\ref{sec:04.02}). SMPI enables the direct simulation of the execution, as in the real life, of an unmodified MPI distributed application, and gets accurate results with the detailed resources consumption.
+
+SimGrid simulator uses at least three XML input files describing the computational grid resources: the number of clusters in the grid, the number of processors/cores in each cluster, the detailed description of the intra and inter networks and the list of the hosts in each cluster (see the details in Section~\ref{sec:expe}). SimGrid uses a fluid model to simulate the program execution. It allows several simulation modes which produce accurate results~\cite{bedaride+degomme+genaud+al.2013.toward,velho+schnorr+casanova+al.2013.validity}. For instance, the "in vivo" mode really executes the computation but "intercepts" the communications (the execution time is then evaluated according to the parameters of the simulated platform). It is also possible for SimGrid/SMPI to only keep the duration of large computations by skipping them. Moreover the application can be run "in vitro" mode by sharing some in-memory structures between the simulated processes and thus allowing the use of very large-scale data.
+
+The choice of SimGrid/SMPI as a simulator tool in this study has been emphasized by the results obtained by several studies to validate, in the real environments, the behavior of different network models simulated in SimGrid~\cite{velho+schnorr+casanova+al.2013.validity}. Other studies underline the comparison between the real MPI application executions and the SimGrid/SMPI ones~\cite{guermouche+renard.2010.first,clauss+stillwell+genaud+al.2011.single,bedaride+degomme+genaud+al.2013.toward}. These works show the accuracy of SimGrid simulations compared to the executions on real physical architectures.
+
+
+
+
+
+
+
+
+
+
+
+
+
+%% In the scope of this paper, the SimGrid toolkit~\cite{SimGrid,casanova+legrand+quinson.2008.simgrid,casanova+giersch+legrand+al.2014.versatile},
+%% an open source framework actively developed by its scientific community, has been chosen to simulate the behavior of iterative linear solvers in different computational grid configurations. SimGrid pretends to be non-specialized in opposite to some other simulators which stayed to be very specific oriented-application. One of the well-known SimGrid advantage is its SMPI (Simulated MPI) user interface. SMPI purpose is to execute by simulation in a similar way as in real life, an MPI distributed application and to get accurate results with the detailed resources
+%% consumption.Several studies have demonstrated the accuracy of the simulation
+%% compared with execution on real physical architectures. In addition of SMPI,
+%% Simgrid provides other API which can be convienent for different distrbuted
+%% applications: computational grid applications, High Performance Computing (HPC),
+%% P2P but also clouds applications. In this paper we use the SMPI API. It
+%% implements about \np[\%]{80} of the MPI 2.0 standard and allows minor
+%% modifications of the initial code~\cite{bedaride+degomme+genaud+al.2013.toward}
+%% (see Section~\ref{sec:04.02}).
+
+
+%% Provided as an input to the simulator, at least $3$ XML files describe the
+%% computational grid resources: number of clusters in the grid, number of
+%% processors/cores in each cluster, detailed description of the intra and inter
+%% networks and the list of the hosts in each cluster (see the details in Section~\ref{sec:expe}). Simgrid uses a fluid model to simulate the program execution.
+%% This gives several simulation modes which produce accurate
+%% results~\cite{bedaride+degomme+genaud+al.2013.toward,
+%% velho+schnorr+casanova+al.2013.validity}. For instance, the "in vivo" mode
+%% really executes the computation but "intercepts" the communications (running
+%% time is then evaluated according to the parameters of the simulated platform).
+%% It is also possible for SimGrid/SMPI to only keep duration of large
+%% computations by skipping them. Moreover the application can be run "in vitro"
+%% by sharing some in-memory structures between the simulated processes and
+%% thus allowing the use of very large data scale.
+
+
+%% The choice of Simgrid/SMPI as a simulator tool in this study has been emphasized
+%% by the results obtained by several studies to validate, in real environments,
+%% the behavior of different network models simulated in
+%% Simgrid~\cite{velho+schnorr+casanova+al.2013.validity}. Other studies underline
+%% the comparison between real MPI executions and SimGrid/SMPI
+%% ones\cite{guermouche+renard.2010.first, clauss+stillwell+genaud+al.2011.single,
+%% bedaride+degomme+genaud+al.2013.toward}. These works show the accuracy of
+%% SimGrid simulations.
+
+
+
+
+
+
+% SimGrid~\cite{SimGrid,casanova+legrand+quinson.2008.simgrid,casanova+giersch+legrand+al.2014.versatile} is a discrete event simulation framework to study the behavior of large-scale distributed computing platforms as Grids, Peer-to-Peer systems, Clouds and High Performance Computation systems. It is widely used to simulate and evaluate heuristics, prototype applications or even assess legacy MPI applications. It is still actively developed by the scientific community and distributed as an open source software.
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%
+% % SimGrid~\cite{SimGrid,casanova+legrand+quinson.2008.simgrid,casanova+giersch+legrand+al.2014.versatile}
+% % is a simulation framework to study the behavior of large-scale distributed
+% % systems. As its name suggests, it emanates from the grid computing community,
+% % but is nowadays used to study grids, clouds, HPC or peer-to-peer systems. The
+% % early versions of SimGrid date back from 1999, but it is still actively
+% % developed and distributed as an open source software. Today, it is one of the
+% % major generic tools in the field of simulation for large-scale distributed
+% % systems.
+%
+% SimGrid provides several programming interfaces: MSG to simulate Concurrent
+% Sequential Processes, SimDAG to simulate DAGs of (parallel) tasks, and SMPI to
+% run real applications written in MPI~\cite{MPI}. Apart from the native C
+% interface, SimGrid provides bindings for the C++, Java, Lua and Ruby programming
+% languages. SMPI is the interface that has been used for the work described in
+% this paper. The SMPI interface implements about \np[\%]{80} of the MPI 2.0
+% standard~\cite{bedaride+degomme+genaud+al.2013.toward}, and supports
+% applications written in C or Fortran, with little or no modifications (cf Section IV - paragraph B).
+%
+% Within SimGrid, the execution of a distributed application is simulated by a
+% single process. The application code is really executed, but some operations,
+% like communications, are intercepted, and their running time is computed
+% according to the characteristics of the simulated execution platform. The
+% description of this target platform is given as an input for the execution, by
+% means of an XML file. It describes the properties of the platform, such as
+% the computing nodes with their computing power, the interconnection links with
+% their bandwidth and latency, and the routing strategy. The scheduling of the
+% simulated processes, as well as the simulated running time of the application
+% are computed according to these properties.
+%
+% To compute the durations of the operations in the simulated world, and to take
+% into account resource sharing (e.g. bandwidth sharing between competing
+% communications), SimGrid uses a fluid model. This allows users to run relatively fast
+% simulations, while still keeping accurate
+% results~\cite{bedaride+degomme+genaud+al.2013.toward,
+% velho+schnorr+casanova+al.2013.validity}. Moreover, depending on the
+% simulated application, SimGrid/SMPI allows to skip long lasting computations and
+% to only take their duration into account. When the real computations cannot be
+% skipped, but the results are unimportant for the simulation results, it is
+% also possible to share dynamically allocated data structures between
+% several simulated processes, and thus to reduce the whole memory consumption.
+% These two techniques can help to run simulations on a very large scale.
+%
+% The validity of simulations with SimGrid has been asserted by several studies.
+% See, for example, \cite{velho+schnorr+casanova+al.2013.validity} and articles
+% referenced therein for the validity of the network models. Comparisons between
+% real execution of MPI applications on the one hand, and their simulation with
+% SMPI on the other hand, are presented in~\cite{guermouche+renard.2010.first,
+% clauss+stillwell+genaud+al.2011.single,
+% bedaride+degomme+genaud+al.2013.toward}. All these works conclude that
+% SimGrid is able to simulate pretty accurately the real behavior of the
+% applications.
%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Two-stage multisplitting methods}
\centering
\includegraphics[width=100mm]{cluster_x_nodes_n1_x_n2.pdf}
\caption{Various grid configurations with two networks parameters: $N1$ vs. $N2$}
-\LZK{CE, remplacer les ``,'' des décimales par un ``.''}
-\RCE{ok}
+%\LZK{CE, remplacer les ``,'' des décimales par un ``.''}
+%\RCE{ok}
\label{fig:02}
\end{figure}
performance.
In this section, the SimGrid simulator is used to compare the behavior of the
-two-stage algorithm in asynchronous mode with GMRES in synchronous mode. Several
-benchmarks have been performed with various combinations of the grid resources
-(CPU, Network, matrix size, \ldots). The test conditions are summarized
-in Table~\ref{tab:02}. In order to compare the execution times. Table~\ref{tab:03}
-reports the relative gains between both algorithms. It is defined by the ratio
-between the execution time of GMRES and the execution time of the
-multisplitting.
-\LZK{Quelle table repporte les gains relatifs?? Sûrement pas Table II !!}
-\RCE{Table III avec la nouvelle numerotation}
-The ratio is greater than one because the asynchronous
-multisplitting version is faster than GMRES.
+two-stage algorithm in asynchronous mode with GMRES in synchronous mode.
+Several benchmarks have been performed with various combinations of the grid
+resources (CPU, Network, matrix size, \ldots). The test conditions are
+summarized in Table~\ref{tab:02}.
+
+
+
+%\LZK{Quelle table repporte les gains relatifs?? Sûrement pas Table II !!}
+%\RCE{Table III avec la nouvelle numerotation}
+
\begin{table}[htbp]
\centering
\label{tab:03}
\end{table}
-Again, comprehensive and extensive tests have been conducted with different
-parameters as the CPU power, the network parameters (bandwidth and latency)
-and with different problem size. The relative gains greater than $1$ between the
-two algorithms have been captured after each step of the test. In
-Table~\ref{tab:08} are reported the best grid configurations allowing
-the two-stage multisplitting algorithm to be more than $2.5$ times faster than the
-classical GMRES. These experiments also show the relative tolerance of the
-multisplitting algorithm when using a low speed network as usually observed with
-geographically distant clusters through the internet.
+
+Table~\ref{tab:03} reports the relative gains between both algorithms. It is
+defined by the ratio between the execution time of GMRES and the execution time
+of the multisplitting. The ratio is greater than one because the asynchronous
+multisplitting version is faster than GMRES. In average, the two-stage
+multisplitting algorithm to be more than $2.5$ times faster than the classical
+GMRES. These experiments also show the relative tolerance of the multisplitting
+algorithm when using a low speed network as usually observed with geographically
+distant clusters through the internet.
\section{Conclusion}
