fezlkjfldsjk

[GMRES2stage.git] / paper.tex

%% bare_conf.tex
%% V1.3
%% 2007/01/11
%% by Michael Shell
%% See:
%% http://www.michaelshell.org/
%% for current contact information.
%%
%% This is a skeleton file demonstrating the use of IEEEtran.cls
%% (requires IEEEtran.cls version 1.7 or later) with an IEEE conference paper.
%%
%% Support sites:
%% http://www.michaelshell.org/tex/ieeetran/
%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
%% and
%% http://www.ieee.org/

%%*************************************************************************
%% Legal Notice:
%% This code is offered as-is without any warranty either expressed or
%% implied; without even the implied warranty of MERCHANTABILITY or
%% FITNESS FOR A PARTICULAR PURPOSE! 
%% User assumes all risk.
%% In no event shall IEEE or any contributor to this code be liable for
%% any damages or losses, including, but not limited to, incidental,
%% consequential, or any other damages, resulting from the use or misuse
%% of any information contained here.
%%
%% All comments are the opinions of their respective authors and are not
%% necessarily endorsed by the IEEE.
%%
%% This work is distributed under the LaTeX Project Public License (LPPL)
%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
%% distributed and modified. A copy of the LPPL, version 1.3, is included
%% in the base LaTeX documentation of all distributions of LaTeX released
%% 2003/12/01 or later.
%% Retain all contribution notices and credits.
%% ** Modified files should be clearly indicated as such, including  **
%% ** renaming them and changing author support contact information. **
%%
%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
%%                    bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
%%*************************************************************************

% *** Authors should verify (and, if needed, correct) their LaTeX system  ***
% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
% *** with production work. IEEE's font choices can trigger bugs that do  ***
% *** not appear when using other class files.                            ***
% The testflow support page is at:
% http://www.michaelshell.org/tex/testflow/



% Note that the a4paper option is mainly intended so that authors in
% countries using A4 can easily print to A4 and see how their papers will
% look in print - the typesetting of the document will not typically be
% affected with changes in paper size (but the bottom and side margins will).
% Use the testflow package mentioned above to verify correct handling of
% both paper sizes by the user's LaTeX system.
%
% Also note that the "draftcls" or "draftclsnofoot", not "draft", option
% should be used if it is desired that the figures are to be displayed in
% draft mode.
%
\documentclass[10pt, conference, compsocconf]{IEEEtran}
% Add the compsocconf option for Computer Society conferences.
%
% If IEEEtran.cls has not been installed into the LaTeX system files,
% manually specify the path to it like:
% \documentclass[conference]{../sty/IEEEtran}





% Some very useful LaTeX packages include:
% (uncomment the ones you want to load)


% *** MISC UTILITY PACKAGES ***
%
%\usepackage{ifpdf}
% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
% compilation based on whether the output is pdf or dvi.
% usage:
% \ifpdf
%   % pdf code
% \else
%   % dvi code
% \fi
% The latest version of ifpdf.sty can be obtained from:
% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/
% Also, note that IEEEtran.cls V1.7 and later provides a builtin
% \ifCLASSINFOpdf conditional that works the same way.
% When switching from latex to pdflatex and vice-versa, the compiler may
% have to be run twice to clear warning/error messages.






% *** CITATION PACKAGES ***
%
%\usepackage{cite}
% cite.sty was written by Donald Arseneau
% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
% \cite{} output to follow that of IEEE. Loading the cite package will
% result in citation numbers being automatically sorted and properly
% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
% \cite will automatically add leading space, if needed. Use cite.sty's
% noadjust option (cite.sty V3.8 and later) if you want to turn this off.
% cite.sty is already installed on most LaTeX systems. Be sure and use
% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does
% not currently provide for hyperlinked citations.
% The latest version can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/
% The documentation is contained in the cite.sty file itself.






% *** GRAPHICS RELATED PACKAGES ***
%
\ifCLASSINFOpdf
  % \usepackage[pdftex]{graphicx}
  % declare the path(s) where your graphic files are
  % \graphicspath{{../pdf/}{../jpeg/}}
  % and their extensions so you won't have to specify these with
  % every instance of \includegraphics
  % \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
\else
  % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
  % will default to the driver specified in the system graphics.cfg if no
  % driver is specified.
  % \usepackage[dvips]{graphicx}
  % declare the path(s) where your graphic files are
  % \graphicspath{{../eps/}}
  % and their extensions so you won't have to specify these with
  % every instance of \includegraphics
  % \DeclareGraphicsExtensions{.eps}
\fi
% graphicx was written by David Carlisle and Sebastian Rahtz. It is
% required if you want graphics, photos, etc. graphicx.sty is already
% installed on most LaTeX systems. The latest version and documentation can
% be obtained at: 
% http://www.ctan.org/tex-archive/macros/latex/required/graphics/
% Another good source of documentation is "Using Imported Graphics in
% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or
% epslatex.pdf at: http://www.ctan.org/tex-archive/info/
%
% latex, and pdflatex in dvi mode, support graphics in encapsulated
% postscript (.eps) format. pdflatex in pdf mode supports graphics
% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats
% which can result in "jaggedy"/blurry rendering of lines and letters as
% well as large increases in file sizes.
%
% You can find documentation about the pdfTeX application at:
% http://www.tug.org/applications/pdftex





% *** MATH PACKAGES ***
%
%\usepackage[cmex10]{amsmath}
% A popular package from the American Mathematical Society that provides
% many useful and powerful commands for dealing with mathematics. If using
% it, be sure to load this package with the cmex10 option to ensure that
% only type 1 fonts will utilized at all point sizes. Without this option,
% it is possible that some math symbols, particularly those within
% footnotes, will be rendered in bitmap form which will result in a
% document that can not be IEEE Xplore compliant!
%
% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000
% thus preventing page breaks from occurring within multiline equations. Use:
%\interdisplaylinepenalty=2500
% after loading amsmath to restore such page breaks as IEEEtran.cls normally
% does. amsmath.sty is already installed on most LaTeX systems. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/





% *** SPECIALIZED LIST PACKAGES ***
%
%\usepackage{algorithmic}
% algorithmic.sty was written by Peter Williams and Rogerio Brito.
% This package provides an algorithmic environment fo describing algorithms.
% You can use the algorithmic environment in-text or within a figure
% environment to provide for a floating algorithm. Do NOT use the algorithm
% floating environment provided by algorithm.sty (by the same authors) or
% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated
% algorithm float types and packages that provide these will not provide
% correct IEEE style captions. The latest version and documentation of
% algorithmic.sty can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/
% There is also a support site at:
% http://algorithms.berlios.de/index.html
% Also of interest may be the (relatively newer and more customizable)
% algorithmicx.sty package by Szasz Janos:
% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/




% *** ALIGNMENT PACKAGES ***
%
%\usepackage{array}
% Frank Mittelbach's and David Carlisle's array.sty patches and improves
% the standard LaTeX2e array and tabular environments to provide better
% appearance and additional user controls. As the default LaTeX2e table
% generation code is lacking to the point of almost being broken with
% respect to the quality of the end results, all users are strongly
% advised to use an enhanced (at the very least that provided by array.sty)
% set of table tools. array.sty is already installed on most systems. The
% latest version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/required/tools/


%\usepackage{mdwmath}
%\usepackage{mdwtab}
% Also highly recommended is Mark Wooding's extremely powerful MDW tools,
% especially mdwmath.sty and mdwtab.sty which are used to format equations
% and tables, respectively. The MDWtools set is already installed on most
% LaTeX systems. The lastest version and documentation is available at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/


% IEEEtran contains the IEEEeqnarray family of commands that can be used to
% generate multiline equations as well as matrices, tables, etc., of high
% quality.


\usepackage{eqparbox}
% Also of notable interest is Scott Pakin's eqparbox package for creating
% (automatically sized) equal width boxes - aka "natural width parboxes".
% Available at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/





% *** SUBFIGURE PACKAGES ***
%\usepackage[tight,footnotesize]{subfigure}
% subfigure.sty was written by Steven Douglas Cochran. This package makes it
% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE
% work, it is a good idea to load it with the tight package option to reduce
% the amount of white space around the subfigures. subfigure.sty is already
% installed on most LaTeX systems. The latest version and documentation can
% be obtained at:
% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/
% subfigure.sty has been superceeded by subfig.sty.



%\usepackage[caption=false]{caption}
%\usepackage[font=footnotesize]{subfig}
% subfig.sty, also written by Steven Douglas Cochran, is the modern
% replacement for subfigure.sty. However, subfig.sty requires and
% automatically loads Axel Sommerfeldt's caption.sty which will override
% IEEEtran.cls handling of captions and this will result in nonIEEE style
% figure/table captions. To prevent this problem, be sure and preload
% caption.sty with its "caption=false" package option. This is will preserve
% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later 
% (recommended due to many improvements over 1.2) of subfig.sty supports
% the caption=false option directly:
%\usepackage[caption=false,font=footnotesize]{subfig}
%
% The latest version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/
% The latest version and documentation of caption.sty can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/




% *** FLOAT PACKAGES ***
%
%\usepackage{fixltx2e}
% fixltx2e, the successor to the earlier fix2col.sty, was written by
% Frank Mittelbach and David Carlisle. This package corrects a few problems
% in the LaTeX2e kernel, the most notable of which is that in current
% LaTeX2e releases, the ordering of single and double column floats is not
% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
% single column figure to be placed prior to an earlier double column
% figure. The latest version and documentation can be found at:
% http://www.ctan.org/tex-archive/macros/latex/base/



%\usepackage{stfloats}
% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
% the ability to do double column floats at the bottom of the page as well
% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
% LaTeX2e). It also provides a command:
%\fnbelowfloat
% to enable the placement of footnotes below bottom floats (the standard
% LaTeX2e kernel puts them above bottom floats). This is an invasive package
% which rewrites many portions of the LaTeX2e float routines. It may not work
% with other packages that modify the LaTeX2e float routines. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/
% Documentation is contained in the stfloats.sty comments as well as in the
% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE
% does not allow \baselineskip to stretch. Authors submitting work to the
% IEEE should note that IEEE rarely uses double column equations and
% that authors should try to avoid such use. Do not be tempted to use the
% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does
% not format its papers in such ways.





% *** PDF, URL AND HYPERLINK PACKAGES ***
%
%\usepackage{url}
% url.sty was written by Donald Arseneau. It provides better support for
% handling and breaking URLs. url.sty is already installed on most LaTeX
% systems. The latest version can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/
% Read the url.sty source comments for usage information. Basically,
% \url{my_url_here}.





% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex).         ***
% There should be no need to do such things with IEEEtran.cls V1.6 and later.
% (Unless specifically asked to do so by the journal or conference you plan
% to submit to, of course. )


% correct bad hyphenation here
\hyphenation{op-tical net-works semi-conduc-tor}


\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{algorithm}
\usepackage{algpseudocode}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{multirow}
\usepackage{graphicx}

\algnewcommand\algorithmicinput{\textbf{Input:}}
\algnewcommand\Input{\item[\algorithmicinput]}

\algnewcommand\algorithmicoutput{\textbf{Output:}}
\algnewcommand\Output{\item[\algorithmicoutput]}

\newtheorem{proposition}{Proposition}

\begin{document}
%
% paper title
% can use linebreaks \\ within to get better formatting as desired
\title{TSIRM: A Two-Stage Iteration with least-squares Residual Minimization algorithm to solve large sparse linear systems}






% author names and affiliations
% use a multiple column layout for up to two different
% affiliations

\author{\IEEEauthorblockN{Rapha\"el Couturier\IEEEauthorrefmark{1}, Lilia Ziane Khodja\IEEEauthorrefmark{2}, and Christophe Guyeux\IEEEauthorrefmark{1}}
\IEEEauthorblockA{\IEEEauthorrefmark{1} Femto-ST Institute, University of Franche-Comt\'e, France\\
Email: \{raphael.couturier,christophe.guyeux\}@univ-fcomte.fr}
\IEEEauthorblockA{\IEEEauthorrefmark{2} INRIA Bordeaux Sud-Ouest, France\\
Email: lilia.ziane@inria.fr}
}



% conference papers do not typically use \thanks and this command
% is locked out in conference mode. If really needed, such as for
% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts
% after \documentclass

% for over three affiliations, or if they all won't fit within the width
% of the page, use this alternative format:
% 
%\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1},
%Homer Simpson\IEEEauthorrefmark{2},
%James Kirk\IEEEauthorrefmark{3}, 
%Montgomery Scott\IEEEauthorrefmark{3} and
%Eldon Tyrell\IEEEauthorrefmark{4}}
%\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\
%Georgia Institute of Technology,
%Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html}
%\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\
%Email: homer@thesimpsons.com}
%\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\
%Telephone: (800) 555--1212, Fax: (888) 555--1212}
%\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}}




% use for special paper notices
%\IEEEspecialpapernotice{(Invited Paper)}




% make the title area
\maketitle


\begin{abstract}
In  this article, a  two-stage iterative  algorithm is  proposed to  improve the
convergence  of  Krylov  based  iterative  methods,  typically  those  of  GMRES
variants.  The  principle of  the  proposed approach  is  to  build an  external
iteration over the  Krylov method, and to frequently  store its current residual
(at each GMRES restart for instance).  After a given number of outer iterations,
a least-squares minimization step is applied on the matrix composed by the saved
residuals, in order  to compute a better solution and to  make new iterations if
required.  It  is proven that the  proposal has the  same convergence properties
than the  inner embedded  method itself.  Experiments  using up to  16,394 cores
also  show that the  proposed algorithm  runs around  5 or  7 times  faster than
GMRES.
\end{abstract}

\begin{IEEEkeywords}
Iterative Krylov methods; sparse linear systems; two stage iteration; least-squares residual minimization; PETSc
\end{IEEEkeywords}


% For peer review papers, you can put extra information on the cover
% page as needed:
% \ifCLASSOPTIONpeerreview
% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
% \fi
%
% For peerreview papers, this IEEEtran command inserts a page break and
% creates the second title. It will be ignored for other modes.
\IEEEpeerreviewmaketitle




% An example of a floating figure using the graphicx package.
% Note that \label must occur AFTER (or within) \caption.
% For figures, \caption should occur after the \includegraphics.
% Note that IEEEtran v1.7 and later has special internal code that
% is designed to preserve the operation of \label within \caption
% even when the captionsoff option is in effect. However, because
% of issues like this, it may be the safest practice to put all your
% \label just after \caption rather than within \caption{}.
%
% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
% option should be used if it is desired that the figures are to be
% displayed while in draft mode.
%
%\begin{figure}[!t]
%\centering
%\includegraphics[width=2.5in]{myfigure}
% where an .eps filename suffix will be assumed under latex, 
% and a .pdf suffix will be assumed for pdflatex; or what has been declared
% via \DeclareGraphicsExtensions.
%\caption{Simulation Results}
%\label{fig_sim}
%\end{figure}

% Note that IEEE typically puts floats only at the top, even when this
% results in a large percentage of a column being occupied by floats.


% An example of a double column floating figure using two subfigures.
% (The subfig.sty package must be loaded for this to work.)
% The subfigure \label commands are set within each subfloat command, the
% \label for the overall figure must come after \caption.
% \hfil must be used as a separator to get equal spacing.
% The subfigure.sty package works much the same way, except \subfigure is
% used instead of \subfloat.
%
%\begin{figure*}[!t]
%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}%
%\label{fig_first_case}}
%\hfil
%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}%
%\label{fig_second_case}}}
%\caption{Simulation results}
%\label{fig_sim}
%\end{figure*}
%
% Note that often IEEE papers with subfigures do not employ subfigure
% captions (using the optional argument to \subfloat), but instead will
% reference/describe all of them (a), (b), etc., within the main caption.


% An example of a floating table. Note that, for IEEE style tables, the 
% \caption command should come BEFORE the table. Table text will default to
% \footnotesize as IEEE normally uses this smaller font for tables.
% The \label must come after \caption as always.
%
%\begin{table}[!t]
%% increase table row spacing, adjust to taste
%\renewcommand{\arraystretch}{1.3}
% if using array.sty, it might be a good idea to tweak the value of
% \extrarowheight as needed to properly center the text within the cells
%\caption{An Example of a Table}
%\label{table_example}
%\centering
%% Some packages, such as MDW tools, offer better commands for making tables
%% than the plain LaTeX2e tabular which is used here.
%\begin{tabular}{|c||c|}
%\hline
%One & Two\\
%\hline
%Three & Four\\
%\hline
%\end{tabular}
%\end{table}


% Note that IEEE does not put floats in the very first column - or typically
% anywhere on the first page for that matter. Also, in-text middle ("here")
% positioning is not used. Most IEEE journals/conferences use top floats
% exclusively. Note that, LaTeX2e, unlike IEEE journals/conferences, places
% footnotes above bottom floats. This can be corrected via the \fnbelowfloat
% command of the stfloats package.



%%%*********************************************************
%%%*********************************************************
\section{Introduction}
% no \IEEEPARstart
% You must have at least 2 lines in the paragraph with the drop letter
% (should never be an issue)

Iterative methods have recently become more attractive than direct ones to solve
very large sparse  linear systems\cite{Saad2003}.  They are more  efficient in a
parallel context,  supporting thousands of  cores, and they require  less memory
and  arithmetic operations than  direct methods~\cite{bahicontascoutu}.  This is
why new iterative methods are frequently proposed or adapted by researchers, and
the increasing need to solve very  large sparse linear systems has triggered the
development  of  such  efficient  iterative  techniques  suitable  for  parallel
processing.

Most  of the  successful  iterative  methods currently  available  are based  on
so-called ``Krylov  subspaces''. They consist  in forming a basis  of successive
matrix powers  multiplied by an  initial vector, which  can be for  instance the
residual. These methods  use vectors orthogonality of the  Krylov subspace basis
in  order to solve  linear systems.   The most  known iterative  Krylov subspace
methods are conjugate gradient and GMRES ones (Generalized Minimal RESidual).


However,  iterative  methods  suffer   from  scalability  problems  on  parallel
computing  platforms  with many  processors,  due  to  their need  of  reduction
operations,   and  to   collective  communications   to   achieve  matrix-vector
multiplications. The  communications on large  clusters with thousands  of cores
and large sizes  of messages can significantly affect  the performances of these
iterative methods. As a consequence, Krylov subspace iteration methods are often
used  with  preconditioners  in  practice,  to increase  their  convergence  and
accelerate their  performances.  However, most  of the good  preconditioners are
not scalable on large clusters.

In  this research work,  a two-stage  algorithm based  on two  nested iterations
called inner-outer  iterations is proposed.  This algorithm  consists in solving
the sparse  linear system iteratively with  a small number  of inner iterations,
and  restarting  the  outer step  with  a  new  solution minimizing  some  error
functions  over some previous  residuals. For  further information  on two-stage
iteration      methods,     interested      readers      are     invited      to
consult~\cite{Nichols:1973:CTS}. Two-stage algorithms are easy to parallelize on
large clusters.  Furthermore,  the least-squares minimization technique improves
its convergence and performances.

The present  article is  organized as follows.   Related works are  presented in
Section~\ref{sec:02}. Section~\ref{sec:03} details the two-stage algorithm using
a  least-squares  residual   minimization,  while  Section~\ref{sec:04}  provides
convergence  results  regarding this  method.   Section~\ref{sec:05} shows  some
experimental  results  obtained  on  large  clusters  using  routines  of  PETSc
toolkit. This research work ends by  a conclusion section, in which the proposal
is summarized while intended perspectives are provided.

%%%*********************************************************
%%%*********************************************************



%%%*********************************************************
%%%*********************************************************
\section{Related works}
\label{sec:02} 
Krylov subspace iteration methods have increasingly become key
techniques  for  solving  linear and nonlinear systems,  or  eigenvalue  problems,
especially      since       the      increasing      development       of      
preconditioners~\cite{Saad2003,Meijerink77}.  One reason  of  the popularity  of
these methods is their generality, simplicity, and efficiency to solve systems of
equations arising from very large and complex problems.

GMRES is one of the most  widely used Krylov iterative method for solving sparse
and large  linear systems. It  has been developed by  Saad \emph{et al.}~\cite{Saad86}  as a
generalized  method to  deal with  unsymmetric and  non-Hermitian  problems, and
indefinite symmetric problems too. In its original version called full GMRES, this algorithm
minimizes the residual over the  current Krylov subspace until convergence in at
most $n$ iterations,  where $n$ is the  size of the sparse matrix.  
Full GMRES is however too much expensive in the case of large matrices, since the
required orthogonalization  process per  iteration grows quadratically  with the
number of iterations. For that reason, GMRES is restarted in practice after each
$m\ll n$ iterations, to avoid the  storage of a large orthonormal basis. However,
the  convergence behavior  of the  restarted GMRES,  called GMRES($m$),  in many
cases depends quite critically on  the $m$ value~\cite{Huang89}. Therefore in
most cases, a preconditioning technique is applied to the restarted GMRES method
in order to improve its convergence.

To enhance the robustness of Krylov iterative solvers, some techniques have been proposed allowing the use of different preconditioners, if necessary, within the iteration instead of restarting. Those techniques may lead to considerable savings in CPU time and memory requirements. Van der Vorst in~\cite{Vorst94} has for instance proposed variants of the GMRES algorithm in which a different preconditioner is applied in each iteration, leading to the so-called GMRESR family of nested methods. In fact, the GMRES method is effectively preconditioned with other iterative schemes (or GMRES itself), where the iterations of the GMRES method are called outer iterations while the iterations of the preconditioning process is referred to as inner iterations. Saad in~\cite{Saad:1993} has proposed FGMRES which is another variant of the GMRES algorithm using a variable preconditioner. In FGMRES the search directions are preconditioned whereas in GMRESR the residuals are preconditioned. However, in practice, good preconditioners are those based on direct methods, as ILU preconditioners, which are not easy to parallelize and suffer from the scalability problems on large clusters of thousands of cores.  

Recently, communication-avoiding methods have been developed to reduce the communication overheads in Krylov subspace iterative solvers. On modern computer architectures, communications between processors are much slower than floating-point arithmetic operations on a given processor. Communication-avoiding techniques reduce either communications between processors or data movements between levels of the memory hierarchy, by reformulating the communication-bound kernels (more frequently SpMV kernels) and the orthogonalization operations within the Krylov iterative solver. Different works have studied the communication-avoiding techniques for the GMRES method, so-called CA-GMRES, on multicore processors and multi-GPU machines~\cite{Mohiyuddin2009,Hoemmen2010,Yamazaki2014}. 

Compared  to all these  works and  to all  the other  works on  Krylov iterative
method, the originality of our work is to build a second iteration over a Krylov
iterative method and to minimize the residuals with a least-squares method after
a given number of outer iterations.

%%%*********************************************************
%%%*********************************************************



%%%*********************************************************
%%%*********************************************************
\section{TSIRM: Two-stage iteration with least-squares residuals minimization algorithm}
\label{sec:03}
A two-stage algorithm is proposed  to solve large  sparse linear systems  of the
form  $Ax=b$,  where  $A\in\mathbb{R}^{n\times   n}$  is  a  sparse  and  square
nonsingular   matrix,   $x\in\mathbb{R}^n$    is   the   solution   vector,   and
$b\in\mathbb{R}^n$ is  the right-hand side.  As explained previously, 
the algorithm is implemented  as an
inner-outer iteration  solver based  on iterative Krylov  methods. The  main 
key-points of the proposed solver are given in Algorithm~\ref{algo:01}.
It can be summarized as follows: the
inner solver is a Krylov based one. In order to accelerate its convergence, the 
outer solver periodically applies a least-squares minimization  on the residuals computed by  the inner one. %Tsolver which does not required to be changed.

At each  outer iteration,  the sparse linear  system $Ax=b$ is  partially solved
using only $m$ iterations of  an iterative method, this latter being initialized
with the last obtained approximation.  GMRES method~\cite{Saad86}, or any of its
variants, can potentially be used  as inner solver. The current approximation of
the Krylov  method is then  stored inside  a $n \times  s$ matrix $S$,  which is
composed by  the $s$  last solutions  that have been  computed during  the inner
iterations phase.   In the remainder,  the $i$-th column  vector of $S$  will be
denoted by $S_i$.

At each $s$ iterations, another kind of minimization step is applied in order to
compute a new  solution $x$. For that, the previous  residuals of $Ax=b$ are computed by
the inner iterations with $(b-AS)$. The minimization of the residuals is obtained by  
\begin{equation}
   \underset{\alpha\in\mathbb{R}^{s}}{min}\|b-R\alpha\|_2
\label{eq:01}
\end{equation}
with $R=AS$. The new solution $x$ is then computed with $x=S\alpha$.


In  practice, $R$  is a  dense rectangular  matrix belonging in  $\mathbb{R}^{n\times s}$,
with $s\ll n$.   In order  to minimize~\eqref{eq:01}, a  least-squares method  such as
CGLS ~\cite{Hestenes52}  or LSQR~\cite{Paige82} is used. Remark that these  methods are more
appropriate than a single direct method in a parallel context.



\begin{algorithm}[t]
\caption{TSIRM}
\begin{algorithmic}[1]
  \Input $A$ (sparse matrix), $b$ (right-hand side)
  \Output $x$ (solution vector)\vspace{0.2cm}
  \State Set the initial guess $x_0$
  \For {$k=1,2,3,\ldots$ until convergence ($error<\epsilon_{tsirm}$)} \label{algo:conv}
    \State  $[x_k,error]=Solve(A,b,x_{k-1},max\_iter_{kryl})$   \label{algo:solve}
    \State $S_{k \mod s}=x_k$ \label{algo:store} \Comment{update column ($k \mod s$) of $S$}
    \If {$k \mod s=0$ {\bf and} $error>\epsilon_{kryl}$}
      \State $R=AS$ \Comment{compute dense matrix} \label{algo:matrix_mul}
            \State $\alpha=Least\_Squares(R,b,max\_iter_{ls})$ \label{algo:}
      \State $x_k=S\alpha$  \Comment{compute new solution}
    \EndIf
  \EndFor
\end{algorithmic}
\label{algo:01}
\end{algorithm}

Algorithm~\ref{algo:01} summarizes  the principle  of the proposed  method.  The
outer iteration is inside the \emph{for} loop. Line~\ref{algo:solve}, the Krylov
method is called  for a maximum of $max\_iter_{kryl}$  iterations.  In practice,
we suggest to  set this parameter equal to the restart  number in the GMRES-like
method. Moreover,  a tolerance  threshold must be  specified for the  solver. In
practice, this threshold must be  much smaller than the convergence threshold of
the TSIRM  algorithm (\emph{i.e.},  $\epsilon_{tsirm}$).  We also  consider that
after  the call of  the $Solve$  function, we  obtain the  vector $x_k$  and the
$error$, which is defined by $||Ax_k-b||_2$.

  Line~\ref{algo:store},  $S_{k \mod  s}=x_k$ consists  in copying  the solution
  $x_k$ into the  column $k \mod s$ of $S$.  After  the minimization, the matrix
  $S$ is reused with the new values of the residuals.  To solve the minimization
  problem, an  iterative method is used.  Two parameters are  required for that:
  the maximum number of iterations  ($max\_iter_{ls}$) and the threshold to stop
  the method ($\epsilon_{ls}$).

Let us summarize the most important parameters of TSIRM:
\begin{itemize}
\item $\epsilon_{tsirm}$: the threshold to stop the TSIRM method;
\item $max\_iter_{kryl}$: the maximum number of iterations for the Krylov method;
\item $s$: the number of outer iterations before applying the minimization step;
\item $max\_iter_{ls}$: the maximum number of iterations for the iterative least-squares method;
\item $\epsilon_{ls}$: the threshold used to stop the least-squares method.
\end{itemize}


The  parallelization  of  TSIRM  relies   on  the  parallelization  of  all  its
parts. More  precisely, except  the least-squares step,  all the other  parts are
obvious to  achieve out in parallel. In  order to develop a  parallel version of
our   code,   we   have   chosen  to   use   PETSc~\cite{petsc-web-page}.    For
line~\ref{algo:matrix_mul} the  matrix-matrix multiplication is  implemented and
efficient since the  matrix $A$ is sparse and since the  matrix $S$ contains few
columns in  practice. As explained  previously, at least  two methods seem  to be
interesting to solve the least-squares minimization, CGLS and LSQR.

In Algorithm~\ref{algo:02} we remind the CGLS algorithm. The LSQR method follows
more or less the  same principle but it takes more place,  so we briefly explain
the parallelization of CGLS which is  similar to LSQR.

\begin{algorithm}[t]
\caption{CGLS}
\begin{algorithmic}[1]
  \Input $A$ (matrix), $b$ (right-hand side)
  \Output $x$ (solution vector)\vspace{0.2cm}
  \State Let $x_0$ be an initial approximation
  \State $r_0=b-Ax_0$
  \State $p_1=A^Tr_0$
  \State $s_0=p_1$
  \State $\gamma=||s_0||^2_2$
  \For {$k=1,2,3,\ldots$ until convergence ($\gamma<\epsilon_{ls}$)} \label{algo2:conv}
    \State $q_k=Ap_k$
    \State $\alpha_k=\gamma/||q_k||^2_2$
    \State $x_k=x_{k-1}+\alpha_kp_k$
    \State $r_k=r_{k-1}-\alpha_kq_k$
    \State $s_k=A^Tr_k$
    \State $\gamma_{old}=\gamma$
    \State $\gamma=||s_k||^2_2$
    \State $\beta_k=\gamma/\gamma_{old}$
    \State $p_{k+1}=s_k+\beta_kp_k$
  \EndFor
\end{algorithmic}
\label{algo:02}
\end{algorithm}


In each iteration  of CGLS, there is two  matrix-vector multiplications and some
classical  operations:  dot  product,   norm,  multiplication  and  addition  on
vectors.  All  these  operations are  easy  to  implement  in PETSc  or  similar
environment.  It should be noticed that LSQR follows the same principle, it is a
little bit longer but it performs more or less the same operations.


%%%*********************************************************
%%%*********************************************************

\section{Convergence results}
\label{sec:04}


We can now claim that,
\begin{proposition}
\label{prop:saad}
If $A$ is either a definite positive or a positive matrix and GMRES($m$) is used as solver, then the TSIRM algorithm is convergent. 

Furthermore, let $r_k$ be the
$k$-th residue of TSIRM, then
we have the following boundaries:
\begin{itemize}
\item when $A$ is positive:
\begin{equation}
||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0|| ,
\end{equation}
where $M$ is the symmetric part of $A$, $\alpha = \lambda_{min}(M)^2$ and $\beta = \lambda_{max}(A^T A)$;
\item when $A$ is positive definite:
\begin{equation}
\|r_k\| \leq \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_0\|.
\end{equation}
\end{itemize}
%In the general case, where A is not positive definite, we have
%$\|r_n\| \le \inf_{p \in P_n} \|p(A)\| \le \kappa_2(V) \inf_{p \in P_n} \max_{\lambda \in \sigma(A)} |p(\lambda)| \|r_0\|, .$
\end{proposition}

\begin{proof}
Let us first recall that the residue is under control when considering the GMRES algorithm on a positive definite matrix, and it is bounded as follows:
\begin{equation*}
\|r_k\| \leq \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{k/2} \|r_0\| .
\end{equation*}
Additionally, when $A$ is a positive real matrix with symmetric part $M$, then the residual norm provided at the $m$-th step of GMRES satisfies:
\begin{equation*}
||r_m|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_0|| ,
\end{equation*}
where $\alpha$ and $\beta$ are defined as in Proposition~\ref{prop:saad}, which proves 
the convergence of GMRES($m$) for all $m$ under such assumptions regarding $A$.
These well-known results can be found, \emph{e.g.}, in~\cite{Saad86}.

We will now prove by a mathematical induction that, for each $k \in \mathbb{N}^\ast$, 
$||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{mk}{2}} ||r_0||$ when $A$ is positive, and $\|r_k\| \leq \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_0\|$ when $A$ is positive definite.

The base case is obvious, as for $k=1$, the TSIRM algorithm simply consists in applying GMRES($m$) once, leading to a new residual $r_1$ that follows the inductive hypothesis due, to the results recalled above.

Suppose now that the claim holds for all $m=1, 2, \hdots, k-1$, that is, $\forall m \in \{1,2,\hdots, k-1\}$, $||r_m|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$ in the positive case, and $\|r_k\| \leq \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_0\|$ in the definite positive one.
We will show that the statement holds too for $r_k$. Two situations can occur:
\begin{itemize}
\item If $k \not\equiv 0 ~(\textrm{mod}\ m)$, then the TSIRM algorithm consists in executing GMRES once. In that case and by using the inductive hypothesis, we obtain either $||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_{k-1}||\leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$ if $A$ is positive, or $\|r_k\| \leqslant \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{m/2} \|r_{k-1}\|$ $\leqslant$ $\left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_{0}\|$ in the positive definite case.
\item Else, the TSIRM algorithm consists in two stages: a first GMRES($m$) execution leads to a temporary $x_k$ whose residue satisfies:
\begin{itemize}
\item $||r_k|| \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{m}{2}} ||r_{k-1}||\leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||$ in the positive case, 
\item $\|r_k\| \leqslant \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{m/2} \|r_{k-1}\|$ $\leqslant$ $\left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_{0}\|$ in the positive definite one,
\end{itemize}
and a least squares resolution.
Let $\operatorname{span}(S) = \left \{ {\sum_{i=1}^k \lambda_i v_i \Big| k \in \mathbb{N}, v_i \in S, \lambda _i \in \mathbb{R}} \right \}$ be the linear span of a set of real vectors $S$. So,\\
$\min_{\alpha \in \mathbb{R}^s} ||b-R\alpha ||_2 = \min_{\alpha \in \mathbb{R}^s} ||b-AS\alpha ||_2$

$\begin{array}{ll}
& = \min_{x \in span\left(S_{k-s+1}, S_{k-s+2}, \hdots, S_{k} \right)} ||b-AS\alpha ||_2\\
& = \min_{x \in span\left(x_{k-s+1}, x_{k-s}+2, \hdots, x_{k} \right)} ||b-AS\alpha ||_2\\
& \leqslant \min_{x \in span\left( x_{k} \right)} ||b-Ax ||_2\\
& \leqslant \min_{\lambda \in \mathbb{R}} ||b-\lambda Ax_{k} ||_2\\
& \leqslant ||b-Ax_{k}||_2\\
& = ||r_k||_2\\
& \leqslant \left(1-\dfrac{\alpha}{\beta}\right)^{\frac{km}{2}} ||r_0||, \textrm{ if $A$ is positive,}\\
& \leqslant \left( 1-\frac{\lambda_{\mathrm{min}}^2(1/2(A^T + A))}{ \lambda_{\mathrm{max}}(A^T A)} \right)^{km/2} \|r_{0}\|, \textrm{ if $A$ is}\\
& \textrm{positive definite,} 
\end{array}$
\end{itemize}
which concludes the induction and the proof.
\end{proof}

%We can remark that, at each iterate, the residue of the TSIRM algorithm is lower 
%than the one of the GMRES method.

%%%*********************************************************
%%%*********************************************************
\section{Experiments using PETSc}
\label{sec:05}


In order to see the behavior of our approach when considering only one processor,
a  first  comparison  with  GMRES  or  FGMRES and  the  new  algorithm  detailed
previously  has been  experimented.  Matrices  that  have been  used with  their
characteristics (names, fields, rows,  and nonzero coefficients) are detailed in
Table~\ref{tab:01}.  These  latter, which are  real-world applications matrices,
have    been   extracted    from   the    Davis   collection,    University   of
Florida~\cite{Dav97}.

\begin{table}[htbp]
\begin{center}
\begin{tabular}{|c|c|r|r|r|} 
\hline
Matrix name              & Field             &\# Rows   & \# Nonzeros   \\\hline \hline
crashbasis         & Optimization      & 160,000  &  1,750,416  \\
parabolic\_fem     & Comput. fluid dynamics  & 525,825 & 2,100,225 \\
epb3               & Thermal problem   & 84,617  & 463,625  \\
atmosmodj          & Comput. fluid dynamics  & 1,270,432 & 8,814,880 \\
bfwa398            & Electromagnetics pb & 398 & 3,678 \\
torso3             & 2D/3D problem & 259,156 & 4,429,042 \\
\hline

\end{tabular}
\caption{Main characteristics of the sparse matrices chosen from the Davis collection}
\label{tab:01}
\end{center}
\end{table}
Chosen parameters  are detailed below.   As by default  the restart of  GMRES is
performed  every 30  iterations,  we have  chosen  to stop  the  GMRES every  30
iterations (\emph{i.e.} $max\_iter_{kryl}=30$).  $s$ is set to 8. CGLS is chosen
to   minimize  the   least-squares  problem   with  the   following  parameters:
$\epsilon_{ls}=1e-40$ and $max\_iter_{ls}=20$.  The external precision is set to
$\epsilon_{tsirm}=1e-10$.  Those  experiments have been performed  on a Intel(R)
Core(TM) i7-3630QM CPU @ 2.40GHz with the version 3.5.1 of PETSc.


In  Table~\ref{tab:02}, some  experiments comparing  the solving  of  the linear
systems obtained with the previous matrices  with a GMRES variant and with TSIRM
are given. In the  second column, it can be noticed that  either GMRES or FGMRES
(Flexible GMRES)~\cite{Saad:1993} is used to solve the linear system.  According
to  the matrices,  different preconditioners  are  used.  With  TSIRM, the  same
solver and the  same preconditionner are used.  This Table  shows that TSIRM can
drastically reduce  the number of iterations  to reach the  convergence when the
number of iterations for  the normal GMRES is more or less  greater than 500. In
fact this also depends on two parameters: the number of iterations to stop GMRES
and the number of iterations to perform the minimization.


\begin{table}[htbp]
\begin{center}
\begin{tabular}{|c|c|r|r|r|r|} 
\hline

 \multirow{2}{*}{Matrix name}  & Solver /   & \multicolumn{2}{c|}{GMRES} & \multicolumn{2}{c|}{TSIRM CGLS} \\ 
\cline{3-6}
       &  precond             & Time  & \# Iter.  & Time  & \# Iter.  \\\hline \hline

crashbasis         & gmres / none             &  15.65     & 518  &  14.12 & 450  \\
parabolic\_fem     & gmres / ilu           & 1009.94   & 7573 & 401.52 & 2970 \\
epb3               & fgmres / sor             &  8.67     & 600  &  8.21 & 540  \\
atmosmodj          &  fgmres / sor & 104.23  & 451 & 88.97 & 366  \\
bfwa398            & gmres / none  & 1.42 & 9612 & 0.28 & 1650 \\
torso3             & fgmres / sor  & 37.70 & 565 & 34.97 & 510 \\
\hline

\end{tabular}
\caption{Comparison of (F)GMRES and TSIRM with (F)GMRES in sequential with some matrices, time is expressed in seconds.}
\label{tab:02}
\end{center}
\end{table}





In order to perform larger experiments, we have tested some example applications
of  PETSc. Those  applications are  available in  the \emph{ksp}  part  which is
suited for scalable linear equations solvers:
\begin{itemize}
\item ex15  is an example  which solves in  parallel an operator using  a finite
  difference  scheme.   The  diagonal  is  equal to  4  and  4  extra-diagonals
  representing the neighbors in each directions  are equal to -1. This example is
  used  in many  physical phenomena, for  example, heat  and fluid  flow, wave
  propagation, etc.
\item ex54 is another example based on 2D problem discretized with quadrilateral
  finite elements. For this example, the user can define the scaling of material
  coefficient in embedded circle called $\alpha$.
\end{itemize}
For more technical details on these applications, interested readers are invited
to read  the codes  available in  the PETSc sources.   Those problems  have been
chosen because they are scalable with many  cores.

In  the  following   larger  experiments  are  described  on   two  large  scale
architectures: Curie  and Juqueen.   Both these architectures  are supercomputer
respectively  composed  of  80,640  cores   for  Curie  and  458,752  cores  for
Juqueen. Those  machines are respectively hosted  by GENCI in  France and Jülich
Supercomputing Centre in Germany.  They belongs with other similar architectures
of the  PRACE initiative (Partnership  for Advanced Computing  in Europe) which
aims  at  proposing  high  performance supercomputing  architecture  to  enhance
research  in  Europe.  The  Curie  architecture is  composed  of  Intel  E5-2680
processors  at 2.7  GHz with  2Gb memory  by core.  The Juqueen  architecture is
composed of  IBM PowerPC  A2 at  1.6 GHz with  1Gb memory  per core.  Both those
architecture are equiped with a dedicated high speed network.


In  many situations, using  preconditioners is  essential in  order to  find the
solution of a linear system.  There are many preconditioners available in PETSc.
For parallel applications all  the preconditioners based on matrix factorization
are  not  available. In  our  experiments, we  have  tested  different kinds  of
preconditioners, however  as it is  not the subject  of this paper, we  will not
present results with many preconditioners. In  practice, we have chosen to use a
multigrid (mg)  and successive  over-relaxation (sor). For  more details  on the
preconditioner in PETSc please consult~\cite{petsc-web-page}.



\begin{table*}[htbp]
\begin{center}
\begin{tabular}{|r|r|r|r|r|r|r|r|r|} 
\hline

  nb. cores & precond   & \multicolumn{2}{c|}{FGMRES} & \multicolumn{2}{c|}{TSIRM CGLS} &  \multicolumn{2}{c|}{TSIRM LSQR} & best gain \\ 
\cline{3-8}
             &                       & Time  & \# Iter.  & Time  & \# Iter. & Time  & \# Iter. & \\\hline \hline
  2,048      & mg                    & 403.49   & 18,210    & 73.89  & 3,060   & 77.84  & 3,270  & 5.46 \\
  2,048      & sor                   & 745.37   & 57,060    & 87.31  & 6,150   & 104.21 & 7,230  & 8.53 \\
  4,096      & mg                    & 562.25   & 25,170    & 97.23  & 3,990   & 89.71  & 3,630  & 6.27 \\
  4,096      & sor                   & 912.12   & 70,194    & 145.57 & 9,750   & 168.97 & 10,980 & 6.26 \\
  8,192      & mg                    & 917.02   & 40,290    & 148.81 & 5,730   & 143.03 & 5,280  & 6.41 \\
  8,192      & sor                   & 1,404.53 & 106,530   & 212.55 & 12,990  & 180.97 & 10,470 & 7.76 \\
  16,384     & mg                    & 1,430.56 & 63,930    & 237.17 & 8,310   & 244.26 & 7,950  & 6.03 \\
  16,384     & sor                   & 2,852.14 & 216,240   & 418.46 & 21,690  & 505.26 & 23,970 & 6.82 \\
\hline

\end{tabular}
\caption{Comparison of FGMRES and TSIRM with FGMRES for example ex15 of PETSc with two preconditioners (mg and sor) with 25,000 components per core on Juqueen ($\epsilon_{tsirm}=1e-3$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$),  time is expressed in seconds.}
\label{tab:03}
\end{center}
\end{table*}

Table~\ref{tab:03} shows  the execution  times and the  number of  iterations of
example ex15  of PETSc on the  Juqueen architecture. Different  numbers of cores
are studied  ranging from 2,048 up-to  16,383 with the  two preconditioners {\it
  mg}  and {\it  sor}.   For those  experiments,  the number  of components  (or
unknowns  of  the problems)  per  core  is fixed  to  25,000,  also called  weak
scaling. This number  can seem relatively small. In  fact, for some applications
that  need a  lot of  memory, the  number of  components per  processor requires
sometimes to  be small. Other parameters  for this application  are described in
the legend of this Table.



In  Table~\ref{tab:03},  we  can  notice   that  TSIRM  is  always  faster  than
FGMRES. The last  column shows the ratio between FGMRES and  the best version of
TSIRM according  to the minimization  procedure: CGLS or  LSQR. Even if  we have
computed the worst case between CGLS and  LSQR, it is clear that TSIRM is always
faster than  FGMRES. For  this example, the  multigrid preconditioner  is faster
than SOR. The gain between TSIRM and  FGMRES is more or less similar for the two
preconditioners.  Looking at the number  of iterations to reach the convergence,
it is  obvious that TSIRM allows the  reduction of the number  of iterations. It
should be noticed  that for TSIRM, in those experiments,  only the iterations of
the Krylov solver  are taken into account.  Iterations of CGLS  or LSQR were not
recorded  but they  are  time-consuming.  In  general each  $max\_iter_{kryl}*s$
iterations which corresponds to 30*12, there are $max\_iter_{ls}$ iterations for
the least-squares method which corresponds to 15.

\begin{figure}[htbp]
\centering
  \includegraphics[width=0.45\textwidth]{nb_iter_sec_ex15_juqueen}
\caption{Number of iterations per second with ex15 and the same parameters than in Table~\ref{tab:03} (weak scaling)}
\label{fig:01}
\end{figure}


In  Figure~\ref{fig:01}, the number  of iterations  per second  corresponding to
Table~\ref{tab:03}  is  displayed.   It  can  be  noticed  that  the  number  of
iterations per second of FMGRES is  constant whereas it decreases with TSIRM with
both preconditioners. This  can be explained by the fact that  when the number of
cores increases the time for the least-squares minimization step also increases but, generally,
when  the number  of cores  increases,  the number  of iterations  to reach  the
threshold also increases,  and, in that case, TSIRM is  more efficient to reduce
the number of iterations. So, the overall benefit of using TSIRM is interesting.






\begin{table*}[htbp]
\begin{center}
\begin{tabular}{|r|r|r|r|r|r|r|r|r|} 
\hline

  nb. cores & $\epsilon_{tsirm}$  & \multicolumn{2}{c|}{FGMRES} & \multicolumn{2}{c|}{TSIRM CGLS} &  \multicolumn{2}{c|}{TSIRM LSQR} & best gain \\ 
\cline{3-8}
             &                       & Time  & \# Iter.  & Time  & \# Iter. & Time  & \# Iter. & \\\hline \hline
  2,048      & 8e-5                  & 108.88 & 16,560  & 23.06  &  3,630  & 22.79  & 3,630   & 4.77 \\
  2,048      & 6e-5                  & 194.01 & 30,270  & 35.50  &  5,430  & 27.74  & 4,350   & 6.99 \\
  4,096      & 7e-5                  & 160.59 & 22,530  & 35.15  &  5,130  & 29.21  & 4,350   & 5.49 \\
  4,096      & 6e-5                  & 249.27 & 35,520  & 52.13  &  7,950  & 39.24  & 5,790   & 6.35 \\
  8,192      & 6e-5                  & 149.54 & 17,280  & 28.68  &  3,810  & 29.05  & 3,990  & 5.21 \\
  8,192      & 5e-5                  & 785.04 & 109,590 & 76.07  &  10,470  & 69.42 & 9,030  & 11.30 \\
  16,384     & 4e-5                  & 718.61 & 86,400 & 98.98  &  10,830  & 131.86  & 14,790  & 7.26 \\
\hline

\end{tabular}
\caption{Comparison of FGMRES  and TSIRM with FGMRES algorithms for ex54 of Petsc (both with the MG preconditioner) with 25,000 components per core on Curie ($max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$),  time is expressed in seconds.}
\label{tab:04}
\end{center}
\end{table*}


In  Table~\ref{tab:04},  some  experiments   with  example  ex54  on  the  Curie
architecture are reported.  For this  application, we fixed $\alpha=0.6$.  As it
can be seen in that Table, the size of the problem has a strong influence on the
number of iterations to reach the  convergence. That is why we have preferred to
change the threshold.  If we set  it to $1e-3$ as with the previous application,
only one iteration is necessary  to reach the convergence. So Table~\ref{tab:04}
shows the  results of  different executions with  different number of  cores and
different thresholds. As with the previous example, we can observe that TSIRM is
faster than  FGMRES. The ratio greatly  depends on the number  of iterations for
FMGRES to reach the threshold. The greater the number of iterations to reach the
convergence is, the  better the ratio between our algorithm  and FMGRES is. This
experiment is  also a  weak scaling with  approximately $25,000$  components per
core. It can also  be observed that the difference between CGLS  and LSQR is not
significant. Both can be good but it seems not possible to know in advance which
one will be the best.

Table~\ref{tab:05} show a strong scaling experiment with the exemple ex54 on the
Curie  architecture. So  in  this case,  the  number of  unknownws  is fixed  to
$204,919,225$ and the number of cores ranges from $512$ to $8192$ with the power
of two.  The  threshold is fixed to $5e-5$ and only  the $mg$ preconditioner has
been tested. Here again we can  see that TSIRM is faster that FGMRES. Efficiency
of each algorithm  is reported. It can be noticed that  the efficiency of FGMRES
is better than  the TSIRM one except with $8,192$ cores  and that its efficiency
is  greater   that  one   whereas  the  efficiency   of  TSIRM  is   lower  than
one.  Nevertheless, the ratio  of TSIRM  with any  version of  the least-squares
method is  always faster.  With $8,192$  cores when the number  of iterations is
far  more important  for  FGMRES,  we can  see  that it  is  only slightly  more
important for TSIRM.

In  Figure~\ref{fig:02}  we report  the  number  of  iterations per  second  for
experiments  reported in  Table~\ref{tab:05}.  This  Figure highlights  that the
number of iterations  per second is more  of less the same for  FGMRES and TSIRM
with a little advantage for FGMRES. It  can be explained by the fact that, as we
have previously explained, that the iterations of the least-squares steps are not
taken into account with TSIRM.

\begin{table*}[htbp]
\begin{center}
\begin{tabular}{|r|r|r|r|r|r|r|r|r|r|r|} 
\hline

  nb. cores   & \multicolumn{2}{c|}{FGMRES} & \multicolumn{2}{c|}{TSIRM CGLS} &  \multicolumn{2}{c|}{TSIRM LSQR} & best gain & \multicolumn{3}{c|}{efficiency} \\ 
\cline{2-7} \cline{9-11}
                    & Time  & \# Iter.  & Time  & \# Iter. & Time  & \# Iter. &   & FGMRES & TS CGLS & TS LSQR\\\hline \hline
   512              & 3,969.69 & 33,120 & 709.57 & 5,790  & 622.76 & 5,070  & 6.37  &   1    &    1    &     1     \\
   1024             & 1,530.06  & 25,860 & 290.95 & 4,830  & 307.71 & 5,070 & 5.25  &  1.30  &    1.21  &   1.01     \\
   2048             & 919.62    & 31,470 & 237.52 & 8,040  & 194.22 & 6,510 & 4.73  & 1.08   &    .75   &   .80\\
   4096             & 405.60    & 28,380 & 111.67 & 7,590  & 91.72  & 6,510 & 4.42  & 1.22   &  .79     &   .84 \\
   8192             & 785.04   & 109,590 & 76.07  & 10,470 & 69.42 & 9,030  & 11.30 &   .32  &   .58    &  .56 \\

\hline

\end{tabular}
\caption{Comparison of FGMRES  and TSIRM for ex54 of PETSc (both with the MG preconditioner) with 204,919,225 components on Curie with different number of cores ($\epsilon_{tsirm}=5e-5$, $max\_iter_{kryl}=30$, $s=12$, $max\_iter_{ls}=15$, $\epsilon_{ls}=1e-40$),  time is expressed in seconds.}
\label{tab:05}
\end{center}
\end{table*}

\begin{figure}[htbp]
\centering
  \includegraphics[width=0.45\textwidth]{nb_iter_sec_ex54_curie}
\caption{Number of iterations per second with ex54 and the same parameters than in Table~\ref{tab:05} (strong scaling)}
\label{fig:02}
\end{figure}


Concerning the  experiments some  other remarks are  interesting.
\begin{itemize}
\item We  have tested other examples of  PETSc (ex29, ex45, ex49).  For all these
  examples,  we also obtained  similar gain  between GMRES  and TSIRM  but those
  examples are  not scalable with many  cores. In general, we  had some problems
  with more than $4,096$ cores.
\item We have tested many iterative  solvers available in PETSc.  In fact, it is
  possible to use most of them with TSIRM. From our point of view, the condition
  to  use  a  solver inside  TSIRM  is  that  the  solver  must have  a  restart
  feature. More  precisely, the solver must  support to be  stopped and restarted
  without decrease its  converge. That is why  with GMRES we stop it  when it is
  naturally  restarted (i.e.  with  $m$ the  restart parameter).   The Conjugate
  Gradient (CG) and all its variants do not have ``restarted'' version in PETSc,
  so they  are not  efficient.  They  will converge with  TSIRM but  not quickly
  because if  we compare  a normal CG  with a CG  for which  we stop it  each 16
  iterations  for example,  the  normal CG  will  be for  more efficient.   Some
  restarted CG  or CG variant versions exist  and may be interested  to study in
  future works.
\end{itemize}
%%%*********************************************************
%%%*********************************************************



%%%*********************************************************
%%%*********************************************************
\section{Conclusion}
\label{sec:06}
%The conclusion goes here. this is more of the conclusion
%%%*********************************************************
%%%*********************************************************

A novel two-stage iterative  algorithm has been proposed in this article,
in order to accelerate the convergence Krylov iterative  methods.
Our TSIRM proposal acts as a merger between Krylov based solvers and
a least-squares minimization step.
The convergence of the method has been proven in some situations, while 
experiments up to 16,394 cores have been led to verify that TSIRM runs
5 or  7 times  faster than GMRES.


For  future  work, the  authors'  intention is  to  investigate  other kinds  of
matrices, problems, and  inner solvers. The influence of  all parameters must be
tested too, while other methods to minimize the residuals must be regarded.  The
number of outer  iterations to minimize should become  adaptative to improve the
overall performances of the proposal.   Finally, this solver will be implemented
inside PETSc. This  would be very interesting because it would  allow us to test
all the non-linear  examples and compare our algorithm  with the other algorithm
implemented in PETSc.


% conference papers do not normally have an appendix



% use section* for acknowledgement
%%%*********************************************************
%%%*********************************************************
\section*{Acknowledgment}
This  paper  is   partially  funded  by  the  Labex   ACTION  program  (contract
ANR-11-LABX-01-01).   We acknowledge PRACE  for awarding  us access  to resources
Curie and Juqueen respectively based in France and Germany.



% trigger a \newpage just before the given reference
% number - used to balance the columns on the last page
% adjust value as needed - may need to be readjusted if
% the document is modified later
%\IEEEtriggeratref{8}
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}

% references section

% can use a bibliography generated by BibTeX as a .bbl file
% BibTeX documentation can be easily obtained at:
% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
\bibliography{biblio}
%
% <OR> manually copy in the resultant .bbl file
% set second argument of \begin to the number of references
% (used to reserve space for the reference number labels box)
%% \begin{thebibliography}{1}

%% \bibitem{saad86} Y.~Saad and M.~H.~Schultz, \emph{GMRES: A Generalized Minimal Residual Algorithm for Solving Nonsymmetric Linear Systems}, SIAM Journal on Scientific and Statistical Computing, 7(3):856--869, 1986.

%% \bibitem{saad96} Y.~Saad, \emph{Iterative Methods for Sparse Linear Systems}, PWS Publishing, New York, 1996.

%% \bibitem{hestenes52} M.~R.~Hestenes and E.~Stiefel, \emph{Methods of conjugate gradients for solving linear system}, Journal of Research of National Bureau of Standards, B49:409--436, 1952.

%% \bibitem{paige82} C.~C.~Paige and A.~M.~Saunders, \emph{LSQR: An Algorithm for Sparse Linear Equations and Sparse Least Squares}, ACM Trans. Math. Softw. 8(1):43--71, 1982.
%% \end{thebibliography}




% that's all folks
\end{document}