1 .. S4U (Simgrid for you) is the modern interface of SimGrid, which new project should use.
3 .. This file follows the ReStructured syntax to be included in the
4 .. documentation, but it should remain readable directly.
10 SimGrid comes with an extensive set of examples, documented on this
11 page. Most of them only demonstrate one single feature, with some
12 larger examplars listed below.
14 The C++ examples can be found under examples/s4u while python examples
15 are in examples/python. Each such directory contains the source code (also listed
16 from this page), and the so-called tesh file containing how to call
17 the binary obtained by compiling this example and also the expected
18 output. Tesh files are used to turn each of our examples into an
19 integration test. Some examples also contain other files, on need.
21 A good way to bootstrap your own project is to copy and combine some
22 of the provided examples to constitute the skeleton of what you plan
27 ===========================
28 Actors: the Active Entities
29 ===========================
31 Starting and Stopping Actors
32 ----------------------------
34 - **Creating actors:**
35 Most actors are started from the deployment XML file, because this
36 is a :ref:`better scientific habit <howto_science>`, but you can
37 also create them directly from your code.
41 .. example-tab:: examples/s4u/actor-create/s4u-actor-create.cpp
43 You create actors either:
45 - Directly with :cpp:func:`simgrid::s4u::Actor::create`
46 - From XML with :cpp:func:`simgrid::s4u::Engine::register_actor` (if your actor is a class)
47 or :cpp:func:`simgrid::s4u::Engine::register_function` (if your actor is a function)
48 and then :cpp:func:`simgrid::s4u::Engine::load_deployment`
50 .. example-tab:: examples/python/actor-create/actor-create.py
52 You create actors either:
54 - Directly with :py:func:`simgrid.Actor.create()`
55 - From XML with :py:func:`simgrid.Engine.register_actor()` and then :py:func:`simgrid.Engine.load_deployment()`
57 .. example-tab:: examples/c/actor-create/actor-create.c
59 You create actors either:
61 - Directly with :cpp:func:`sg_actor_create()` followed by :cpp:func:`sg_actor_start`.
62 - From XML with :cpp:func:`simgrid_register_function` and then :cpp:func:`simgrid_load_deployment`.
64 .. example-tab:: examples/python/actor-create/actor-create_d.xml
66 The following file is used in both C++ and Python.
68 - **React to the end of actors:** You can attach callbacks to the end of
69 actors. There is several ways of doing so, depending on whether you want to
70 attach your callback to a given actor and on how you define the end of a
71 given actor. User code probably want to react to the termination of an actor
72 while some plugins want to react to the destruction (memory collection) of
77 .. example-tab:: examples/s4u/actor-exiting/s4u-actor-exiting.cpp
79 This example shows how to attach a callback to:
81 - the end of a specific actor: :cpp:func:`simgrid::s4u::this_actor::on_exit()`
82 - the end of any actor: :cpp:member:`simgrid::s4u::Actor::on_termination()`
83 - the destruction of any actor: :cpp:member:`simgrid::s4u::Actor::on_destruction()`
85 .. example-tab:: examples/c/actor-exiting/actor-exiting.c
87 This example shows how to attach a callback to the end of a specific actor with
88 :cpp:func:`sg_actor_on_exit()`.
91 Actors can forcefully stop other actors.
95 .. example-tab:: examples/s4u/actor-kill/s4u-actor-kill.cpp
97 See also :cpp:func:`void simgrid::s4u::Actor::kill(void)`, :cpp:func:`void simgrid::s4u::Actor::kill_all()`,
98 :cpp:func:`simgrid::s4u::this_actor::exit`, :cpp:func:`simgrid::s4u::this_actor::on_exit`.
100 .. example-tab:: examples/python/actor-kill/actor-kill.py
102 See also :py:func:`simgrid.Actor.kill`, :py:func:`simgrid.Actor.kill_all`, :py:func:`simgrid.this_actor.exit`,
103 :py:func:`simgrid.this_actor.on_exit`.
105 .. example-tab:: examples/c/actor-kill/actor-kill.c
107 See also :cpp:func:`sg_actor_kill`, :cpp:func:`sg_actor_kill_all`, :cpp:func:`sg_actor_exit`, :cpp:func:`sg_actor_on_exit`.
109 - **Controlling the actor life cycle from the XML:**
110 You can specify a start time and a kill time in the deployment file.
114 .. example-tab:: examples/s4u/actor-lifetime/s4u-actor-lifetime.cpp
116 This file is not really interesting: the important matter is in the XML file.
118 .. example-tab:: examples/s4u/actor-lifetime/s4u-actor-lifetime_d.xml
120 This demonstrates the ``start_time`` and ``kill_time`` attribute of the :ref:`pf_tag_actor` tag.
122 .. example-tab:: examples/python/actor-lifetime/actor-lifetime.py
124 This file is not really interesting: the important matter is in the XML file.
126 .. example-tab:: examples/c/actor-lifetime/actor-lifetime.c
128 This file is not really interesting: the important matter is in the XML file.
130 - **Daemonize actors:**
131 Some actors may be intended to simulate daemons that run in background. This example show how to transform a regular
132 actor into a daemon that will be automatically killed once the simulation is over.
136 .. example-tab:: examples/s4u/actor-daemon/s4u-actor-daemon.cpp
138 See also :cpp:func:`simgrid::s4u::Actor::daemonize()` and :cpp:func:`simgrid::s4u::Actor::is_daemon()`.
140 .. example-tab:: examples/python/actor-daemon/actor-daemon.py
142 See also :py:func:`simgrid.Actor.daemonize()` and :py:func:`simgrid.Actor.is_daemon()`.
144 .. example-tab:: examples/c/actor-daemon/actor-daemon.c
146 See also :cpp:func:`sg_actor_daemonize` and :cpp:func:`sg_actor_is_daemon`.
148 - **Specify the stack size to use**
149 The stack size can be specified by default on the command line,
150 globally by changing the configuration with :cpp:func:`simgrid::s4u::Engine::set_config`,
151 or for a specific actor using :cpp:func:`simgrid::s4u::Actor::set_stacksize` before its start.
155 .. example-tab:: examples/s4u/actor-stacksize/s4u-actor-stacksize.cpp
157 .. example-tab:: examples/c/actor-stacksize/actor-stacksize.c
159 Inter-Actors Interactions
160 -------------------------
162 See also the examples on :ref:`inter-actors communications
163 <s4u_ex_communication>` and the ones on :ref:`classical
164 synchronization objects <s4u_ex_IPC>`.
166 - **Suspend and Resume actors:**
167 Actors can be suspended and resumed during their executions.
171 .. example-tab:: examples/s4u/actor-suspend/s4u-actor-suspend.cpp
173 See also :cpp:func:`simgrid::s4u::this_actor::suspend()`,
174 :cpp:func:`simgrid::s4u::Actor::suspend()`, :cpp:func:`simgrid::s4u::Actor::resume()`, and
175 :cpp:func:`simgrid::s4u::Actor::is_suspended()`.
177 .. example-tab:: examples/python/actor-suspend/actor-suspend.py
179 See also :py:func:`simgrid.this_actor.suspend()`,
180 :py:func:`simgrid.Actor.suspend()`, :py:func:`simgrid.Actor.resume()`, and
181 :py:func:`simgrid.Actor.is_suspended()`.
183 .. example-tab:: examples/c/actor-suspend/actor-suspend.c
185 See also :cpp:func:`sg_actor_suspend()`, :cpp:func:`sg_actor_resume()`, and
186 :cpp:func:`sg_actor_is_suspended()`.
188 - **Migrating Actors:**
189 Actors can move or be moved from a host to another very easily. It amount to setting them on a new host.
193 .. example-tab:: examples/s4u/actor-migrate/s4u-actor-migrate.cpp
195 See also :cpp:func:`simgrid::s4u::this_actor::set_host()` and :cpp:func:`simgrid::s4u::Actor::set_host()`.
197 .. example-tab:: examples/python/actor-migrate/actor-migrate.py
199 See also :py:func:`simgrid.this_actor.set_host()` and :py:func:`simgrid.Actor.set_host()`.
201 .. example-tab:: examples/c/actor-migrate/actor-migrate.c
203 See also :cpp:func:`sg_actor_set_host()`.
205 - **Waiting for the termination of an actor:** (joining on it)
206 You can block the current actor until the end of another actor.
210 .. example-tab:: examples/s4u/actor-join/s4u-actor-join.cpp
212 See also :cpp:func:`simgrid::s4u::Actor::join()`.
214 .. example-tab:: examples/python/actor-join/actor-join.py
216 See also :py:func:`simgrid.Actor.join()`.
218 .. example-tab:: examples/c/actor-join/actor-join.c
220 See also :cpp:func:`sg_actor_join`.
222 - **Yielding to other actors**.
223 The ```yield()``` function interrupts the execution of the current
224 actor, leaving a chance to the other actors that are ready to run
229 .. example-tab:: examples/s4u/actor-yield/s4u-actor-yield.cpp
231 See also :cpp:func:`simgrid::s4u::this_actor::yield()`.
233 .. example-tab:: examples/python/actor-yield/actor-yield.py
235 See also :py:func:`simgrid.this_actor.yield_()`.
237 .. example-tab:: examples/c/actor-yield/actor-yield.c
239 See also :cpp:func:`sg_actor_yield()`.
241 Traces Replay as a Workload
242 ---------------------------
244 This section details how to run trace-driven simulations. It is very
245 handy when you want to test an algorithm or protocol that only react
246 to external events. For example, many P2P protocols react to user
247 requests, but do nothing if there is no such event.
249 In such situations, you should write your protocol in C++, and separate
250 the workload that you want to play onto your protocol in a separate
251 text file. Declare a function handling each type of the events in your
252 trace, register them using :cpp:func:`xbt_replay_action_register()` in
253 your main, and then run the simulation.
255 Then, you can either have one trace file containing all your events,
256 or a file per simulated process: the former may be easier to work
257 with, but the second is more efficient on very large traces. Check
258 also the tesh files in the example directories for details.
260 - **Communication replay:**
261 Presents a set of event handlers reproducing classical communication
262 primitives (asynchronous send/receive at the moment).
266 .. example-tab:: examples/s4u/replay-comm/s4u-replay-comm.cpp
269 Presents a set of event handlers reproducing classical I/O
270 primitives (open, read, close).
274 .. example-tab:: examples/s4u/replay-io/s4u-replay-io.cpp
276 ==========================
277 Activities: what Actors do
278 ==========================
280 .. _s4u_ex_communication:
282 Communications on the Network
283 -----------------------------
285 - **Basic asynchronous communications:**
286 Illustrates how to have non-blocking communications, that are
287 communications running in the background leaving the process free
288 to do something else during their completion.
292 .. example-tab:: examples/s4u/comm-wait/s4u-comm-wait.cpp
294 See also :cpp:func:`simgrid::s4u::Mailbox::put_async()` and :cpp:func:`simgrid::s4u::Comm::wait()`.
296 .. example-tab:: examples/python/comm-wait/comm-wait.py
298 See also :py:func:`simgrid.Mailbox.put_async()` and :py:func:`simgrid.Comm.wait()`.
300 .. example-tab:: examples/c/comm-wait/comm-wait.c
302 See also :cpp:func:`sg_mailbox_put_async()` and :cpp:func:`sg_comm__wait()`.
304 - **Suspending communications:**
305 The ``suspend()`` and ``resume()`` functions allow to block the
306 progression of a given communication for a while and then unblock it.
307 ``is_suspended()`` can be used to retrieve whether the activity is
308 currently blocked or not.
312 .. example-tab:: examples/s4u/comm-suspend/s4u-comm-suspend.cpp
314 See also :cpp:func:`simgrid::s4u::Activity::suspend()`
315 :cpp:func:`simgrid::s4u::Activity::resume()` and
316 :cpp:func:`simgrid::s4u::Activity::is_suspended()`.
319 - **Waiting for all communications in a set:**
320 The ``wait_all()`` function is useful when you want to block until
321 all activities in a given set have completed.
325 .. example-tab:: examples/s4u/comm-waitall/s4u-comm-waitall.cpp
327 See also :cpp:func:`simgrid::s4u::Comm::wait_all()`.
329 .. example-tab:: examples/python/comm-waitall/comm-waitall.py
331 See also :py:func:`simgrid.Comm.wait_all()`.
333 .. example-tab:: examples/c/comm-waitall/comm-waitall.c
335 See also :cpp:func:`sg_comm_wait_all()`.
337 - **Waiting for the first completed communication in a set:**
338 The ``wait_any()`` function is useful
339 when you want to block until one activity of the set completes, no
340 matter which terminates first.
344 .. example-tab:: examples/s4u/comm-waitany/s4u-comm-waitany.cpp
346 See also :cpp:func:`simgrid::s4u::Comm::wait_any()`.
348 .. example-tab:: examples/python/comm-waitany/comm-waitany.py
350 See also :py:func:`simgrid.Comm.wait_any()`.
352 .. example-tab:: examples/c/comm-waitany/comm-waitany.c
354 See also :cpp:func:`sg_comm_wait_any`.
356 .. _s4u_ex_execution:
358 Executions on the CPU
359 ---------------------
361 - **Basic execution:**
362 The computations done in your program are not reported to the
363 simulated world, unless you explicitly request the simulator to pause
364 the actor until a given amount of flops gets computed on its simulated
365 host. Some executions can be given an higher priority so that they
370 .. example-tab:: examples/s4u/exec-basic/s4u-exec-basic.cpp
372 See also :cpp:func:`void simgrid::s4u::this_actor::execute(double)`
373 and :cpp:func:`void simgrid::s4u::this_actor::execute(double, double)`.
375 .. example-tab:: examples/python/exec-basic/exec-basic.py
377 See also :py:func:`simgrid.this_actor.execute()`.
379 .. example-tab:: examples/c/exec-basic/exec-basic.c
381 See also :cpp:func:`void sg_actor_execute(double)`
382 and :cpp:func:`void sg_actor_execute_with_priority(double, double)`.
384 - **Asynchronous execution:**
385 You can start asynchronous executions, just like you would fire
390 .. example-tab:: examples/s4u/exec-async/s4u-exec-async.cpp
392 See also :cpp:func:`simgrid::s4u::this_actor::exec_init()`,
393 :cpp:func:`simgrid::s4u::Activity::start()`,
394 :cpp:func:`simgrid::s4u::Activity::wait()`,
395 :cpp:func:`simgrid::s4u::Activity::get_remaining()`,
396 :cpp:func:`simgrid::s4u::Exec::get_remaining_ratio()`,
397 :cpp:func:`simgrid::s4u::this_actor::exec_async()` and
398 :cpp:func:`simgrid::s4u::Activity::cancel()`.
400 .. example-tab:: examples/python/exec-async/exec-async.py
402 See also :py:func:`simgrid.this_actor::exec_init()`,
403 :py:func:`simgrid.Activity::start()`,
404 :py:func:`simgrid.Activity.wait()`,
405 :py:func:`simgrid.Activity.get_remaining()`,
406 :py:func:`simgrid.Exec.get_remaining_ratio()`,
407 :py:func:`simgrid.this_actor.exec_async()` and
408 :py:func:`simgrid.Activity.cancel()`.
410 .. example-tab:: examples/c/exec-async/exec-async.c
412 See also :cpp:func:`sg_actor_exec_init()`,
413 :cpp:func:`sg_exec_start()`,
414 :cpp:func:`sg_exec_wait()`,
415 :cpp:func:`sg_exec_get_remaining()`,
416 :cpp:func:`sg_exec_get_remaining_ratio()`,
417 :cpp:func:`sg_actor_exec_async()` and
418 :cpp:func:`sg_exec_cancel()`,
420 - **Remote execution:**
421 You can start executions on remote hosts, or even change the host
422 on which they occur during their execution.
426 .. example-tab:: examples/s4u/exec-remote/s4u-exec-remote.cpp
428 See also :cpp:func:`simgrid::s4u::Exec::set_host()`.
430 .. example-tab:: examples/python/exec-remote/exec-remote.py
432 See also :py:func:`simgrid.Exec.set_host()`.
434 .. example-tab:: examples/c/exec-remote/exec-remote.c
436 See also :cpp:func:`sg_exec_set_host()`.
438 - **Parallel executions:**
439 These objects are convenient abstractions of parallel
440 computational kernels that span over several machines, such as a
441 PDGEM and the other ScaLAPACK routines. Note that this only works
442 with the "ptask_L07" host model (``--cfg=host/model:ptask_L07``).
446 .. example-tab:: examples/s4u/exec-ptask/s4u-exec-ptask.cpp
448 See also :cpp:func:`simgrid::s4u::this_actor::parallel_execute()`.
450 - **Using Pstates on a host:**
451 This example shows how define a set of pstates in the XML. The current pstate
452 of an host can then be accessed and changed from the program.
456 .. example-tab:: examples/s4u/exec-dvfs/s4u-exec-dvfs.cpp
458 See also :cpp:func:`simgrid::s4u::Host::get_pstate_speed` and :cpp:func:`simgrid::s4u::Host::set_pstate`.
460 .. example-tab:: examples/c/exec-dvfs/exec-dvfs.c
462 See also :cpp:func:`sg_host_get_pstate_speed` and :cpp:func:`sg_host_set_pstate`.
464 .. example-tab:: examples/python/exec-dvfs/exec-dvfs.py
466 See also :py:func:`Host.get_pstate_speed` and :py:func:`Host.set_pstate`.
468 .. example-tab:: examples/platforms/energy_platform.xml
472 I/O on Disks and Files
473 ----------------------
475 SimGrid provides two levels of abstraction to interact with the
476 simulated disks. At the simplest level, you simply create read and
477 write actions on the disk resources.
479 - **Access to raw disk devices:**
480 This example illustrates how to simply read and write data on a
481 simulated disk resource.
485 .. example-tab:: examples/s4u/io-disk-raw/s4u-io-disk-raw.cpp
487 .. example-tab:: examples/c/io-disk-raw/io-disk-raw.c
489 .. example-tab:: examples/platforms/hosts_with_disks.xml
491 This shows how to declare disks in XML.
493 The FileSystem plugin provides a more detailed view, with the
494 classical operations over files: open, move, unlink, and of course
495 read and write. The file and disk sizes are also dealt with and can
496 result in short reads and short write, as in reality.
498 - **File Management:**
499 This example illustrates the use of operations on files
500 (read, write, seek, tell, unlink, etc).
504 .. example-tab:: examples/s4u/io-file-system/s4u-io-file-system.cpp
507 I/O operations on files can also be done in a remote fashion,
508 i.e. when the accessed disk is not mounted on the caller's host.
512 .. example-tab:: examples/s4u/io-file-remote/s4u-io-file-remote.cpp
514 .. example-tab:: examples/c/io-file-remote/io-file-remote.c
518 Classical synchronization objects
519 ---------------------------------
522 Shows how to use :cpp:type:`simgrid::s4u::Barrier` synchronization objects.
526 .. example-tab:: examples/s4u/synchro-barrier/s4u-synchro-barrier.cpp
528 - **Condition variable:**
529 Shows how to use :cpp:type:`simgrid::s4u::ConditionVariable` synchronization objects.
533 .. example-tab:: examples/s4u/synchro-condition-variable/s4u-synchro-condition-variable.cpp
536 Shows how to use :cpp:type:`simgrid::s4u::Mutex` synchronization objects.
540 .. example-tab:: examples/s4u/synchro-mutex/s4u-synchro-mutex.cpp
543 Shows how to use :cpp:type:`simgrid::s4u::Semaphore` synchronization objects.
547 .. example-tab:: examples/s4u/synchro-semaphore/s4u-synchro-semaphore.cpp
549 =============================
550 Interacting with the Platform
551 =============================
553 - **User-defined properties:**
554 You can attach arbitrary information to most platform elements from
555 the XML file, and then interact with these values from your
556 program. Note that the changes are not written permanently on disk,
557 in the XML file nor anywhere else. They only last until the end of
562 .. example-tab:: examples/s4u/platform-properties/s4u-platform-properties.cpp
564 - :cpp:func:`simgrid::s4u::Actor::get_property()` and :cpp:func:`simgrid::s4u::Actor::set_property()`
565 - :cpp:func:`simgrid::s4u::Host::get_property()` and :cpp:func:`simgrid::s4u::Host::set_property()`
566 - :cpp:func:`simgrid::s4u::Link::get_property()` and :cpp:func:`simgrid::s4u::Link::set_property()`
567 - :cpp:func:`simgrid::s4u::NetZone::get_property()` and :cpp:func:`simgrid::s4u::NetZone::set_property()`
569 .. example-tab:: examples/c/platform-properties/platform-properties.c
571 - :cpp:func:`sg_actor_get_property()` and :cpp:func:`sg_actor_set_property()`
572 - :cpp:func:`sg_host_get_property()` and :cpp:func:sg_host_set_property()`
573 - :cpp:func:`sg_link_get_property()` and :cpp:func:`sg_link_set_property()`
574 - :cpp:func:`sg_link_get_property()` and :cpp:func:`sg_link_set_property()`
580 .. showfile:: examples/s4u/platform-properties/s4u-platform-properties_d.xml
586 .. showfile:: examples/platforms/prop.xml
589 - **Retrieving the netzones matching a given criteria:**
590 Shows how to filter the cluster netzones.
594 .. example-tab:: examples/s4u/routing-get-clusters/s4u-routing-get-clusters.cpp
596 - **Retrieving the list of hosts matching a given criteria:**
597 Shows how to filter the actors that match a given criteria.
601 .. example-tab:: examples/s4u/engine-filtering/s4u-engine-filtering.cpp
603 - **Specifying state profiles:** shows how to specify when the
604 resources must be turned off and on again, and how to react to such
605 failures in your code. See also :ref:`howto_churn`.
609 .. example-tab:: examples/s4u/platform-failures/s4u-platform-failures.cpp
611 .. example-tab:: examples/c/platform-failures/platform-failures.c
615 .. showfile:: examples/platforms/small_platform_failures.xml
618 .. showfile:: examples/platforms/profiles/jupiter_state.profile
620 .. showfile:: examples/platforms/profiles/bourassa_state.profile
622 .. showfile:: examples/platforms/profiles/fafard_state.profile
624 - **Specifying speed profiles:** shows how to specify an external
625 load to resources, variating their peak speed over time.
629 .. example-tab:: examples/s4u/platform-profile/s4u-platform-profile.cpp
633 .. showfile:: examples/platforms/small_platform_profile.xml
636 .. showfile:: examples/platforms/profiles/jupiter_speed.profile
638 .. showfile:: examples/platforms/profiles/link1_bandwidth.profile
640 .. showfile:: examples/platforms/profiles/link1_latency.profile
646 - **Describing the energy profiles in the platform:**
647 This platform file contains the energy profile of each links and
648 hosts, which is necessary to get energy consumption predictions.
649 As usual, you should not trust our example, and you should strive
650 to double-check that your instantiation matches your target platform.
654 .. example-tab:: examples/platforms/energy_platform.xml
656 - **Consumption due to the CPU:**
657 This example shows how to retrieve the amount of energy consumed
658 by the CPU during computations, and the impact of the pstate.
662 .. example-tab:: examples/s4u/energy-exec/s4u-energy-exec.cpp
664 .. example-tab:: examples/c/energy-exec/energy-exec.c
666 - **Consumption due to the network:**
667 This example shows how to retrieve and display the energy consumed
668 by the network during communications.
672 .. example-tab:: examples/s4u/energy-link/s4u-energy-link.cpp
674 - **Modeling the shutdown and boot of hosts:**
675 Simple example of model of model for the energy consumption during
676 the host boot and shutdown periods.
680 .. example-tab:: examples/s4u/energy-boot/platform_boot.xml
682 .. example-tab:: examples/s4u/energy-boot/s4u-energy-boot.cpp
684 =======================
685 Tracing and Visualizing
686 =======================
688 Tracing can be activated by various configuration options which
689 are illustrated in these example. See also the
690 :ref:`full list of options related to tracing <tracing_tracing_options>`.
692 It is interesting to run the process-create example with the following
693 options to see the task executions:
695 - **Platform Tracing:**
696 This program is a toy example just loading the platform, so that
697 you can play with the platform visualization. Recommended options:
698 ``--cfg=tracing:yes --cfg=tracing/categorized:yes``
702 .. example-tab:: examples/s4u/trace-platform/s4u-trace-platform.cpp
704 ========================
705 Larger SimGrid Examplars
706 ========================
708 This section contains application examples that are somewhat larger
709 than the previous examples.
712 This simple example just sends one message back and forth.
713 The tesh file laying in the directory show how to start the simulator binary, highlighting how to pass options to
714 the simulators (as detailed in Section :ref:`options`).
718 .. example-tab:: examples/s4u/app-pingpong/s4u-app-pingpong.cpp
720 .. example-tab:: examples/c/app-pingpong/app-pingpong.c
723 Shows how to implement a classical communication pattern, where a
724 token is exchanged along a ring to reach every participant.
728 .. example-tab:: examples/s4u/app-token-ring/s4u-app-token-ring.cpp
730 .. example-tab:: examples/c/app-token-ring/app-token-ring.c
732 - **Master Workers:**
733 Another good old example, where one Master process has a bunch of task to dispatch to a set of several Worker
740 This example comes in two equivalent variants, one where the actors
741 are specified as simple functions (which is easier to understand for
742 newcomers) and one where the actors are specified as classes (which is
743 more powerful for the users wanting to build their own projects upon
746 .. showfile:: examples/s4u/app-masterworkers/s4u-app-masterworkers-class.cpp
749 .. showfile:: examples/s4u/app-masterworkers/s4u-app-masterworkers-fun.cpp
754 .. showfile:: examples/c/app-masterworker/app-masterworker.c
761 Classical protocol for Peer-to-Peer data diffusion.
767 .. showfile:: examples/s4u/app-bittorrent/s4u-bittorrent.cpp
770 .. showfile:: examples/s4u/app-bittorrent/s4u-peer.cpp
773 .. showfile:: examples/s4u/app-bittorrent/s4u-tracker.cpp
778 .. showfile:: examples/c/app-bittorrent/app-bittorrent.c
781 .. showfile:: examples/c/app-bittorrent/bittorrent-peer.c
784 .. showfile:: examples/c/app-bittorrent/tracker.c
788 Data broadcast over a ring of processes.
792 .. example-tab:: examples/s4u/app-chainsend/s4u-app-chainsend.cpp
796 .. showfile:: examples/c/app-chainsend/chainsend.c
799 .. showfile:: examples/c/app-chainsend/broadcaster.c
802 .. showfile:: examples/c/app-chainsend/peer.c
805 Distributed Hash Tables (DHT)
806 -----------------------------
809 One of the most famous DHT protocol.
815 .. showfile:: examples/s4u/dht-chord/s4u-dht-chord.cpp
818 .. showfile:: examples/s4u/dht-chord/s4u-dht-chord-node.cpp
822 Another well-known DHT protocol.
828 .. showfile:: examples/s4u/dht-kademlia/s4u-dht-kademlia.cpp
831 .. showfile:: examples/s4u/dht-kademlia/routing_table.cpp
834 .. showfile:: examples/s4u/dht-kademlia/answer.cpp
837 .. showfile:: examples/s4u/dht-kademlia/node.cpp
842 .. showfile:: examples/c/dht-kademlia/dht-kademlia.c
845 .. showfile:: examples/c/dht-kademlia/routing_table.c
848 .. showfile:: examples/c/dht-kademlia/answer.c
851 .. showfile:: examples/c/dht-kademlia/message.c
854 .. showfile:: examples/c/dht-kademlia/node.c
863 This example starts some computations both on PMs and VMs, and
864 migrates some VMs around.
868 .. example-tab:: examples/s4u/cloud-simple/s4u-cloud-simple.cpp
870 .. example-tab:: examples/c/cloud-simple/cloud-simple.c
873 This example shows how to migrate VMs between PMs.
877 .. example-tab:: examples/s4u/cloud-migration/s4u-cloud-migration.cpp
879 .. example-tab:: examples/c/cloud-migration/cloud-migration.c
881 =======================
882 Model-Related Examples
883 =======================
885 - **ns-3 as a SimGrid Network Model**
886 This simple ping-pong example demonstrates how to use the bindings to the Network
887 Simulator. The most interesting is probably not the C++ files since
888 they are unchanged from the other simulations, but the associated files,
889 such as the platform file to see how to declare a platform to be used
890 with the ns-3 bindings of SimGrid and the tesh file to see how to actually
891 start a simulation in these settings.
895 .. example-tab:: examples/s4u/network-ns3/s4u-network-ns3.cpp
901 .. showfile:: examples/platforms/small_platform_one_link_routes.xml
906 This demonstrates how to declare a wifi link in your platform and
907 how to use it in your simulation. The basics is to have a link
908 which sharing policy is set to `WIFI`. Such links can have more
909 than one bandwidth value (separated by commas), corresponding to
910 the several SNR level of your wifi link.
912 In this case, SimGrid automatically switches to validated
913 performance models of wifi networks, where the time is shared
914 between users instead of the bandwidth for wired links (the
915 corresponding publication is currently being written).
917 If your wifi link provides more than one SNR level, you can switch
918 the level of a given host using
919 :cpp:func:`simgrid::s4u::Link::set_host_wifi_rate`. By default,
920 the first level is used.
924 .. example-tab:: examples/s4u/network-wifi/s4u-network-wifi.cpp
930 .. showfile:: examples/platforms/wifi.xml
933 =======================
934 Model-Checking Examples
935 =======================
937 The model-checker can be used to exhaustively search for issues in the
938 tested application. It must be activated at compile time, but this
939 mode is rather experimental in SimGrid (as of v3.22). You should not
940 enable it unless you really want to formally verify your applications:
941 SimGrid is slower and maybe less robust when MC is enabled.
944 In this example, two actors send some data to a central server,
945 which asserts that the messages are always received in the same order.
946 This is obviously wrong, and the model-checker correctly finds a
947 counter-example to that assertion.
951 .. example-tab:: examples/s4u/mc-failing-assert/s4u-mc-failing-assert.cpp
957 .. |cpp| image:: /img/lang_cpp.png
961 .. |py| image:: /img/lang_python.png