1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
65 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
68 if ((NOT DEFINED enable_smpi) OR enable_smpi)
75 if(NOT APPLE) # smpi is enabled by default
76 # Call enable_language(Fortran) in order to load the build rules for this language, needed by
77 # teshsuite/smpi/mpich-test/. Use CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working compiler (smpiff
78 # doesn't exist at configure time).
79 include(CMakeForceCompiler)
80 if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER)
81 MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id)
82 SET(CMAKE_Fortran_COMPILER "${compiler}")
83 SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
84 SET(CMAKE_Fortran_COMPILER_ID ${id})
85 SET(CMAKE_Fortran_COMPILER_WORKS TRUE)
86 SET(CMAKE_Fortran_COMPILER_FORCED TRUE)
88 # Set old compiler id variables.
89 IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
90 SET(CMAKE_COMPILER_IS_GNUG77 1)
91 ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
92 ENDMACRO(CMAKE_FORCE_Fortran_COMPILER)
94 CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff)
95 enable_language(Fortran OPTIONAL)
99 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
100 # Build the version number #
101 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
103 set(SIMGRID_VERSION_MAJOR "3")
104 set(SIMGRID_VERSION_MINOR "13")
105 set(SIMGRID_VERSION_PATCH "90")
106 set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1)
108 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
110 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
111 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
113 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
116 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
118 set(libsimgrid_version "${release_version}")
119 set(libsimgrid-java_version "${release_version}")
121 ### SET THE LIBRARY EXTENSION
133 execute_process(COMMAND ${CMAKE_LINKER} --version OUTPUT_VARIABLE LINKER_VERSION)
134 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
136 ### Find programs and paths
137 FIND_PROGRAM(GCOV_PATH gcov)
140 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
143 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
144 set(PythonInterp_FIND_VERSION 3)
145 set(PythonInterp_FIND_VERSION_COUNT 1)
146 set(PythonInterp_FIND_VERSION_MAJOR 3)
147 include(FindPythonInterp)
148 if(NOT PYTHONINTERP_FOUND)
149 message(FATAL_ERROR "Please install Python (version 3 or higher).")
153 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
154 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
156 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
158 ### Compute the include paths
160 ${CMAKE_HOME_DIRECTORY}
161 ${CMAKE_HOME_DIRECTORY}/include
162 ${CMAKE_HOME_DIRECTORY}/src/include
164 ${CMAKE_BINARY_DIR}/include
167 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
168 set(INCLUDES ${INCLUDES} /usr/include/)
171 ### Check 32bits or 64bits
172 IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
179 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
180 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
181 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
182 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
183 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
184 unset(CMAKE_INCLUDE_WIN)
187 include_directories(${INCLUDES})
191 ### Determine the assembly flavor that we need today
192 set(HAVE_RAW_CONTEXTS 0)
193 include(CMakeDetermineSystem)
194 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
196 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
197 set(PROCESSOR_i686 1)
198 set(PROCESSOR_x86_64 0)
200 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
201 set(PROCESSOR_i686 0)
202 set(PROCESSOR_x86_64 1)
205 message(STATUS "Disable fast raw contexts on Windows.")
207 set(HAVE_RAW_CONTEXTS 1)
210 set(PROCESSOR_i686 0)
211 set(PROCESSOR_x86_64 0)
214 include(CheckFunctionExists)
215 include(CheckTypeSize)
216 include(CheckIncludeFile)
217 include(CheckIncludeFiles)
218 include(CheckLibraryExists)
219 include(CheckSymbolExists)
222 include(FindGraphviz)
226 include(FindLuaSimgrid)
233 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
238 set(Boost_USE_STATIC_LIBS 1)
244 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
248 find_package(Boost 1.48)
250 include_directories(${Boost_INCLUDE_DIRS})
253 message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
255 message(FATAL_ERROR "Failed to find Boost libraries."
256 "Did you install libboost-dev and libboost-context-dev?"
257 "(libboost-context-dev is optional)"
258 "SimGrid requires Boost >= 1.48.0")
262 #Boost context 1.61 will break compatibility with our implementation.
263 #Warn users about that
264 find_package(Boost 1.61 COMPONENTS context)
266 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
267 message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
270 set(HAVE_BOOST_CONTEXTS 0)
272 # Try again to see if we have libboost-context
273 find_package(Boost 1.42 COMPONENTS context)
274 set(Boost_FOUND 1) # We don't care of whether this component is missing
276 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
277 # We should use feature detection for this instead:
278 if (Boost_VERSION LESS 105600)
279 message("Found Boost.Context API v1")
280 set(HAVE_BOOST_CONTEXTS 1)
282 message("Found Boost.Context API v2")
283 set(HAVE_BOOST_CONTEXTS 2)
286 message (" boost : found.")
287 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
288 set(HAVE_BOOST_CONTEXTS 0)
292 # Try again to see if we have libboost-graph
293 #find_package(Boost 1.42 COMPONENTS graph)
294 #set(Boost_FOUND 1) # We don't care of whether this component is missing
296 #if(Boost_FOUND AND Boost_GRAPH_FOUND)
297 # set(HAVE_BOOST_GRAPH 1)
299 # message (" boost : found.")
300 # message (" boost-graph : missing. Install libboost-graph-dev for this optional feature.")
301 # set(HAVE_BOOST_GRAPH 0)
304 # Checks for header libraries functions.
305 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
307 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
308 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
309 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
310 set(HAVE_PTHREAD_SETAFFINITY 0)
311 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
313 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
314 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
316 # Use the GNU version of unusual modifiers like PRIx64
317 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
318 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
320 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
323 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
324 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
325 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
326 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
327 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
328 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
329 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
330 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
332 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
333 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
334 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
335 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
336 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
337 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
338 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
339 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
341 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
343 # The detection of vasprintf fails on MinGW, assumingly because it's
344 # defined as an inline function in stdio.h instead of a regular
345 # function. So force the result to be 1 despite of the test.
346 set(HAVE_VASPRINTF 1)
349 #Check if __thread is defined
351 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
352 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
353 RESULT_VARIABLE HAVE_thread_storage_run)
354 file(REMOVE testprog)
355 if(HAVE_thread_storage_run)
356 set(HAVE_THREAD_LOCAL_STORAGE 1)
358 set(HAVE_THREAD_LOCAL_STORAGE 0)
361 # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
363 NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND
364 NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND
365 NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND
366 NOT "${CMAKE_SYSTEM}" MATCHES "Darwin")
368 message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
371 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
383 if(enable_mallocators)
384 SET(HAVE_MALLOCATOR 1)
386 SET(HAVE_MALLOCATOR 0)
389 if(enable_model-checking AND HAVE_MMALLOC)
391 include(FindLibunwind)
394 if(enable_model-checking)
395 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
401 if (enable_model-checking AND enable_ns3)
402 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
407 if("${CMAKE_SYSTEM}" MATCHES "Linux")
409 SET(HAVE_PRIVATIZATION 1)
410 elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD")
412 SET(HAVE_PRIVATIZATION 0)
414 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
415 SET(HAVE_PRIVATIZATION 0)
421 #--------------------------------------------------------------------------------------------------
422 ### Check for GNU dynamic linker
423 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
425 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld
426 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
427 OUTPUT_VARIABLE HAVE_GNU_LD_compil
429 if(HAVE_GNU_LD_compil)
431 message(STATUS "Warning: test program toward GNU ld failed to compile:")
432 message(STATUS "${HAVE_GNU_LD_comp_output}")
434 execute_process(COMMAND ./test_gnu_ld
435 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
436 RESULT_VARIABLE HAVE_GNU_LD_run
437 OUTPUT_VARIABLE var_exec
440 if(NOT HAVE_GNU_LD_run)
442 message(STATUS "We are using GNU dynamic linker")
445 message(STATUS "Warning: error while checking for GNU ld:")
446 message(STATUS "Test output: '${var_exec}'")
447 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
449 file(REMOVE test_gnu_ld)
453 #--------------------------------------------------------------------------------------------------
454 ### Initialize of CONTEXT THREADS
456 set(HAVE_THREAD_CONTEXTS 0)
458 ### Test that we have a way to create semaphores
460 if(HAVE_SEM_OPEN_LIB)
461 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
462 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
463 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
466 # Test sem_open by compiling:
467 if(HAVE_SEM_OPEN_compil)
469 message(STATUS "Warning: sem_open not compilable")
470 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
473 message(STATUS "sem_open is compilable")
476 # If we're not crosscompiling, we check by executing the program:
477 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
478 execute_process(COMMAND ./sem_open
479 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
480 RESULT_VARIABLE HAVE_SEM_OPEN_run
481 OUTPUT_VARIABLE var_compil
483 if (NOT HAVE_SEM_OPEN_run)
485 message(STATUS "sem_open is executable")
488 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
489 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
491 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
493 message(STATUS "Warning: sem_open not executable")
494 message(STATUS "Compilation output: '${var_compil}'")
495 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
498 file(REMOVE sem_open)
503 if(HAVE_SEM_INIT_LIB)
504 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
505 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
506 RESULT_VARIABLE HAVE_SEM_INIT_run
507 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
509 # Test sem_init by compiling:
510 if(HAVE_SEM_INIT_compil)
512 message(STATUS "Warning: sem_init not compilable")
513 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
516 message(STATUS "sem_init is compilable")
519 # If we're not crosscompiling, we check by executing the program:
520 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
521 execute_process(COMMAND ./sem_init
522 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
523 RESULT_VARIABLE HAVE_SEM_INIT_run
524 OUTPUT_VARIABLE var_compil
526 if (NOT HAVE_SEM_INIT_run)
528 message(STATUS "sem_init is executable")
531 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
532 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
534 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
536 message(STATUS "Warning: sem_init not executable")
537 message(STATUS "Compilation output: '${var_compil}'")
538 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
541 file(REMOVE sem_init)
544 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
545 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
548 set(HAVE_THREAD_CONTEXTS 1)
549 message("-- Support for thread context factory ok.")
552 set(HAVE_UCONTEXT_CONTEXTS 0)
553 if(NOT HAVE_UCONTEXT_H)
554 message("-- No ucontext factory: <ucontext.h> not found.")
556 message("-- No ucontext factory: Apple don't want us to use them.")
557 set(HAVE_UCONTEXT_H 0)
559 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
560 OUTPUT_VARIABLE compile_makecontext_output)
562 #If can have both context
563 if(compile_makecontext)
564 set(HAVE_UCONTEXT_CONTEXTS 1)
565 message("-- Support for ucontext factory ok.")
567 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
568 message("-- No ucontext factory: makecontext() is not compilable.")
571 # Stack setup (size and address)
572 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
573 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
574 RUN_OUTPUT_VARIABLE stack_setup)
576 LIST(LENGTH stack_setup stack_setup_len)
577 if("${stack_setup_len}" STREQUAL "2")
578 LIST(GET stack_setup 0 makecontext_addr)
579 LIST(GET stack_setup 1 makecontext_size)
580 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
581 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
583 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
587 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
588 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
590 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
591 RUN_OUTPUT_VARIABLE stack
592 COPY_FILE test_stackgrowth)
594 if("${stack}" STREQUAL "down")
595 set(PTH_STACKGROWTH "-1")
596 elseif("${stack}" STREQUAL "up")
597 set(PTH_STACKGROWTH "1")
599 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
600 set(PTH_STACKGROWTH "-1")
601 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
602 set(PTH_STACKGROWTH "-1")
604 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
607 # If the test ran well, remove the test binary
608 file(REMOVE test_stackgrowth)
609 #--------------------------------------------------------------------------------------------------
611 ### check for addr2line
612 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
614 set(ADDR2LINE "${ADDR2LINE}/addr2line")
620 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
624 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
625 OUTPUT_VARIABLE remote
626 OUTPUT_STRIP_TRAILING_WHITESPACE)
627 #message(STATUS "Git remote: ${remote}")
628 execute_process(COMMAND git config --get remote.${remote}.url
629 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
631 OUTPUT_STRIP_TRAILING_WHITESPACE)
632 #message(STATUS "Git url: ${url}")
634 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
635 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
636 OUTPUT_VARIABLE GIT_VERSION
637 OUTPUT_STRIP_TRAILING_WHITESPACE)
638 message(STATUS "Git version: ${GIT_VERSION}")
640 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
641 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
642 OUTPUT_VARIABLE GIT_DATE
643 OUTPUT_STRIP_TRAILING_WHITESPACE)
644 message(STATUS "Git date: ${GIT_DATE}")
645 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
647 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
648 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
649 OUTPUT_VARIABLE SIMGRID_GITHASH
650 OUTPUT_STRIP_TRAILING_WHITESPACE)
652 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
653 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
656 ### Generate the required headers and scripts
657 #############################################
659 # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
660 # but this too error prone. If you forget to include the config.h, you get weird segfaults.
661 # If you include it everywhere, everything gets recompiled everytime.
662 # So we include only where needed, and compile with -Wundef to notice the missing includes.
663 # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
664 # So we have to make sure that everything got a decent value before generating the files.
665 foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN
666 HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF
667 HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF)
675 # Avoid triggering a (full) rebuild by touching the files if they did not really change
676 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
677 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
678 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
679 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
680 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
681 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
683 # We need two versions of the SMPI scripts because they contain the path to the library
684 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
686 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
688 ### SMPI script used when simgrid is installed
689 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
690 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
691 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
692 set(libdir ${exec_prefix}/lib)
693 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
695 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
697 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
699 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
700 foreach(script cc cxx ff f90 run)
701 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
704 ### SMPI scripts used when compiling simgrid
705 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
706 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
707 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
708 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
709 set(libdir "${CMAKE_BINARY_DIR}/lib")
710 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
712 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
714 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
716 foreach(script cc cxx ff f90 run)
717 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
721 foreach(script cc cxx ff f90 run)
722 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
723 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
727 set(generated_headers_to_install
728 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
729 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
732 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
734 set(generated_files_to_clean
736 ${generated_headers_to_install}
737 ${CMAKE_BINARY_DIR}/bin/smpicc
738 ${CMAKE_BINARY_DIR}/bin/smpicxx
739 ${CMAKE_BINARY_DIR}/bin/smpiff
740 ${CMAKE_BINARY_DIR}/bin/smpif90
741 ${CMAKE_BINARY_DIR}/bin/smpirun
742 ${CMAKE_BINARY_DIR}/bin/colorize
743 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
744 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
747 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
748 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
749 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
751 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
754 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
785 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
786 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
787 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
788 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
789 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
790 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
791 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
792 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
793 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
794 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
795 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
796 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
798 set(generated_files_to_clean
799 ${generated_files_to_clean}
800 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
802 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
805 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
812 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
836 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
837 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
838 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
839 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
840 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
841 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
842 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
843 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
844 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
845 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
846 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
847 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
851 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
852 "${generated_files_to_clean}")
854 ### Define source packages for Libs
855 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
857 ### Build some Maintainer files
858 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
859 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
861 ### Setup gcc & clang flags
863 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
868 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
870 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
874 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
878 if(enable_memcheck_xml)
879 set(enable_memcheck true)
884 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
885 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
887 ### Define subdirectories
888 foreach(cmakefile ${CMAKEFILES_TXT})
889 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
890 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
893 ### Setup the distrib
894 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
896 ### Build the doc (Windows downloads the doc instead of regenerating)
899 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
901 find_program(WGET_PROGRAM NAMES wget)
902 message(STATUS "wget: ${WGET_PROGRAM}")
904 ADD_CUSTOM_TARGET(documentation
905 COMMENT "Downloading the SimGrid documentation..."
906 COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/
907 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html
912 ### Print the result of configuration
914 message("##########################################")
915 message("#### Content of src/internal_config.h ####")
916 message("##########################################")
917 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
918 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
919 foreach(line ${config_output})
922 message("##########################################")
923 message("#### Content of simgrid_config.h ####")
924 message("##########################################")
925 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
926 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
927 foreach(line ${config_output})
930 message("##########################################")
931 message("#### End of configuration headers ####")
932 message("##########################################")
934 message("\nConfiguration of package `simgrid':")
935 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
936 message(" Build Name ..................: ${BUILDNAME}")
937 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
938 message(" Site ........................: ${SITE}")
939 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
941 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
943 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
946 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
947 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
948 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
949 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
950 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
952 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
953 message(" version .............: ${Java_VERSION_STRING}")
955 message(" SWIG ................: Version ${SWIG_VERSION} found.")
957 message(" SWIG ................: Missing.")
960 if(CMAKE_Fortran_COMPILER)
961 message(" Compiler: Fortran ...........: ${CMAKE_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
962 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
964 message(" Linker: .....................: ${CMAKE_LINKER}")
965 message(" version .............: ${LINKER_VERSION}")
966 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
968 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
969 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
970 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
971 message(" with LTO ....................: ${enable_lto}")
975 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
977 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
981 message(" Compile Java ................: yes")
982 message(" Native lib in jar .........: ${enable_lib_in_jar}")
984 message(" Compile Java ................: NO")
986 message(" Compile Lua .................: ${HAVE_LUA}")
987 message(" Compile Smpi ................: ${HAVE_SMPI}")
988 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
989 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
990 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
991 message(" PAPI support...............: ${HAVE_PAPI}")
992 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
994 message(" Maintainer mode .............: ${enable_maintainer_mode}")
995 message(" Documentation................: ${enable_documentation}")
996 message(" Model checking ..............: ${HAVE_MC}")
997 message(" Jedule mode ................: ${HAVE_JEDULE}")
998 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
999 message(" Mallocators .................: ${enable_mallocators}")
1001 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
1004 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
1005 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
1006 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")