Almost final modifications

[Sensornets15.git] / Example.tex

diff --git a/Example.tex b/Example.tex
index a7e85c3e5c6fd1702a2996389d24c1eea347d9fe..b2b473fa653c7fe59132b1f9da281b64f687570b 100644 (file)
--- a/Example.tex
+++ b/Example.tex
@@ -1,322 +1,242 @@
-\documentclass[a4paper,twoside]{article}
+\documentclass[a4,12pt]{article}

 
 

+
+\usepackage[paper=a4paper,dvips,top=1.5cm,left=1.5cm,right=1.5cm,foot=1cm,bottom=1.5cm]{geometry}

 \usepackage{epsfig}
 \usepackage{subfigure}
 \usepackage{epsfig}
 \usepackage{subfigure}

-\usepackage{calc}
+%\usepackage{calc}

 \usepackage{amssymb}
 \usepackage{amssymb}

-\usepackage{amstext}
-\usepackage{amsmath}
-\usepackage{amsthm}
-\usepackage{multicol}
-\usepackage{pslatex}
-\usepackage{apalike}
-\usepackage{SCITEPRESS}
+%\usepackage{amstext}
+%\usepackage{amsmath}
+%\usepackage{amsthm}
+%\usepackage{multicol}
+%\usepackage{pslatex}
+%\usepackage{apalike}
+%\usepackage{SCITEPRESS}

 \usepackage[small]{caption}
 \usepackage[small]{caption}

-
+\usepackage{color}

 \usepackage[linesnumbered,ruled,vlined,commentsnumbered]{algorithm2e}
 \usepackage{mathtools}  
 
 \usepackage[linesnumbered,ruled,vlined,commentsnumbered]{algorithm2e}
 \usepackage{mathtools}  
 

-\subfigtopskip=0pt
-\subfigcapskip=0pt
-\subfigbottomskip=0pt
+%\subfigtopskip=0pt
+%\subfigcapskip=0pt
+%\subfigbottomskip=0pt
+

 
 

-\begin{document}

 
 %\title{Authors' Instructions  \subtitle{Preparation of Camera-Ready Contributions to SCITEPRESS Proceedings} }
 
 
 %\title{Authors' Instructions  \subtitle{Preparation of Camera-Ready Contributions to SCITEPRESS Proceedings} }
 

-\title{Distributed Lifetime Coverage Optimization Protocol \\in Wireless Sensor Networks}
+\title{Distributed Lifetime Coverage Optimization Protocol \\
+  in Wireless Sensor Networks}

 
 

-\author{\authorname{Ali Kadhum Idrees, Karine Deschinkel, Michel Salomon, and Rapha\"el Couturier}
-\affiliation{FEMTO-ST Institute, UMR 6174 CNRS, University of Franche-Comt\'e, Belfort, France}
-%\affiliation{\sup{2}Department of Computing, Main University, MySecondTown, MyCountry}
-\email{ali.idness@edu.univ-fcomte.fr, $\lbrace$karine.deschinkel, michel.salomon, raphael.couturier$\rbrace$@univ-fcomte.fr}
-%\email{\{f\_author, s\_author\}@ips.xyz.edu, t\_author@dc.mu.edu}
-}
+\author{Ali Kadhum Idrees$^{a,b}$, Karine Deschinkel$^{a}$,\\ Michel Salomon$^{a}$, and Rapha\"el Couturier$^{a}$\\
+$^{a}$FEMTO-ST Institute, UMR 6174 CNRS, \\ University  Bourgogne  Franche-Comt\'e, Belfort, France\\
+$^{b}${\em{Department of Computer Science, University of Babylon, Babylon, Iraq}}\\
+email: ali.idness@edu.univ-fcomte.fr,\\ $\lbrace$karine.deschinkel, michel.salomon, raphael.couturier$\rbrace$@univ-fcomte.fr}
+
+%\author{Ali   Kadhum   Idrees$^{a,b}$,   Karine  Deschinkel$^{a}$,\\  Michel Salomon$^{a}$,   and  Rapha\"el   Couturier   $^{a}$  \\   
+%$^{a}${\em{FEMTO-ST Institute,  UMR  6174  CNRS,   University  Bourgogne  Franche-Comt\'e,\\ Belfort, France}} \\ 
+%$^{b}${\em{Department of Computer Science, University of Babylon, Babylon, Iraq}} }

 
 

-\keywords{Wireless   Sensor   Networks,   Area   Coverage,   Network   lifetime,
-Optimization, Scheduling.}
+\begin{document}
+ \maketitle 
+%\keywords{Wireless   Sensor   Networks,   Area   Coverage,   Network   lifetime,Optimization, Scheduling.}

 
 \abstract{ One of the main research challenges faced in Wireless Sensor Networks
   (WSNs) is to preserve continuously and effectively the coverage of an area (or
   region) of interest  to be monitored, while simultaneously  preventing as much
   as possible a network failure due to battery-depleted nodes.  In this paper we
   propose a protocol, called Distributed Lifetime Coverage Optimization protocol
 
 \abstract{ One of the main research challenges faced in Wireless Sensor Networks
   (WSNs) is to preserve continuously and effectively the coverage of an area (or
   region) of interest  to be monitored, while simultaneously  preventing as much
   as possible a network failure due to battery-depleted nodes.  In this paper we
   propose a protocol, called Distributed Lifetime Coverage Optimization protocol

-  (DiLCO), which maintains the coverage  and improves the lifetime of a wireless
-  sensor  network. As  a  first step  we  partition the  area  of interest  into
-  subregions using a classical  divide-and-conquer method. Our DiLCO protocol is
-  then distributed  on the sensor nodes in  each subregion in a  second step. To
-  fulfill  our   objective,  the   proposed  protocol  combines   two  effective
-  techniques:   a  leader   election   in  each   subregion,   followed  by   an
-  optimization-based node activity scheduling  performed by each elected leader.
-  This two-step process takes place periodically, in order to choose a small set
-  of nodes remaining  active for sensing during a time slot.   Each set is built
-  to ensure  coverage at  a low  energy cost, allowing  to optimize  the network
-  lifetime. More  precisely, a period  consists of four  phases: (i)~Information
-  Exchange,  (ii)~Leader   Election,  (iii)~Decision,  and   (iv)~Sensing.   The
-  decision process, which results in  an activity scheduling vector,  is carried
-  out by a leader node through  the solving of an integer program. In comparison
-  with  some other  protocols, the  simulations  done using  the discrete  event
-  simulator OMNeT++ show that our approach  is able to increase the WSN lifetime
-  and provides improved coverage performance. }
-
-\onecolumn \maketitle \normalsize \vfill
+  (DiLCO), which maintains the coverage and  improves the lifetime of a wireless
+  sensor network. First, we partition the area of interest into subregions using
+  a classical divide-and-conquer method.  Our DiLCO protocol is then distributed
+  on  the sensor  nodes in  each subregion  in a  second step.   To fulfill  our
+  objective, the proposed  protocol combines two effective  techniques: a leader
+  election in  each subregion, followed  by an optimization-based  node activity
+  scheduling  performed by  each elected  leader.  This  two-step process  takes
+  place periodically, in  order to choose a small set  of nodes remaining active
+  for sensing during a time slot.  Each set is built to ensure coverage at a low
+  energy cost,  allowing to optimize  the network lifetime.  
+%More  precisely, a
+  %period  consists  of  four   phases:  (i)~Information  Exchange,  (ii)~Leader
+  %Election,  (iii)~Decision, and  (iv)~Sensing.   The  decision process,  which
+%  results in  an activity  scheduling vector,  is carried out  by a  leader node
+%  through the solving of an integer program.
+% MODIF - BEGIN
+  Simulations are conducted using the discret event simulator
+  OMNET++.  We  refer to the characterictics  of a Medusa II  sensor for
+  the energy consumption  and the computation time.   In comparison with
+  two other existing  methods, our approach is able to  increase the WSN
+  lifetime and provides improved coverage performance. }
+% MODIF - END
+
+%\onecolumn
+
+
+%\normalsize \vfill

 
 \section{\uppercase{Introduction}}
 \label{sec:introduction}
 
 \noindent 
 
 \section{\uppercase{Introduction}}
 \label{sec:introduction}
 
 \noindent 

-Energy efficiency is  a crucial issue in wireless  sensor networks since sensory
+Energy efficiency is  a crucial issue in wireless sensor  networks since sensory

 consumption, in  order to  maximize the network  lifetime, represents  the major
 difficulty when designing WSNs. As a consequence, one of the scientific research
 challenges in  WSNs, which has  been addressed by  a large amount  of literature
 during the  last few  years, is  the design of  energy efficient  approaches for
 consumption, in  order to  maximize the network  lifetime, represents  the major
 difficulty when designing WSNs. As a consequence, one of the scientific research
 challenges in  WSNs, which has  been addressed by  a large amount  of literature
 during the  last few  years, is  the design of  energy efficient  approaches for

-coverage and connectivity~\cite{conti2014mobile}.   Coverage reflects how well a
+coverage and connectivity~\cite{conti2014mobile}.  Coverage  reflects how well a

 sensor  field is  monitored. On  the one  hand we  want to  monitor the  area of
 sensor  field is  monitored. On  the one  hand we  want to  monitor the  area of

-interest in the most efficient way~\cite{Nayak04}.  On the other hand we want to
-use as less energy as possible.   Sensor nodes are battery-powered with no means
-of recharging or replacing, usually due to environmental (hostile or unpractical
-environments)  or cost  reasons.  Therefore,  it is  desired that  the  WSNs are
-deployed with high densities so as to exploit the overlapping sensing regions of
-some sensor nodes to save energy by  turning off some of them during the sensing
-phase to prolong the network lifetime.
-
-In this  paper we design  a protocol that  focuses on the area  coverage problem
+interest in the most  efficient way~\cite{Nayak04}, \textcolor{blue}{which means
+  that we want to maintain the best coverage as long as possible}.  On the other
+hand  we  want  to  use  as   little  energy  as  possible.   Sensor  nodes  are
+battery-powered  with  no means  of  recharging  or  replacing, usually  due  to
+environmental (hostile or unpractical environments) or cost reasons.  Therefore,
+it is desired  that the WSNs are  deployed with high densities so  as to exploit
+the overlapping sensing  regions of some sensor nodes to  save energy by turning
+off  some   of  them   during  the   sensing  phase   to  prolong   the  network
+lifetime.  \textcolor{blue}{A WSN  can  use  various types  of  sensors such  as
+  \cite{ref17,ref19}:  thermal, seismic,  magnetic, visual,  infrared, acoustic,
+  and  radar.  These  sensors  are   capable  of  observing  different  physical
+  conditions  such  as:  temperature,   humidity,  pressure,  speed,  direction,
+  movement, light,  soil makeup,  noise levels, presence  or absence  of certain
+  kinds  of  objects,   and  mechanical  stress  levels   on  attached  objects.
+  Consequently, there is a wide  range of WSN applications such as~\cite{ref22}:
+  health-care, environment, agriculture, public safety, military, transportation
+  systems, and industry applications.}
+
+In this  paper we design  a protocol that focuses  on the area  coverage problem

 with  the objective  of maximizing  the network  lifetime. Our  proposition, the
 with  the objective  of maximizing  the network  lifetime. Our  proposition, the

-Distributed  Lifetime  Coverage  Optimization  (DILCO) protocol,  maintains  the
+Distributed  Lifetime  Coverage  Optimization (DiLCO)  protocol,  maintains  the

 coverage  and improves  the lifetime  in  WSNs. The  area of  interest is  first
 coverage  and improves  the lifetime  in  WSNs. The  area of  interest is  first

-divided  into subregions using  a divide-and-conquer  algorithm and  an activity
+divided into  subregions using  a divide-and-conquer  algorithm and  an activity

 scheduling  for sensor  nodes is  then  planned by  the elected  leader in  each
 subregion. In fact, the nodes in a subregion can be seen as a cluster where each
 scheduling  for sensor  nodes is  then  planned by  the elected  leader in  each
 subregion. In fact, the nodes in a subregion can be seen as a cluster where each

-node sends sensing data to the  cluster head or the sink node.  Furthermore, the
+node sends sensing data to the cluster  head or the sink node.  Furthermore, the

 activities in a subregion/cluster can continue even if another cluster stops due
 to too many node failures.  Our DiLCO protocol considers periods, where a period
 activities in a subregion/cluster can continue even if another cluster stops due
 to too many node failures.  Our DiLCO protocol considers periods, where a period

-starts with a discovery phase to  exchange information between sensors of a same
-subregion, in order to choose in a suitable manner a sensor node (the leader) to
-carry out the coverage strategy. In each subregion the activation of the sensors
-for the  sensing phase of the current  period is obtained by  solving an integer
-program. The  resulting activation  vector is broadcasted  by a leader  to every
-node of its subregion.
+starts with  a discovery phase  to exchange  information between sensors  of the
+same subregion,  in order  to choose  in a  suitable manner  a sensor  node (the
+leader) to carry out the coverage  strategy. In each subregion the activation of
+the sensors for the  sensing phase of the current period  is obtained by solving
+an integer program.  The resulting activation vector is broadcast by a leader to
+every node of its subregion.
+
+% MODIF - BEGIN
+Our previous  paper ~\cite{idrees2014coverage} relies almost  exclusively on the
+framework of the  DiLCO approach and the coverage problem  formulation.  In this
+paper  we   made  more  realistic   simulations  by  taking  into   account  the
+characteristics of  a Medusa II sensor  ~\cite{raghunathan2002energy} to measure
+the energy consumption and the computation  time.  We have implemented two other
+existing \textcolor{blue}{and distributed approaches} (DESK ~\cite{ChinhVu}, and
+GAF ~\cite{xu2001geography})  in order  to compare  their performances  with our
+approach. \textcolor{blue}{We focus  on DESK and GAF protocols  for two reasons.
+  First our protocol is inspired by both  of them: DiLCO uses a regular division
+  of the  area of interest  as in GAF  and a temporal  division in rounds  as in
+  DESK.  Second, DESK  and GAF are well-known protocols, easy  to implement, and
+  often  used  as references  for  comparison}.  We  also focus  on  performance
+analysis based on the number of subregions.
+% MODIF - END

 
 The remainder  of the  paper continues with  Section~\ref{sec:Literature Review}
 where a  review of some related  works is presented. The  next section describes
 
 The remainder  of the  paper continues with  Section~\ref{sec:Literature Review}
 where a  review of some related  works is presented. The  next section describes

-the  DiLCO  protocol,  followed   in  Section~\ref{cp}  by  the  coverage  model
+the  DiLCO  protocol,  followed  in   Section~\ref{cp}  by  the  coverage  model

 formulation    which    is    used     to    schedule    the    activation    of
 formulation    which    is    used     to    schedule    the    activation    of

-sensors. Section~\ref{sec:Simulation Results  and Analysis} shows the simulation
-results. The paper  ends with conclusions and some  suggestions for further work
+sensors. Section~\ref{sec:Simulation Results and  Analysis} shows the simulation
+results. The paper ends with a  conclusion and some suggestions for further work

 in Section~\ref{sec:Conclusion and Future Works}.
 
 \section{\uppercase{Literature Review}}
 \label{sec:Literature Review}
 
 in Section~\ref{sec:Conclusion and Future Works}.
 
 \section{\uppercase{Literature Review}}
 \label{sec:Literature Review}
 

-\noindent In  this section, we  summarize some related works  regarding coverage
-problem  and distinguish  our DiLCO  protocol from  the works  presented  in the
-literature.
-
-The most discussed coverage  problems in literature
-can  be classified into  three types  \cite{li2013survey}: area  coverage \cite{Misra} where
-every point inside an area is  to be monitored, target coverage  \cite{yang2014novel} where the main
-objective is to  cover only a finite number of  discrete points called targets,
-and  barrier coverage \cite{Kumar:2005}\cite{kim2013maximum} to  prevent intruders  from entering  into the  region of interest. In \cite{Deng2012} authors transform the area coverage problem to the target coverage problem taking into account the intersection points among disks of sensors nodes or between disk of sensor nodes and boundaries. 
-{\it In DiLCO  protocol, the area coverage, i.e. the coverage  of every point in
-  the sensing  region, is transformed  to the coverage  of a fraction  of points
-  called primary points. }
-
+\noindent  In  this section,  we  summarize  some  related works  regarding  the
+coverage problem and distinguish our  DiLCO protocol from the works presented in
+the literature.
+
+The most discussed coverage problems  in literature can be classified into three
+types \cite{li2013survey}:  area coverage \cite{Misra} where  every point inside
+an area is to be  monitored, target coverage \cite{yang2014novel} where the main
+objective is  to cover only a  finite number of discrete  points called targets,
+and barrier coverage \cite{Kumar:2005}\cite{kim2013maximum} to prevent intruders
+from entering into the region  of interest. In \cite{Deng2012} authors transform
+the area coverage problem to the target coverage problem taking into account the
+intersection points among disks of sensors nodes or between disk of sensor nodes
+and boundaries.  {\it In DiLCO protocol, the area coverage, i.e. the coverage of
+  every  point in  the  sensing region,  is  transformed to  the  coverage of  a
+  fraction of points called primary points. }

 
 The major  approach to extend network  lifetime while preserving  coverage is to
 divide/organize the  sensors into a suitable  number of set  covers (disjoint or
 
 The major  approach to extend network  lifetime while preserving  coverage is to
 divide/organize the  sensors into a suitable  number of set  covers (disjoint or

-non-disjoint),  where each  set completely  covers a  region of  interest,  and to
+non-disjoint), where  each set  completely covers a  region of interest,  and to

 activate these set  covers successively. The network activity  can be planned in
 advance and scheduled  for the entire network lifetime  or organized in periods,
 activate these set  covers successively. The network activity  can be planned in
 advance and scheduled  for the entire network lifetime  or organized in periods,

-and the set of  active sensor nodes is decided at the  beginning of each period \cite{ling2009energy}.
-Active node selection is determined based on the problem requirements (e.g. area
-monitoring,  connectivity,  power   efficiency). For instance, Jaggi et al. \cite{jaggi2006}
-address the problem of maximizing network lifetime by dividing sensors into the maximum number of disjoint subsets such that each subset can ensure both coverage and connectivity. A greedy algorithm is applied once to solve this problem and the computed sets are activated in succession to achieve the desired network lifetime. 
-Vu \cite{chin2007}, Padmatvathy et al. \cite{pc10}, propose algorithms working in a periodic fashion where a cover set is computed at the beginning of each period.
-{\it Motivated by these works, DiLCO protocol  works in periods, where each  period contains a preliminary
-  phase  for information  exchange and  decisions, followed  by a  sensing phase
-  where one cover set is in charge of the sensing task.}
-
-Various   approaches,   including   centralized,  or distributed
-algorithms, have been proposed to extend the network lifetime.
-%For instance, in order to hide the occurrence of faults, or the sudden unavailability of
-%sensor nodes, some distributed algorithms have been developed in~\cite{Gallais06,Tian02,Ye03,Zhang05,HeinzelmanCB02}. 
-In       distributed      algorithms~\cite{yangnovel,ChinhVu,qu2013distributed},
-information  is   disseminated  throughout   the  network  and   sensors  decide
-cooperatively by communicating with their neighbors which of them will remain in
-sleep    mode   for    a   certain    period   of    time.     The   centralized
+and the set  of active sensor nodes  is decided at the beginning  of each period
+\cite{ling2009energy}.  Active node selection is determined based on the problem
+requirements  (e.g.  area   monitoring,  connectivity,  power  efficiency).  For
+instance,  Jaggi  et al.  \cite{jaggi2006}  address  the  problem of  maximizing
+network lifetime by dividing sensors into the maximum number of disjoint subsets
+such  that each  subset  can ensure  both  coverage and  connectivity. A  greedy
+algorithm  is applied  once to  solve  this problem  and the  computed sets  are
+activated  in   succession  to  achieve   the  desired  network   lifetime.   Vu
+\cite{chin2007}, Padmatvathy et al. \cite{pc10}, propose algorithms working in a
+periodic fashion where a cover set  is computed at the beginning of each period.
+{\it  Motivated by  these works,  DiLCO protocol  works in  periods,  where each
+  period contains  a preliminary phase  for information exchange  and decisions,
+  followed by a  sensing phase where one  cover set is in charge  of the sensing
+  task.}
+
+Various approaches, including centralized,  or distributed algorithms, have been
+proposed     to    extend    the     network    lifetime.      In    distributed
+algorithms~\cite{yangnovel,ChinhVu,qu2013distributed},       information      is
+disseminated  throughout  the  network   and  sensors  decide  cooperatively  by
+communicating with their neighbors which of them will remain in sleep mode for a
+certain         period         of         time.          The         centralized

 algorithms~\cite{cardei2005improving,zorbas2010solving,pujari2011high}     always
 provide nearly or close to optimal  solution since the algorithm has global view
 of the whole  network. But such a method has the  disadvantage of requiring high
 communication costs,  since the  node (located at  the base station)  making the
 algorithms~\cite{cardei2005improving,zorbas2010solving,pujari2011high}     always
 provide nearly or close to optimal  solution since the algorithm has global view
 of the whole  network. But such a method has the  disadvantage of requiring high
 communication costs,  since the  node (located at  the base station)  making the

-decision needs information from all the sensor nodes in the area and the amount of information can be huge.
-{\it  In order to be suitable for large-scale network,  in the DiLCO  protocol,  the area  coverage  is divided  into several  smaller
-  subregions, and in  each of one, a  node called the leader is  in charge for
+decision needs information from all the  sensor nodes in the area and the amount
+of  information can  be huge.   {\it  In order  to be  suitable for  large-scale
+  network,  in the DiLCO  protocol, the  area coverage  is divided  into several
+  smaller subregions, and in each one, a node called the leader is in charge for

   selecting the active sensors for the current period.}
 
   selecting the active sensors for the current period.}
 

-A large  variety of coverage scheduling  algorithms have been  developed. Many of
+% MODIF - BEGIN
+\textcolor{blue}{ Our approach to select the leader node in a subregion is quite
+  different   from    cluster   head    selection   methods   used    in   LEACH
+  \cite{DBLP:conf/hicss/HeinzelmanCB00}         or          its         variants
+  \cite{ijcses11}. Contrary  to LEACH, the division  of the area of  interest is
+  supposed to be performed before the  leader election. Moreover, we assume that
+  the sensors are deployed almost uniformly  and with high density over the area
+  of interest, such  that the division is  fixed and regular.  As  in LEACH, our
+  protocol works in round fashion.  In each round, during the pre-sensing phase,
+  nodes make autonomous  decisions. In LEACH, each sensor elects  itself to be a
+  cluster head,  and each non-cluster  head will  determine its cluster  for the
+  round. In  our protocol, nodes in  the same subregion select  their leader. In
+  both protocols,  the amount  of remaining  energy in each  node is  taken into
+  account  to promote  the nodes  that have  the most  energy to  become leader.
+  Contrary to  the LEACH protocol  where all sensors  will be active  during the
+  sensing-phase, our protocol  allows to deactivate a subset  of sensors through
+  an optimization process which reduces significantly the energy consumption.}
+% MODIF - END
+
+A large  variety of coverage scheduling  algorithms has been  developed. Many of

 the existing  algorithms, dealing with the  maximization of the  number of cover
 sets, are heuristics.  These heuristics  involve the construction of a cover set
 by including in priority the sensor  nodes which cover critical targets, that is
 the existing  algorithms, dealing with the  maximization of the  number of cover
 sets, are heuristics.  These heuristics  involve the construction of a cover set
 by including in priority the sensor  nodes which cover critical targets, that is

-to  say targets  that  are covered  by  the smallest  number  of sensors \cite{berman04,zorbas2010solving}.  Other
-approaches  are based  on  mathematical programming  formulations~\cite{cardei2005energy,5714480,pujari2011high,Yang2014} and  dedicated
-techniques (solving with a branch-and-bound algorithms available in optimization
-solver).  The problem is formulated  as an optimization problem (maximization of
-the  lifetime  or  number  of  cover  sets) under  target  coverage  and  energy
-constraints.   Column  generation techniques,  well-known  and widely  practiced
-techniques for solving  linear programs with too many  variables, have been also
-used~\cite{castano2013column,rossi2012exact,deschinkel2012column}. {\it  In DiLCO  protocol,  each leader,  in  each subregion,  solves an  integer
-  program with a double objective  consisting in minimizing the overcoverage and
-  limiting  the  undercoverage.  This  program  is inspired  from  the  work  of
-  \cite{pedraza2006}  where the  objective is  to maximize  the number  of cover
-  sets.}
-
-% ***** Part which must be rewritten - Start
-
-% Start of Ali's papers catalog => there's no link between them or with our work
-% (use of subregions; optimization based method; etc.)
-\iffalse
-Diongue  and  Thiare~\cite{diongue2013alarm}  proposed  an  energy  aware  sleep
-scheduling  algorithm  for lifetime  maximization  in  wireless sensor  networks
-(ALARM).  The proposed approach permits to schedule redundant nodes according to
-the weibull distribution.  This work did not analyze the  ALARM scheme under the
-coverage problem.
-
-Shi et al.~\cite{shi2009} modeled the Area Coverage Problem (ACP), which will be
-changed  into a  set coverage  problem. By  using this  model, they  proposed an
-Energy-Efficient central-Scheduling  greedy algorithm, which  can reduces energy
-consumption and increases network lifetime, by selecting a appropriate subset of
-sensor nodes to support the networks periodically.
-
-In ~\cite{chenait2013distributed},  the authors presented  a coverage-guaranteed
-distributed  sleep/wake scheduling  scheme so  ass to  prolong  network lifetime
-while guaranteeing network coverage. This scheme mitigates scheduling process to
-be more stable by avoiding  useless transitions between states without affecting
-the coverage level required by the application.
-
-The work  in~\cite{cheng2014achieving} presented a  unified sensing architecture
-for duty  cycled sensor  networks, called uSense,  which comprises  three ideas:
-Asymmetric Architecture, Generic Switching  and Global Scheduling. The objective
-is to provide a flexible and efficient coverage in sensor networks.
-
-In~\cite{ling2009energy},  the  lifetime  of  a  sensor  node  is  divided  into
-epochs. At  each epoch,  the base station  deduces the current  sensing coverage
-requirement  from application  or user  request. It  then applies  the heuristic
-algorithm in order to produce the set  of active nodes which take the mission of
-sensing during the current epoch.  After  that, the produced schedule is sent to
-the sensor nodes in the network.
-
-% What is the link between the previous work and this paragraph about DiLCO ?
-
-
-
-Yang et al.~\cite{yang2014energy} investigated  full area coverage problem under
-the probabilistic  sensing model in the  sensor networks. They  have studied the
-relationship between the coverage of two adjacent points mathematically and then
-convert  the problem of  full area  coverage into  point coverage  problem. They
-proposed $\varepsilon$-full area coverage optimization (FCO) algorithm to select
-a subset of sensors to provide  probabilistic area coverage dynamically so as to
-extend the network lifetime.
-
-The work proposed by  \cite{qu2013distributed} considers the coverage problem in
-WSNs where  each sensor has variable  sensing radius. The final  objective is to
-maximize the network coverage lifetime in WSNs.
-\fi
-% Same remark, no link with the two previous citations...
-
- 
-% ***** Part which must be rewritten - End
-
-\iffalse
-
-Some algorithms have been developed in ~\cite{yang2014energy,ChinhVu,vashistha2007energy,deschinkel2012column,shi2009,qu2013distributed,ling2009energy,xin2009area,cheng2014achieving,ling2009energy} to solve the area coverage problem so as to preserve coverage and prolong the network lifetime.
-
-
-Yang et al.~\cite{yang2014energy} investigated full area coverage problem
-under the probabilistic sensing model in the sensor networks. They have studied the relationship between the
-coverage of two adjacent points mathematically and then convert the problem of full area coverage into point coverage problem. They proposed $\varepsilon$-full area coverage optimization (FCO) algorithm to select a subset
-of sensors to provide probabilistic area coverage dynamically so as to extend the network lifetime.
-
-
-Vu et al.~\cite{ChinhVu} proposed a localized and distributed greedy algorithm named DESK for generating non-disjoint cover sets which provide the k-area coverage for the whole network. 
-
- 
-Qu et al.~\cite{qu2013distributed} developed a distributed algorithm using  adjustable sensing sensors
-for maintaining the full coverage of such sensor networks. The
-algorithm contains two major parts: the first part aims at
-providing $100\%$ coverage and the second part aims at saving
-energy by decreasing the sensing radius.
-
-Shi et al.~\cite{shi2009} modeled the Area Coverage Problem (ACP), which will be changed into a set coverage
-problem. By using this model, they are proposed  an  Energy-Efficient central-Scheduling greedy algorithm, which can reduces energy consumption and increases network lifetime, by selecting a appropriate subset of sensor nodes to support the networks periodically. 
-
-The work in~\cite{cheng2014achieving} presented a unified sensing architecture for duty cycled sensor networks, called uSense, which comprises three ideas: Asymmetric Architecture, Generic Switching and Global Scheduling. The objective is to  provide a flexible and efficient coverage in sensor networks.
-
- In~\cite{ling2009energy}, the lifetime of
-a sensor node is divided into epochs. At each epoch, the
-base station deduces the current sensing coverage requirement
-from application or user request. It then applies the heuristic algorithm in order to produce the set of active nodes which take the mission of sensing during the current epoch.  After that, the produced schedule is sent to the sensor nodes in the network. 
-\fi
-
-\iffalse
-
-The work in ~\cite{vu2009delaunay} considered the area coverage problem for variable sensing radii in WSNs by improving the energy balancing heuristic proposed in ~\cite{wang2007energy} so that  the area of interest can be full covered using Delaunay triangulation structure.
-
-Diongue and Thiare~\cite{diongue2013alarm} proposed an energy aware sleep scheduling algorithm for lifetime maximization in wireless sensor networks (ALARM).  The proposed approach permits to schedule redundant nodes according to the weibull distribution. This work did not analyze the ALARM scheme under the coverage problem. 
- 
-
-In~\cite{xin2009area}, the authors proposed a circle intersection localized coverage algorithm
-to maintain connectivity  based  on loose connectivity critical condition
-. By using the connected coverage node set, it can maintain network
-connection in the case which loose condition is not meet.
-The authors in ~\cite{vashistha2007energy} addressed the full area coverage problem using information
-coverage. They are proposed a low-complexity heuristic algorithm to obtain full area information covers (FAIC), which they refer to as Grid Based FAIC (GB-FAIC) algorithm. Using these FAICs, they are obtained the optimal schedule for applying the sensing activity of sensor nodes  in order to
-achieve increased sensing lifetime of the network. 
-
-
-
-  
-
-
-In \cite{xu2001geography}, Xu et al. proposed a Geographical Adaptive Fidelity (GAF) algorithm, which uses geographic location information to divide the area of interest into fixed square grids. Within each grid, it keeps only one node staying awake to take the responsibility of sensing and communication.
-
-The main contributions of our DiLCO Protocol can be summarized as follows:
-(1) The distributed optimization over the subregions in the area of interest, 
-(2) The distributed dynamic leader election at each period by each sensor node in the subregion, 
-(3) The primary point coverage model to represent each sensor node in the network, 
-(4) The activity scheduling based optimization on the subregion, which are based on  the primary point coverage model to activate as less number as possible of sensor nodes  to take the mission of the coverage in each subregion, and (5) The improved energy consumption model.
-\fi
-\iffalse
-The work presented in~\cite{luo2014parameterized,tian2014distributed} tries to solve the target coverage problem so as to extend the network lifetime since it is easy to verify the coverage status of discreet target.
-%Je ne comprends pas la phrase ci-dessus
-The work proposed in~\cite{kim2013maximum} considers the barrier-coverage problem in WSNs. The final goal is to maximize the network lifetime such that any penetration of the intruder is detected.
-%inutile de parler de ce papier car il concerne barrier coverage
-In \cite{ChinhVu},  the authors propose a localized and distributed greedy algorithm named DESK for generating non-disjoint cover sets which provide the k-coverage for the whole network. 
-Our Work in~\cite{idrees2014coverage} proposes a coverage optimization protocol to improve the lifetime in heterogeneous energy wireless sensor networks. In this work, the coverage protocol distributed in each sensor node in the subregion but the optimization take place over the the whole subregion. We are considered only distributing the coverage protocol over two subregions.  
-
-The work presented in ~\cite{Zhang} focuses on a distributed clustering method, which aims to extend the network lifetime, while the coverage is ensured.
-
-The work proposed by \cite{qu2013distributed} considers the coverage problem in WSNs where each sensor has variable sensing radius. The final objective is to maximize the network coverage lifetime in WSNs.
-
-
-
-Casta{\~n}o et al.~\cite{castano2013column} proposed a multilevel approach based on column generation (CG) to  extend the network lifetime with connectivity and coverage constraints. They are included  two heuristic methods  within the CG framework so as to accelerate the solution process. 
-In \cite{diongue2013alarm}, diongue is proposed an energy Aware sLeep scheduling AlgoRithm for lifetime maximization in WSNs (ALARM) algorithm for coverage lifetime maximization in wireless sensor networks. ALARM is sensor node scheduling approach for lifetime maximization in WSNs in which it schedule redundant nodes according to the weibull distribution  taking into consideration frequent nodes failure.
-Yu et al.~\cite{yu2013cwsc} presented a connected k-coverage working sets construction
-approach (CWSC) to maintain k-coverage and connectivity. This approach try to select the minimum number of connected sensor nodes that can provide k-coverage ($k \geq 1$).
-In~\cite{cheng2014achieving}, the authors are presented a unified sensing architecture for duty cycled sensor networks, called uSense, which comprises three ideas: Asymmetric Architecture, Generic Switching and Global Scheduling. The objective is to  provide a flexible and efficient coverage in sensor networks.
-
-In~\cite{yang2013energy}, the authors are investigated full area coverage problem
-under the probabilistic sensing model in the sensor networks. %They are designed $\varepsilon-$full area coverage optimization (FCO) algorithm to select a subset of sensors to provide probabilistic area coverage dynamically so as to extend the network lifetime.
-In \cite{xu2001geography}, Xu et al. proposed a Geographical Adaptive Fidelity (GAF) algorithm, which uses geographic location information to divide the area of interest into fixed square grids. Within each grid, it keeps only one node staying awake to take the responsibility of sensing and communication.
-
-The main contributions of our DiLCO Protocol can be summarized as follows:
-(1) The distributed optimization over the subregions in the area of interest, 
-(2) The distributed dynamic leader election at each round by each sensor node in the subregion, 
-(3) The primary point coverage model to represent each sensor node in the network, 
-(4) The activity scheduling based optimization on the subregion, which are based on  the primary point coverage model to activate as less number as possible of sensor nodes  to take the mission of the coverage in each subregion,
-(5) The improved energy consumption model.
-
-\fi
+to  say   targets  that   are  covered  by   the  smallest  number   of  sensors
+\cite{berman04,zorbas2010solving}.  Other  approaches are based  on mathematical
+programming formulations~\cite{cardei2005energy,5714480,pujari2011high,Yang2014}
+and dedicated  techniques (solving with a  branch-and-bound algorithms available
+in optimization solver).   The problem is formulated as  an optimization problem
+(maximization of the lifetime or number of cover sets) under target coverage and
+energy  constraints.   Column   generation  techniques,  well-known  and  widely
+practiced techniques for  solving linear programs with too  many variables, have
+also                                                                        been
+used~\cite{castano2013column,rossi2012exact,deschinkel2012column}. {\it In DiLCO
+  protocol, each  leader, in  each subregion, solves  an integer program  with a
+  double objective  consisting in minimizing  the overcoverage and  limiting the
+  undercoverage.  This  program is inspired from the  work of \cite{pedraza2006}
+  where the objective is to maximize the number of cover sets.}

 
 \section{\uppercase{Description of the DiLCO protocol}}
 \label{sec:The DiLCO Protocol Description}
 
 \section{\uppercase{Description of the DiLCO protocol}}
 \label{sec:The DiLCO Protocol Description}


@@ -326,27 +246,12 @@ on  each subregion  in  the area  of interest.   It  is based  on two  efficient
 techniques: network leader election  and sensor activity scheduling for coverage
 preservation  and  energy  conservation,  applied  periodically  to  efficiently
 maximize the lifetime in the network.
 techniques: network leader election  and sensor activity scheduling for coverage
 preservation  and  energy  conservation,  applied  periodically  to  efficiently
 maximize the lifetime in the network.

-\iffalse  The main  features of  our DiLCO  protocol: i)It  divides the  area of
-interest  into subregions  by using  divide-and-conquer concept,  ii)It requires
-only the  information of  the nodes  within the subregion,  iii) it  divides the
-network lifetime into rounds, iv)It based on the autonomous distributed decision
-by  the nodes in  the subregion  to elect  the Leader,  v)It apply  the activity
-scheduling  based optimization  on  the  subregion, vi)  it  achieves an  energy
-consumption balancing  among the nodes  in the subregion by  selecting different
-nodes as a leader during the  network lifetime, vii) It uses the optimization to
-select the best  representative set of sensors in the  subregion by optimize the
-coverage and the  lifetime over the area of interest,  viii)It uses our proposed
-primary point coverage model, which represent the sensing range of the sensor as
-a set of points, which are used by the our optimization algorithm, ix) It uses a
-simple  energy model that  takes communication,  sensing and  computation energy
-consumptions into account to evaluate the performance of our protocol. 
-\fi

 
 \subsection{Assumptions and models}
 
 \noindent  We consider  a sensor  network composed  of static  nodes distributed
 independently and uniformly at random.  A high density deployment ensures a high
 
 \subsection{Assumptions and models}
 
 \noindent  We consider  a sensor  network composed  of static  nodes distributed
 independently and uniformly at random.  A high density deployment ensures a high

-coverage ratio of the interested area at the starting. The nodes are supposed to
+coverage ratio of the interested area at the start. The nodes are supposed to

 have homogeneous characteristics from a  communication and a processing point of
 view, whereas they  have heterogeneous energy provisions.  Each  node has access
 to its location thanks,  either to a hardware component (like a  GPS unit), or a
 have homogeneous characteristics from a  communication and a processing point of
 view, whereas they  have heterogeneous energy provisions.  Each  node has access
 to its location thanks,  either to a hardware component (like a  GPS unit), or a


@@ -357,7 +262,7 @@ sensor coverage  model in the  literature. Thus, since  a sensor has  a constant
 sensing range $R_s$, every space points  within a disk centered at a sensor with
 the radius of  the sensing range is said  to be covered by this  sensor. We also
 assume  that  the communication  range  $R_c \geq  2R_s$.   In  fact, Zhang  and
 sensing range $R_s$, every space points  within a disk centered at a sensor with
 the radius of  the sensing range is said  to be covered by this  sensor. We also
 assume  that  the communication  range  $R_c \geq  2R_s$.   In  fact, Zhang  and

-Zhou~\cite{Zhang05} proved that if  the transmission range fulfills the previous
+Hou~\cite{Zhang05} proved  that if the transmission range  fulfills the previous

 hypothesis, a complete coverage of  a convex area implies connectivity among the
 working nodes in the active mode.
 
 hypothesis, a complete coverage of  a convex area implies connectivity among the
 working nodes in the active mode.
 


@@ -368,56 +273,13 @@ corresponding to  a sensor node is covered  by its neighboring nodes  if all its
 primary points are covered. Obviously,  the approximation of coverage is more or
 less accurate according to the number of primary points.
 
 primary points are covered. Obviously,  the approximation of coverage is more or
 less accurate according to the number of primary points.
 

-\iffalse
-By  knowing the  position (point  center: ($p_x,p_y$))  of  a wireless
-sensor node  and its $R_s$,  we calculate the primary  points directly
-based on the proposed model. We  use these primary points (that can be
-increased or decreased if necessary)  as references to ensure that the
-monitored  region  of interest  is  covered  by  the selected  set  of
-sensors, instead of using all the points in the area.
-
-\indent  We can  calculate  the positions of the selected primary
-points in the circle disk of the sensing range of a wireless sensor
-node (see figure~\ref{fig1}) as follows:\\
-$(p_x,p_y)$ = point center of wireless sensor node\\  
-$X_1=(p_x,p_y)$ \\ 
-$X_2=( p_x + R_s * (1), p_y + R_s * (0) )$\\           
-$X_3=( p_x + R_s * (-1), p_y + R_s * (0)) $\\
-$X_4=( p_x + R_s * (0), p_y + R_s * (1) )$\\
-$X_5=( p_x + R_s * (0), p_y + R_s * (-1 )) $\\
-$X_6= ( p_x + R_s * (\frac{-\sqrt{2}}{2}), p_y + R_s * (0)) $\\
-$X_7=( p_x + R_s *  (\frac{\sqrt{2}}{2}), p_y + R_s * (0))$\\
-$X_8=( p_x + R_s * (\frac{-\sqrt{2}}{2}), p_y + R_s * (\frac{-\sqrt{2}}{2})) $\\
-$X_9=( p_x + R_s * (\frac{\sqrt{2}}{2}), p_y + R_s * (\frac{-\sqrt{2}}{2})) $\\
-$X_{10}=( p_x + R_s * (\frac{-\sqrt{2}}{2}), p_y + R_s * (\frac{\sqrt{2}}{2})) $\\
-$X_{11}=( p_x + R_s * (\frac{\sqrt{2}}{2}), p_y + R_s * (\frac{\sqrt{2}}{2})) $\\
-$X_{12}=( p_x + R_s * (0), p_y + R_s * (\frac{\sqrt{2}}{2})) $\\
-$X_{13}=( p_x + R_s * (0), p_y + R_s * (\frac{-\sqrt{2}}{2})) $.
-
- \begin{figure}[h!]
-\centering
- \begin{multicols}{3}
-\centering
-%\includegraphics[scale=0.20]{fig21.pdf}\\~ ~ ~ ~ ~(a)
-%\includegraphics[scale=0.20]{fig22.pdf}\\~ ~ ~ ~ ~(b)
-\includegraphics[scale=0.25]{principles13.pdf}%\\~ ~ ~ ~ ~(c)
-%\includegraphics[scale=0.10]{fig25.pdf}\\~ ~ ~(d)
-%\includegraphics[scale=0.10]{fig26.pdf}\\~ ~ ~(e)
-%\includegraphics[scale=0.10]{fig27.pdf}\\~ ~ ~(f)
-\end{multicols} 
-\caption{Wireless Sensor Node represented by 13 primary points}
-%\caption{Wireless Sensor Node represented by (a)5, (b)9 and (c)13 primary points respectively}
-\label{fig1}
-\end{figure}
-
-\fi
-

 \subsection{Main idea}
 \label{main_idea}
 \subsection{Main idea}
 \label{main_idea}

-

 \noindent We start  by applying a divide-and-conquer algorithm  to partition the
 area of interest  into smaller areas called subregions and  then our protocol is
 \noindent We start  by applying a divide-and-conquer algorithm  to partition the
 area of interest  into smaller areas called subregions and  then our protocol is

-executed   simultaneously  in   each   subregion.
+executed  simultaneously in  each subregion.  \textcolor{blue}{Sensor nodes  are
+  assumed to be deployed almost uniformly over the region and the subdivision of
+  the area of interest is regular.}

 
 \begin{figure}[ht!]
 \centering
 
 \begin{figure}[ht!]
 \centering


@@ -428,27 +290,28 @@ executed   simultaneously  in   each   subregion.
 
 As  shown  in Figure~\ref{fig2},  the  proposed  DiLCO  protocol is  a  periodic
 protocol where  each period is  decomposed into 4~phases:  Information Exchange,
 
 As  shown  in Figure~\ref{fig2},  the  proposed  DiLCO  protocol is  a  periodic
 protocol where  each period is  decomposed into 4~phases:  Information Exchange,

-Leader Election,  Decision, and Sensing. For each period  there will be exactly
+Leader Election,  Decision, and Sensing. For  each period there  will be exactly

 one  cover  set  in charge  of  the  sensing  task.   A periodic  scheduling  is
 one  cover  set  in charge  of  the  sensing  task.   A periodic  scheduling  is

-interesting  because it  enhances the  robustness  of the  network against  node
-failures. First,  a node  that has not  enough energy  to complete a  period, or
+interesting  because it  enhances the  robustness  of the  network against  node failures.
+% \textcolor{blue}{Many WSN applications have communication requirements that are periodic and known previously such as collecting temperature statistics at regular intervals. This periodic nature can be used to provide a regular schedule to sensor nodes and thus avoid a sensor failure. If the period time increases, the reliability and energy consumption are decreased and vice versa}. 
+First,  a node  that has not  enough energy  to complete a  period, or

 which fails before  the decision is taken, will be  excluded from the scheduling
 process. Second,  if a node  fails later, whereas  it was supposed to  sense the
 which fails before  the decision is taken, will be  excluded from the scheduling
 process. Second,  if a node  fails later, whereas  it was supposed to  sense the

-region  of interest,  it will  only  affect the  quality of  coverage until  the
-definition of a new cover set  in the next period.  Constraints, like the energy
+region of  interest, it will only affect  the quality of the  coverage until the
+definition of  a new  cover set  in the next  period.  Constraints,  like energy

 consumption, can be easily taken into consideration since the sensors can update
 and exchange their  information during the first phase.  Let  us notice that the
 phases  before  the sensing  one  (Information  Exchange,  Leader Election,  and
 Decision) are  energy consuming for all the  nodes, even nodes that  will not be
 retained by the leader to keep watch over the corresponding area.
 
 consumption, can be easily taken into consideration since the sensors can update
 and exchange their  information during the first phase.  Let  us notice that the
 phases  before  the sensing  one  (Information  Exchange,  Leader Election,  and
 Decision) are  energy consuming for all the  nodes, even nodes that  will not be
 retained by the leader to keep watch over the corresponding area.
 

-During the execution of the DiLCO protocol, two kinds of packets will be used:
+During the execution of the DiLCO protocol, two kinds of packet will be used:

 %\begin{enumerate}[(a)]
 \begin{itemize} 
 \item INFO  packet: sent  by each  sensor node to  all the  nodes inside  a same
   subregion for information exchange.
 \item ActiveSleep packet:  sent by the leader to all the  nodes in its subregion
 %\begin{enumerate}[(a)]
 \begin{itemize} 
 \item INFO  packet: sent  by each  sensor node to  all the  nodes inside  a same
   subregion for information exchange.
 \item ActiveSleep packet:  sent by the leader to all the  nodes in its subregion

-  to inform them to be stay Active or to go Sleep during the sensing phase.
+  to inform them to stay Active or to go Sleep during the sensing phase.

 \end{itemize}
 %\end{enumerate}
 and each sensor node will have five possible status in the network:
 \end{itemize}
 %\end{enumerate}
 and each sensor node will have five possible status in the network:


@@ -462,74 +325,40 @@ and each sensor node will have five possible status in the network:
 \end{itemize}
 %\end{enumerate}
 
 \end{itemize}
 %\end{enumerate}
 

-An outline of the  protocol implementation is given by Algorithm~\ref{alg:DiLCO}
+An outline of the protocol  implementation is given by Algorithm~\ref{alg:DiLCO}

 which describes  the execution of  a period  by a node  (denoted by $s_j$  for a
 which describes  the execution of  a period  by a node  (denoted by $s_j$  for a

-sensor  node indexed by  $j$). At  the beginning  a node  checks whether  it has
-enough energy to stay active during the next sensing phase. If yes, it exchanges
-information  with  all the  other  nodes belonging  to  the  same subregion:  it
-collects from each node its position coordinates, remaining energy ($RE_j$), ID,
-and  the number  of  one-hop neighbors  still  alive. Once  the  first phase  is
-completed, the nodes  of a subregion choose a leader to  take the decision based
-on  the  following  criteria   with  decreasing  importance:  larger  number  of
-neighbors, larger remaining energy, and  then in case of equality, larger index.
-After that,  if the sensor node is  leader, it will execute  the integer program
-algorithm (see Section~\ref{cp})  which provides a set of  sensors planned to be
-active in the next sensing phase. As leader, it will send an Active-Sleep packet
-to each sensor  in the same subregion to  indicate it if it has to  be active or
-not.  Alternately, if  the  sensor  is not  the  leader, it  will  wait for  the
-Active-Sleep packet to know its state for the coming sensing phase.
-
-\iffalse
-\subsubsection{Information Exchange Phase}
-
-Each sensor node $j$ sends its position, remaining energy $RE_j$, and
-the number of neighbors  $NBR_j$ to all wireless sensor nodes in
-its subregion by using an INFO packet and then listens to the packets
-sent from  other nodes.  After that, each  node will  have information
-about  all the  sensor  nodes in  the  subregion.  In  our model,  the
-remaining energy corresponds to the time that a sensor can live in the
-active mode.
-
-\subsubsection{Leader Election Phase}
-This  step includes choosing  the Wireless  Sensor Node  Leader (WSNL),
-which  will  be  responsible  for executing  the coverage  algorithm.  Each
-subregion  in  the   area  of  interest  will  select   its  own  WSNL
-independently  for each  round.  All the  sensor  nodes cooperate  to
-select WSNL.  The nodes in the  same subregion will  select the leader
-based on  the received  information from all  other nodes in  the same
-subregion.  The selection criteria  in order  of priority  are: larger
-number  of neighbors,  larger remaining  energy, and  then in  case of
-equality, larger index. 
-
-\subsubsection{Decision phase}
-The  WSNL will  solve an  integer  program (see  section~\ref{cp})  to
-select which sensors will be  activated in the following sensing phase
-to cover  the subregion.  WSNL will send  Active-Sleep packet  to each
-sensor in the subregion based on the algorithm's results.
-
-
-\subsubsection{Sensing phase}
-
-Active sensors in the round will  execute their sensing task to preserve maximal
-coverage in the  region of interest. We  will assume that the cost  of keeping a
-node awake  (or asleep)  for sensing task  is the  same for all  wireless sensor
-nodes in the network.  Each sensor will receive an Active-Sleep packet from WSNL
-informing it to stay  awake or to go to sleep for a time  equal to the period of
-sensing until starting a new round.  Algorithm 1, which will be executed by each
-node  at the  beginning of  a  round, explains  how the  Active-Sleep packet  is
-obtained.
-
-\fi
-
-
-\iffalse
-\subsection{DiLCO protocol Algorithm}
-we  first show  the pseudo-code  of DiLCO  protocol, which  is executed  by each
-sensor in the subregion and then describe it in more detail.  \fi
+sensor node  indexed by  $j$). At  the beginning  a node  checks whether  it has
+enough  energy  \textcolor{blue}{(its energy  should  be  greater than  a  fixed
+  treshold $E_{th}$)} to  stay active during the next sensing  phase. If yes, it
+exchanges information with all the other  nodes belonging to the same subregion:
+it collects from each node  its position coordinates, remaining energy ($RE_j$),
+ID,  and the  number of  one-hop neighbors  still alive.   \textcolor{blue}{INFO
+  packet contains two parts: header and  data payload. The sensor ID is included
+  in  the header,  where the  header  size is  8  bits. The  data part  includes
+  position coordinates (64 bits), remaining energy  (32 bits), and the number of
+  one-hop live neighbors (8 bits). Therefore the  size of the INFO packet is 112
+  bits.} Once the  first phase is completed,  the nodes of a  subregion choose a
+leader to  take the  decision based  on the  following criteria  with decreasing
+importance: larger  number of  neighbors, larger remaining  energy, and  then in
+case of equality,  larger index.  After that,  if the sensor node  is leader, it
+will  solve an  integer program  (see Section~\ref{cp}).   \textcolor{blue}{This
+  integer program  contains boolean variables  $X_j$ where ($X_j=1$)  means that
+  sensor $j$ will be active in the  next sensing phase. Only sensors with enough
+  remaining energy are  involved in the integer  program ($J$ is the  set of all
+  sensors  involved).  As  the  leader consumes  energy  (computation energy  is
+  denoted by $E^{comp}$) to solve the  optimization problem, it will be included
+  in the integer program only if it has enough energy to achieve the computation
+  and to  stay alive during the  next sensing phase, that  is to say if  $RE_j >
+  E^{comp}+E_{th}$. Once  the optimization problem  is solved, each  leader will
+  send an ActiveSleep packet to each sensor in the same subregion to indicate it
+  if it has to be active or not.  Otherwise, if the sensor is not the leader, it
+  will wait for the ActiveSleep packet to  know its state for the coming sensing
+  phase.}
+%which provides a set of  sensors planned to be
+%active in the next sensing phase.

 
 \begin{algorithm}[h!]                
 
 \begin{algorithm}[h!]                

- % \KwIn{all the parameters related to information exchange}
-%  \KwOut{$winer-node$ (: the id of the winner sensor node, which is the leader of current round)}
+

   \BlankLine
   %\emph{Initialize the sensor node and determine it's position and subregion} \; 
   
   \BlankLine
   %\emph{Initialize the sensor node and determine it's position and subregion} \; 
   


@@ -553,7 +382,7 @@ sensor in the subregion and then describe it in more detail.  \fi
       \Else{
         \emph{$s_j.status$ = LISTENING}\;
         \emph{Wait $ActiveSleep()$ packet from the Leader}\;
       \Else{
         \emph{$s_j.status$ = LISTENING}\;
         \emph{Wait $ActiveSleep()$ packet from the Leader}\;

-        % \emph{After receiving Packet, Retrieve the schedule and the $T$ rounds}\;
+

         \emph{Update $RE_j $}\;
       }  
       %  }
         \emph{Update $RE_j $}\;
       }  
       %  }


@@ -566,18 +395,70 @@ sensor in the subregion and then describe it in more detail.  \fi
 
 \end{algorithm}
 
 
 \end{algorithm}
 

-\iffalse
-The DiLCO protocol work in rounds and executed at each sensor node in the network, each sensor node can still sense data while being in
-LISTENING mode. Thus, by entering the LISTENING mode at the beginning of each round,
-sensor nodes still executing sensing task while participating in the leader election and decision phases. More specifically, The DiLCO protocol algorithm works as follow: 
-Initially, the sensor node check it's remaining energy in order to participate in the current round. Each sensor node determines it's position and it's subregion based Embedded GPS  or Location Discovery Algorithm. After that, All the sensors collect position coordinates, current remaining energy, sensor node id, and the number of its one-hop live neighbors during the information exchange. It stores this information into a list L.
-The sensor node enter in listening mode waiting to receive ActiveSleep packet from the leader to take the decision. Each sensor node will execute the Algorithm~1 to know who is the leader. After that, if the sensor node is leader, It will execute the integer program algorithm ( see section~\ref{cp}) to optimize the coverage and the lifetime in it's subregion. After the decision, the optimization approach will select the set of sensor nodes to take the mission of coverage during the sensing phase. The leader will send ActiveSleep packet to each sensor node in the subregion to inform him to it's status during the period of sensing, either Active or sleep until the starting of next round. Based on the decision, the leader as other nodes in subregion, either go to be active or go to be sleep during current sensing phase. the other nodes in the same subregion will stay in listening mode waiting the ActiveSleep packet from the leader. After finishing the time period for sensing, all the sensor nodes in the same subregion will start new round by executing the DiLCO protocol and the lifetime in the subregion will continue until all the sensor nodes are died or the network becomes disconnected in the subregion.
-\fi
-
-

 \section{\uppercase{Coverage problem formulation}}
 \label{cp}
 
 \section{\uppercase{Coverage problem formulation}}
 \label{cp}
 

+% MODIF - BEGIN
+We formulate the coverage optimization problem with an integer program.
+The objective function consists in minimizing the undercoverage and the overcoverage of the area as suggested in \cite{pedraza2006}. 
+The area coverage problem is expressed as the coverage of a fraction of points called primary points. 
+Details on the choice and the number of primary points can be found in \cite{idrees2014coverage}. The set of primary points is denoted by $P$
+and the set of alive sensors by $J$. As we consider a boolean disk coverage model, we use the boolean indicator $\alpha_{jp}$ which is equal to 1 if the primary point $p$ is in the sensing range of the sensor $j$. The binary variable $X_j$ represents the activation or not of the sensor $j$. So we can express the number of  active sensors  that cover  the primary  point $p$ by $\sum_{j \in J} \alpha_{jp} * X_{j}$. We deduce the overcoverage denoted by $\Theta_p$ of the primary point $p$ :
+\begin{equation}
+ \Theta_{p} = \left \{ 
+\begin{array}{l l}
+  0 & \mbox{if the primary point}\\
+    & \mbox{$p$ is not covered,}\\
+  \left( \sum_{j \in J} \alpha_{jp} * X_{j} \right)- 1 & \mbox{otherwise.}\\
+\end{array} \right.
+\label{eq13} 
+\end{equation}
+More  precisely, $\Theta_{p}$ represents  the number of  active sensor
+nodes minus  one that  cover the primary  point~$p$.
+In the same way, we define the  undercoverage variable
+$U_{p}$ of the primary point $p$ as:
+\begin{equation}
+U_{p} = \left \{ 
+\begin{array}{l l}
+  1 &\mbox{if the primary point $p$ is not covered,} \\
+  0 & \mbox{otherwise.}\\
+\end{array} \right.
+\label{eq14} 
+\end{equation}
+There is, of course, a relationship between the three variables $X_j$, $\Theta_p$, and $U_p$ which can be formulated as follows :
+\begin{equation}
+\sum_{j \in J}  \alpha_{jp} X_{j} - \Theta_{p}+ U_{p} =1, \forall p \in P
+\end{equation}
+If the point $p$ is not covered, $U_p=1$,  $\sum_{j \in J}  \alpha_{jp} X_{j}=0$ and $\Theta_{p}=0$ by definition, so the equality is satisfied.
+On the contrary, if the point $p$ is covered, $U_p=0$, and $\Theta_{p}=\left( \sum_{j \in J} \alpha_{jp}  X_{j} \right)- 1$. 
+\noindent Our coverage optimization problem can then be formulated as follows:
+\begin{equation} \label{eq:ip2r}
+\left \{
+\begin{array}{ll}
+\min \sum_{p \in P} (w_{\theta} \Theta_{p} + w_{U} U_{p})&\\
+\textrm{subject to :}&\\
+\sum_{j \in J}  \alpha_{jp} X_{j} - \Theta_{p}+ U_{p} =1, &\forall p \in P\\
+%\label{c1} 
+%\sum_{t \in T} X_{j,t} \leq \frac{RE_j}{e_t} &\forall j \in J \\
+%\label{c2}
+\Theta_{p}\in \mathbb{N}, &\forall p \in P\\
+U_{p} \in \{0,1\}, &\forall p \in P \\
+X_{j} \in \{0,1\}, &\forall j \in J
+\end{array}
+\right.
+\end{equation}
+The objective function is a weighted sum of overcoverage and undercoverage. The goal is to limit the overcoverage in order to activate a minimal number of sensors while simultaneously preventing undercoverage.  \textcolor{blue}{ By
+    choosing  $w_{U}$ much  larger than $w_{\theta}$,  the coverage  of a
+    maximum of  primary points  is ensured.  Then for the  same number  of covered
+    primary points,  the solution  with a  minimal number  of active  sensors is
+    preferred. }
+%Both  weights $w_\theta$  and $w_U$ must  be carefully  chosen in
+%order to  guarantee that the  maximum number of  points are covered  during each
+%period.
+% MODIF - END
+
+\iffalse 
+

 \indent Our model is based on the model proposed by \cite{pedraza2006} where the
 objective is  to find a  maximum number of  disjoint cover sets.   To accomplish
 this goal,  the authors proposed  an integer program which  forces undercoverage
 \indent Our model is based on the model proposed by \cite{pedraza2006} where the
 objective is  to find a  maximum number of  disjoint cover sets.   To accomplish
 this goal,  the authors proposed  an integer program which  forces undercoverage


@@ -666,6 +547,8 @@ undercoverage. Both  weights $w_\theta$  and $w_U$ must  be carefully  chosen in
 order to  guarantee that the  maximum number of  points are covered  during each
 period.
 
 order to  guarantee that the  maximum number of  points are covered  during each
 period.
 

+\fi
+

 \section{\uppercase{Protocol evaluation}}  
 \label{sec:Simulation Results and Analysis}
 \noindent \subsection{Simulation framework}
 \section{\uppercase{Protocol evaluation}}  
 \label{sec:Simulation Results and Analysis}
 \noindent \subsection{Simulation framework}


@@ -726,7 +609,7 @@ node typically  consists of  four units: a  MicroController Unit, an  Atmels AVR
 ATmega103L in  case of Medusa II,  to perform the  computations; a communication
 (radio) unit able to send and  receive messages; a sensing unit to collect data;
 a power supply  which provides the energy consumed by  node. Except the battery,
 ATmega103L in  case of Medusa II,  to perform the  computations; a communication
 (radio) unit able to send and  receive messages; a sensing unit to collect data;
 a power supply  which provides the energy consumed by  node. Except the battery,

-all the other unit  can be be switched off to save  energy according to the node
+all the other unit  can be switched off to save  energy according to the node

 status.   Table~\ref{table4} summarizes  the energy  consumed (in  milliWatt per
 second) by a node for each of its possible status.
 
 status.   Table~\ref{table4} summarizes  the energy  consumed (in  milliWatt per
 second) by a node for each of its possible status.
 


@@ -772,17 +655,17 @@ receive such  packets, we  use the equation  giving the  energy spent to  send a
 1-bit-content   message  defined   in~\cite{raghunathan2002energy}   (we  assume
 symmetric  communication costs), and  we set  their respective  size to  112 and
 24~bits. The energy required to send  or receive a 1-bit-content message is thus
 1-bit-content   message  defined   in~\cite{raghunathan2002energy}   (we  assume
 symmetric  communication costs), and  we set  their respective  size to  112 and
 24~bits. The energy required to send  or receive a 1-bit-content message is thus

-is equal to 0.2575 mW.
-
-Each node has an initial energy level, in Joules, which is randomly drawn in the
-interval  $[500-700]$.  If  its  energy  provision reaches  a  value below  the
-threshold  $E_{th}=36$~Joules, the  minimum energy  needed  for a  node to  stay
-active during one period, it will no more participate in the coverage task. This
-value  corresponds  to the  energy  needed by  the  sensing  phase, obtained  by
-multiplying the energy consumed in active  state (9.72 mW) by the time in seconds
-for one period (3600 seconds), and  adding the energy for the pre-sensing phases.
+ equal to 0.2575~mW.
+
+Each node  has an initial  energy level, in  Joules, which is randomly  drawn in
+$[500-700]$.   If its  energy  provision  reaches a  value  below the  threshold
+$E_{th}=36$~Joules, the minimum  energy needed for a node  to stay active during
+one  period, it  will  no longer  take part  in  the coverage  task. This  value
+corresponds to the  energy needed by the sensing  phase, obtained by multiplying
+the energy  consumed in active state  (9.72 mW) by  the time in seconds  for one
+period  (3,600 seconds),  and  adding  the energy  for  the pre-sensing  phases.

 According to  the interval of initial energy,  a sensor may be  active during at
 According to  the interval of initial energy,  a sensor may be  active during at

-most 20 rounds.
+most 20 periods.

 
 In the simulations,  we introduce the following performance  metrics to evaluate
 the efficiency of our approach:
 
 In the simulations,  we introduce the following performance  metrics to evaluate
 the efficiency of our approach:


@@ -798,8 +681,7 @@ the efficiency of our approach:
   connectivity  is crucial because  an active  sensor node  without connectivity
   towards a base  station cannot transmit any information  regarding an observed
   event in the area that it monitors.
   connectivity  is crucial because  an active  sensor node  without connectivity
   towards a base  station cannot transmit any information  regarding an observed
   event in the area that it monitors.

-  
-    
+     

 \item {{\bf Coverage Ratio (CR)}:} it measures how well the WSN is able to 
   observe the area of interest. In our case, we discretized the sensor field
   as a regular grid, which yields the following equation to compute the
 \item {{\bf Coverage Ratio (CR)}:} it measures how well the WSN is able to 
   observe the area of interest. In our case, we discretized the sensor field
   as a regular grid, which yields the following equation to compute the


@@ -809,30 +691,13 @@ the efficiency of our approach:
 \mbox{CR}(\%) = \frac{\mbox{$n$}}{\mbox{$N$}} \times 100.
 \end{equation*}
 where  $n$ is  the number  of covered  grid points  by active  sensors  of every
 \mbox{CR}(\%) = \frac{\mbox{$n$}}{\mbox{$N$}} \times 100.
 \end{equation*}
 where  $n$ is  the number  of covered  grid points  by active  sensors  of every

-subregions during  the current  sensing phase  and $N$ is  total number  of grid
+subregions during  the current  sensing phase  and $N$ is the total number  of grid

 points in  the sensing field. In  our simulations, we have  a layout of  $N = 51
 \times 26 = 1326$ grid points.
 points in  the sensing field. In  our simulations, we have  a layout of  $N = 51
 \times 26 = 1326$ grid points.

-%The accuracy of this method depends on the distance between grids. In our
-%simulations, the sensing field has been divided into 50 by 25 grid points, which means
-%there are $51 \times 26~ = ~ 1326$ points in total.
-% Therefore, for our simulations, the error in the coverage calculation is less than ~ 1 $\% $.
-
-\iffalse
-
-\item{{\bf Number of Active Sensors Ratio(ASR)}:} It is important to have as few active nodes as possible in each round,
-in  order to  minimize  the communication  overhead  and maximize  the
-network lifetime. The Active Sensors Ratio is defined as follows:
-\begin{equation*}
-\scriptsize
-\mbox{ASR}(\%) =  \frac{\sum\limits_{r=1}^R \mbox{$A_r^t$}}{\mbox{$S$}} \times 100 .
-\end{equation*}
-Where: $A_r^t$ is the number of active sensors in the subregion $r$ during round $t$ in the current sensing phase, $S$ is the total number of sensors in the network, and $R$ is the total number of the subregions in the network.
-
-\fi

 
 \item {{\bf  Energy Consumption}:}  energy consumption (EC)  can be seen  as the
 
 \item {{\bf  Energy Consumption}:}  energy consumption (EC)  can be seen  as the

-  total   energy   consumed   by   the   sensors   during   $Lifetime_{95}$   or
-  $Lifetime_{50}$, divided  by the number of periods.  Formally, the computation
+  total amount of  energy   consumed   by   the   sensors   during   $Lifetime_{95}$   
+  or $Lifetime_{50}$, divided  by the number of periods.  Formally, the computation

   of EC can be expressed as follows:
   \begin{equation*}
     \scriptsize
   of EC can be expressed as follows:
   \begin{equation*}
     \scriptsize


@@ -840,35 +705,21 @@ Where: $A_r^t$ is the number of active sensors in the subregion $r$ during round
       + E^{a}_m+E^{s}_m \right)}{M},
   \end{equation*}
 
       + E^{a}_m+E^{s}_m \right)}{M},
   \end{equation*}
 

-where $M$  corresponds to the number  of periods.  The total  energy consumed by
-the  sensors (EC)  comes  through  taking into  consideration  four main  energy
-factors. The  first one, denoted $E^{\scriptsize  \mbox{com}}_m$, represent the
-energy consumption  spent by  all the nodes  for wireless  communications during
-period $m$.   $E^{\scriptsize \mbox{list}}_m$,  the next factor,  corresponds to
-the  energy consumed by  the sensors  in LISTENING  status before  receiving the
-decision to  go active or  sleep in period $m$.  $E^{\scriptsize \mbox{comp}}_m$
-refers to the energy needed by all the leader nodes to solve the integer program
-during a period.  Finally, $E^a_{m}$ and $E^s_{m}$ indicate  the energy consumed
-by the whole network in the sensing phase (active and sleeping nodes).
-
-
-\iffalse 
-\item {{\bf  Execution Time}:}  a sensor node  has limited energy  resources and
-  computing power, therefore it is important that the proposed algorithm has the
-  shortest possible execution  time. The energy of a sensor  node must be mainly
-  used for the sensing phase, not for the pre-sensing ones.
- 
-\item {{\bf Stopped simulation runs}:} A simulation ends when the sensor network
-  becomes disconnected (some nodes are dead and are not able to send information
-  to the base station). We report the number of simulations that are stopped due
-  to network disconnections and for which round it occurs.
-
-\fi
+where $M$  corresponds to  the number  of periods.  The  total amount  of energy
+consumed by the  sensors (EC) comes through taking  into consideration four main
+energy   factors.  The  first   one,  denoted   $E^{\scriptsize  \mbox{com}}_m$,
+represents  the  energy  consumption  spent   by  all  the  nodes  for  wireless
+communications  during period  $m$.  $E^{\scriptsize  \mbox{list}}_m$,  the next
+factor, corresponds  to the energy consumed  by the sensors  in LISTENING status
+before  receiving   the  decision  to  go   active  or  sleep   in  period  $m$.
+$E^{\scriptsize \mbox{comp}}_m$  refers to the  energy needed by all  the leader
+nodes  to solve the  integer program  during a  period.  Finally,  $E^a_{m}$ and
+$E^s_{m}$ indicate the energy consumed by the whole network in the sensing phase
+(active and sleeping nodes).

 
 \end{itemize}
 %\end{enumerate}
 
 
 \end{itemize}
 %\end{enumerate}
 

-

 %\subsection{Performance Analysis for different subregions}
 \subsection{Performance analysis}
 \label{sub1}
 %\subsection{Performance Analysis for different subregions}
 \subsection{Performance analysis}
 \label{sub1}


@@ -877,7 +728,7 @@ In this subsection, we first focus  on the performance of our DiLCO protocol for
 different numbers  of subregions.  We consider partitions  of the WSN  area into
 $2$, $4$, $8$, $16$, and $32$ subregions. Thus the DiLCO protocol is declined in
 five versions:  DiLCO-2, DiLCO-4,  DiLCO-8, DiLCO-16, and  DiLCO-32. Simulations
 different numbers  of subregions.  We consider partitions  of the WSN  area into
 $2$, $4$, $8$, $16$, and $32$ subregions. Thus the DiLCO protocol is declined in
 five versions:  DiLCO-2, DiLCO-4,  DiLCO-8, DiLCO-16, and  DiLCO-32. Simulations

-without  partitioning  the  area  of  interest,  case  which  corresponds  to  a
+without  partitioning  the  area  of  interest,  cases  which  correspond  to  a

 centralized  approach, are  not presented  because they  require  high execution
 times to solve the integer program and therefore consume too much energy.
 
 centralized  approach, are  not presented  because they  require  high execution
 times to solve the integer program and therefore consume too much energy.
 


@@ -890,36 +741,32 @@ chosen to remain active during the sensing phase.
 \subsubsection{Coverage ratio} 
 
 Figure~\ref{fig3} shows  the average coverage  ratio for 150 deployed  nodes. It
 \subsubsection{Coverage ratio} 
 
 Figure~\ref{fig3} shows  the average coverage  ratio for 150 deployed  nodes. It

-can  be seen  that both  DESK and  GAF provide  a little  better  coverage ratio
-compared to DiLCO  in the first thirty periods. This can  be easily explained by
-the number of  active nodes: the optimization process  of our protocol activates
-less nodes  than DESK  or GAF, resulting  in a  slight decrease of  the coverage
-ratio. In case of DiLCO-2  (respectively DiLCO-4), the coverage ratio exhibits a
-fast decrease  with the number  of periods and  reaches zero value  in period~18
-(respectively 46), whereas  the other versions of DiLCO, DESK,  and GAF ensure a
-coverage ratio above  50\% for subsequent periods.  We  believe that the results
-obtained with these two methods can be explained by a high consumption of energy
-and we will check this assumption in the next subsection.
+can be seen  that both DESK and  GAF provide a coverage ratio  which is slightly
+better  compared to  DiLCO  in the  first  thirty periods.  This  can be  easily
+explained  by  the number  of  active nodes:  the  optimization  process of  our
+protocol activates less  nodes than DESK or GAF, resulting  in a slight decrease
+of the coverage  ratio. In case of DiLCO-2  (respectively DiLCO-4), the coverage
+ratio exhibits a fast decrease with the number of periods and reaches zero value
+in period~18 (respectively  46), whereas the other versions  of DiLCO, DESK, and
+GAF ensure a coverage ratio above  50\% for subsequent periods.  We believe that
+the  results  obtained  with these  two  methods  can  be  explained by  a  high
+consumption of energy and we will check this assumption in the next subsection.

 
 Concerning  DiLCO-8, DiLCO-16,  and  DiLCO-32,  these methods  seem  to be  more
 efficient than DESK  and GAF, since they can provide the  same level of coverage
 (except in the first periods where  DESK and GAF slightly outperform them) for a
 greater number  of periods. In fact, when  our protocol is applied  with a large
 number of subregions (from 8 to 32~regions), it activates a restricted number of
 
 Concerning  DiLCO-8, DiLCO-16,  and  DiLCO-32,  these methods  seem  to be  more
 efficient than DESK  and GAF, since they can provide the  same level of coverage
 (except in the first periods where  DESK and GAF slightly outperform them) for a
 greater number  of periods. In fact, when  our protocol is applied  with a large
 number of subregions (from 8 to 32~regions), it activates a restricted number of

-nodes, and thus allow to extend the network lifetime.
+nodes, and thus enables the extension of the network lifetime.

 
 \parskip 0pt    
 \begin{figure}[t!]
 \centering
 
 \parskip 0pt    
 \begin{figure}[t!]
 \centering

- \includegraphics[scale=0.45] {R/CR.pdf} 
+ \includegraphics[scale=0.475] {CR.pdf} 

 \caption{Coverage ratio}
 \label{fig3}
 \end{figure} 
 
 \caption{Coverage ratio}
 \label{fig3}
 \end{figure} 
 

-%As shown in the figure ~\ref{fig3}, as the number of subregions increases,  the coverage preservation for area of interest increases for a larger number of periods. Coverage ratio decreases when the number of periods increases due to dead nodes. Although  some nodes are dead,
-%thanks to  DiLCO-8,  DiLCO-16 and  DiLCO-32 protocols,  other nodes are  preserved to  ensure the coverage. Moreover, when  we have a dense sensor network, it leads to maintain the  coverage for a larger number of rounds. DiLCO-8,  DiLCO-16 and  DiLCO-32 protocols are
-%slightly more efficient than other protocols, because they subdivides
-%the area of interest into 8, 16 and 32~subregions if one of the subregions becomes disconnected, the coverage may be still ensured in the remaining subregions.%

 
 \subsubsection{Energy consumption}
 
 
 \subsubsection{Energy consumption}
 


@@ -936,8 +783,8 @@ used for the different performance metrics.
 
 \begin{figure}[h!]
 \centering
 
 \begin{figure}[h!]
 \centering

-\includegraphics[scale=0.45]{R/EC.pdf} 
-\caption{Energy consumption}
+\includegraphics[scale=0.475]{EC.pdf} 
+\caption{Energy consumption per period}

 \label{fig95}
 \end{figure} 
 
 \label{fig95}
 \end{figure} 
 


@@ -945,11 +792,16 @@ The  results  depict the  good  performance of  the  different  versions of  our
 protocol.   Indeed,  the protocols  DiLCO-16/50,  DiLCO-32/50, DiLCO-16/95,  and
 DiLCO-32/95  consume less  energy than  their DESK  and GAF  counterparts  for a
 similar level of area coverage.   This observation reflects the larger number of
 protocol.   Indeed,  the protocols  DiLCO-16/50,  DiLCO-32/50, DiLCO-16/95,  and
 DiLCO-32/95  consume less  energy than  their DESK  and GAF  counterparts  for a
 similar level of area coverage.   This observation reflects the larger number of

-nodes set active by DESK and GAF.
+nodes set active  by DESK and GAF. 

 
 

-
-%In fact,  a distributed  method on the subregions greatly reduces the number of communications and the time of listening so thanks to the partitioning of the initial network into several independent subnetworks. 
-%As shown in Figures~\ref{fig95} and ~\ref{fig50} , DiLCO-2 consumes more energy than the other versions of DiLCO, especially for large sizes of network. This is easy to understand since the bigger the number of sensors involved in the integer program, the larger the time computation to solve the optimization problem as well as the higher energy consumed during the communication.  
+Now, if we consider a same  protocol, we can notice that the average consumption
+per  period increases slightly  for our  protocol when  increasing the  level of
+coverage and the number of node,  whereas it increases more largely for DESK and
+GAF.  In case of DiLCO, it means that even if a larger network allows to improve
+the number of periods with a  minimum coverage level value, this improvement has
+a  higher energy  cost  per period  due  to communication  overhead  and a  more
+difficult optimization problem.   However, in comparison with DESK  and GAF, our
+approach has a reasonable energy overcost.

 
 \subsubsection{Execution time}
 
 
 \subsubsection{Execution time}
 


@@ -967,25 +819,23 @@ Figure~\ref{fig8}.
 
 \begin{figure}[h!]
 \centering
 
 \begin{figure}[h!]
 \centering

-\includegraphics[scale=0.45]{R/T.pdf}  
+\includegraphics[scale=0.475]{T.pdf}  

 \caption{Execution time in seconds}
 \label{fig8}
 \end{figure} 
 
 Figure~\ref{fig8} shows that DiLCO-32 has very low execution times in comparison
 \caption{Execution time in seconds}
 \label{fig8}
 \end{figure} 
 
 Figure~\ref{fig8} shows that DiLCO-32 has very low execution times in comparison

-with  other DiLCO  versions, because  the activity  scheduling is  tackled  by a
+with  other DiLCO  versions, because  the activity  scheduling is  tackled by  a

 larger  number of  leaders and  each  leader solves  an integer  problem with  a
 limited number  of variables and  constraints.  Conversely, DiLCO-2  requires to
 solve an optimization problem with half of the network nodes and thus presents a
 high execution time.  Nevertheless if  we refer to Figure~\ref{fig3}, we observe
 that DiLCO-32  is slightly less efficient  than DilCO-16 to maintain  as long as
 larger  number of  leaders and  each  leader solves  an integer  problem with  a
 limited number  of variables and  constraints.  Conversely, DiLCO-2  requires to
 solve an optimization problem with half of the network nodes and thus presents a
 high execution time.  Nevertheless if  we refer to Figure~\ref{fig3}, we observe
 that DiLCO-32  is slightly less efficient  than DilCO-16 to maintain  as long as

-possible high  coverage. In fact excessive  subdivision of the  area of interest
-prevents   to  ensure   good  coverage   especially  on   the  borders   of  the
+possible high coverage. In fact an excessive subdivision of the area of interest
+prevents  it  to  ensure a  good  coverage  especially  on  the borders  of  the

 subregions. Thus,  the optimal number of  subregions can be seen  as a trade-off
 between execution time and coverage performance.
 
 subregions. Thus,  the optimal number of  subregions can be seen  as a trade-off
 between execution time and coverage performance.
 

-%The DiLCO-32 has more suitable times in the same time it turn on redundent nodes more.  We think that in distributed fashion the solving of the  optimization problem in a subregion can be tackled by sensor nodes. Overall, to be able to deal  with very large networks,  a distributed method is clearly required.
-

 \subsubsection{Network lifetime}
 
 In the next figure, the network lifetime is illustrated. Obviously, the lifetime
 \subsubsection{Network lifetime}
 
 In the next figure, the network lifetime is illustrated. Obviously, the lifetime


@@ -996,7 +846,7 @@ network lifetime.
 
 \begin{figure}[h!]
 \centering
 
 \begin{figure}[h!]
 \centering

-\includegraphics[scale=0.45]{R/LT.pdf}  
+\includegraphics[scale=0.475]{LT.pdf}  

 \caption{Network lifetime}
 \label{figLT95}
 \end{figure} 
 \caption{Network lifetime}
 \label{figLT95}
 \end{figure} 


@@ -1004,74 +854,38 @@ network lifetime.
 As  highlighted by  Figure~\ref{figLT95},  when the  coverage  level is  relaxed
 ($50\%$) the network lifetime also  improves. This observation reflects the fact
 that  the higher  the coverage  performance, the  more nodes  must be  active to
 As  highlighted by  Figure~\ref{figLT95},  when the  coverage  level is  relaxed
 ($50\%$) the network lifetime also  improves. This observation reflects the fact
 that  the higher  the coverage  performance, the  more nodes  must be  active to

-ensure the  wider monitoring.  For a  same level of  coverage, DiLCO outperforms
+ensure the wider monitoring.  For a similar level of coverage, DiLCO outperforms

 DESK and GAF for the lifetime of  the network. More specifically, if we focus on
 DESK and GAF for the lifetime of  the network. More specifically, if we focus on

-the larger level  of coverage ($95\%$) in case of  our protocol, the subdivision
-in $16$~subregions seems to be the most appropriate.
+the  larger  level  of coverage  ($95\%$)  in  the  case  of our  protocol,  the
+subdivision in $16$~subregions seems to be the most appropriate.

 
 

-% with  our DiLCO-16/50, DiLCO-32/50, DiLCO-16/95 and DiLCO-32/95 protocols
-% that leads to the larger lifetime improvement in comparison with other approaches. By choosing the best 
-% suited nodes, for each round, to cover the area of interest and by
-% letting the other ones sleep in order to be used later in next rounds. Comparison shows that our DiLCO-16/50, DiLCO-32/50, DiLCO-16/95 and DiLCO-32/95 protocols, which are used distributed optimization over the subregions, are the best one because it is robust to network disconnection during the network lifetime as well as it consume less energy in comparison with other approaches. It also means that distributing the protocol in each node and subdividing the sensing field into many subregions, which are managed
-% independently and simultaneously, is the most relevant way to maximize the lifetime of a network.

 
 \section{\uppercase{Conclusion and future work}}
 \label{sec:Conclusion and Future Works} 
 
 
 \section{\uppercase{Conclusion and future work}}
 \label{sec:Conclusion and Future Works} 
 

-A crucial problem in WSN is  to schedule the sensing activities of the different
-nodes  in order to  ensure both  coverage of  the area  of interest  and longest
+A crucial problem in WSN is to  schedule the sensing activities of the different
+nodes  in order  to ensure  both coverage  of the  area of  interest and  longer

 network lifetime. The inherent limitations of sensor nodes, in energy provision,
 network lifetime. The inherent limitations of sensor nodes, in energy provision,

-communication and computing capacities,  require protocols that optimize the use
-of  the  available resources  to  fulfill the  sensing  task.   To address  this
-problem, this paper proposes a  two-step approach. Firstly, the field of sensing
+communication and computing capacities, require  protocols that optimize the use
+of  the available  resources  to  fulfill the  sensing  task.   To address  this
+problem, this paper proposes a two-step  approach. Firstly, the field of sensing

 is  divided into  smaller  subregions using  the  concept of  divide-and-conquer
 method. Secondly,  a distributed  protocol called Distributed  Lifetime Coverage
 is  divided into  smaller  subregions using  the  concept of  divide-and-conquer
 method. Secondly,  a distributed  protocol called Distributed  Lifetime Coverage

-Optimization is applied in each  subregion to optimize the coverage and lifetime
-performances.   In a subregion,  our protocol  consists to  elect a  leader node
+Optimization is applied in each subregion  to optimize the coverage and lifetime
+performances.  In a  subregion, our protocol consists in electing  a leader node

 which will then perform a sensor activity scheduling. The challenges include how
 which will then perform a sensor activity scheduling. The challenges include how

-to  select   the  most  efficient  leader   in  each  subregion   and  the  best
+to  select   the  most  efficient  leader   in  each  subregion  and   the  best

 representative set of active nodes to ensure a high level of coverage. To assess
 the performance of our approach, we  compared it with two other approaches using
 representative set of active nodes to ensure a high level of coverage. To assess
 the performance of our approach, we  compared it with two other approaches using

-many performance metrics  like coverage ratio or network  lifetime. We have also
-study the  impact of the  number of subregions  chosen to subdivide the  area of
+many performance metrics  like coverage ratio or network lifetime.  We have also
+studied the impact of  the number of subregions chosen to  subdivide the area of

 interest,  considering  different  network  sizes.  The  experiments  show  that
 interest,  considering  different  network  sizes.  The  experiments  show  that

-increasing the  number of subregions improves  the lifetime. The  more there are
-subregions,  the  more  the  network  is  robust  against  random  disconnection
-resulting from dead nodes.  However, for  a given sensing field and network size
-there is an optimal number of  subregions.  Therefore, in case of our simulation
-context  a subdivision in  $16$~subregions seems  to be  the most  relevant. The
-optimal number of subregions will be investigated in the future.
-
-\iffalse
-\noindent In this paper, we have  addressed the problem of the coverage and the lifetime
-optimization in wireless  sensor networks. This is a key issue as
-sensor nodes have limited resources in terms of memory,  energy and
-computational power. To cope with this problem, the field of sensing
-is divided into smaller subregions using the concept of divide-and-conquer method, and then a DiLCO protocol for optimizing the coverage and lifetime performances in each subregion.
-The proposed protocol combines two efficient techniques:  network
-leader election and sensor activity scheduling, where the challenges
-include how to select the  most efficient leader in each subregion and
-the best representative active nodes that will optimize the network lifetime
-while  taking the responsibility of covering the corresponding
-subregion. The network lifetime in each subregion is divided into
-rounds, each round consists  of four phases: (i) Information Exchange,
-(ii) Leader Election, (iii) an optimization-based Decision in order to
-select the  nodes remaining  active for  the  last phase,  and  (iv)
-Sensing.  The  simulations show the relevance  of the proposed DiLCO
-protocol in terms of lifetime, coverage ratio, active sensors ratio, energy consumption, execution time, and the number of stopped simulation runs due to network disconnection. Indeed, when
-dealing with large and dense wireless sensor networks, a distributed
-approach like the one we are proposed allows to reduce the difficulty of a
-single global optimization problem by partitioning it in many smaller
-problems, one per subregion, that can be solved more easily.
-
-In future work, we plan to study  and propose a coverage optimization protocol, which
-computes  all active sensor schedules in one time, using
-optimization  methods. \iffalse The round  will still consist of 4 phases, but the
-  decision phase will compute the schedules for several sensing phases
-  which, aggregated together, define a kind of meta-sensing phase.
-The computation of all cover sets in one time is far more
-difficult, but will reduce the communication overhead. \fi
-\fi
+increasing the number  of subregions improves the lifetime.  The more subregions
+there are, the more robust the network is against random disconnection resulting
+from dead nodes.  However,  for a given sensing field and  network size there is
+an optimal number of subregions.  Therefore, in case of our simulation context a
+subdivision in $16$~subregions seems to be the most relevant. The optimal number
+of subregions will be investigated in the future.

 
 \section*{\uppercase{Acknowledgements}}
 
 
 \section*{\uppercase{Acknowledgements}}
 


@@ -1081,7 +895,7 @@ Campus France for  the received support. This paper is  also partially funded by
 the Labex ACTION program (contract ANR-11-LABX-01-01).
 
 %\vfill
 the Labex ACTION program (contract ANR-11-LABX-01-01).
 
 %\vfill

-\bibliographystyle{apalike}
+\bibliographystyle{plain}

 {\small
 \bibliography{Example}}
 
 {\small
 \bibliography{Example}}