4 # Doxyfile 1.3.6-20040222
6 # This file describes the settings to be used by the documentation system
7 # doxygen (www.doxygen.org) for a project
9 # All text after a hash (#) is considered a comment and will be ignored
11 # TAG = value [value, ...]
12 # For lists items can also be appended using:
13 # TAG += value [value, ...]
14 # Values that contain spaces should be placed between quotes (" ")
16 #---------------------------------------------------------------------------
17 # Project related configuration options
18 #---------------------------------------------------------------------------
20 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
21 # by quotes) that should identify the project.
23 PROJECT_NAME = SimGrid
25 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
26 # This could be handy for archiving the generated documentation or
27 # if some version control system is used.
31 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
32 # base path where the generated documentation will be put.
33 # If a relative path is entered, it will be relative to the location
34 # where doxygen was started. If left blank the current directory will be used.
38 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
39 # documentation generated by doxygen is written. Doxygen will use this
40 # information to generate all constant output in the proper language.
41 # The default language is English, other supported languages are:
42 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch,
43 # Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en
44 # (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese,
45 # Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
47 OUTPUT_LANGUAGE = English
49 # This tag can be used to specify the encoding used in the generated output.
50 # The encoding is not always determined by the language that is chosen,
51 # but also whether or not the output is meant for Windows or non-Windows users.
52 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
53 # forces the Windows encoding (this is the default for the Windows binary),
54 # whereas setting the tag to NO uses a Unix-style encoding (the default for
55 # all platforms other than Windows).
57 USE_WINDOWS_ENCODING = NO
59 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
60 # include brief member descriptions after the members that are listed in
61 # the file and class documentation (similar to JavaDoc).
62 # Set to NO to disable this.
64 BRIEF_MEMBER_DESC = YES
66 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
67 # the brief description of a member or function before the detailed description.
68 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
69 # brief descriptions will be completely suppressed.
73 # This tag implements a quasi-intelligent brief description abbreviator
74 # that is used to form the text in various listings. Each string
75 # in this list, if found as the leading text of the brief description, will be
76 # stripped from the text and the result after processing the whole list, is used
77 # as the annotated text. Otherwise, the brief description is used as-is. If left
78 # blank, the following values are used ("$name" is automatically replaced with the
79 # name of the entity): "The $name class" "The $name widget" "The $name file"
80 # "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
84 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
85 # Doxygen will generate a detailed section even if there is only a brief
88 ALWAYS_DETAILED_SEC = NO
90 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
91 # members of a class in the documentation of that class as if those members were
92 # ordinary class members. Constructors, destructors and assignment operators of
93 # the base classes will not be shown.
95 INLINE_INHERITED_MEMB = YES
97 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
98 # path before files name in the file list and in the header files. If set
99 # to NO the shortest path that makes the file name unique will be used.
101 FULL_PATH_NAMES = YES
103 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
104 # can be used to strip a user-defined part of the path. Stripping is
105 # only done if one of the specified strings matches the left-hand part of
106 # the path. It is allowed to use relative paths in the argument list.
107 # If left blank the directory from which doxygen is run is used as the
110 STRIP_FROM_PATH = @srcdir@
112 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
113 # (but less readable) file names. This can be useful is your file systems
114 # doesn't support long names like on DOS, Mac, or CD-ROM.
118 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
119 # will interpret the first line (until the first dot) of a JavaDoc-style
120 # comment as the brief description. If set to NO, the JavaDoc
121 # comments will behave just like the Qt-style comments (thus requiring an
122 # explicit @brief command for a brief description.
124 JAVADOC_AUTOBRIEF = NO
126 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
127 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
128 # comments) as a brief description. This used to be the default behaviour.
129 # The new default is to treat a multi-line C++ comment block as a detailed
130 # description. Set this tag to YES if you prefer the old behaviour instead.
132 MULTILINE_CPP_IS_BRIEF = NO
134 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
135 # will output the detailed description near the top, like JavaDoc.
136 # If set to NO, the detailed description appears after the member
141 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
142 # member inherits the documentation from any documented member that it
147 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
148 # tag is set to YES, then doxygen will reuse the documentation of the first
149 # member in the group (if any) for the other members of the group. By default
150 # all members of a group must be documented explicitly.
152 DISTRIBUTE_GROUP_DOC = NO
154 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
155 # Doxygen uses this value to replace tabs by spaces in code fragments.
159 # This tag can be used to specify a number of aliases that acts
160 # as commands in the documentation. An alias has the form "name=value".
161 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
162 # put the command \sideeffect (or @sideeffect) in the documentation, which
163 # will result in a user-defined paragraph with heading "Side Effects:".
164 # You can put \n's in the value part of an alias to insert newlines.
168 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
169 # only. Doxygen will then generate output that is more tailored for C.
170 # For instance, some of the names that are used will be different. The list
171 # of all members will be omitted, etc.
173 OPTIMIZE_OUTPUT_FOR_C = YES
175 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
176 # only. Doxygen will then generate output that is more tailored for Java.
177 # For instance, namespaces will be presented as packages, qualified scopes
178 # will look different, etc.
180 OPTIMIZE_OUTPUT_JAVA = NO
182 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
183 # the same type (for instance a group of public functions) to be put as a
184 # subgroup of that type (e.g. under the Public Functions section). Set it to
185 # NO to prevent subgrouping. Alternatively, this can be done per class using
186 # the \nosubgrouping command.
190 #---------------------------------------------------------------------------
191 # Build related configuration options
192 #---------------------------------------------------------------------------
194 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
195 # documentation are documented, even if no documentation was available.
196 # Private class members and static file members will be hidden unless
197 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
201 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
202 # will be included in the documentation.
206 # If the EXTRACT_STATIC tag is set to YES all static members of a file
207 # will be included in the documentation.
211 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
212 # defined locally in source files will be included in the documentation.
213 # If set to NO only classes defined in header files are included.
215 EXTRACT_LOCAL_CLASSES = YES
217 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
218 # undocumented members of documented classes, files or namespaces.
219 # If set to NO (the default) these members will be included in the
220 # various overviews, but no documentation section is generated.
221 # This option has no effect if EXTRACT_ALL is enabled.
223 HIDE_UNDOC_MEMBERS = YES
225 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
226 # undocumented classes that are normally visible in the class hierarchy.
227 # If set to NO (the default) these classes will be included in the various
228 # overviews. This option has no effect if EXTRACT_ALL is enabled.
230 HIDE_UNDOC_CLASSES = YES
232 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
233 # friend (class|struct|union) declarations.
234 # If set to NO (the default) these declarations will be included in the
237 HIDE_FRIEND_COMPOUNDS = NO
239 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
240 # documentation blocks found inside the body of a function.
241 # If set to NO (the default) these blocks will be appended to the
242 # function's detailed documentation block.
244 HIDE_IN_BODY_DOCS = NO
246 # The INTERNAL_DOCS tag determines if documentation
247 # that is typed after a \internal command is included. If the tag is set
248 # to NO (the default) then the documentation will be excluded.
249 # Set it to YES to include the internal documentation.
253 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
254 # file names in lower-case letters. If set to YES upper-case letters are also
255 # allowed. This is useful if you have classes or files whose names only differ
256 # in case and if your file system supports case sensitive file names. Windows
257 # users are advised to set this option to NO.
259 CASE_SENSE_NAMES = YES
261 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
262 # will show members with their full class and namespace scopes in the
263 # documentation. If set to YES the scope will be hidden.
265 HIDE_SCOPE_NAMES = NO
267 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
268 # will put a list of the files that are included by a file in the documentation
271 SHOW_INCLUDE_FILES = YES
273 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
274 # is inserted in the documentation for inline members.
278 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
279 # will sort the (detailed) documentation of file and class members
280 # alphabetically by member name. If set to NO the members will appear in
283 SORT_MEMBER_DOCS = NO
285 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
286 # brief documentation of file, namespace and class members alphabetically
287 # by member name. If set to NO (the default) the members will appear in
292 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
293 # sorted by fully-qualified names, including namespaces. If set to
294 # NO (the default), the class list will be sorted only by class name,
295 # not including the namespace part.
296 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
297 # Note: This option applies only to the class list, not to the
300 SORT_BY_SCOPE_NAME = NO
302 # The GENERATE_TODOLIST tag can be used to enable (YES) or
303 # disable (NO) the todo list. This list is created by putting \todo
304 # commands in the documentation.
306 GENERATE_TODOLIST = YES
308 # The GENERATE_TESTLIST tag can be used to enable (YES) or
309 # disable (NO) the test list. This list is created by putting \test
310 # commands in the documentation.
312 GENERATE_TESTLIST = YES
314 # The GENERATE_BUGLIST tag can be used to enable (YES) or
315 # disable (NO) the bug list. This list is created by putting \bug
316 # commands in the documentation.
318 GENERATE_BUGLIST = YES
320 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
321 # disable (NO) the deprecated list. This list is created by putting
322 # \deprecated commands in the documentation.
324 GENERATE_DEPRECATEDLIST= YES
326 # The ENABLED_SECTIONS tag can be used to enable conditional
327 # documentation sections, marked by \if sectionname ... \endif.
331 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
332 # the initial value of a variable or define consists of for it to appear in
333 # the documentation. If the initializer consists of more lines than specified
334 # here it will be hidden. Use a value of 0 to hide initializers completely.
335 # The appearance of the initializer of individual variables and defines in the
336 # documentation can be controlled using \showinitializer or \hideinitializer
337 # command in the documentation regardless of this setting.
339 MAX_INITIALIZER_LINES = 30
341 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
342 # at the bottom of the documentation of classes and structs. If set to YES the
343 # list will mention the files that were used to generate the documentation.
345 SHOW_USED_FILES = YES
347 #---------------------------------------------------------------------------
348 # configuration options related to warning and progress messages
349 #---------------------------------------------------------------------------
351 # The QUIET tag can be used to turn on/off the messages that are generated
352 # by doxygen. Possible values are YES and NO. If left blank NO is used.
356 # The WARNINGS tag can be used to turn on/off the warning messages that are
357 # generated by doxygen. Possible values are YES and NO. If left blank
362 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
363 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
364 # automatically be disabled.
366 WARN_IF_UNDOCUMENTED = YES
368 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
369 # potential errors in the documentation, such as not documenting some
370 # parameters in a documented function, or documenting parameters that
371 # don't exist or using markup commands wrongly.
373 WARN_IF_DOC_ERROR = YES
375 # The WARN_FORMAT tag determines the format of the warning messages that
376 # doxygen can produce. The string should contain the $file, $line, and $text
377 # tags, which will be replaced by the file and line number from which the
378 # warning originated and the warning text.
380 WARN_FORMAT = "$file:$line: $text"
382 # The WARN_LOGFILE tag can be used to specify a file to which warning
383 # and error messages should be written. If left blank the output is written
388 #---------------------------------------------------------------------------
389 # configuration options related to the input files
390 #---------------------------------------------------------------------------
392 # The INPUT tag can be used to specify the files and/or directories that contain
393 # documented source files. You may enter file names like "myfile.cpp" or
394 # directories like "/usr/src/myproject". Separate the files or directories
397 INPUT = @srcdir@/index.doc \
399 @srcdir@/contrib.doc \
400 @srcdir@/publis.doc \
403 @srcdir@/modules.doc \
404 @srcdir@/module-xbt.doc \
405 @srcdir@/module-msg.doc \
406 @srcdir@/module-gras.doc @srcdir@/module-amok.doc \
407 @srcdir@/module-sd.doc \
408 @srcdir@/module-surf.doc \
410 @srcdir@/gtut-main.doc \
411 @srcdir@/gtut-introduction.doc \
412 @srcdir@/gtut-tour.doc \
413 @srcdir@/gtut-tour-01-bones.doc \
414 @srcdir@/gtut-tour-02-simple.doc \
415 @srcdir@/gtut-tour-03-args.doc \
416 @srcdir@/gtut-tour-04-callback.doc \
417 @srcdir@/gtut-tour-05-globals.doc \
418 @srcdir@/gtut-tour-06-logs.doc \
419 @srcdir@/gtut-tour-07-timers.doc \
420 @srcdir@/gtut-tour-08-exceptions.doc \
421 @srcdir@/gtut-tour-09-simpledata.doc \
422 @srcdir@/gtut-tour-10-rpc.doc \
423 @srcdir@/gtut-tour-11-explicitwait.doc \
424 @srcdir@/gtut-tour-recap-messages.doc \
425 @srcdir@/gtut-tour-12-staticstruct.doc \
426 @srcdir@/gtut-tour-13-pointers.doc \
427 @srcdir@/gtut-tour-14-dynar.doc \
428 @srcdir@/gtut-tour-15-manualdatadef.doc \
429 @srcdir@/gtut-tour-16-exchangecb.doc \
430 @srcdir@/gtut-howto.doc \
431 @srcdir@/gtut-howto-design.doc \
433 ./logcategories.doc \
435 @top_srcdir@/include/ \
436 @top_srcdir@/include/msg \
437 @top_srcdir@/include/gras \
438 @top_srcdir@/include/amok \
439 @top_srcdir@/include/xbt \
440 @top_srcdir@/include/simdag \
441 @top_srcdir@/src/include/surf \
442 @top_srcdir@/src/xbt/ \
443 @top_srcdir@/src/surf/ \
444 @top_srcdir@/src/msg/ \
445 @top_srcdir@/src/gras \
446 @top_srcdir@/src/gras/DataDesc \
447 @top_srcdir@/src/gras/Msg \
448 @top_srcdir@/src/gras/Transport \
449 @top_srcdir@/src/gras/Virtu \
450 @top_srcdir@/src/amok \
451 @top_srcdir@/src/amok/Bandwidth \
452 @top_srcdir@/src/amok/PeerManagement \
453 @top_srcdir@/src/simdag
455 # If the value of the INPUT tag contains directories, you can use the
456 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
457 # and *.h) to filter out the source-files in the directories. If left
458 # blank the following patterns are tested:
459 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
460 # *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
464 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
465 # should be searched for input files as well. Possible values are YES and NO.
466 # If left blank NO is used.
470 # The EXCLUDE tag can be used to specify files and/or directories that should
471 # excluded from the INPUT source files. This way you can easily exclude a
472 # subdirectory from a directory tree whose root is specified with the INPUT tag.
476 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
477 # that are symbolic links (a Unix filesystem feature) are excluded from the input.
479 EXCLUDE_SYMLINKS = NO
481 # If the value of the INPUT tag contains directories, you can use the
482 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
483 # certain files from those directories.
487 # The EXAMPLE_PATH tag can be used to specify one or more files or
488 # directories that contain example code fragments that are included (see
489 # the \include command).
492 @top_srcdir@/doc/gtut-files \
493 @top_srcdir@/src/surf/ \
494 @top_srcdir@/src/xbt/ \
495 @top_srcdir@/examples \
496 @top_srcdir@/testsuite
498 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
499 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
500 # and *.h) to filter out the source-files in the directories. If left
501 # blank all files are included.
505 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
506 # searched for input files to be used with the \include or \dontinclude
507 # commands irrespective of the value of the RECURSIVE tag.
508 # Possible values are YES and NO. If left blank NO is used.
510 EXAMPLE_RECURSIVE = YES
512 # The IMAGE_PATH tag can be used to specify one or more files or
513 # directories that contain image that are included in the documentation (see
514 # the \image command).
516 IMAGE_PATH = @top_srcdir@/doc
518 # The INPUT_FILTER tag can be used to specify a program that doxygen should
519 # invoke to filter for each input file. Doxygen will invoke the filter program
520 # by executing (via popen()) the command <filter> <input-file>, where <filter>
521 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
522 # input file. Doxygen will then use the output that the filter program writes
523 # to standard output.
527 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
528 # INPUT_FILTER) will be used to filter the input files when producing source
529 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
531 FILTER_SOURCE_FILES = NO
533 #---------------------------------------------------------------------------
534 # configuration options related to source browsing
535 #---------------------------------------------------------------------------
537 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
538 # be generated. Documented entities will be cross-referenced with these sources.
539 # Note: To get rid of all source code in the generated output, make sure also
540 # VERBATIM_HEADERS is set to NO.
544 # Setting the INLINE_SOURCES tag to YES will include the body
545 # of functions and classes directly in the documentation.
549 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
550 # doxygen to hide any special comment blocks from generated source code
551 # fragments. Normal C and C++ comments will always remain visible.
553 STRIP_CODE_COMMENTS = YES
555 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
556 # then for each documented function all documented
557 # functions referencing it will be listed.
559 REFERENCED_BY_RELATION = NO
561 # If the REFERENCES_RELATION tag is set to YES (the default)
562 # then for each documented function all documented entities
563 # called/used by that function will be listed.
565 REFERENCES_RELATION = NO
567 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
568 # will generate a verbatim copy of the header file for each class for
569 # which an include is specified. Set to NO to disable this.
571 VERBATIM_HEADERS = NO
573 #---------------------------------------------------------------------------
574 # configuration options related to the alphabetical class index
575 #---------------------------------------------------------------------------
577 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
578 # of all compounds will be generated. Enable this if the project
579 # contains a lot of classes, structs, unions or interfaces.
581 ALPHABETICAL_INDEX = NO
583 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
584 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
585 # in which this list will be split (can be a number in the range [1..20])
587 COLS_IN_ALPHA_INDEX = 5
589 # In case all classes in a project start with a common prefix, all
590 # classes will be put under the same header in the alphabetical index.
591 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
592 # should be ignored while generating the index headers.
596 #---------------------------------------------------------------------------
597 # configuration options related to the HTML output
598 #---------------------------------------------------------------------------
600 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
601 # generate HTML output.
605 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
606 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
607 # put in front of it. If left blank `html' will be used as the default path.
611 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
612 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
613 # doxygen will generate files with .html extension.
615 HTML_FILE_EXTENSION = .html
617 # The HTML_HEADER tag can be used to specify a personal HTML header for
618 # each generated HTML page. If it is left blank doxygen will generate a
623 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
624 # each generated HTML page. If it is left blank doxygen will generate a
627 HTML_FOOTER = @srcdir@/footer.html
629 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
630 # style sheet that is used by each HTML page. It can be used to
631 # fine-tune the look of the HTML output. If the tag is left blank doxygen
632 # will generate a default style sheet. Note that doxygen will try to copy
633 # the style sheet file to the HTML output directory, so don't put your own
634 # stylesheet in the HTML output directory as well, or it will be erased!
638 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
639 # files or namespaces will be aligned in HTML using tables. If set to
640 # NO a bullet list will be used.
642 HTML_ALIGN_MEMBERS = YES
644 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
645 # will be generated that can be used as input for tools like the
646 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
647 # of the generated HTML documentation.
649 GENERATE_HTMLHELP = NO
651 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
652 # be used to specify the file name of the resulting .chm file. You
653 # can add a path in front of the file if the result should not be
654 # written to the html output directory.
658 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
659 # be used to specify the location (absolute path including file name) of
660 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
661 # the HTML help compiler on the generated index.hhp.
665 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
666 # controls if a separate .chi index file is generated (YES) or that
667 # it should be included in the master .chm file (NO).
671 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
672 # controls whether a binary table of contents is generated (YES) or a
673 # normal table of contents (NO) in the .chm file.
677 # The TOC_EXPAND flag can be set to YES to add extra items for group members
678 # to the contents of the HTML help documentation and to the tree view.
682 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
683 # top of each HTML page. The value NO (the default) enables the index and
684 # the value YES disables it.
688 # This tag can be used to set the number of enum values (range [1..20])
689 # that doxygen will group on one line in the generated HTML documentation.
691 ENUM_VALUES_PER_LINE = 4
693 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
694 # generated containing a tree-like index structure (just like the one that
695 # is generated for HTML Help). For this to work a browser that supports
696 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
697 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
698 # probably better off using the HTML help feature.
700 GENERATE_TREEVIEW = NO
702 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
703 # used to set the initial width (in pixels) of the frame in which the tree
708 #---------------------------------------------------------------------------
709 # configuration options related to the LaTeX output
710 #---------------------------------------------------------------------------
712 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
713 # generate Latex output.
717 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
718 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
719 # put in front of it. If left blank `latex' will be used as the default path.
723 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
724 # invoked. If left blank `latex' will be used as the default command name.
726 LATEX_CMD_NAME = latex
728 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
729 # generate index for LaTeX. If left blank `makeindex' will be used as the
730 # default command name.
732 MAKEINDEX_CMD_NAME = makeindex
734 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
735 # LaTeX documents. This may be useful for small projects and may help to
736 # save some trees in general.
740 # The PAPER_TYPE tag can be used to set the paper type that is used
741 # by the printer. Possible values are: a4, a4wide, letter, legal and
742 # executive. If left blank a4wide will be used.
746 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
747 # packages that should be included in the LaTeX output.
751 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
752 # the generated latex document. The header should contain everything until
753 # the first chapter. If it is left blank doxygen will generate a
754 # standard header. Notice: only use this tag if you know what you are doing!
758 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
759 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
760 # contain links (just like the HTML output) instead of page references
761 # This makes the output suitable for online browsing using a pdf viewer.
765 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
766 # plain latex in the generated Makefile. Set this option to YES to get a
767 # higher quality PDF documentation.
771 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
772 # command to the generated LaTeX files. This will instruct LaTeX to keep
773 # running if errors occur, instead of asking the user for help.
774 # This option is also used when generating formulas in HTML.
778 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
779 # include the index chapters (such as File Index, Compound Index, etc.)
782 LATEX_HIDE_INDICES = NO
784 #---------------------------------------------------------------------------
785 # configuration options related to the RTF output
786 #---------------------------------------------------------------------------
788 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
789 # The RTF output is optimized for Word 97 and may not look very pretty with
790 # other RTF readers or editors.
794 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
795 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
796 # put in front of it. If left blank `rtf' will be used as the default path.
800 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
801 # RTF documents. This may be useful for small projects and may help to
802 # save some trees in general.
806 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
807 # will contain hyperlink fields. The RTF file will
808 # contain links (just like the HTML output) instead of page references.
809 # This makes the output suitable for online browsing using WORD or other
810 # programs which support those fields.
811 # Note: wordpad (write) and others do not support links.
815 # Load stylesheet definitions from file. Syntax is similar to doxygen's
816 # config file, i.e. a series of assignments. You only have to provide
817 # replacements, missing definitions are set to their default value.
819 RTF_STYLESHEET_FILE =
821 # Set optional variables used in the generation of an rtf document.
822 # Syntax is similar to doxygen's config file.
824 RTF_EXTENSIONS_FILE =
826 #---------------------------------------------------------------------------
827 # configuration options related to the man page output
828 #---------------------------------------------------------------------------
830 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
835 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
836 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
837 # put in front of it. If left blank `man' will be used as the default path.
841 # The MAN_EXTENSION tag determines the extension that is added to
842 # the generated man pages (default is the subroutine's section .3)
846 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
847 # then it will generate one additional man file for each entity
848 # documented in the real man page(s). These additional files
849 # only source the real man page, but without them the man command
850 # would be unable to find the correct page. The default is NO.
854 #---------------------------------------------------------------------------
855 # configuration options related to the XML output
856 #---------------------------------------------------------------------------
858 # If the GENERATE_XML tag is set to YES Doxygen will
859 # generate an XML file that captures the structure of
860 # the code including all documentation.
864 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
865 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
866 # put in front of it. If left blank `xml' will be used as the default path.
870 # The XML_SCHEMA tag can be used to specify an XML schema,
871 # which can be used by a validating XML parser to check the
872 # syntax of the XML files.
876 # The XML_DTD tag can be used to specify an XML DTD,
877 # which can be used by a validating XML parser to check the
878 # syntax of the XML files.
882 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
883 # dump the program listings (including syntax highlighting
884 # and cross-referencing information) to the XML output. Note that
885 # enabling this will significantly increase the size of the XML output.
887 XML_PROGRAMLISTING = YES
889 #---------------------------------------------------------------------------
890 # configuration options for the AutoGen Definitions output
891 #---------------------------------------------------------------------------
893 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
894 # generate an AutoGen Definitions (see autogen.sf.net) file
895 # that captures the structure of the code including all
896 # documentation. Note that this feature is still experimental
897 # and incomplete at the moment.
899 GENERATE_AUTOGEN_DEF = NO
901 #---------------------------------------------------------------------------
902 # configuration options related to the Perl module output
903 #---------------------------------------------------------------------------
905 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
906 # generate a Perl module file that captures the structure of
907 # the code including all documentation. Note that this
908 # feature is still experimental and incomplete at the
911 GENERATE_PERLMOD = NO
913 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
914 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
915 # to generate PDF and DVI output from the Perl module output.
919 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
920 # nicely formatted so it can be parsed by a human reader. This is useful
921 # if you want to understand what is going on. On the other hand, if this
922 # tag is set to NO the size of the Perl module output will be much smaller
923 # and Perl will parse it just the same.
927 # The names of the make variables in the generated doxyrules.make file
928 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
929 # This is useful so different doxyrules.make files included by the same
930 # Makefile don't overwrite each other's variables.
932 PERLMOD_MAKEVAR_PREFIX =
934 #---------------------------------------------------------------------------
935 # Configuration options related to the preprocessor
936 #---------------------------------------------------------------------------
938 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
939 # evaluate all C-preprocessor directives found in the sources and include
942 ENABLE_PREPROCESSING = YES
944 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
945 # names in the source code. If set to NO (the default) only conditional
946 # compilation will be performed. Macro expansion can be done in a controlled
947 # way by setting EXPAND_ONLY_PREDEF to YES.
949 MACRO_EXPANSION = YES
951 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
952 # then the macro expansion is limited to the macros specified with the
953 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
955 EXPAND_ONLY_PREDEF = YES
957 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
958 # in the INCLUDE_PATH (see below) will be search if a #include is found.
960 SEARCH_INCLUDES = YES
962 # The INCLUDE_PATH tag can be used to specify one or more directories that
963 # contain include files that are not input files but should be processed by
968 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
969 # patterns (like *.h and *.hpp) to filter out the header-files in the
970 # directories. If left blank, the patterns specified with FILE_PATTERNS will
973 INCLUDE_FILE_PATTERNS =
975 # The PREDEFINED tag can be used to specify one or more macro names that
976 # are defined before the preprocessor is started (similar to the -D option of
977 # gcc). The argument of the tag is a list of macros of the form: name
978 # or name=definition (no spaces). If the definition and the = are
979 # omitted =1 is assumed.
981 PREDEFINED = DOXYGEN DOXYGEN_SKIP_IT XBT_PUBLIC=
983 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
984 # this tag can be used to specify a list of macro names that should be expanded.
985 # The macro definition that is found in the sources will be used.
986 # Use the PREDEFINED tag if you want to use a different macro definition.
990 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
991 # doxygen's preprocessor will remove all function-like macros that are alone
992 # on a line, have an all uppercase name, and do not end with a semicolon. Such
993 # function macros are typically used for boiler-plate code, and will confuse the
994 # parser if not removed.
996 SKIP_FUNCTION_MACROS = YES
998 #---------------------------------------------------------------------------
999 # Configuration::additions related to external references
1000 #---------------------------------------------------------------------------
1002 # The TAGFILES option can be used to specify one or more tagfiles.
1003 # Optionally an initial location of the external documentation
1004 # can be added for each tagfile. The format of a tag file without
1005 # this location is as follows:
1006 # TAGFILES = file1 file2 ...
1007 # Adding location for the tag files is done as follows:
1008 # TAGFILES = file1=loc1 "file2 = loc2" ...
1009 # where "loc1" and "loc2" can be relative or absolute paths or
1010 # URLs. If a location is present for each tag, the installdox tool
1011 # does not have to be run to correct the links.
1012 # Note that each tag file must have a unique name
1013 # (where the name does NOT include the path)
1014 # If a tag file is not located in the directory in which doxygen
1015 # is run, you must also specify the path to the tagfile here.
1019 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1020 # a tag file that is based on the input files it reads.
1022 GENERATE_TAGFILE = simgrid.tag
1024 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1025 # in the class index. If set to NO only the inherited external classes
1030 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1031 # in the modules index. If set to NO, only the current project's groups will
1034 EXTERNAL_GROUPS = NO
1036 # The PERL_PATH should be the absolute path and name of the perl script
1037 # interpreter (i.e. the result of `which perl').
1039 PERL_PATH = /usr/bin/perl
1041 #---------------------------------------------------------------------------
1042 # Configuration options related to the dot tool
1043 #---------------------------------------------------------------------------
1045 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1046 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
1047 # super classes. Setting the tag to NO turns the diagrams off. Note that this
1048 # option is superseded by the HAVE_DOT option below. This is only a fallback. It is
1049 # recommended to install and use dot, since it yields more powerful graphs.
1051 CLASS_DIAGRAMS = YES
1053 # If set to YES, the inheritance and collaboration graphs will hide
1054 # inheritance and usage relations if the target is undocumented
1055 # or is not a class.
1057 HIDE_UNDOC_RELATIONS = YES
1059 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1060 # available from the path. This tool is part of Graphviz, a graph visualization
1061 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1062 # have no effect if this option is set to NO (the default)
1066 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1067 # will generate a graph for each documented class showing the direct and
1068 # indirect inheritance relations. Setting this tag to YES will force the
1069 # the CLASS_DIAGRAMS tag to NO.
1073 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1074 # will generate a graph for each documented class showing the direct and
1075 # indirect implementation dependencies (inheritance, containment, and
1076 # class references variables) of the class with other documented classes.
1078 COLLABORATION_GRAPH = YES
1080 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1081 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1086 # If set to YES, the inheritance and collaboration graphs will show the
1087 # relations between templates and their instances.
1089 TEMPLATE_RELATIONS = YES
1091 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1092 # tags are set to YES then doxygen will generate a graph for each documented
1093 # file showing the direct and indirect include dependencies of the file with
1094 # other documented files.
1098 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1099 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1100 # documented header file showing the documented files that directly or
1101 # indirectly include this file.
1103 INCLUDED_BY_GRAPH = YES
1105 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1106 # generate a call dependency graph for every global function or class method.
1107 # Note that enabling this option will significantly increase the time of a run.
1108 # So in most cases it will be better to enable call graphs for selected
1109 # functions only using the \callgraph command.
1113 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1114 # will graphical hierarchy of all classes instead of a textual one.
1116 GRAPHICAL_HIERARCHY = YES
1118 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1119 # generated by dot. Possible values are png, jpg, or gif
1120 # If left blank png will be used.
1122 DOT_IMAGE_FORMAT = png
1124 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1125 # found. If left blank, it is assumed the dot tool can be found on the path.
1129 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1130 # contain dot files that are included in the documentation (see the
1131 # \dotfile command).
1135 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1136 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1137 # this value, doxygen will try to truncate the graph, so that it fits within
1138 # the specified constraint. Beware that most browsers cannot cope with very
1141 MAX_DOT_GRAPH_WIDTH = 1024
1143 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1144 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1145 # this value, doxygen will try to truncate the graph, so that it fits within
1146 # the specified constraint. Beware that most browsers cannot cope with very
1149 MAX_DOT_GRAPH_HEIGHT = 1024
1151 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1152 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1153 # from the root by following a path via at most 3 edges will be shown. Nodes that
1154 # lay further from the root node will be omitted. Note that setting this option to
1155 # 1 or 2 may greatly reduce the computation time needed for large code bases. Also
1156 # note that a graph may be further truncated if the graph's image dimensions are
1157 # not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
1158 # If 0 is used for the depth value (the default), the graph is not depth-constrained.
1160 MAX_DOT_GRAPH_DEPTH = 0
1162 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1163 # generate a legend page explaining the meaning of the various boxes and
1164 # arrows in the dot generated graphs.
1166 GENERATE_LEGEND = YES
1168 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1169 # remove the intermediate dot files that are used to generate
1170 # the various graphs.
1174 #---------------------------------------------------------------------------
1175 # Configuration::additions related to the search engine
1176 #---------------------------------------------------------------------------
1178 # The SEARCHENGINE tag specifies whether or not a search engine should be
1179 # used. If set to NO the values of all tags below this one will be ignored.