% Extension pour les liens intra-documents (tagged PDF)
% et l'affichage correct des URL (commande \url{http://example.com})
%\usepackage{hyperref}
+\usepackage{multirow}
+
\usepackage{url}
\DeclareUrlCommand\email{\urlstyle{same}}
%% help developers to better tune their applications for a given multi-core
%% architecture.
-%% In this paper we focus our attention on the simulation of iterative algorithms to solve sparse linear systems on large clusters. We study the behavior of the widely used GMRES algorithm and two different variants of the Multisplitting algorithms: one using synchronous iterations and another one with asynchronous iterations.
+%% In this paper we focus our attention on the simulation of iterative algorithms to solve sparse linear systems on large clusters. We study the behavior of the widely used GMRES algorithm and two different variants of the Multisplitting algorithms: one using synchronous iterations and another one with asynchronous iterations.
%% For each algorithm we have simulated
%% different architecture parameters to evaluate their influence on the overall
-%% execution time.
+%% execution time.
%% The simulations confirm the real results previously obtained on different real multi-core architectures and also confirm the efficiency of the asynchronous Multisplitting algorithm on distant clusters compared to the synchronous GMRES algorithm.
+The behavior of multi-core applications is always a challenge to predict, especially with a new architecture for which no experiment has been performed. With some applications, it is difficult, if not impossible, to build accurate performance models. That is why another solution is to use a simulation tool which allows us to change many parameters of the architecture (network bandwidth, latency, number of processors) and to simulate the execution of such applications.
-The behavior of multi-core applications is always a challenge to predict, especially with a new architecture for which no experiment has been performed. With some applications, it is difficult, if not impossible, to build accurate performance models. That is why another solution is to use a simulation tool which allows us to change many parameters of the architecture (network bandwidth, latency, number of processors) and to simulate the execution of such applications.
+In this paper we focus on the simulation of iterative algorithms to solve sparse linear systems. We study the behavior of the GMRES algorithm and two different variants of the multisplitting algorithms: using synchronous or asynchronous iterations. For each algorithm we have simulated different architecture parameters to evaluate their influence on the overall execution time. The simulations confirm the real results previously obtained on different real multi-core architectures and also confirm the efficiency of the asynchronous multisplitting algorithm on distant clusters compared to the GMRES algorithm.
-In this paper we focus on the simulation of iterative algorithms to solve sparse linear systems. We study the behavior of the GMRES algorithm and two different variants of the Multisplitting algorithms: using synchronous or asynchronous iterations. For each algorithm we have simulated different architecture parameters to evaluate their influence on the overall execution time. The simulations confirm the real results previously obtained on different real multi-core architectures and also confirm the efficiency of the asynchronous Multisplitting algorithm on distant clusters compared to the GMRES algorithm.
\end{abstract}
%\keywords{Algorithm; distributed; iterative; asynchronous; simulation; simgrid;
from its neighbors. We say that the iteration computation follows a
\textit{synchronous} scheme. In the asynchronous scheme a task can compute a new
iteration without having to wait for the data dependencies coming from its
-neighbors. Both communication and computations are \textit{asynchronous}
+neighbors. Both communications and computations are \textit{asynchronous}
inducing that there is no more idle time, due to synchronizations, between two
iterations~\cite{bcvc06:ij}. This model presents some advantages and drawbacks
-that we detail in section~\ref{sec:asynchro} but even if the number of
+that we detail in Section~\ref{sec:asynchro} but even if the number of
iterations required to converge is generally greater than for the synchronous
case, it appears that the asynchronous iterative scheme can significantly
reduce overall execution times by suppressing idle times due to
challenging and labor intensive~\cite{Calheiros:2011:CTM:1951445.1951450}. This
problematic is even more difficult for the asynchronous scheme where a small
parameter variation of the execution platform and of the application data can
-lead to very different numbers of iterations to reach the converge and so to
+lead to very different numbers of iterations to reach the convergence and so to
very different execution times. In this challenging context we think that the
use of a simulation tool can greatly leverage the possibility of testing various
platform scenarios.
The {\bf main contribution of this paper} is to show that the use of a
simulation tool (i.e. the SimGrid toolkit~\cite{SimGrid}) in the context of real
parallel applications (i.e. large linear system solvers) can help developers to
-better tune their application for a given multi-core architecture. To show the
+better tune their applications for a given multi-core architecture. To show the
validity of this approach we first compare the simulated execution of the Krylov
-multisplitting algorithm with the GMRES (Generalized Minimal Residual)
+multisplitting algorithm with the GMRES (Generalized Minimal RESidual)
solver~\cite{saad86} in synchronous mode. The simulation results allow us to
-determine which method to choose given a specified multi-core architecture.
+determine which method to choose for a given multi-core architecture.
Moreover the obtained results on different simulated multi-core architectures
confirm the real results previously obtained on non simulated architectures.
More precisely the simulated results are in accordance (i.e. with the same order
of magnitude) with the works presented in~\cite{couturier15}, which show that
-the synchronous multisplitting method is more efficient than GMRES for large
+the synchronous Krylov multisplitting method is more efficient than GMRES for large
scale clusters. Simulated results also confirm the efficiency of the
asynchronous multisplitting algorithm compared to the synchronous GMRES
especially in case of geographically distant clusters.
This paper is organized as follows. Section~\ref{sec:asynchro} presents the
iteration model we use and more particularly the asynchronous scheme. In
-section~\ref{sec:simgrid} the SimGrid simulation toolkit is presented.
+Section~\ref{sec:simgrid} the SimGrid simulation toolkit is presented.
Section~\ref{sec:04} details the different solvers that we use. Finally our
-experimental results are presented in section~\ref{sec:expe} followed by some
+experimental results are presented in Section~\ref{sec:expe} followed by some
concluding remarks and perspectives.
\section{The asynchronous iteration model and the motivations of our work}
\label{sec:asynchro}
-Asynchronous iterative methods have been studied for many years theoritecally and
+Asynchronous iterative methods have been studied for many years theoretically and
practically. Many methods have been considered and convergence results have been
proved. These methods can be used to solve, in parallel, fixed point problems
(i.e. problems for which the solution is $x^\star =f(x^\star)$. In practice,
-asynchronous iterations methods can be used to solve, for example, linear and
+asynchronous iteration methods can be used to solve, for example, linear and
non-linear systems of equations or optimization problems, interested readers are
invited to read~\cite{BT89,bahi07}.
requires very few modifications to be able to be executed in both variants. In
practice, only the communications and convergence detection are different. In
the synchronous mode, iterations are synchronized whereas in the asynchronous
-one, they are not. It should be noticed that non blocking communications can be
+one, they are not. It should be noticed that non-blocking communications can be
used in both modes. Concerning the convergence detection, synchronous variants
can use a global convergence procedure which acts as a global synchronization
point. In the asynchronous model, the convergence detection is more tricky as
consult~\cite{myBCCV05c,bahi07,ccl09:ij}.
The number of iterations required to reach the convergence is generally greater
-for the asynchronous scheme (this number depends depends on the delay of the
+for the asynchronous scheme (this number depends on the delay of the
messages). Note that, it is not the case in the synchronous mode where the
number of iterations is the same than in the sequential mode. In this way, the
set of the parameters of the platform (number of nodes, power of nodes,
-inter and intra clusters bandwidth and latency, \ldots) and of the
+inter and intra clusters bandwidth and latency,~\ldots) and of the
application can drastically change the number of iterations required to get the
convergence. It follows that asynchronous iterative algorithms are difficult to
optimize since the financial and deployment costs on large scale multi-core
-architecture are often very important. So, prior to delpoyment and tests it
+architectures are often very important. So, prior to deployment and tests it
seems very promising to be able to simulate the behavior of asynchronous
-iterative algorithms. The problematic is then to show that the results produce
+iterative algorithms. The problematic is then to show that the results produced
by simulation are in accordance with reality i.e. of the same order of
magnitude. To our knowledge, there is no study on this problematic.
A_{\ell\ell} x_\ell = c_\ell,\mbox{~for~}\ell=1,\ldots,L,
\label{eq:03}
\end{equation}
-where right-hand sides $c_\ell=b_\ell-\sum_{m\neq\ell}A_{\ell m}x_m$ are computed using the shared vectors $x_m$. In this paper, we use the well-known iterative method GMRES ({\it Generalized Minimal RESidual})~\cite{saad86} as an inner iteration to approximate the solutions of the different splittings arising from the block Jacobi multisplitting of matrix $A$. The algorithm in Figure~\ref{alg:01} shows the main key points of our block Jacobi two-stage method executed by a cluster of processors. In line~\ref{solve}, the linear sub-system~(\ref{eq:03}) is solved in parallel using GMRES method where $\MIG$ and $\TOLG$ are the maximum number of inner iterations and the tolerance threshold for GMRES respectively. The convergence of the two-stage multisplitting methods, based on synchronous or asynchronous iterations, has been studied by many authors for example~\cite{Bru95,bahi07}.
+where right-hand sides $c_\ell=b_\ell-\sum_{m\neq\ell}A_{\ell m}x_m$ are computed using the shared vectors $x_m$. In this paper, we use the well-known iterative method GMRES~\cite{saad86} as an inner iteration to approximate the solutions of the different splittings arising from the block Jacobi multisplitting of matrix $A$. The algorithm in Figure~\ref{alg:01} shows the main key points of our block Jacobi two-stage method executed by a cluster of processors. In line~\ref{solve}, the linear sub-system~(\ref{eq:03}) is solved in parallel using GMRES method where $\MIG$ and $\TOLG$ are the maximum number of inner iterations and the tolerance threshold for GMRES respectively. The convergence of the two-stage multisplitting methods, based on synchronous or asynchronous iterations, has been studied by many authors for example~\cite{Bru95,bahi07}.
-\begin{figure}[t]
+\begin{figure}[htpb]
%\begin{algorithm}[t]
%\caption{Block Jacobi two-stage multisplitting method}
\begin{algorithmic}[1]
\end{equation}
The algorithm in Figure~\ref{alg:02} includes the procedure of the residual minimization and the outer iteration is restarted with a new approximation $\tilde{x}$ at every $s$ iterations. The least-squares problem~(\ref{eq:06}) is solved in parallel by all clusters using CGLS method~\cite{Hestenes52} such that $\MIC$ is the maximum number of iterations and $\TOLC$ is the tolerance threshold for this method (line~\ref{cgls} in Figure~\ref{alg:02}).
-\begin{figure}[t]
+\begin{figure}[htbp]
%\begin{algorithm}[t]
%\caption{Krylov two-stage method using block Jacobi multisplitting}
\begin{algorithmic}[1]
\subsection{Simulation of the two-stage methods using SimGrid toolkit}
\label{sec:04.02}
-One of our objectives when simulating the application in Simgrid is, as in real
+One of our objectives when simulating the application in SimGrid is, as in real
life, to get accurate results (solutions of the problem) but also to ensure the
test reproducibility under the same conditions. According to our experience,
-very few modifications are required to adapt a MPI program for the Simgrid
+very few modifications are required to adapt a MPI program for the SimGrid
simulator using SMPI (Simulator MPI). The first modification is to include SMPI
-libraries and related header files (smpi.h). The second modification is to
+libraries and related header files (\verb+smpi.h+). The second modification is to
suppress all global variables by replacing them with local variables or using a
-Simgrid selector called "runtime automatic switching"
+SimGrid selector called "runtime automatic switching"
(smpi/privatize\_global\_variables). Indeed, global variables can generate side
effects on runtime between the threads running in the same process and generated by
-Simgrid to simulate the grid environment.
-
-%\RC{On vire cette phrase ?} \RCE {Si c'est la phrase d'avant sur les threads, je pense qu'on peut la retenir car c'est l'explication du pourquoi Simgrid n'aime pas les variables globales. Si c'est pas bien dit, on peut la reformuler. Si c'est la phrase ci-apres, effectivement, on peut la virer si elle preterais a discussion}The
-%last modification on the MPI program pointed out for some cases, the review of
-%the sequence of the MPI\_Isend, MPI\_Irecv and MPI\_Waitall instructions which
-%might cause an infinite loop.
+SimGrid to simulate the grid environment.
-
-\paragraph{Simgrid Simulator parameters}
-\ \\ \noindent Before running a Simgrid benchmark, many parameters for the
+\paragraph{Parameters of the simulation in SimGrid}
+\ \\ \noindent Before running a SimGrid benchmark, many parameters for the
computation platform must be defined. For our experiments, we consider platforms
in which several clusters are geographically distant, so there are intra and
inter-cluster communications. In the following, these parameters are described:
\begin{itemize}
- \item hostfile: hosts description file.
+ \item hostfile: hosts description file,
\item platform: file describing the platform architecture: clusters (CPU power,
-\dots{}), intra cluster network description, inter cluster network (bandwidth bw,
-latency lat, \dots{}).
+\dots{}), intra cluster network description, inter cluster network (bandwidth $bw$,
+latency $lat$, \dots{}),
\item archi : grid computational description (number of clusters, number of
-nodes/processors for each cluster).
+nodes/processors in each cluster).
\end{itemize}
\noindent
In addition, the following arguments are given to the programs at runtime:
\begin{itemize}
\item maximum number of inner iterations $\MIG$ and outer iterations $\MIM$,
\item inner precision $\TOLG$ and outer precision $\TOLM$,
- \item matrix sizes of the 3D Poisson problem: N$_{x}$, N$_{y}$ and N$_{z}$ on axis $x$, $y$ and $z$ respectively,
- \item matrix diagonal value is fixed to $6.0$ for synchronous Krylov multisplitting experiments and $6.2$ for asynchronous block Jacobi experiments,
+ \item matrix sizes of the problem: N$_{x}$, N$_{y}$ and N$_{z}$ on axis $x$, $y$ and $z$ respectively (in our experiments, we solve 3D problem, see Section~\ref{3dpoisson}),
+ \item matrix diagonal value is fixed to $6.0$ for synchronous experiments and $6.2$ for asynchronous ones,
\item matrix off-diagonal value is fixed to $-1.0$,
\item number of vectors in matrix $S$ (i.e. value of $s$),
\item maximum number of iterations $\MIC$ and precision $\TOLC$ for CGLS method,
\item execution mode: synchronous or asynchronous.
\end{itemize}
-It should also be noticed that both solvers have been executed with the Simgrid selector \texttt{-cfg=smpi/running\_power} which determines the computational power (here 19GFlops) of the simulator host machine.
+It should also be noticed that both solvers have been executed with the SimGrid selector \texttt{-cfg=smpi/running\_power} which determines the computational power (here 19GFlops) of the simulator host machine.
%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%
-\section{Experimental Results}
+\section{Experimental results}
\label{sec:expe}
-In this section, experiments for both Multisplitting algorithms are reported. First the 3D Poisson problem used in our experiments is described.
+In this section, experiments for both multisplitting algorithms are reported. First the 3D Poisson problem used in our experiments is described.
\subsection{The 3D Poisson problem}
-
-
+\label{3dpoisson}
We use our two-stage algorithms to solve the well-known Poisson problem $\nabla^2\phi=f$~\cite{Polyanin01}. In three-dimensional Cartesian coordinates in $\mathbb{R}^3$, the problem takes the following form:
\begin{equation}
\frac{\partial^2}{\partial x^2}\phi(x,y,z)+\frac{\partial^2}{\partial y^2}\phi(x,y,z)+\frac{\partial^2}{\partial z^2}\phi(x,y,z)=f(x,y,z)\mbox{~in the domain~}\Omega
\end{equation}
until convergence where $h$ is the grid spacing between two adjacent elements in the 3D computational grid.
-In the parallel context, the 3D Poisson problem is partitioned into $L\times p$ sub-problems such that $L$ is the number of clusters and $p$ is the number of processors in each cluster. We apply the three-dimensional partitioning instead of the row-by-row one in order to reduce the size of the data shared at the sub-problems boundaries. In this case, each processor is in charge of parallelepipedic block of the problem and has at most six neighbors in the same cluster or in distant clusters with which it shares data at boundaries.
+In the parallel context, the 3D Poisson problem is partitioned into $L\times p$
+sub-problems such that $L$ is the number of clusters and $p$ is the number of
+processors in each cluster. We apply the three-dimensional partitioning instead
+of the row-by-row one in order to reduce the size of the data shared at the
+sub-problems boundaries. In this case, each processor is in charge of
+parallelepipedic block of the problem and has at most six neighbors in the same
+cluster or in distant clusters with which it shares data at boundaries.
\subsection{Study setup and simulation methodology}
\textbf{Step 2}: Collect the software materials needed for the experimentation.
In our case, we have two variants algorithms for the resolution of the
-3D-Poisson problem: (1) using the classical GMRES; (2) and the Multisplitting
-method. In addition, the Simgrid simulator has been chosen to simulate the
-behaviors of the distributed applications. Simgrid is running in a virtual
+3D-Poisson problem: (1) using the classical GMRES; (2) and the multisplitting
+method. In addition, the SimGrid simulator has been chosen to simulate the
+behaviors of the distributed applications. SimGrid is running in a virtual
machine on a simple laptop. \\
\textbf{Step 3}: Fix the criteria which will be used for the future
on the one hand the algorithm execution mode (synchronous and asynchronous)
and on the other hand the execution time and the number of iterations to reach the convergence. \\
-\textbf{Step 4 }: Set up the different grid testbed environments that will be
-simulated in the simulator tool to run the program. The following architecture
-has been configured in Simgrid : 2x16, 4x8, 4x16, 8x8 and 2x50. The first number
+\textbf{Step 4}: Set up the different grid testbed environments that will be
+simulated in the simulator tool to run the program. The following architectures
+have been configured in SimGrid : 2$\times$16, 4$\times$8, 4$\times$16, 8$\times$8 and 2$\times$50. The first number
represents the number of clusters in the grid and the second number represents
-the number of hosts (processors/cores) in each cluster. The network has been
-designed to operate with a bandwidth equals to 10Gbits (resp. 1Gbits/s) and a
-latency of 8.10$^{-6}$ seconds (resp. 5.10$^{-5}$) for the intra-clusters links
-(resp. inter-clusters backbone links). \\
+the number of hosts (processors/cores) in each cluster. \\
\textbf{Step 5}: Conduct an extensive and comprehensive testings
within these configurations by varying the key parameters, especially
\textbf{Step 6} : Collect and analyze the output results.
-\subsection{Factors impacting distributed applications performance in
-a grid environment}
+\subsection{Factors impacting distributed applications performance in a grid environment}
When running a distributed application in a computational grid, many factors may
have a strong impact on the performance. First of all, the architecture of the
is the network configuration. Two main network parameters can modify drastically
the program output results:
\begin{enumerate}
-\item the network bandwidth (bw=bits/s) also known as "the data-carrying
+\item the network bandwidth ($bw$ in bits/s) also known as "the data-carrying
capacity" of the network is defined as the maximum of data that can transit
from one point to another in a unit of time.
-\item the network latency (lat : microsecond) defined as the delay from the
+\item the network latency ($lat$ in microseconds) defined as the delay from the
start time to send a simple data from a source to a destination.
\end{enumerate}
Upon the network characteristics, another impacting factor is the volume of data exchanged between the nodes in the cluster
and between distant clusters. This parameter is application dependent.
- In a grid environment, it is common to distinguish, on the one hand, the
- "intra-network" which refers to the links between nodes within a cluster and
- on the other hand, the "inter-network" which is the backbone link between
- clusters. In practice, these two networks have different speeds.
- The intra-network generally works like a high speed local network with a
- high bandwith and very low latency. In opposite, the inter-network connects
- clusters sometime via heterogeneous networks components throuth internet with
- a lower speed. The network between distant clusters might be a bottleneck
- for the global performance of the application.
-
-\subsection{Comparison of GMRES and Krylov Multisplitting algorithms in synchronous mode}
-
-In the scope of this paper, our first objective is to analyze when the Krylov
-Multisplitting method has better performance than the classical GMRES
-method. With a synchronous iterative method, better performance means a
-smaller number of iterations and execution time before reaching the convergence.
-For a systematic study, the experiments should figure out that, for various
-grid parameters values, the simulator will confirm the targeted outcomes,
-particularly for poor and slow networks, focusing on the impact on the
-communication performance on the chosen class of algorithm.
-
-The following paragraphs present the test conditions, the output results
-and our comments.\\
-
-
-\subsubsection{Execution of the algorithms on various computational grid
-architectures and scaling up the input matrix size}
-\ \\
-% environment
+ In a grid environment, it is common to distinguish, on one hand, the
+ \textit{intra-network} which refers to the links between nodes within a
+ cluster and on the other hand, the \textit{inter-network} which is the
+ backbone link between clusters. In practice, these two networks have
+ different speeds. The intra-network generally works like a high speed
+ local network with a high bandwidth and very low latency. In opposite, the
+ inter-network connects clusters sometime via heterogeneous networks components
+ through internet with a lower speed. The network between distant clusters
+ might be a bottleneck for the global performance of the application.
+
+
+\subsection{Comparison between GMRES and two-stage multisplitting algorithms in
+synchronous mode}
+In the scope of this paper, our first objective is to analyze
+when the synchronous Krylov two-stage method has better performance than the
+classical GMRES method. With a synchronous iterative method, better performance
+means a smaller number of iterations and execution time before reaching the
+convergence.
+
+Table~\ref{tab:01} summarizes the parameters used in the different simulations:
+the grid architectures (i.e. the number of clusters and the number of nodes per
+cluster), the network of inter-clusters backbone links and the matrix sizes of
+the 3D Poisson problem. However, for all simulations we fix the network
+parameters of the intra-clusters links: the bandwidth $bw$=10Gbs and the latency
+$lat=8\mu$s. In what follows, we will present the test conditions, the output
+results and our comments.
\begin{table} [ht!]
\begin{center}
-\begin{tabular}{r c }
- \hline
- Grid Architecture & 2x16, 4x8, 4x16 and 8x8\\ %\hline
- Network & N2 : bw=1Gbits/s - lat=5.10$^{-5}$ \\ %\hline
- Input matrix size & N$_{x}$ $\times$ N$_{y}$ $\times$ N$_{z}$ =150 $\times$ 150 $\times$ 150\\ %\hline
- - & N$_{x}$ $\times$ N$_{y}$ $\times$ N$_{z}$ =170 $\times$ 170 $\times$ 170 \\ \hline
- \end{tabular}
-\caption{Test conditions: various grid configurations with the input matix size N$_{x}$=150 or N$_{x}$=170 \RC{N2 n'est pas défini..}\RC{Nx est défini, Ny? Nz?}
-\AG{La lettre 'x' n'est pas le symbole de la multiplication. Utiliser \texttt{\textbackslash times}. Idem dans le texte, les figures, etc.}}
+\begin{tabular}{ll}
+\hline
+Grid architecture & 2$\times$16, 4$\times$8, 4$\times$16 and 8$\times$8\\
+\multirow{2}{*}{Network inter-clusters} & $N1$: $bw$=10Gbs, $lat=8\mu$s \\
+ & $N2$: $bw$=1Gbs, $lat=50\mu$s \\
+\multirow{2}{*}{Matrix size} & $Mat1$: N$_{x}\times$N$_{y}\times$N$_{z}$=150$\times$150$\times$150\\
+ & $Mat2$: N$_{x}\times$N$_{y}\times$N$_{z}$=170$\times$170$\times$170 \\ \hline
+\end{tabular}
+\caption{Parameters for the different simulations}
\label{tab:01}
\end{center}
\end{table}
-
-
-
-
-In this section, we analyze the performance of algorithms running on various
-grid configurations (2x16, 4x8, 4x16 and 8x8). First, the results in Figure~\ref{fig:01}
-show for all grid configurations the non-variation of the number of iterations of
-classical GMRES for a given input matrix size; it is not the case for the
-multisplitting method.
-
-\RC{CE attention tu n'as pas mis de label dans tes figures, donc c'est le bordel, j'en mets mais vérifie...}
-\RC{Les légendes ne sont pas explicites...}
-
-
-\begin{figure} [ht!]
- \begin{center}
- \includegraphics[width=100mm]{cluster_x_nodes_nx_150_and_nx_170.pdf}
- \end{center}
- \caption{Various grid configurations with the input matrix size $N_{x}=150$ and $N_{x}=170$\RC{idem}
-\AG{Utiliser le point comme séparateur décimal et non la virgule. Idem dans les autres figures.}}
- \label{fig:01}
-\end{figure}
-
-
-The execution times between the two algorithms is significant with different
-grid architectures, even with the same number of processors (for example, 2x16
-and 4x8). We can observ the low sensitivity of the Krylov multisplitting method
-(compared with the classical GMRES) when scaling up the number of the processors
-in the grid: in average, the GMRES (resp. Multisplitting) algorithm performs
-$40\%$ better (resp. $48\%$) when running from 2x16=32 to 8x8=64 processors. \RC{pas très clair, c'est pas précis de dire qu'un algo perform mieux qu'un autre, selon quel critère?}
-
-\subsubsection{Running on two different inter-clusters network speeds \\}
-
-\begin{table} [ht!]
+\subsubsection{Simulations for various grid architectures and scaling-up matrix sizes\\}
+
+In this section, we analyze the simulations conducted on various grid
+configurations and for different sizes of the 3D Poisson problem. The parameters
+of the network between clusters is fixed to $N2$ (see
+Table~\ref{tab:01}). Figure~\ref{fig:01} shows, for all grid configurations and
+a given matrix size of 170$^3$ elements, a non-variation in the number of
+iterations for the classical GMRES algorithm, which is not the case of the
+Krylov two-stage algorithm. In fact, with multisplitting algorithms, the number
+of splitting (in our case, it is equal to the number of clusters) influences on the
+convergence speed. The higher the number of splitting is, the slower the
+convergence of the algorithm is (see the output results obtained from
+configurations 2$\times$16 vs. 4$\times$8 and configurations 4$\times$16 vs.
+8$\times$8).
+
+The execution times between both algorithms is significant with different grid
+architectures. The synchronous Krylov two-stage algorithm presents better
+performances than the GMRES algorithm, even for a high number of clusters (about
+$32\%$ more efficient on a grid of 8$\times$8 than GMRES). In addition, we can
+observe a better sensitivity of the Krylov two-stage algorithm (compared to the
+GMRES one) when scaling up the number of the processors in the computational
+grid: the Krylov two-stage algorithm is about $48\%$ and the GMRES algorithm is
+about $40\%$ better on $64$ processors (grid of 8$\times$8) than $32$ processors
+(grid of 2$\times$16).
+
+\begin{figure}[ht]
\begin{center}
-\begin{tabular}{r c }
- \hline
- Grid Architecture & 2x16, 4x8\\ %\hline
- Network & N1 : bw=10Gbs-lat=8.10$^{-6}$ \\ %\hline
- - & N2 : bw=1Gbs-lat=5.10$^{-5}$ \\
- Input matrix size & $N_{x} \times N_{y} \times N_{z} =150 \times 150 \times 150$\\ \hline
- \end{tabular}
-\caption{Test conditions: grid 2x16 and 4x8 with networks N1 vs N2}
-\label{tab:02}
+\includegraphics[width=100mm]{cluster_x_nodes_nx_150_and_nx_170.pdf}
\end{center}
-\end{table}
-
-These experiments compare the behavior of the algorithms running first on a
-speed inter-cluster network (N1) and also on a less performant network (N2). \RC{Il faut définir cela avant...}
-Figure~\ref{fig:02} shows that end users will reduce the execution time
-for both algorithms when using a grid architecture like 4x16 or 8x8: the reduction is about $2$. The results depict also that when
-the network speed drops down (variation of 12.5\%), the difference between the two Multisplitting algorithms execution times can reach more than 25\%.
-
-
+\caption{Various grid configurations with two matrix sizes: $150^3$ and $170^3$}
+\label{fig:01}
+\end{figure}
-%\begin{wrapfigure}{l}{100mm}
-\begin{figure} [ht!]
+\subsubsection{Simulations for two different inter-clusters network speeds\\}
+In Figure~\ref{fig:02} we present the execution times of both algorithms to
+solve a 3D Poisson problem of size $150^3$ on two different simulated network
+$N1$ and $N2$ (see Table~\ref{tab:01}). As previously mentioned, we can see from
+this figure that the Krylov two-stage algorithm is sensitive to the number of
+clusters (i.e. it is better to have a small number of clusters). However, we can
+notice an interesting behavior of the Krylov two-stage algorithm. It is less
+sensitive to bad network bandwidth and latency for the inter-clusters links than
+the GMRES algorithms. This means that the multisplitting methods are more
+efficient for distributed systems with high latency networks.
+
+\begin{figure}[ht]
\centering
\includegraphics[width=100mm]{cluster_x_nodes_n1_x_n2.pdf}
-\caption{Grid 2x16 and 4x8 with networks N1 vs N2
-\AG{\np{8E-6}, \np{5E-6} au lieu de 8E-6, 5E-6}}
+\caption{Various grid configurations with two networks parameters: $N1$ vs. $N2$}
+\LZK{CE, remplacer les ``,'' des décimales par un ``.''}
+\RCE{ok}
\label{fig:02}
\end{figure}
-%\end{wrapfigure}
+\subsubsection{Network latency impacts on performances\\}
+Figure~\ref{fig:03} shows the impact of the network latency on the performances of both algorithms. The simulation is conducted on a computational grid of 2 clusters of 16 processors each (i.e. configuration 2$\times$16) interconnected by a network of bandwidth $bw$=1Gbs to solve a 3D Poisson problem of size $150^3$. According to the results, a degradation of the network latency from $8\mu$s to $60\mu$s implies an absolute execution time increase for both algorithms, but not with the same rate of degradation. The GMRES algorithm is more sensitive to the latency degradation than the Krylov two-stage algorithm.
-\subsubsection{Network latency impacts on performance}
-\ \\
-\begin{table} [ht!]
-\centering
-\begin{tabular}{r c }
- \hline
- Grid Architecture & 2x16\\ %\hline
- Network & N1 : bw=1Gbs \\ %\hline
- Input matrix size & $N_{x} \times N_{y} \times N_{z} = 150 \times 150 \times 150$\\ \hline
- \end{tabular}
-\caption{Test conditions: network latency impacts}
-\label{tab:03}
-\end{table}
-
-
-
-\begin{figure} [ht!]
+\begin{figure}[ht]
\centering
\includegraphics[width=100mm]{network_latency_impact_on_execution_time.pdf}
-\caption{Network latency impacts on execution time
-\AG{\np{E-6}}}
+\caption{Network latency impacts on performances}
\label{fig:03}
\end{figure}
+\subsubsection{Network bandwidth impacts on performances\\}
-According to the results of Figure~\ref{fig:03}, a degradation of the network
-latency from $8.10^{-6}$ to $6.10^{-5}$ implies an absolute time increase of
-more than $75\%$ (resp. $82\%$) of the execution for the classical GMRES
-(resp. Krylov multisplitting) algorithm. In addition, it appears that the
-Krylov multisplitting method tolerates more the network latency variation with a
-less rate increase of the execution time.\RC{Les 2 précédentes phrases me
- semblent en contradiction....} Consequently, in the worst case ($lat=6.10^{-5
-}$), the execution time for GMRES is almost the double than the time of the
-Krylov multisplitting, even though, the performance was on the same order of
-magnitude with a latency of $8.10^{-6}$.
+Figure~\ref{fig:04} reports the results obtained for the simulation of a grid of
+$2\times16$ processors interconnected by a network of latency $lat=50\mu$s to
+solve a 3D Poisson problem of size $150^3$. The results of increasing the
+network bandwidth from $1$Gbs to $10$Gbs show the performances improvement for
+both algorithms by reducing the execution times. However, the Krylov two-stage
+algorithm presents a better performance gain in the considered bandwidth
+interval with a gain of $40\%$ compared to only about $24\%$ for the classical
+GMRES algorithm.
-\subsubsection{Network bandwidth impacts on performance}
-\ \\
-\begin{table} [ht!]
-\centering
-\begin{tabular}{r c }
- \hline
- Grid Architecture & 2x16\\ %\hline
- Network & N1 : bw=1Gbs - lat=5.10$^{-5}$ \\ %\hline
- Input matrix size & $N_{x} \times N_{y} \times N_{z} =150 \times 150 \times 150$\\ \hline \\
- \end{tabular}
-\caption{Test conditions: Network bandwidth impacts\RC{Qu'est ce qui varie ici? Il n'y a pas de variation dans le tableau}}
-\label{tab:04}
-\end{table}
-
-
-\begin{figure} [ht!]
+\begin{figure}[ht]
\centering
\includegraphics[width=100mm]{network_bandwith_impact_on_execution_time.pdf}
-\caption{Network bandwith impacts on execution time
-\AG{``Execution time'' avec un 't' minuscule}. Idem autres figures.}
+\caption{Network bandwith impacts on performances}
\label{fig:04}
\end{figure}
-The results of increasing the network bandwidth show the improvement of the
-performance for both algorithms by reducing the execution time (see
-Figure~\ref{fig:04}). However, in this case, the Krylov multisplitting method
-presents a better performance in the considered bandwidth interval with a gain
-of $40\%$ which is only around $24\%$ for the classical GMRES.
-
-\subsubsection{Input matrix size impacts on performance}
-\ \\
-\begin{table} [ht!]
-\centering
-\begin{tabular}{r c }
- \hline
- Grid Architecture & 4x8\\ %\hline
- Network & N2 : bw=1Gbs - lat=5.10$^{-5}$ \\
- Input matrix size & $N_{x}$ = From 40 to 200\\ \hline
- \end{tabular}
-\caption{Test conditions: Input matrix size impacts}
-\label{tab:05}
-\end{table}
-
-
-\begin{figure} [ht!]
+\subsubsection{Matrix size impacts on performances\\}
+
+In these experiments, the matrix size of the 3D Poisson problem is varied from
+$50^3$ to $190^3$ elements. The simulated computational grid is composed of $4$
+clusters of $8$ processors each interconnected by the network $N2$ (see
+Table~\ref{tab:01}). As shown in Figure~\ref{fig:05}, the execution
+times for both algorithms increase with increased matrix sizes. For all problem
+sizes, the GMRES algorithm is always slower than the Krylov two-stage algorithm.
+Moreover, for this benchmark, it seems that the greater the problem size is, the
+bigger the ratio between execution times of both algorithms is. We can also
+observe that for some problem sizes, the convergence (and thus the execution
+time) of the Krylov two-stage algorithm varies quite a lot.
+%This is due to the 3D partitioning of the 3D matrix of the Poisson problem.
+These findings may help a lot end users to setup the best and the optimal targeted environment for the application deployment when focusing on the problem size scale up.
+
+\begin{figure}[ht]
\centering
\includegraphics[width=100mm]{pb_size_impact_on_execution_time.pdf}
-\caption{Problem size impacts on execution time}
+\caption{Problem size impacts on performances}
\label{fig:05}
\end{figure}
-In these experiments, the input matrix size has been set from $N_{x} = N_{y}
-= N_{z} = 40$ to $200$ side elements that is from $40^{3} = 64.000$ to $200^{3}
-= 8,000,000$ points. Obviously, as shown in Figure~\ref{fig:05}, the execution
-time for both algorithms increases when the input matrix size also increases.
-But the interesting results are:
-\begin{enumerate}
- \item the drastic increase ($10$ times) of the number of iterations needed to
- reach the convergence for the classical GMRES algorithm when the matrix size
- go beyond $N_{x}=150$; \RC{C'est toujours pas clair... ok le nommbre d'itérations est 10 fois plus long mais la suite de la phrase ne veut rien dire}
-\item the classical GMRES execution time is almost the double for $N_{x}=140$
- compared with the Krylov multisplitting method.
-\end{enumerate}
+\subsubsection{CPU power impacts on performances\\}
+Using the SimGrid simulator flexibility, we have tried to determine the impact of the CPU power of the processors in the different clusters on performances of both algorithms. We have varied the CPU power from $1$GFlops to $19$GFlops. The simulation is conducted in a grid of 2$\times$16 processors interconnected by the network $N2$ (see Table~\ref{tab:01}) to solve a 3D Poisson problem of size $150^3$. The results depicted in Figure~\ref{fig:06} confirm the performance gain, about $95\%$ for both algorithms, after improving the CPU power of processors.
-These findings may help a lot end users to setup the best and the optimal
-targeted environment for the application deployment when focusing on the problem
-size scale up. It should be noticed that the same test has been done with the
-grid 2x16 leading to the same conclusion.
-
-\subsubsection{CPU Power impacts on performance}
-
-\begin{table} [ht!]
-\centering
-\begin{tabular}{r c }
- \hline
- Grid architecture & 2x16\\ %\hline
- Network & N2 : bw=1Gbs - lat=5.10$^{-5}$ \\ %\hline
- Input matrix size & $N_{x} = 150 \times 150 \times 150$\\ \hline
- \end{tabular}
-\caption{Test conditions: CPU Power impacts}
-\label{tab:06}
-\end{table}
-
-\begin{figure} [ht!]
+\begin{figure}[ht]
\centering
\includegraphics[width=100mm]{cpu_power_impact_on_execution_time.pdf}
-\caption{CPU Power impacts on execution time}
+\caption{CPU Power impacts on performances}
\label{fig:06}
\end{figure}
-
-Using the Simgrid simulator flexibility, we have tried to determine the impact
-on the algorithms performance in varying the CPU power of the clusters nodes
-from $1$ to $19$ GFlops. The outputs depicted in Figure~\ref{fig:06} confirm the
-performance gain, around $95\%$ for both of the two methods, after adding more
-powerful CPU.
\ \\
-%\DL{il faut une conclusion sur ces tests : ils confirment les résultats déjà
-%obtenus en grandeur réelle. Donc c'est une aide précieuse pour les dev. Pas
-%besoin de déployer sur une archi réelle}
-
To conclude these series of experiments, with SimGrid we have been able to make
many simulations with many parameters variations. Doing all these experiments
with a real platform is most of the time not possible. Moreover the behavior of
-both GMRES and Krylov multisplitting methods is in accordance with larger real
-executions on large scale supercomputer~\cite{couturier15}.
+both GMRES and Krylov two-stage algorithms is in accordance with larger real
+executions on large scale supercomputers~\cite{couturier15}.
-\subsection{Comparing GMRES in native synchronous mode and the multisplitting algorithm in asynchronous mode}
+\subsection{Comparison between synchronous GMRES and asynchronous two-stage multisplitting algorithms}
The previous paragraphs put in evidence the interests to simulate the behavior
of the application before any deployment in a real environment. In this
theoretically reduce the overall execution time and can improve the algorithm
performance.
-\RC{la phrase suivante est bizarre, je ne comprends pas pourquoi elle vient ici}
-In this section, Simgrid simulator tool has been successfully used to show
-the efficiency of the multisplitting in asynchronous mode and to find the best
-combination of the grid resources (CPU, Network, input matrix size, \ldots ) to
-get the highest \textit{"relative gain"} (exec\_time$_{GMRES}$ /
-exec\_time$_{multisplitting}$) in comparison with the classical GMRES time.
-
-
-The test conditions are summarized in the table~\ref{tab:07}: \\
-
-\begin{table} [ht!]
+In this section, the SimGrid simulator is used to compare the behavior of the
+two-stage algorithm in asynchronous mode with GMRES in synchronous mode. Several
+benchmarks have been performed with various combinations of the grid resources
+(CPU, Network, matrix size, \ldots). The test conditions are summarized
+in Table~\ref{tab:02}. In order to compare the execution times, Table~\ref{tab:03}
+reports the relative gain between both algorithms. It is defined by the ratio
+between the execution time of GMRES and the execution time of the
+multisplitting.
+\LZK{Quelle table repporte les gains relatifs?? Sûrement pas Table II !!}
+\RCE{Table III avec la nouvelle numerotation}
+The ratio is greater than one because the asynchronous
+multisplitting version is faster than GMRES.
+
+\begin{table}[htbp]
\centering
-\begin{tabular}{r c }
+\begin{tabular}{ll}
\hline
- Grid Architecture & 2x50 totaling 100 processors\\ %\hline
- Processors Power & 1 GFlops to 1.5 GFlops\\
- Intra-Network & bw=1.25 Gbits - lat=5.10$^{-5}$ \\ %\hline
- Inter-Network & bw=5 Mbits - lat=2.10$^{-2}$\\
- Input matrix size & $N_{x}$ = From 62 to 150\\ %\hline
- Residual error precision & 10$^{-5}$ to 10$^{-9}$\\ \hline \\
+ Grid architecture & 2$\times$50 totaling 100 processors\\
+ Processors Power & 1 GFlops to 1.5 GFlops \\
+ \multirow{2}{*}{Network inter-clusters} & $bw$=1.25 Gbits, $lat=50\mu$s \\
+ & $bw$=5 Mbits, $lat=20ms$s\\
+ Matrix size & from $62^3$ to $150^3$\\
+ Residual error precision & $10^{-5}$ to $10^{-9}$\\ \hline \\
\end{tabular}
-\caption{Test conditions: GMRES in synchronous mode vs Krylov Multisplitting in asynchronous mode}
-\label{tab:07}
+\caption{Test conditions: GMRES in synchronous mode vs. Krylov two-stage in asynchronous mode}
+\label{tab:02}
\end{table}
-Again, comprehensive and extensive tests have been conducted with different
-parameters as the CPU power, the network parameters (bandwidth and latency)
-and with different problem size. The relative gains greater than $1$ between the
-two algorithms have been captured after each step of the test. In
-Table~\ref{tab:08} are reported the best grid configurations allowing
-the multisplitting method to be more than $2.5$ times faster than the
-classical GMRES. These experiments also show the relative tolerance of the
-multisplitting algorithm when using a low speed network as usually observed with
-geographically distant clusters through the internet.
% use the same column width for the following three tables
\newlength{\mytablew}\settowidth{\mytablew}{\footnotesize\np{E-11}}
power (GFlops)
& 1 & 1 & 1 & 1.5 & 1.5 & 1.5 & 1.5 & 1 & 1.5 & 1.5 \\
\hline
- size (N)
+ size ($N^3$)
& 62 & 62 & 62 & 100 & 100 & 110 & 120 & 130 & 140 & 150 \\
\hline
Precision
\hline
\end{mytable}
%\end{table}
- \caption{Relative gain of the multisplitting algorithm compared with the classical GMRES}
- \label{tab:08}
+ \caption{Relative gains of the two-stage multisplitting algorithm compared with the classical GMRES}
+ \label{tab:03}
\end{table}
+Again, comprehensive and extensive tests have been conducted with different
+parameters as the CPU power, the network parameters (bandwidth and latency)
+and with different problem size. The relative gains greater than $1$ between the
+two algorithms have been captured after each step of the test. In
+Table~\ref{tab:08} are reported the best grid configurations allowing
+the two-stage multisplitting algorithm to be more than $2.5$ times faster than the
+classical GMRES. These experiments also show the relative tolerance of the
+multisplitting algorithm when using a low speed network as usually observed with
+geographically distant clusters through the internet.
-\section{Conclusion}
+\section{Conclusion}
In this paper we have presented the simulation of the execution of three
-different parallel solvers on some multi-core architectures. We have show that
+different parallel solvers on some multi-core architectures. We have shown that
the SimGrid toolkit is an interesting simulation tool that has allowed us to
determine which method to choose given a specified multi-core architecture.
Moreover the simulated results are in accordance (i.e. with the same order of
In future works, we plan to investigate how to simulate the behavior of really
large scale applications. For example, if we are interested to simulate the
execution of the solvers of this paper with thousand or even dozens of thousands
-or core, it is not possible to do that with SimGrid. In fact, this tool will
+of cores, it is not possible to do that with SimGrid. In fact, this tool will
make the real computation. So we plan to focus our research on that problematic.
