1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
64 if ((NOT DEFINED enable_smpi OR enable_smpi) AND NOT APPLE) # smpi is enabled by default
65 # Call enable_language(Fortran) in order to load the build rules for this language, needed by
66 # teshsuite/smpi/mpich-test/. Use CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working compiler (smpiff
67 # doesn't exist at configure time).
68 include(CMakeForceCompiler)
69 if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER)
70 MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id)
71 SET(CMAKE_Fortran_COMPILER "${compiler}")
72 SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
73 SET(CMAKE_Fortran_COMPILER_ID ${id})
74 SET(CMAKE_Fortran_COMPILER_WORKS TRUE)
75 SET(CMAKE_Fortran_COMPILER_FORCED TRUE)
77 # Set old compiler id variables.
78 IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
79 SET(CMAKE_COMPILER_IS_GNUG77 1)
80 ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
81 ENDMACRO(CMAKE_FORCE_Fortran_COMPILER)
83 CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff)
84 enable_language(Fortran OPTIONAL)
87 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
88 # Build the version number #
89 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
91 set(SIMGRID_VERSION_MAJOR "3")
92 set(SIMGRID_VERSION_MINOR "13")
93 set(SIMGRID_VERSION_PATCH "90")
94 set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1)
96 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
98 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
99 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
101 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
104 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
106 set(libsimgrid_version "${release_version}")
107 set(libsimgrid-java_version "${release_version}")
109 ### SET THE LIBRARY EXTENSION
121 execute_process(COMMAND ${CMAKE_LINKER} --version OUTPUT_VARIABLE LINKER_VERSION)
122 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
124 ### Find programs and paths
125 FIND_PROGRAM(GCOV_PATH gcov)
128 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
132 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
133 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
135 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
137 ### Compute the include paths
139 ${CMAKE_HOME_DIRECTORY}
140 ${CMAKE_HOME_DIRECTORY}/include
141 ${CMAKE_HOME_DIRECTORY}/src/include
143 ${CMAKE_BINARY_DIR}/include
146 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
147 set(INCLUDES ${INCLUDES} /usr/include/)
150 ### Check 32bits or 64bits
151 IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
158 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
159 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
160 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
161 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
162 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
163 unset(CMAKE_INCLUDE_WIN)
166 include_directories(${INCLUDES})
169 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
171 ### Determine the assembly flavor that we need today
172 set(HAVE_RAW_CONTEXTS 0)
173 include(CMakeDetermineSystem)
174 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
176 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
177 set(PROCESSOR_i686 1)
178 set(PROCESSOR_x86_64 0)
180 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
181 set(PROCESSOR_i686 0)
182 set(PROCESSOR_x86_64 1)
185 message(STATUS "Disable fast raw contexts on Windows.")
187 set(HAVE_RAW_CONTEXTS 1)
190 set(PROCESSOR_i686 0)
191 set(PROCESSOR_x86_64 0)
194 include(CheckFunctionExists)
195 include(CheckTypeSize)
196 include(CheckIncludeFile)
197 include(CheckIncludeFiles)
198 include(CheckLibraryExists)
199 include(CheckSymbolExists)
202 include(FindGraphviz)
206 include(FindLuaSimgrid)
213 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
218 set(Boost_USE_STATIC_LIBS 1)
224 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
228 find_package(Boost 1.48)
230 include_directories(${Boost_INCLUDE_DIRS})
233 message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
235 message(FATAL_ERROR "Failed to find Boost libraries."
236 "Did you install libboost-dev and libboost-context-dev?"
237 "(libboost-context-dev is optional)"
238 "SimGrid requires Boost >= 1.48.0")
242 #Boost context 1.61 will break compatibility with our implementation.
243 #Warn users about that
244 find_package(Boost 1.61 COMPONENTS context)
246 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
247 message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
250 set(HAVE_BOOST_CONTEXTS 0)
252 # Try again to see if we have libboost-context
253 find_package(Boost 1.42 COMPONENTS context)
254 set(Boost_FOUND 1) # We don't care of whether this component is missing
256 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
257 # We should use feature detection for this instead:
258 if (Boost_VERSION LESS 105600)
259 message("Found Boost.Context API v1")
260 set(HAVE_BOOST_CONTEXTS 1)
262 message("Found Boost.Context API v2")
263 set(HAVE_BOOST_CONTEXTS 2)
266 message (" boost : found.")
267 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
268 set(HAVE_BOOST_CONTEXTS 0)
272 # Try again to see if we have libboost-graph
273 #find_package(Boost 1.42 COMPONENTS graph)
274 #set(Boost_FOUND 1) # We don't care of whether this component is missing
276 #if(Boost_FOUND AND Boost_GRAPH_FOUND)
277 # set(HAVE_BOOST_GRAPH 1)
279 # message (" boost : found.")
280 # message (" boost-graph : missing. Install libboost-graph-dev for this optional feature.")
281 # set(HAVE_BOOST_GRAPH 0)
284 # Checks for header libraries functions.
285 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
287 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
288 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
289 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
290 set(HAVE_PTHREAD_SETAFFINITY 0)
291 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
293 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
294 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
296 # Use the GNU version of unusual modifiers like PRIx64
297 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
298 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
300 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
303 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
304 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
305 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
306 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
307 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
308 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
309 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
310 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
312 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
313 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
314 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
315 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
316 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
317 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
318 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
319 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
321 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
323 # The detection of vasprintf fails on MinGW, assumingly because it's
324 # defined as an inline function in stdio.h instead of a regular
325 # function. So force the result to be 1 despite of the test.
326 set(HAVE_VASPRINTF 1)
329 #Check if __thread is defined
331 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
332 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
333 RESULT_VARIABLE HAVE_thread_storage_run)
334 file(REMOVE testprog)
335 if(HAVE_thread_storage_run)
336 set(HAVE_THREAD_LOCAL_STORAGE 1)
338 set(HAVE_THREAD_LOCAL_STORAGE 0)
341 # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
343 NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND
344 NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND
345 NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND
346 NOT "${CMAKE_SYSTEM}" MATCHES "Darwin")
348 message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
351 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
363 if(enable_mallocators)
364 SET(HAVE_MALLOCATOR 1)
366 SET(HAVE_MALLOCATOR 0)
369 if(enable_model-checking AND HAVE_MMALLOC)
371 include(FindLibunwind)
374 if(enable_model-checking)
375 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
381 if (enable_model-checking AND enable_ns3)
382 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
386 include(FindGFortran)
388 if("${CMAKE_SYSTEM}" MATCHES "Linux")
390 SET(HAVE_PRIVATIZATION 1)
391 elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD")
393 SET(HAVE_PRIVATIZATION 0)
395 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
396 SET(HAVE_PRIVATIZATION 0)
402 #--------------------------------------------------------------------------------------------------
403 ### Check for GNU dynamic linker
404 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
406 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld
407 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
408 OUTPUT_VARIABLE HAVE_GNU_LD_compil
410 if(HAVE_GNU_LD_compil)
412 message(STATUS "Warning: test program toward GNU ld failed to compile:")
413 message(STATUS "${HAVE_GNU_LD_comp_output}")
415 execute_process(COMMAND ./test_gnu_ld
416 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
417 RESULT_VARIABLE HAVE_GNU_LD_run
418 OUTPUT_VARIABLE var_exec
421 if(NOT HAVE_GNU_LD_run)
423 message(STATUS "We are using GNU dynamic linker")
426 message(STATUS "Warning: error while checking for GNU ld:")
427 message(STATUS "Test output: '${var_exec}'")
428 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
430 file(REMOVE test_gnu_ld)
434 #--------------------------------------------------------------------------------------------------
435 ### Initialize of CONTEXT THREADS
437 set(HAVE_THREAD_CONTEXTS 0)
439 ### Test that we have a way to create semaphores
441 if(HAVE_SEM_OPEN_LIB)
442 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
443 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
444 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
447 # Test sem_open by compiling:
448 if(HAVE_SEM_OPEN_compil)
450 message(STATUS "Warning: sem_open not compilable")
451 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
454 message(STATUS "sem_open is compilable")
457 # If we're not crosscompiling, we check by executing the program:
458 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
459 execute_process(COMMAND ./sem_open
460 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
461 RESULT_VARIABLE HAVE_SEM_OPEN_run
462 OUTPUT_VARIABLE var_compil
464 if (NOT HAVE_SEM_OPEN_run)
466 message(STATUS "sem_open is executable")
469 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
470 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
472 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
474 message(STATUS "Warning: sem_open not executable")
475 message(STATUS "Compilation output: '${var_compil}'")
476 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
479 file(REMOVE sem_open)
484 if(HAVE_SEM_INIT_LIB)
485 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
486 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
487 RESULT_VARIABLE HAVE_SEM_INIT_run
488 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
490 # Test sem_init by compiling:
491 if(HAVE_SEM_INIT_compil)
493 message(STATUS "Warning: sem_init not compilable")
494 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
497 message(STATUS "sem_init is compilable")
500 # If we're not crosscompiling, we check by executing the program:
501 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
502 execute_process(COMMAND ./sem_init
503 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
504 RESULT_VARIABLE HAVE_SEM_INIT_run
505 OUTPUT_VARIABLE var_compil
507 if (NOT HAVE_SEM_INIT_run)
509 message(STATUS "sem_init is executable")
512 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
513 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
515 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
517 message(STATUS "Warning: sem_init not executable")
518 message(STATUS "Compilation output: '${var_compil}'")
519 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
522 file(REMOVE sem_init)
525 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
526 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
529 set(HAVE_THREAD_CONTEXTS 1)
530 message("-- Support for thread context factory ok.")
533 set(HAVE_UCONTEXT_CONTEXTS 0)
534 if(NOT HAVE_UCONTEXT_H)
535 message("-- No ucontext factory: <ucontext.h> not found.")
537 message("-- No ucontext factory: Apple don't want us to use them.")
538 set(HAVE_UCONTEXT_H 0)
540 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
541 OUTPUT_VARIABLE compile_makecontext_output)
543 #If can have both context
544 if(compile_makecontext)
545 set(HAVE_UCONTEXT_CONTEXTS 1)
546 message("-- Support for ucontext factory ok.")
548 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
549 message("-- No ucontext factory: makecontext() is not compilable.")
552 # Stack setup (size and address)
553 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
554 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
555 RUN_OUTPUT_VARIABLE stack_setup)
557 LIST(LENGTH stack_setup stack_setup_len)
558 if("${stack_setup_len}" STREQUAL "2")
559 LIST(GET stack_setup 0 makecontext_addr)
560 LIST(GET stack_setup 1 makecontext_size)
561 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
562 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
564 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
568 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
569 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
571 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
572 RUN_OUTPUT_VARIABLE stack
573 COPY_FILE test_stackgrowth)
575 if("${stack}" STREQUAL "down")
576 set(PTH_STACKGROWTH "-1")
577 elseif("${stack}" STREQUAL "up")
578 set(PTH_STACKGROWTH "1")
580 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
581 set(PTH_STACKGROWTH "-1")
582 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
583 set(PTH_STACKGROWTH "-1")
585 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
588 # If the test ran well, remove the test binary
589 file(REMOVE test_stackgrowth)
590 #--------------------------------------------------------------------------------------------------
592 ### check for addr2line
593 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
595 set(ADDR2LINE "${ADDR2LINE}/addr2line")
601 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
605 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
606 OUTPUT_VARIABLE remote
607 OUTPUT_STRIP_TRAILING_WHITESPACE)
608 #message(STATUS "Git remote: ${remote}")
609 execute_process(COMMAND git config --get remote.${remote}.url
610 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
612 OUTPUT_STRIP_TRAILING_WHITESPACE)
613 #message(STATUS "Git url: ${url}")
615 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
616 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
617 OUTPUT_VARIABLE GIT_VERSION
618 OUTPUT_STRIP_TRAILING_WHITESPACE)
619 message(STATUS "Git version: ${GIT_VERSION}")
621 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
622 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
623 OUTPUT_VARIABLE GIT_DATE
624 OUTPUT_STRIP_TRAILING_WHITESPACE)
625 message(STATUS "Git date: ${GIT_DATE}")
626 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
628 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
629 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
630 OUTPUT_VARIABLE SIMGRID_GITHASH
631 OUTPUT_STRIP_TRAILING_WHITESPACE)
633 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
634 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
637 ### Generate the required headers and scripts
638 #############################################
640 # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
641 # but this too error prone. If you forget to include the config.h, you get weird segfaults.
642 # If you include it everywhere, everything gets recompiled everytime.
643 # So we include only where needed, and compile with -Wundef to notice the missing includes.
644 # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
645 # So we have to make sure that everything got a decent value before generating the files.
646 foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN
647 HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF
648 HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF)
656 # Avoid triggering a (full) rebuild by touching the files if they did not really change
657 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
658 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
659 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
660 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
661 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
662 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
664 # We need two versions of the SMPI scripts because they contain the path to the library
665 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
667 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
669 ### SMPI script used when simgrid is installed
670 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
671 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
672 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
673 set(libdir ${exec_prefix}/lib)
674 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
676 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
678 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
680 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
681 foreach(script cc cxx ff f90 run)
682 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
685 ### SMPI scripts used when compiling simgrid
686 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
687 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
688 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
689 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
690 set(libdir "${CMAKE_BINARY_DIR}/lib")
691 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
693 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
695 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
697 foreach(script cc cxx ff f90 run)
698 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
702 foreach(script cc cxx ff f90 run)
703 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
704 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
708 set(generated_headers_to_install
709 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
710 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
713 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
715 set(generated_files_to_clean
717 ${generated_headers_to_install}
718 ${CMAKE_BINARY_DIR}/bin/smpicc
719 ${CMAKE_BINARY_DIR}/bin/smpicxx
720 ${CMAKE_BINARY_DIR}/bin/smpiff
721 ${CMAKE_BINARY_DIR}/bin/smpif90
722 ${CMAKE_BINARY_DIR}/bin/smpirun
723 ${CMAKE_BINARY_DIR}/bin/colorize
724 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
725 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
728 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
729 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
730 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
731 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
732 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
733 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
734 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
735 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
736 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
737 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
738 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
739 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
740 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
741 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
743 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
744 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
745 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
746 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
747 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
748 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
749 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
751 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
754 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
779 set(generated_files_to_clean
780 ${generated_files_to_clean}
781 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
782 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
783 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
784 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
785 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
786 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
787 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
788 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
789 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
790 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
791 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
792 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
793 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
794 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
795 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
796 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
797 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
798 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
799 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
800 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
802 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
805 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
832 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
833 "${generated_files_to_clean}")
835 ### Define source packages for Libs
836 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
838 ### Build some Maintainer files
839 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
840 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
842 ### Setup gcc & clang flags
844 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
849 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
851 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
855 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
859 if(enable_memcheck_xml)
860 set(enable_memcheck true)
865 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
866 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
868 ### Define subdirectories
869 foreach(cmakefile ${CMAKEFILES_TXT})
870 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
871 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
874 ### Setup the distrib
875 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
877 ### Build the doc (Windows downloads the doc instead of regenerating)
880 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
882 find_program(WGET_PROGRAM NAMES wget)
883 message(STATUS "wget: ${WGET_PROGRAM}")
885 ADD_CUSTOM_TARGET(documentation
886 COMMENT "Downloading the SimGrid documentation..."
887 COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/
888 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html
893 ### Print the result of configuration
895 message("##########################################")
896 message("#### Content of src/internal_config.h ####")
897 message("##########################################")
898 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
899 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
900 foreach(line ${config_output})
903 message("##########################################")
904 message("#### Content of simgrid_config.h ####")
905 message("##########################################")
906 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
907 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
908 foreach(line ${config_output})
911 message("##########################################")
912 message("#### End of configuration headers ####")
913 message("##########################################")
915 message("\nConfiguration of package `simgrid':")
916 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
917 message(" Build Name ..................: ${BUILDNAME}")
918 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
919 message(" Site ........................: ${SITE}")
920 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
922 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
924 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
927 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
928 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
929 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
930 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
931 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
933 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
934 message(" version .............: ${Java_VERSION_STRING}")
936 message(" SWIG ................: Version ${SWIG_VERSION} found.")
938 message(" SWIG ................: Missing.")
941 if(CMAKE_Fortran_COMPILER)
942 message(" Compiler: Fortran ...........: ${CMAKE_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
943 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
945 message(" Linker: .....................: ${CMAKE_LINKER}")
946 message(" version .............: ${LINKER_VERSION}")
947 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
949 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
950 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
951 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
952 message(" with LTO ....................: ${enable_lto}")
956 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
958 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
962 message(" Compile Java ................: yes")
963 message(" Native lib in jar .........: ${enable_lib_in_jar}")
965 message(" Compile Java ................: NO")
967 message(" Compile Lua .................: ${HAVE_LUA}")
968 message(" Compile Smpi ................: ${HAVE_SMPI}")
969 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
970 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
971 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
972 message(" PAPI support...............: ${HAVE_PAPI}")
973 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
975 message(" Maintainer mode .............: ${enable_maintainer_mode}")
976 message(" Documentation................: ${enable_documentation}")
977 message(" Model checking ..............: ${HAVE_MC}")
978 message(" Jedule mode ................: ${HAVE_JEDULE}")
979 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
980 message(" Mallocators .................: ${enable_mallocators}")
982 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
985 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
986 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
987 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")