1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
65 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
68 if ((NOT DEFINED enable_smpi) OR enable_smpi)
69 # First unset the compiler in case we're re-running cmake over a previous
70 # configuration where it was saved as smpiff
71 unset(CMAKE_Fortran_COMPILER)
75 enable_language(Fortran OPTIONAL)
78 if(CMAKE_Fortran_COMPILER)
79 # Fortran compiler detected: save it, then replace by smpiff
80 set(SAVED_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
81 set(CMAKE_Fortran_COMPILER smpiff)
83 endif(CMAKE_Fortran_COMPILER)
87 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
88 # Build the version number #
89 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
91 set(SIMGRID_VERSION_MAJOR "3")
92 set(SIMGRID_VERSION_MINOR "13")
93 set(SIMGRID_VERSION_PATCH "90")
94 set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1)
96 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
98 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
99 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
101 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
104 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
106 set(libsimgrid_version "${release_version}")
107 set(libsimgrid-java_version "${release_version}")
109 ### SET THE LIBRARY EXTENSION
119 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION)
120 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
122 ### Set the library providing dlopen
123 if("${CMAKE_SYSTEM}" MATCHES "Linux")
124 find_library(DL_LIBRARY dl)
125 endif("${CMAKE_SYSTEM}" MATCHES "Linux")
127 ### Find programs and paths
128 FIND_PROGRAM(GCOV_PATH gcov)
131 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
134 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
135 set(PythonInterp_FIND_VERSION 3)
136 set(PythonInterp_FIND_VERSION_COUNT 1)
137 set(PythonInterp_FIND_VERSION_MAJOR 3)
138 include(FindPythonInterp)
139 if(NOT PYTHONINTERP_FOUND)
140 message(FATAL_ERROR "Please install Python (version 3 or higher).")
144 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
145 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
147 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
149 ### Compute the include paths
151 ${CMAKE_HOME_DIRECTORY}
152 ${CMAKE_HOME_DIRECTORY}/include
153 ${CMAKE_HOME_DIRECTORY}/src/include
155 ${CMAKE_BINARY_DIR}/include
158 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
159 set(INCLUDES ${INCLUDES} /usr/include/)
163 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
164 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
165 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
166 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
167 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
168 unset(CMAKE_INCLUDE_WIN)
171 include_directories(${INCLUDES})
173 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
174 set(SIMGRID_DEP "-lm")
176 ### Determine the assembly flavor that we need today
177 set(HAVE_RAW_CONTEXTS 0)
178 include(CMakeDetermineSystem)
179 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
180 IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
181 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
182 set(PROCESSOR_i686 1)
183 set(PROCESSOR_x86_64 0)
185 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
186 set(PROCESSOR_i686 0)
187 set(PROCESSOR_x86_64 1)
190 message(STATUS "Disable fast raw contexts on Windows.")
192 set(HAVE_RAW_CONTEXTS 1)
195 set(PROCESSOR_i686 0)
196 set(PROCESSOR_x86_64 0)
199 include(CheckFunctionExists)
200 include(CheckTypeSize)
201 include(CheckIncludeFile)
202 include(CheckIncludeFiles)
203 include(CheckLibraryExists)
204 include(CheckSymbolExists)
207 include(FindGraphviz)
211 include(FindLuaSimgrid)
218 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
223 set(Boost_USE_STATIC_LIBS 1)
229 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
233 find_package(Boost 1.48)
235 include_directories(${Boost_INCLUDE_DIRS})
238 message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
240 message(FATAL_ERROR "Failed to find Boost libraries."
241 "Did you install libboost-dev and libboost-context-dev?"
242 "(libboost-context-dev is optional)"
243 "SimGrid requires Boost >= 1.48.0")
247 #Boost context 1.61 will break compatibility with our implementation.
248 #Warn users about that
249 find_package(Boost 1.61 COMPONENTS context)
251 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
252 message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
255 set(HAVE_BOOST_CONTEXTS 0)
257 # Try again to see if we have libboost-context
258 find_package(Boost 1.42 COMPONENTS context)
259 set(Boost_FOUND 1) # We don't care of whether this component is missing
261 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
262 # We should use feature detection for this instead:
263 if (Boost_VERSION LESS 105600)
264 message("Found Boost.Context API v1")
265 set(HAVE_BOOST_CONTEXTS 1)
267 message("Found Boost.Context API v2")
268 set(HAVE_BOOST_CONTEXTS 2)
271 message (" boost : found.")
272 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
273 set(HAVE_BOOST_CONTEXTS 0)
277 # Checks for header libraries functions.
278 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
280 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
281 if(NOT APPLE) # OS X El Capitan deprecates this function
282 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
284 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
285 set(HAVE_PTHREAD_SETAFFINITY 0)
286 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
288 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
289 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
291 # Use the GNU version of unusual modifiers like PRIx64
292 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
293 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
295 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
298 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
299 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
300 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
301 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
302 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
303 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
304 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
305 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
307 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
308 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
309 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
310 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
311 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
312 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
313 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
314 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
315 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
316 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
318 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
320 # The detection of vasprintf fails on MinGW, assumingly because it's
321 # defined as an inline function in stdio.h instead of a regular
322 # function. So force the result to be 1 despite of the test.
323 set(HAVE_VASPRINTF 1)
326 #Check if __thread is defined
328 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
329 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
330 RESULT_VARIABLE HAVE_thread_storage_run)
331 file(REMOVE testprog)
332 if(HAVE_thread_storage_run)
333 set(HAVE_THREAD_LOCAL_STORAGE 1)
335 set(HAVE_THREAD_LOCAL_STORAGE 0)
338 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux")
339 message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
340 set(enable_model-checking FALSE)
343 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
347 if(enable_model-checking)
348 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
350 SET(enable_model-checking 0)
359 if(enable_mallocators)
360 SET(HAVE_MALLOCATOR 1)
362 SET(HAVE_MALLOCATOR 0)
365 include(FindLibunwind)
368 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind")
370 # Apple forbids to link directly against its libunwind implementation
371 # So let's comply and link against the System framework
372 SET(SIMGRID_DEP "${SIMGRID_DEP} -lSystem")
374 if("${CMAKE_SYSTEM}" MATCHES "Linux")
375 set(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-ptrace")
376 # This supposes that the host machine is either an AMD or a X86.
377 # This is deeply wrong, and should be fixed by manually loading -lunwind-PLAT (FIXME)
379 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86_64")
381 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86")
385 if(enable_model-checking)
386 message(FATAL_ERROR "Please either install the libunwind7-dev package (or equivalent) or turn off the model-checking option of SimGrid.")
390 if(enable_model-checking)
394 SET(SIMGRID_DEP "${SIMGRID_DEP} -ldw")
400 if (enable_model-checking AND enable_ns3)
401 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
406 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
408 SET(HAVE_PRIVATIZATION 1)
410 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
411 SET(HAVE_PRIVATIZATION 0)
417 #--------------------------------------------------------------------------------------------------
418 ### Check for GNU dynamic linker
419 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
421 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
422 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
423 OUTPUT_VARIABLE HAVE_GNU_LD_compil
425 if(HAVE_GNU_LD_compil)
427 message(STATUS "Warning: test program toward GNU ld failed to compile:")
428 message(STATUS "${HAVE_GNU_LD_comp_output}")
430 execute_process(COMMAND ./test_gnu_ld
431 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
432 RESULT_VARIABLE HAVE_GNU_LD_run
433 OUTPUT_VARIABLE var_exec
436 if(NOT HAVE_GNU_LD_run)
438 message(STATUS "We are using GNU dynamic linker")
441 message(STATUS "Warning: error while checking for GNU ld:")
442 message(STATUS "Test output: '${var_exec}'")
443 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
445 file(REMOVE test_gnu_ld)
449 #--------------------------------------------------------------------------------------------------
450 ### Initialize of CONTEXT THREADS
452 set(HAVE_THREAD_CONTEXTS 0)
454 ### Test that we have a way to create semaphores
456 if(HAVE_SEM_OPEN_LIB)
457 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
458 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
459 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
462 # Test sem_open by compiling:
463 if(HAVE_SEM_OPEN_compil)
465 message(STATUS "Warning: sem_open not compilable")
466 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
469 message(STATUS "sem_open is compilable")
472 # If we're not crosscompiling, we check by executing the program:
473 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
474 execute_process(COMMAND ./sem_open
475 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
476 RESULT_VARIABLE HAVE_SEM_OPEN_run
477 OUTPUT_VARIABLE var_compil
479 if (NOT HAVE_SEM_OPEN_run)
481 message(STATUS "sem_open is executable")
484 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
485 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
487 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
489 message(STATUS "Warning: sem_open not executable")
490 message(STATUS "Compilation output: '${var_compil}'")
491 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
494 file(REMOVE sem_open)
499 if(HAVE_SEM_INIT_LIB)
500 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
501 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
502 RESULT_VARIABLE HAVE_SEM_INIT_run
503 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
505 # Test sem_init by compiling:
506 if(HAVE_SEM_INIT_compil)
508 message(STATUS "Warning: sem_init not compilable")
509 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
512 message(STATUS "sem_init is compilable")
515 # If we're not crosscompiling, we check by executing the program:
516 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
517 execute_process(COMMAND ./sem_init
518 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
519 RESULT_VARIABLE HAVE_SEM_INIT_run
520 OUTPUT_VARIABLE var_compil
522 if (NOT HAVE_SEM_INIT_run)
524 message(STATUS "sem_init is executable")
527 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
528 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
530 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
532 message(STATUS "Warning: sem_init not executable")
533 message(STATUS "Compilation output: '${var_compil}'")
534 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
537 file(REMOVE sem_init)
542 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
543 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
546 set(HAVE_THREAD_CONTEXTS 1)
547 message("-- Support for thread context factory ok.")
550 set(HAVE_UCONTEXT_CONTEXTS 0)
551 if(NOT HAVE_UCONTEXT_H)
552 message("-- No ucontext factory: <ucontext.h> not found.")
554 message("-- No ucontext factory: Apple don't want us to use them.")
555 set(HAVE_UCONTEXT_H 0)
557 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
558 OUTPUT_VARIABLE compile_makecontext_output)
560 #If can have both context
561 if(compile_makecontext)
562 set(HAVE_UCONTEXT_CONTEXTS 1)
563 message("-- Support for ucontext factory ok.")
565 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
566 message("-- No ucontext factory: makecontext() is not compilable.")
569 # Stack setup (size and address)
570 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
571 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
572 RUN_OUTPUT_VARIABLE stack_setup)
574 LIST(LENGTH stack_setup stack_setup_len)
575 if("${stack_setup_len}" STREQUAL "2")
576 LIST(GET stack_setup 0 makecontext_addr)
577 LIST(GET stack_setup 1 makecontext_size)
578 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
579 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
581 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
585 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
586 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
588 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
589 RUN_OUTPUT_VARIABLE stack
590 COPY_FILE test_stackgrowth)
592 if("${stack}" STREQUAL "down")
593 set(PTH_STACKGROWTH "-1")
594 elseif("${stack}" STREQUAL "up")
595 set(PTH_STACKGROWTH "1")
597 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
598 set(PTH_STACKGROWTH "-1")
599 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
600 set(PTH_STACKGROWTH "-1")
602 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
605 # If the test ran well, remove the test binary
606 file(REMOVE test_stackgrowth)
607 #--------------------------------------------------------------------------------------------------
609 ### check for addr2line
610 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
612 set(ADDR2LINE "${ADDR2LINE}/addr2line")
618 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
622 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
623 OUTPUT_VARIABLE remote
624 OUTPUT_STRIP_TRAILING_WHITESPACE)
625 #message(STATUS "Git remote: ${remote}")
626 execute_process(COMMAND git config --get remote.${remote}.url
627 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
629 OUTPUT_STRIP_TRAILING_WHITESPACE)
630 #message(STATUS "Git url: ${url}")
632 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
633 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
634 OUTPUT_VARIABLE GIT_VERSION
635 OUTPUT_STRIP_TRAILING_WHITESPACE)
636 message(STATUS "Git version: ${GIT_VERSION}")
638 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
639 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
640 OUTPUT_VARIABLE GIT_DATE
641 OUTPUT_STRIP_TRAILING_WHITESPACE)
642 message(STATUS "Git date: ${GIT_DATE}")
643 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
645 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
646 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
647 OUTPUT_VARIABLE SIMGRID_GITHASH
648 OUTPUT_STRIP_TRAILING_WHITESPACE)
650 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
651 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
654 ### Generate the required headers and scripts
655 #############################################
657 # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
658 # but this too error prone. If you forget to include the config.h, you get weird segfaults.
659 # If you include it everywhere, everything gets recompiled everytime.
660 # So we include only where needed, and compile with -Wundef to notice the missing includes.
661 # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
662 # So we have to make sure that everything got a decent value before generating the files.
663 foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN
664 HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF
665 HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF HAVE_MREMAP HAVE_DLFUNC)
673 # Avoid triggering a (full) rebuild by touching the files if they did not really change
674 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
675 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
676 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
677 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
678 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
679 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
681 # We need two versions of the SMPI scripts because they contain the path to the library
682 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
684 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
686 ### SMPI script used when simgrid is installed
687 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
688 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
689 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
690 set(libdir ${exec_prefix}/lib)
691 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
693 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
695 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
697 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
698 foreach(script cc cxx ff f90 run)
699 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
702 ### SMPI scripts used when compiling simgrid
703 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
704 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
705 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
706 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
707 set(libdir "${CMAKE_BINARY_DIR}/lib")
708 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
710 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
712 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
714 foreach(script cc cxx ff f90 run)
715 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
719 foreach(script cc cxx ff f90 run)
720 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
721 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
725 set(generated_headers_to_install
726 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
727 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
730 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
732 set(generated_files_to_clean
734 ${generated_headers_to_install}
735 ${CMAKE_BINARY_DIR}/bin/smpicc
736 ${CMAKE_BINARY_DIR}/bin/smpicxx
737 ${CMAKE_BINARY_DIR}/bin/smpiff
738 ${CMAKE_BINARY_DIR}/bin/smpif90
739 ${CMAKE_BINARY_DIR}/bin/smpirun
740 ${CMAKE_BINARY_DIR}/bin/colorize
741 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
742 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
745 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
746 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
747 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
748 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
749 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
751 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
754 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
785 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
786 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
787 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
788 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
789 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
790 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
791 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
792 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
793 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
794 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
796 set(generated_files_to_clean
797 ${generated_files_to_clean}
798 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
799 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
800 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
802 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
805 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
810 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
836 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
837 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
838 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
839 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
840 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
841 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
842 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
843 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
844 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
845 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
849 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
850 "${generated_files_to_clean}")
852 ### Define source packages for Libs
853 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
855 ### Build some Maintainer files
856 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
857 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
859 ### Setup gcc & clang flags
861 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
866 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
868 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
872 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
876 if(enable_memcheck_xml)
877 set(enable_memcheck true)
882 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
883 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
885 ### Define subdirectories
886 foreach(cmakefile ${CMAKEFILES_TXT})
887 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
888 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
891 ### Setup the distrib
892 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
894 ### Build the docs if asked to
895 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
897 ### Print the result of configuration
899 message("##########################################")
900 message("#### Content of src/internal_config.h ####")
901 message("##########################################")
902 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
903 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
904 foreach(line ${config_output})
907 message("##########################################")
908 message("#### Content of simgrid_config.h ####")
909 message("##########################################")
910 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
911 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
912 foreach(line ${config_output})
915 message("##########################################")
916 message("#### End of configuration headers ####")
917 message("##########################################")
919 message("\nConfiguration of package `simgrid':")
920 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
921 message(" Build Name ..................: ${BUILDNAME}")
922 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
923 message(" Site ........................: ${SITE}")
924 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
926 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
928 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
931 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
932 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
933 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
934 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
935 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
937 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
938 message(" version .............: ${Java_VERSION_STRING}")
940 message(" SWIG ................: Version ${SWIG_VERSION} found.")
942 message(" SWIG ................: Missing.")
945 if(CMAKE_Fortran_COMPILER)
946 message(" Compiler: Fortran ...........: ${SAVED_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
947 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
949 message(" Linker: .....................: ${CMAKE_LINKER}")
950 message(" version .............: ${LINKER_VERSION}")
951 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
953 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
954 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
955 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
956 message(" with LTO ....................: ${enable_lto}")
960 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
962 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
966 message(" Compile Java ................: yes")
967 message(" Native lib in jar .........: ${enable_lib_in_jar}")
969 message(" Compile Java ................: NO")
971 message(" Compile Lua .................: ${HAVE_LUA}")
972 message(" Compile Smpi ................: ${HAVE_SMPI}")
973 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
974 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
975 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
976 message(" PAPI support...............: ${HAVE_PAPI}")
977 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
979 message(" Maintainer mode .............: ${enable_maintainer_mode}")
980 message(" Documentation................: ${enable_documentation}")
981 message(" Model checking ..............: ${HAVE_MC}")
982 message(" Jedule mode ................: ${HAVE_JEDULE}")
983 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
984 message(" Mallocators .................: ${enable_mallocators}")
986 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
989 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
990 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
991 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")