1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
20 message("-- You are compiling SimGrid with MicroSoft Visual C. Good luck.")
22 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_SCL_SECURE_NO_WARNINGS")
23 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_SCL_SECURE_NO_WARNINGS")
25 INCLUDE(CheckCCompilerFlag)
26 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
28 ## Request full debugging flags
29 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
30 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
31 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
33 if (CMAKE_COMPILER_IS_GNUCC)
34 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
36 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
37 "You need a sufficient support of c++11 to compile SimGrid.")
41 ## We need a decent support of the c++11 standard
42 include(CheckCXXCompilerFlag)
43 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
44 if(COMPILER_SUPPORTS_CXX11)
45 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
48 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
49 "Please use a decent C++ compiler.")
52 ### And we need C11 standard, too
53 include(CheckCCompilerFlag)
54 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
55 if(COMPILER_SUPPORTS_C11)
56 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
59 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
60 "Please use a decent C compiler "
61 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
63 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
64 ### gcc 4.[1-5] cannot compile ucontext on OSX
65 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
66 set(HAVE_UCONTEXT_H 0)
71 if ((NOT DEFINED enable_smpi OR enable_smpi) AND NOT APPLE) # smpi is enabled by default
72 # Call enable_language(Fortran) in order to load the build rules for
73 # this language, needed by teshsuite/smpi/mpich-test/. Use
74 # CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working
75 # compiler (smpiff don't exist at configure time).
76 include(CMakeForceCompiler)
77 if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER)
78 MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id)
79 SET(CMAKE_Fortran_COMPILER "${compiler}")
80 SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
81 SET(CMAKE_Fortran_COMPILER_ID ${id})
82 SET(CMAKE_Fortran_COMPILER_WORKS TRUE)
83 SET(CMAKE_Fortran_COMPILER_FORCED TRUE)
85 # Set old compiler id variables.
86 IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
87 SET(CMAKE_COMPILER_IS_GNUG77 1)
88 ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
89 ENDMACRO(CMAKE_FORCE_Fortran_COMPILER)
91 CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff)
92 enable_language(Fortran OPTIONAL)
95 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
96 # Build the version number #
97 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
99 set(SIMGRID_VERSION_MAJOR "3")
100 set(SIMGRID_VERSION_MINOR "13")
101 set(SIMGRID_VERSION_PATCH "0")
102 set(SIMGRID_VERSION_EXTRA "-devel") # Extra words to add to version string (e.g. -rc1)
104 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
106 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
107 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
109 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
112 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
114 set(libsimgrid_version "${release_version}")
115 set(libsimgrid-java_version "${release_version}")
117 ### SET THE LIBRARY EXTENSION
129 execute_process(COMMAND ${CMAKE_LINKER} --version
130 OUTPUT_VARIABLE LINKER_VERSION)
131 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
133 ### Find programs and paths
134 FIND_PROGRAM(GCOV_PATH gcov)
137 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
141 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
142 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
144 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
146 ### Compute the include paths
148 ${CMAKE_HOME_DIRECTORY}
149 ${CMAKE_HOME_DIRECTORY}/include
150 ${CMAKE_HOME_DIRECTORY}/src/include
152 ${CMAKE_BINARY_DIR}/include
155 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
156 set(INCLUDES ${INCLUDES} /usr/include/)
159 ### Check 32bits or 64bits
160 IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
168 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
169 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
170 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
171 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
172 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
173 unset(CMAKE_INCLUDE_WIN)
177 include_directories(${INCLUDES})
180 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
182 ### Determine the assembly flavor that we need today
183 set(HAVE_RAW_CONTEXTS 0)
184 include(CMakeDetermineSystem)
185 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
187 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
188 set(PROCESSOR_i686 1)
189 set(PROCESSOR_x86_64 0)
191 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
192 set(PROCESSOR_i686 0)
193 set(PROCESSOR_x86_64 1)
196 message(STATUS "Disable fast raw contexts on Windows.")
198 set(HAVE_RAW_CONTEXTS 1)
201 set(PROCESSOR_i686 0)
202 set(PROCESSOR_x86_64 0)
205 include(CheckFunctionExists)
206 include(CheckTypeSize)
207 include(CheckIncludeFile)
208 include(CheckIncludeFiles)
209 include(CheckLibraryExists)
210 include(CheckSymbolExists)
213 include(FindGraphviz)
214 include(FindLibSigc++)
218 include(FindLuaSimgrid)
225 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
230 set(Boost_USE_STATIC_LIBS 1)
233 find_package(Boost 1.48)
235 include_directories(${Boost_INCLUDE_DIRS})
238 message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
240 message(FATAL_ERROR "Failed to find Boost libraries."
241 "Did you install libboost-dev and libboost-context-dev?"
242 "(libboost-context-dev is optional)"
243 "SimGrid requires Boost >= 1.48.0")
247 # Try again to see if we have libboost-context
248 find_package(Boost 1.42 COMPONENTS context)
249 set(Boost_FOUND 1) # We don't care of whether this component is missing
251 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
252 # We should use feature detection for this instead:
253 if (Boost_VERSION LESS 105600)
254 message("Found Boost.Context API v1")
255 set(HAVE_BOOST_CONTEXTS 1)
257 message("Found Boost.Context API v2")
258 set(HAVE_BOOST_CONTEXTS 2)
261 message (" boost : found.")
262 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
263 set(HAVE_BOOST_CONTEXTS 0)
266 # Try again to see if we have libboost-context
267 find_package(Boost 1.42 COMPONENTS context)
268 set(Boost_FOUND 1) # We don't care of whether this component is missing
270 if(Boost_FOUND AND Boost_GRAPH_FOUND)
271 set(HAVE_BOOST_GRAPH 1)
273 message (" boost : found.")
274 message (" boost-graph : missing. Install libboost-graph-dev for this optional feature.")
275 set(HAVE_BOOST_GRAPH 0)
278 # Checks for header libraries functions.
279 CHECK_LIBRARY_EXISTS(execinfo backtrace "" HAVE_BACKTRACE_IN_LIBEXECINFO)
280 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
282 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
283 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
284 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
285 set(HAVE_PTHREAD_SETAFFINITY 0)
286 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
288 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
289 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
291 # Use the GNU version of unusual modifiers like PRIx64
292 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
293 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
295 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
298 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
299 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
300 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
301 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
302 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
303 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
304 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
305 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
307 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
308 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
309 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
310 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
311 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
312 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
313 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
315 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
317 # The detection of vasprintf fails on MinGW, assumingly because it's
318 # defined as an inline function in stdio.h instead of a regular
319 # function. So force the result to be 1 despite of the test.
320 set(HAVE_VASPRINTF 1)
323 #Check if __thread is defined
325 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
326 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
327 RESULT_VARIABLE HAVE_thread_storage_run)
328 file(REMOVE testprog)
329 if(HAVE_thread_storage_run)
330 set(HAVE_THREAD_LOCAL_STORAGE 1)
332 set(HAVE_THREAD_LOCAL_STORAGE 0)
335 # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
337 NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND
338 NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND
339 NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND
340 NOT "${CMAKE_SYSTEM}" MATCHES "Darwin")
342 message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
345 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
357 if(enable_mallocators)
358 SET(HAVE_MALLOCATOR 1)
360 SET(HAVE_MALLOCATOR 0)
363 if(enable_model-checking AND HAVE_MMALLOC)
365 include(FindLibunwind)
368 if(enable_model-checking)
369 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
376 include(FindGFortran)
378 if("${CMAKE_SYSTEM}" MATCHES "Linux")
380 SET(HAVE_PRIVATIZATION 1)
381 elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD")
383 SET(HAVE_PRIVATIZATION 0)
385 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
386 SET(HAVE_PRIVATIZATION 0)
392 #--------------------------------------------------------------------------------------------------
393 ### Check for GNU dynamic linker
394 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
396 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld
397 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
398 OUTPUT_VARIABLE HAVE_GNU_LD_compil
400 if(HAVE_GNU_LD_compil)
402 message(STATUS "Warning: test program toward GNU ld failed to compile:")
403 message(STATUS "${HAVE_GNU_LD_comp_output}")
406 execute_process(COMMAND ./test_gnu_ld
407 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
408 RESULT_VARIABLE HAVE_GNU_LD_run
409 OUTPUT_VARIABLE var_exec
412 if(NOT HAVE_GNU_LD_run)
414 message(STATUS "We are using GNU dynamic linker")
417 message(STATUS "Warning: error while checking for GNU ld:")
418 message(STATUS "Test output: '${var_exec}'")
419 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
421 file(REMOVE test_gnu_ld)
426 #--------------------------------------------------------------------------------------------------
427 ### Initialize of CONTEXT THREADS
429 set(HAVE_THREAD_CONTEXTS 0)
432 ### Test that we have a way to create semaphores
434 if(HAVE_SEM_OPEN_LIB)
435 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
436 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
437 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
440 # Test sem_open by compiling:
441 if(HAVE_SEM_OPEN_compil)
443 message(STATUS "Warning: sem_open not compilable")
444 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
447 message(STATUS "sem_open is compilable")
450 # If we're not crosscompiling, we check by executing the program:
451 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
452 execute_process(COMMAND ./sem_open
453 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
454 RESULT_VARIABLE HAVE_SEM_OPEN_run
455 OUTPUT_VARIABLE var_compil
457 if (NOT HAVE_SEM_OPEN_run)
459 message(STATUS "sem_open is executable")
462 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
463 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
465 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
467 message(STATUS "Warning: sem_open not executable")
468 message(STATUS "Compilation output: '${var_compil}'")
469 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
472 file(REMOVE sem_open)
478 if(HAVE_SEM_INIT_LIB)
479 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
480 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
481 RESULT_VARIABLE HAVE_SEM_INIT_run
482 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
484 # Test sem_init by compiling:
485 if(HAVE_SEM_INIT_compil)
487 message(STATUS "Warning: sem_init not compilable")
488 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
491 message(STATUS "sem_init is compilable")
494 # If we're not crosscompiling, we check by executing the program:
495 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
496 execute_process(COMMAND ./sem_init
497 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
498 RESULT_VARIABLE HAVE_SEM_INIT_run
499 OUTPUT_VARIABLE var_compil
501 if (NOT HAVE_SEM_INIT_run)
503 message(STATUS "sem_init is executable")
506 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
507 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
509 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
511 message(STATUS "Warning: sem_init not executable")
512 message(STATUS "Compilation output: '${var_compil}'")
513 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
516 file(REMOVE sem_init)
519 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
520 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
523 set(HAVE_THREAD_CONTEXTS 1)
524 message("-- Support for thread context factory ok.")
528 set(HAVE_UCONTEXT_CONTEXTS 0)
529 if(NOT HAVE_UCONTEXT_H)
530 message("-- No ucontext factory: <ucontext.h> not found.")
532 message("-- No ucontext factory: Apple don't want us to use them.")
533 set(HAVE_UCONTEXT_H 0)
535 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
536 OUTPUT_VARIABLE compile_makecontext_output)
538 #If can have both context
539 if(compile_makecontext)
540 set(HAVE_UCONTEXT_CONTEXTS 1)
541 message("-- Support for ucontext factory ok.")
543 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
544 message("-- No ucontext factory: makecontext() is not compilable.")
547 # Stack setup (size and address)
548 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
549 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
550 RUN_OUTPUT_VARIABLE stack_setup)
552 LIST(LENGTH stack_setup stack_setup_len)
553 if("${stack_setup_len}" STREQUAL "2")
554 LIST(GET stack_setup 0 makecontext_addr)
555 LIST(GET stack_setup 1 makecontext_size)
556 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
557 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
559 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
563 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
564 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
566 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
567 RUN_OUTPUT_VARIABLE stack
568 COPY_FILE test_stackgrowth)
570 if("${stack}" STREQUAL "down")
571 set(PTH_STACKGROWTH "-1")
572 elseif("${stack}" STREQUAL "up")
573 set(PTH_STACKGROWTH "1")
575 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
576 set(PTH_STACKGROWTH "-1")
577 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
578 set(PTH_STACKGROWTH "-1")
580 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
583 # If the test ran well, remove the test binary
584 file(REMOVE test_stackgrowth)
585 #--------------------------------------------------------------------------------------------------
587 ### check for addr2line
588 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
590 set(ADDR2LINE "${ADDR2LINE}/addr2line")
596 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
600 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
601 OUTPUT_VARIABLE remote
602 OUTPUT_STRIP_TRAILING_WHITESPACE)
603 #message(STATUS "Git remote: ${remote}")
604 execute_process(COMMAND git config --get remote.${remote}.url
605 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
607 OUTPUT_STRIP_TRAILING_WHITESPACE)
608 #message(STATUS "Git url: ${url}")
610 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
611 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
612 OUTPUT_VARIABLE GIT_VERSION
613 OUTPUT_STRIP_TRAILING_WHITESPACE)
614 message(STATUS "Git version: ${GIT_VERSION}")
616 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
617 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
618 OUTPUT_VARIABLE GIT_DATE
619 OUTPUT_STRIP_TRAILING_WHITESPACE)
620 message(STATUS "Git date: ${GIT_DATE}")
621 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
623 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
624 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
625 OUTPUT_VARIABLE SIMGRID_GITHASH
626 OUTPUT_STRIP_TRAILING_WHITESPACE)
628 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
629 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
633 ### Generate the required headers and scripts
634 #############################################
636 # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
637 # but this too error prone. If you forget to include the config.h, you get weird segfaults.
638 # If you include it everywhere, everything gets recompiled everytime.
639 # So we include only where needed, and compile with -Wundef to notice the missing includes.
640 # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
641 # So we have to make sure that everything got a decent value before generating the files.
642 foreach(var HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP
643 HAVE_NANOSLEEP HAVE_POPEN HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H
644 HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF HAVE_UCONTEXT_H HAVE_UNISTD_H
645 HAVE_VALGRIND_H HAVE_VASPRINTF)
653 # Avoid triggering a (full) rebuild by touching the files if they did not really change
654 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
655 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
656 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
657 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
658 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
659 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
661 # We need two versions of the SMPI scripts because they contain the path to the library
662 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
664 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
666 ### SMPI script used when simgrid is installed
667 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
668 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
669 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
670 set(libdir ${exec_prefix}/lib)
671 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
673 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
675 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
677 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
678 foreach(script cc cxx ff f90 run)
679 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
682 ### SMPI scripts used when compiling simgrid
683 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
684 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
685 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
686 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
687 set(libdir "${CMAKE_BINARY_DIR}/lib")
688 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
690 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
692 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
694 foreach(script cc cxx ff f90 run)
695 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
699 foreach(script cc cxx ff f90 run)
700 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
701 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
705 set(generated_headers_to_install
706 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
707 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
710 set(generated_headers
711 ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h
714 set(generated_files_to_clean
716 ${generated_headers_to_install}
717 ${CMAKE_BINARY_DIR}/bin/smpicc
718 ${CMAKE_BINARY_DIR}/bin/smpicxx
719 ${CMAKE_BINARY_DIR}/bin/smpiff
720 ${CMAKE_BINARY_DIR}/bin/smpif90
721 ${CMAKE_BINARY_DIR}/bin/smpirun
722 ${CMAKE_BINARY_DIR}/bin/colorize
723 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
724 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
727 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
728 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
729 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
730 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
731 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
732 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
733 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
734 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
735 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
736 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
737 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
738 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
739 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
740 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
742 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
743 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
744 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
745 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
746 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
747 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
748 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
749 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
751 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
754 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
778 set(generated_files_to_clean
779 ${generated_files_to_clean}
780 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
781 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
782 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
783 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
784 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
785 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
786 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
787 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
788 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
789 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
790 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
791 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
792 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
793 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
794 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
795 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
796 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
797 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
798 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
799 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
800 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
802 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
805 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
831 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
832 "${generated_files_to_clean}")
834 ### Define source packages for Libs
835 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
837 ### Build some Maintainer files
838 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
839 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
841 ### Setup gcc & clang flags
843 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
848 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
850 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
854 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
858 if(enable_memcheck_xml)
859 set(enable_memcheck true)
864 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
865 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
867 ### Define subdirectories
868 foreach(cmakefile ${CMAKEFILES_TXT})
869 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
870 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
873 ### Setup the distrib
874 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
876 ### Build the doc (Windows downloads the doc instead of regenerating)
879 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
881 find_program(WGET_PROGRAM NAMES wget)
882 message(STATUS "wget: ${WGET_PROGRAM}")
884 ADD_CUSTOM_TARGET(documentation
885 COMMENT "Downloading the SimGrid documentation..."
886 COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/
887 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html
892 ### Print the result of configuration
894 message("##########################################")
895 message("#### Content of src/internal_config.h ####")
896 message("##########################################")
897 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
898 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
899 foreach(line ${config_output})
902 message("##########################################")
903 message("#### Content of simgrid_config.h ####")
904 message("##########################################")
905 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
906 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
907 foreach(line ${config_output})
910 message("##########################################")
911 message("#### End of configuration headers ####")
912 message("##########################################")
914 message("\nConfiguration of package `simgrid':")
915 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
916 message(" Build Name ..................: ${BUILDNAME}")
917 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
918 message(" Site ........................: ${SITE}")
919 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
921 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
923 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
926 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
927 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
928 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
929 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
930 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
932 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
933 message(" version .............: ${Java_VERSION_STRING}")
935 message(" SWIG ................: Version ${SWIG_VERSION} found.")
937 message(" SWIG ................: Missing.")
940 if(CMAKE_Fortran_COMPILER)
941 message(" Compiler: Fortran ...........: ${CMAKE_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
942 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
944 message(" Linker: .....................: ${CMAKE_LINKER}")
945 message(" version .............: ${LINKER_VERSION}")
946 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
948 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
949 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
950 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
951 message(" with LTO ....................: ${enable_lto}")
955 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
957 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
961 message(" Compile Java ................: yes")
962 message(" Native lib in jar .........: ${enable_lib_in_jar}")
964 message(" Compile Java ................: NO")
966 message(" Compile Lua .................: ${HAVE_LUA}")
967 message(" Compile Smpi ................: ${HAVE_SMPI}")
968 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
969 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
970 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
971 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
973 message(" Maintainer mode .............: ${enable_maintainer_mode}")
974 message(" Documentation................: ${enable_documentation}")
975 message(" Model checking ..............: ${HAVE_MC}")
976 message(" Jedule mode ................: ${HAVE_JEDULE}")
977 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
978 message(" Sigc++ mode .................: ${SIMGRID_HAVE_LIBSIG}")
979 message(" Mallocators .................: ${enable_mallocators}")
981 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
984 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
985 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
986 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")