1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
65 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
68 if ((NOT DEFINED enable_smpi) OR enable_smpi)
69 # First unset the compiler in case we're re-running cmake over a previous
70 # configuration where it was saved as smpiff
71 unset(CMAKE_Fortran_COMPILER)
75 enable_language(Fortran OPTIONAL)
78 if(CMAKE_Fortran_COMPILER)
79 # Fortran compiler detected: save it, then replace by smpiff
80 set(SAVED_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
81 set(CMAKE_Fortran_COMPILER smpiff)
83 endif(CMAKE_Fortran_COMPILER)
87 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
88 # Build the version number #
89 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
91 set(SIMGRID_VERSION_MAJOR "3")
92 set(SIMGRID_VERSION_MINOR "13")
93 set(SIMGRID_VERSION_PATCH "91")
94 set(SIMGRID_VERSION_EXTRA "-alpha") # Extra words to add to version string (e.g. -rc1)
96 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
98 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
99 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
101 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
104 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
106 set(libsimgrid_version "${release_version}")
107 set(libsimgrid-java_version "${release_version}")
109 ### SET THE LIBRARY EXTENSION
119 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION)
120 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
122 ### Set the library providing dlopen
123 if("${CMAKE_SYSTEM}" MATCHES "Linux")
124 find_library(DL_LIBRARY dl)
125 endif("${CMAKE_SYSTEM}" MATCHES "Linux")
127 ### Find programs and paths
128 FIND_PROGRAM(GCOV_PATH gcov)
131 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
134 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
135 set(PythonInterp_FIND_VERSION 3)
136 set(PythonInterp_FIND_VERSION_COUNT 1)
137 set(PythonInterp_FIND_VERSION_MAJOR 3)
138 include(FindPythonInterp)
139 if(NOT PYTHONINTERP_FOUND)
140 message(FATAL_ERROR "Please install Python (version 3 or higher).")
144 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
145 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
147 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
149 ### Compute the include paths
151 ${CMAKE_HOME_DIRECTORY}
152 ${CMAKE_HOME_DIRECTORY}/include
153 ${CMAKE_HOME_DIRECTORY}/src/include
155 ${CMAKE_BINARY_DIR}/include
158 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
159 set(INCLUDES ${INCLUDES} /usr/include/)
163 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
164 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
165 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
166 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
167 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
168 unset(CMAKE_INCLUDE_WIN)
171 include_directories(${INCLUDES})
173 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
174 set(SIMGRID_DEP "-lm")
176 ### Determine the assembly flavor that we need today
177 set(HAVE_RAW_CONTEXTS 0)
178 include(CMakeDetermineSystem)
179 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
180 IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
181 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
182 set(SIMGRID_PROCESSOR_i686 1)
183 set(SIMGRID_PROCESSOR_x86_64 0)
185 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
186 set(SIMGRID_PROCESSOR_i686 0)
187 set(SIMGRID_PROCESSOR_x86_64 1)
190 message(STATUS "Disable fast raw contexts on Windows.")
192 set(HAVE_RAW_CONTEXTS 1)
195 set(SIMGRID_PROCESSOR_i686 0)
196 set(SIMGRID_PROCESSOR_x86_64 0)
199 include(CheckFunctionExists)
200 include(CheckTypeSize)
201 include(CheckIncludeFile)
202 include(CheckIncludeFiles)
203 include(CheckLibraryExists)
204 include(CheckSymbolExists)
207 include(FindGraphviz)
211 include(FindLuaSimgrid)
218 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
223 set(Boost_USE_STATIC_LIBS 1)
229 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
233 # Not finding this is perfectly OK
234 find_package(Boost COMPONENTS unit_test_framework)
235 if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
236 message("-- (enabling the Boost-based unit tests)")
238 message("-- (disabling the Boost-based unit tests -- please install libboost-test-dev)")
242 find_package(Boost 1.48)
244 include_directories(${Boost_INCLUDE_DIRS})
247 message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython'")
249 message(FATAL_ERROR "Boost libraries not found. Install libboost-dev (>= 1.48.0).")
253 #Boost context 1.61 will break compatibility with our implementation.
254 #Warn users about that
255 find_package(Boost 1.61 COMPONENTS context)
257 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
258 message(" WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
261 set(HAVE_BOOST_CONTEXTS 0)
263 # Try again to see if we have libboost-context
264 find_package(Boost 1.42 COMPONENTS context)
265 set(Boost_FOUND 1) # We don't care of whether this component is missing
267 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
268 # We should use feature detection for this instead:
269 if (Boost_VERSION LESS 105600)
270 message("Found Boost.Context API v1")
271 set(HAVE_BOOST_CONTEXTS 1)
273 message("Found Boost.Context API v2")
274 set(HAVE_BOOST_CONTEXTS 2)
277 message (" boost : found.")
278 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
279 set(HAVE_BOOST_CONTEXTS 0)
283 # Checks for header libraries functions.
284 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
286 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
287 if(NOT APPLE) # OS X El Capitan deprecates this function
288 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
290 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
291 set(HAVE_PTHREAD_SETAFFINITY 0)
292 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
294 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
295 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
297 # Use the GNU version of unusual modifiers like PRIx64
298 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
299 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
301 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
304 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
305 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
306 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
307 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
308 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
309 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
310 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
311 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
313 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
314 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
315 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
316 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
317 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
318 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
319 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
320 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
321 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
322 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
324 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
326 # The detection of vasprintf fails on MinGW, assumingly because it's
327 # defined as an inline function in stdio.h instead of a regular
328 # function. So force the result to be 1 despite of the test.
329 set(HAVE_VASPRINTF 1)
332 #Check if __thread is defined
334 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
335 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
336 RESULT_VARIABLE HAVE_thread_storage_run)
337 file(REMOVE testprog)
338 if(HAVE_thread_storage_run)
339 set(HAVE_THREAD_LOCAL_STORAGE 1)
341 set(HAVE_THREAD_LOCAL_STORAGE 0)
344 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
345 message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
346 set(enable_model-checking FALSE)
349 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
353 if(enable_model-checking)
354 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
356 SET(enable_model-checking 0)
365 if(enable_mallocators)
366 SET(HAVE_MALLOCATOR 1)
368 SET(HAVE_MALLOCATOR 0)
371 include(FindLibunwind)
374 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind")
376 # Apple forbids to link directly against its libunwind implementation
377 # So let's comply and link against the System framework
378 SET(SIMGRID_DEP "${SIMGRID_DEP} -lSystem")
380 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
381 set(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-ptrace")
382 # This supposes that the host machine is either an AMD or a X86.
383 # This is deeply wrong, and should be fixed by manually loading -lunwind-PLAT (FIXME)
384 if(SIMGRID_PROCESSOR_x86_64)
385 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86_64")
387 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86")
391 if(enable_model-checking)
392 message(FATAL_ERROR "Please either install the libunwind7-dev package (or equivalent) or turn off the model-checking option of SimGrid.")
396 if(enable_model-checking)
397 find_package(Libdw REQUIRED)
398 find_package(Libevent REQUIRED)
399 include_directories(${LIBDW_INCLUDE_DIRS} ${LIBEVENT_INCLUDE_DIRS})
400 set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBDW_LIBRARIES}")
402 if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
403 message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling java")
404 set(enable_java FALSE)
411 if (enable_model-checking AND enable_ns3)
412 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
417 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
419 SET(HAVE_PRIVATIZATION 1)
421 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
422 SET(HAVE_PRIVATIZATION 0)
428 #--------------------------------------------------------------------------------------------------
429 ### Check for GNU dynamic linker
430 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
432 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
433 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
434 OUTPUT_VARIABLE HAVE_GNU_LD_compil
436 if(HAVE_GNU_LD_compil)
438 message(STATUS "Warning: test program toward GNU ld failed to compile:")
439 message(STATUS "${HAVE_GNU_LD_comp_output}")
441 execute_process(COMMAND ./test_gnu_ld
442 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
443 RESULT_VARIABLE HAVE_GNU_LD_run
444 OUTPUT_VARIABLE var_exec
447 if(NOT HAVE_GNU_LD_run)
449 message(STATUS "We are using GNU dynamic linker")
452 message(STATUS "Warning: error while checking for GNU ld:")
453 message(STATUS "Test output: '${var_exec}'")
454 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
456 file(REMOVE test_gnu_ld)
460 #--------------------------------------------------------------------------------------------------
461 ### Initialize of CONTEXT THREADS
463 set(HAVE_THREAD_CONTEXTS 0)
465 ### Test that we have a way to create semaphores
467 if(HAVE_SEM_OPEN_LIB)
468 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
469 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
470 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
473 # Test sem_open by compiling:
474 if(HAVE_SEM_OPEN_compil)
476 message(STATUS "Warning: sem_open not compilable")
477 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
480 message(STATUS "sem_open is compilable")
483 # If we're not crosscompiling, we check by executing the program:
484 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
485 execute_process(COMMAND ./sem_open
486 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
487 RESULT_VARIABLE HAVE_SEM_OPEN_run
488 OUTPUT_VARIABLE var_compil
490 if (NOT HAVE_SEM_OPEN_run)
492 message(STATUS "sem_open is executable")
495 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
496 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
498 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
500 message(STATUS "Warning: sem_open not executable")
501 message(STATUS "Compilation output: '${var_compil}'")
502 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
505 file(REMOVE sem_open)
510 if(HAVE_SEM_INIT_LIB)
511 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
512 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
513 RESULT_VARIABLE HAVE_SEM_INIT_run
514 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
516 # Test sem_init by compiling:
517 if(HAVE_SEM_INIT_compil)
519 message(STATUS "Warning: sem_init not compilable")
520 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
523 message(STATUS "sem_init is compilable")
526 # If we're not crosscompiling, we check by executing the program:
527 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
528 execute_process(COMMAND ./sem_init
529 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
530 RESULT_VARIABLE HAVE_SEM_INIT_run
531 OUTPUT_VARIABLE var_compil
533 if (NOT HAVE_SEM_INIT_run)
535 message(STATUS "sem_init is executable")
538 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
539 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
541 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
543 message(STATUS "Warning: sem_init not executable")
544 message(STATUS "Compilation output: '${var_compil}'")
545 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
548 file(REMOVE sem_init)
553 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
554 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
557 set(HAVE_THREAD_CONTEXTS 1)
558 message("-- Support for thread context factory ok.")
561 set(HAVE_UCONTEXT_CONTEXTS 0)
562 if(NOT HAVE_UCONTEXT_H)
563 message("-- No ucontext factory: <ucontext.h> not found.")
565 message("-- No ucontext factory: Apple don't want us to use them.")
566 set(HAVE_UCONTEXT_H 0)
568 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
569 OUTPUT_VARIABLE compile_makecontext_output)
571 #If can have both context
572 if(compile_makecontext)
573 set(HAVE_UCONTEXT_CONTEXTS 1)
574 message("-- Support for ucontext factory ok.")
576 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
577 message("-- No ucontext factory: makecontext() is not compilable.")
580 # Stack setup (size and address)
581 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
582 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
583 RUN_OUTPUT_VARIABLE stack_setup)
585 LIST(LENGTH stack_setup stack_setup_len)
586 if("${stack_setup_len}" STREQUAL "2")
587 LIST(GET stack_setup 0 makecontext_addr)
588 LIST(GET stack_setup 1 makecontext_size)
589 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
590 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
592 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
596 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
597 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
599 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
600 RUN_OUTPUT_VARIABLE stack
601 COPY_FILE test_stackgrowth)
603 if("${stack}" STREQUAL "down")
604 set(PTH_STACKGROWTH "-1")
605 elseif("${stack}" STREQUAL "up")
606 set(PTH_STACKGROWTH "1")
608 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
609 set(PTH_STACKGROWTH "-1")
610 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
611 set(PTH_STACKGROWTH "-1")
613 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
616 # If the test ran well, remove the test binary
617 file(REMOVE test_stackgrowth)
618 #--------------------------------------------------------------------------------------------------
620 ### check for addr2line
621 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
623 set(ADDR2LINE "${ADDR2LINE}/addr2line")
629 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
633 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
634 OUTPUT_VARIABLE remote
635 OUTPUT_STRIP_TRAILING_WHITESPACE)
636 #message(STATUS "Git remote: ${remote}")
637 execute_process(COMMAND git config --get remote.${remote}.url
638 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
640 OUTPUT_STRIP_TRAILING_WHITESPACE)
641 #message(STATUS "Git url: ${url}")
643 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
644 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
645 OUTPUT_VARIABLE GIT_VERSION
646 OUTPUT_STRIP_TRAILING_WHITESPACE)
647 message(STATUS "Git version: ${GIT_VERSION}")
649 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
650 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
651 OUTPUT_VARIABLE GIT_DATE
652 OUTPUT_STRIP_TRAILING_WHITESPACE)
653 message(STATUS "Git date: ${GIT_DATE}")
654 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
656 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
657 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
658 OUTPUT_VARIABLE SIMGRID_GITHASH
659 OUTPUT_STRIP_TRAILING_WHITESPACE)
661 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
662 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
665 ### Generate the required headers and scripts
666 #############################################
668 # Avoid triggering a (full) rebuild by touching the files if they did not really change
669 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
670 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
671 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
672 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
673 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
674 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
676 # We need two versions of the SMPI scripts because they contain the path to the library
677 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
679 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
681 ### SMPI script used when simgrid is installed
682 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
683 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
684 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
685 set(libdir ${exec_prefix}/lib)
686 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
688 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
690 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
692 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
693 foreach(script cc cxx ff f90 run)
694 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
697 ### SMPI scripts used when compiling simgrid
698 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
699 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
700 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
701 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
702 set(libdir "${CMAKE_BINARY_DIR}/lib")
703 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
705 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
707 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
709 foreach(script cc cxx ff f90 run)
710 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
714 foreach(script cc cxx ff f90 run)
715 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
716 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
720 set(generated_headers_to_install
721 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
722 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
725 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
727 set(generated_files_to_clean
729 ${generated_headers_to_install}
730 ${CMAKE_BINARY_DIR}/bin/smpicc
731 ${CMAKE_BINARY_DIR}/bin/smpicxx
732 ${CMAKE_BINARY_DIR}/bin/smpiff
733 ${CMAKE_BINARY_DIR}/bin/smpif90
734 ${CMAKE_BINARY_DIR}/bin/smpirun
735 ${CMAKE_BINARY_DIR}/bin/colorize
736 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
737 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
740 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
741 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
742 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
743 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
744 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
745 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
746 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
747 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
748 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
749 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
751 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
785 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
786 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
787 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
788 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
789 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
791 set(generated_files_to_clean
792 ${generated_files_to_clean}
793 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
794 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
795 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
796 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
797 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
798 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
799 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
800 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
802 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
805 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
836 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
837 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
838 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
839 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
840 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
844 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
845 "${generated_files_to_clean}")
847 ### Define source packages for Libs
848 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
850 ### Build some Maintainer files
851 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
852 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
854 ### Setup gcc & clang flags
856 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
861 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
863 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
867 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
871 if(enable_memcheck_xml)
872 set(enable_memcheck true)
877 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
878 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
880 ### Define subdirectories
881 foreach(cmakefile ${CMAKEFILES_TXT})
882 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
883 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
886 ### Setup the distrib
887 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
889 ### Build the docs if asked to
890 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
892 ### Print the result of configuration
894 message("##########################################")
895 message("#### Content of src/internal_config.h ####")
896 message("##########################################")
897 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
898 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
899 foreach(line ${config_output})
902 message("##########################################")
903 message("#### Content of simgrid_config.h ####")
904 message("##########################################")
905 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
906 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
907 foreach(line ${config_output})
910 message("##########################################")
911 message("#### End of configuration headers ####")
912 message("##########################################")
914 message("\nConfiguration of package `simgrid':")
915 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
916 message(" Build Name ..................: ${BUILDNAME}")
917 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
918 message(" Site ........................: ${SITE}")
919 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
921 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
923 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
926 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
927 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
928 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
929 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
930 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
932 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
933 message(" version .............: ${Java_VERSION_STRING}")
935 message(" SWIG ................: Version ${SWIG_VERSION} found.")
937 message(" SWIG ................: Missing.")
940 if(CMAKE_Fortran_COMPILER)
941 message(" Compiler: Fortran ...........: ${SAVED_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
942 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
944 message(" Linker: .....................: ${CMAKE_LINKER}")
945 message(" version .............: ${LINKER_VERSION}")
946 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
948 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
949 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
950 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
951 message(" with LTO ....................: ${enable_lto}")
955 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
957 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
961 message(" Compile Java ................: yes")
962 message(" Native lib in jar .........: ${enable_lib_in_jar}")
964 message(" Compile Java ................: NO")
966 message(" Compile Lua .................: ${HAVE_LUA}")
967 message(" Compile Smpi ................: ${HAVE_SMPI}")
968 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
969 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
970 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
971 message(" PAPI support...............: ${HAVE_PAPI}")
972 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
974 message(" Maintainer mode .............: ${enable_maintainer_mode}")
975 message(" Documentation................: ${enable_documentation}")
976 message(" Model checking ..............: ${HAVE_MC}")
977 message(" Jedule mode ................: ${HAVE_JEDULE}")
978 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
979 message(" Mallocators .................: ${enable_mallocators}")
981 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
984 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
985 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
986 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")