modif

[book_gpu.git] / BookGPU / Chapters / chapter6 / PartieSync.tex

\section{General scheme of synchronous code with computation/communication
  overlapping in GPU clusters}\label{ch6:part1}

%Notre     chapitre     précédent      sur     l'optimisation     des     schémas
%parallèles~\cite{ChVCV13}.

\subsection{Synchronous parallel algorithms on GPU clusters}

%\subsubsection{Considered parallel algorithms and implementations}

\noindent {\bf Considered parallel algorithms and implementations}
\medskip

This section focuses on synchronous parallel algorithms implemented with
overlapping computations and communications\index{overlap!computation and communication}. Parallel synchronous algorithms are
easier to implement, debug, and maintain than asynchronous ones (see
Section~\ref{ch6:part2}). Usually, they follow a BSP-like parallel
scheme\index{BSP parallel scheme} (Bulk Synchronous Parallel model),
alternating local computation steps and communication steps
(see~\cite{Valiant:BSP}). Their execution is usually deterministic, except
for stochastic algorithms that contain random number generations. Even in
this case, their execution can be controlled during debug steps, allowing the
user to track and to fix bugs quickly.

However, depending on the properties of the algorithm, it is sometimes possible to
overlap computations and communications. If processes exchange data
that is not needed for the
computation immediately following, it is possible to implement such
an overlap. We have investigated the efficiency of this approach in previous
works~\cite{GUSTEDT:2007:HAL-00280094:1,ChVCV13}, using standard parallel
programming tools to achieve the implementation.

The normalized and well-known Message Passing Interface (MPI\index{MPI}) includes some asynchronous
point-to-point communication routines, that should allow the implementation of some
communication/computation overlap. However, current MPI implementations do not achieve
this goal efficiently; effective overlapping with MPI requires a group of
dedicated threads (in our case implemented with OpenMP\index{OpenMP}) for the basic
synchronous communications while another group of threads executes computations
in parallel.
% Finally, with explicit OpenMP
% threads executing MPI communications or various computations, we succeeded to
% decrease the execution time.
Nevertheless, communication and computation are not completely independent on
modern multicore architectures: they use shared hardware components such as the
interconnection bus and the RAM. Therefore, this approach saves only up to $20\%$
of the expected time on such a platform. This picture changes on clusters
equipped with GPUs. Indeed, GPUs effectively allow independence of computations they
perform and communications done on the mainboard (CPU, interconnection bus, RAM, network
card). We save up to $100\%$ of the expected time on our GPU cluster, as we
will expose in the next section.


%\subsubsection{Specific interests for GPU clusters}

\bigskip
\noindent {\bf Specific interests in GPU clusters}
\medskip

In a computing node, a GPU is a kind of scientific coprocessor, usually located
on an auxiliary board, with its own memory. So, once data are transferred
from the CPU memory to the GPU memory, GPU computations can be achieved on
the GPU board, totally in parallel with any CPU activities (such as internode cluster
communications). The CPU and the GPU access their respective memories and do not
interfere with each other, so they can achieve a very good overlap\index{overlap!computation
and computation} of their activities (better than two CPU cores).

But using a GPU on a computing node requires the transfer of data from the CPU to
the GPU memory, as well as the transfer of the computation results back from the GPU to the
CPU. Transfer times are not excessive, but depending on the application
they still can be significant compared to the GPU computation times. So, sometimes it
can be interesting to overlap the internode cluster communications with both the
CPU/GPU data transfers and the GPU computations. We can identify four main
parallel programming schemes on a GPU cluster:

\begin{enumerate}
\item parallelizing only internode CPU communications with GPU computations,
  and achieving CPU/GPU data transfers before and after this parallel step,
\item parallelizing internode CPU communications with a (sequential) sequence
  of CPU/GPU data transfers and GPU computations,
\item parallelizing internode CPU communications with a streamed sequence of
  CPU/GPU data transfers and GPU computations,
\item parallelizing internode CPU communications with CPU/GPU data transfers
  and with GPU computations, interleaving computation-communication
  iterations.
\end{enumerate}


\subsection{Native overlap of CPU communications and GPU computations}

\begin{figure}[t]
  \centering
  \includegraphics{Chapters/chapter6/figures/Sync-NativeOverlap.pdf}
  \caption{Native overlap of internode CPU communications with GPU computations.}
  \label{fig:ch6p1overlapnative}
\end{figure}

Using CUDA\index{CUDA}, GPU kernel executions are nonblocking, and GPU/CPU data
transfers\index{CUDA!data transfer}
are blocking or nonblocking operations. All GPU kernel executions and CPU/GPU
data transfers are associated to "streams,"\index{CUDA!stream} and all operations on a same stream
are serialized. When transferring data from the CPU to the GPU, then running GPU
computations, and finally transferring results from the GPU to the CPU, there is
a natural synchronization and serialization if these operations are achieved on
the same stream. GPU developers can choose to use one (default) or several
streams. In this first scheme of overlapping, we consider parallel codes using
only one GPU stream.

``Nonblocking  GPU  kernel  execution''  means  a CPU  routine  runs  a  parallel
execution of a GPU computing kernel, and the CPU routine continues its execution
(on the CPU) while the GPU kernel  is running (on the GPU). Then the CPU routine
can initiate some  communications with some other CPUs,  and so it automatically
overlaps  the  internode  CPU  communications  with the  GPU  computations  (see
\Fig{fig:ch6p1overlapnative}). This overlapping is natural when programming with
CUDA  and MPI:  it is  easy to  deploy, but  does not  overlap the  CPU/GPU data
transfers.

\Lst{algo:ch6p1overlapnative} introduces the generic code of a MPI+CUDA
implementation, natively and implicitly overlapping MPI communications with CUDA
GPU computations. 


%\begin{algorithm}[t]
%  \caption{Generic scheme implicitly overlapping MPI communications with CUDA GPU
%   computations}\label{algo:ch6p1overlapnative}
%\pagebreak
\begin{Listing}{algo:ch6p1overlapnative}{generic scheme implicitly overlapping MPI communications with CUDA GPU computations}
// Input data and result variables and arrays (example with
// float datatype, 1D input arrays, and scalar results)
float *cpuInputTabAdr, *gpuInputTabAdr;
float *cpuResTabAdr, *gpuResAdr;

// CPU and GPU array allocations
cpuInputTabAdr = malloc(sizeof(float)*N);
cudaMalloc(&gpuInputTabAdr,sizeof(float)*N);
cpuResTabAdr = malloc(sizeof(float)*NbIter);
cudaMalloc(&gpuResAdr,sizeof(float));

// Definition of the grid of blocks of GPU threads
dim3 Dg, Db;
Dg.x = ...
...

// Indexes of source and destination MPI processes
int dest = ...
int src = ...

// Computation loop (using the GPU)
for (int i = 0; i < NbIter; i++) {
  cudaMemcpy(gpuInputTabAdr, cpuInputTabAdr, // Data transfer:
             sizeof(float)*N,                // CPU --> GPU (sync. op)
             cudaMemcpyHostToDevice);
  gpuKernel_k1<<<Dg,Db>>>();                 // GPU comp. (async. op)
  MPI_Sendrecv_replace(cpuInputTabAdr,       // MPI comms. (sync. op)
                       N,MPI_FLOAT,
                       dest, 0, src, 0, ...);
  // IF there is (now) a result to transfer from the GPU to the CPU:
  cudaMemcpy(cpuResTabAdr + i, gpuResAdr,    // Data transfer:
             sizeof(float),                  // GPU --> CPU (sync. op)
             cudaMemcpyDeviceToHost);
}
...
\end{Listing}
%\end{algorithm}



Some input data and output results arrays and variables are
declared and allocated from line~3 through 10, and a computation loop is
implemented from line~22 through 34. At each iteration:
\begin{itemize}
\item \texttt{cudaMemcpy} on line~23 transfers data from the CPU memory
  to the GPU memory. This is a basic and synchronous data transfer.
\item \texttt{gpuKernel\_k1<<<Dg,Db>>>} on line~26 starts GPU computation
  (running a GPU kernel on the grid of blocks of threads defined in lines~13 to
  15). This is a standard GPU kernel run; it is an asynchronous operation. The
  CPU can continue to run its code.
\item \texttt{MPI\_Sendrecv\_replace} on line~27 achieves some blocking
  internode communications, overlapping GPU computations started just previously.
\item If needed, \texttt{cudaMemcpy} on line~31 transfers the iteration result from
  one variable in the GPU memory to one array index in the CPU memory (in this example the CPU
  collects all iteration results in an array). This operation is started after
  the end of the MPI communication (previous instruction) and after the end of
  the GPU kernel execution. CUDA insures an implicit synchronization of all
  operations involving the same GPU stream, like the default stream in this
  example. The transfer of the results has to wait until the GPU kernel execution is finished.
  If there is no results transfer implemented, the next operation on the GPU
  will wait until the GPU kernel execution has ended.
\end{itemize}

This implementation is the easiest one involving the GPU. It achieves an
implicit overlap of internode communications and GPU computations with no explicit
multithreading required on the CPU. However, CPU/GPU data transfers are
achieved serially and not overlapped.


\subsection{Overlapping with sequences of transfers and computations}

%\subsubsection{Overlapping with a sequential GPU sequence}

\noindent {\bf Overlapping with a sequential GPU sequence}
\medskip

\begin{figure}[t]
  \centering
  \includegraphics[width=\columnwidth]{Chapters/chapter6/figures/Sync-SeqSequenceOverlap.pdf}
  \caption{Overlap of internode CPU communications with a sequence of CPU/GPU data transfers and GPU
  computations.}
  \label{fig:ch6p1overlapseqsequence}
\end{figure}

When CPU/GPU data transfers are not negligible compared to GPU computations, it
can be interesting to overlap internode CPU computations with a \emph{GPU
  sequence}\index{GPU!sequence} including CPU/GPU data transfers and GPU computations (see
\Fig{fig:ch6p1overlapseqsequence}). Algorithmic issues of this approach are basic,
but their implementation requires explicit CPU multithreading and
synchronization, and CPU data buffer duplication. We need to implement two
threads, one starting and achieving MPI communications and the other running
the \emph{GPU sequence}. OpenMP allows an easy and portable implementation of
this overlapping strategy. However, it remains more complex to develop and to
maintain than the previous strategy (overlapping only internode CPU
communications and GPU computations) and should be adopted only when CPU/GPU
data transfer times are not negligible.

\Lst{algo:ch6p1overlapseqsequence} introduces the generic code of a
MPI+OpenMP+CUDA implementation, explicitly overlapping MPI communications with
GPU sequences. 

%\begin{algorithm}
%  \caption{Generic scheme explicitly overlapping MPI communications with
%    sequences of CUDA CPU/GPU transfers and CUDA GPU
%    computations}\label{algo:ch6p1overlapseqsequence}
\begin{Listing}{algo:ch6p1overlapseqsequence}{generic scheme explicitly overlapping MPI communications with sequences of CUDA CPU/GPU transfers and CUDA GPU computations}
// Input data and result variables and arrays (example with
// float datatype, 1D input arrays, and scalar results)
float *cpuInputTabAdrCurrent, *cpuInputTabAdrFuture, *gpuInputTabAdr;
float *cpuResTabAdr, *gpuResAdr;

// CPU and GPU array allocations
cpuInputTabAdrCurrent = malloc(sizeof(float)*N);
cpuInputTabAdrFuture = malloc(sizeof(float)*N);
cudaMalloc(&gpuInputTabAdr,sizeof(float)*N);
cpuResTabAdr = malloc(sizeof(float)*NbIter);
cudaMalloc(&gpuResAdr,sizeof(float));

// Definition of the grid of blocks of GPU threads
dim3 Dg, Db;
Dg.x = ...
...

// Indexes of source and destination MPI processes
int dest = ...
int src = ...

// Set the number of OpenMP threads (to create) to 2
omp_set_num_threads(2);
// Create threads and start the parallel OpenMP region
#pragma omp parallel
{
  // Buffer pointers (thread local variables)
  float *current = cpuInputTabAdrCurrent;
  float *future = cpuInputTabAdrFuture;
  float *tmp;

  // Computation loop (using the GPU)
  for (int i = 0; i < NbIter; i++) {

    // - Thread 0: achieves MPI communications
    if (omp_get_thread_num() == 0) {
      MPI_Sendrecv(current,                  // MPI comms. (sync. op)
                   N, MPI_FLOAT, dest, 0,
                   future,
                   N, MPI_FLOAT, dest, 0, ...);

    // - Thread 1: achieves the GPU sequence (GPU computations and
    //             CPU/GPU data transfers)
    } else if (omp_get_thread_num() == 1) {
      cudaMemcpy(gpuInputTabAdr, current,    // Data transfer:
                 sizeof(float)*N,            // CPU --> GPU (sync. op)
                 cudaMemcpyHostToDevice);
      gpuKernel_k1<<<Dg,Db>>>();             // GPU comp. (async. op)
    // IF there is (now) a result to transfer from the GPU to the CPU:
      cudaMemcpy(cpuResTabAdr + i, gpuResAdr,// Data transfer:
                 sizeof(float),              // GPU --> CPU (sync. op)
                 cudaMemcpyDeviceToHost);
    }

    // - Wait until both threads have achieved their iteration tasks
    #pragma omp barrier
    // - Each thread permutes its local buffer pointers
    tmp = current;
    current = future;
    future = tmp;
  } // End of computation loop
} // End of OpenMP parallel region
...
\end{Listing}
%\end{algorithm}

Lines~25--62 implement the OpenMP parallel region,
around the computation loop (lines~33--61). For efficient performances it is
important to create and destroy threads only one time (not at each iteration):
the parallel region has to surround the computation loop. Lines~3--11
consist of declaration and allocation of input data arrays and result arrays and
variables, as in the previous algorithm (\Lst{algo:ch6p1overlapnative}). However, we implement two input data buffers on the
CPU (current and future version). As we aim to overlap internode MPI
communications and GPU sequence, including CPU to GPU data transfer of current
input data array, we need to store the received new input data array in a
separate buffer. Then, the current input data array will be safely read on the
CPU and copied into the GPU memory.

The thread creations\index{OpenMP!thread creation} are easily achieved with one OpenMP directive (line~25). 
Then each thread defines and initializes \emph{its} local buffer pointers,
and enters \emph{its} computing loop (lines~28--33). Inside the computing
loop, a test on the thread number makes it possible to run a different code in each
thread. Lines~37--40 implement the MPI synchronous communication run by
thread number $0$. Lines~45--52 implement the GPU sequence run by thread
$1$: CPU to GPU data transfer, GPU computation, and GPU to CPU result
transfer (if needed). Details of the three operations of this sequence have not changed
from the previous overlapping strategy.

At the end of \Lst{algo:ch6p1overlapseqsequence}, an OpenMP synchronization
barrier\index{OpenMP!barrier} on line~56 forces the  OpenMP threads to wait until
MPI
communications and GPU sequence are achieved. %, and do not need to access the current input data buffer.
Then, each thread permutes its local buffer pointers (lines~58--60),
and is ready to enter the next iteration, processing the new current input
array.

%\subsubsection{Overlapping with a streamed GPU sequence}

\bigskip
%\pagebreak
\noindent {\bf Overlapping with a streamed GPU sequence}
\medskip

Depending on the algorithm implemented, it is sometimes possible to split the
GPU computation into several parts processing distinct data. Then, we can
speedup the GPU sequence using several CUDA streams\index{CUDA!stream}. The goal is
to overlap CPU/GPU data transfers with GPU computations\index{overlap!GPU data transfers with GPU computation} inside the GPU
  sequence. Compared to the previous overlapping strategy, we have to split the
initial data transfer into a set of $n$ asynchronous and smaller data transfers,
and  split the initial GPU kernel call into a set of $n$ calls to the same GPU
kernel. Usually, these smaller calls are deployed with fewer GPU threads
(i.e., associated to a smaller grid of blocks of threads). Then, the first GPU
computations can start as soon as the first data transfer has been achieved, and
next transfers can be done in parallel with next GPU computations (see
\Fig{fig:ch6p1overlapstreamsequence}).

\begin{figure}[t]
  \centering
  \includegraphics[width=\columnwidth]{Chapters/chapter6/figures/Sync-StreamSequenceOverlap.pdf}
  \caption{Overlap of internode CPU communications with a streamed sequence of CPU/GPU data
  transfers and GPU computations.}
  \label{fig:ch6p1overlapstreamsequence}
\end{figure}

NVIDIA advises  starting all asynchronous CUDA data transfers and then calling
all CUDA kernel executions, using up to $16$ streams \cite{cudabestpractices}.
Then, the CUDA driver and
runtime optimize the global execution of these operations. So, we accumulate two
overlapping mechanisms. The former is controlled by CPU multithreading and
overlaps MPI communications and the streamed GPU sequence. The latter is
controlled by CUDA programming and overlaps CPU/GPU data transfers and GPU
computations. Again, OpenMP allows the easy implementation of the CPU multithreading
and  waiting for the end of both CPU threads before executing the next instructions
of the code.

\Lst{algo:ch6p1overlapstreamsequence} introduces the generic MPI+OpenMP+CUDA
code,  explicitly overlapping MPI communications with
streamed GPU sequences\index{GPU!streamed sequence}.

%\begin{algorithm}
%  \caption{Generic scheme explicitly overlapping MPI communications with streamed sequences of CUDA
%  CPU/GPU transfers and CUDA GPU computations}\label{algo:ch6p1overlapstreamsequence}
\begin{Listing}{algo:ch6p1overlapstreamsequence}{generic scheme explicitly overlapping MPI communications with streamed sequences of CUDA CPU/GPU transfers and CUDA GPU computations}
// Input data and result variables and arrays (example with
// float datatype, 1D input arrays, and scalar results)
float *cpuInputTabAdrCurrent, *cpuInputTabAdrFuture, *gpuInputTabAdr;
float *cpuResTabAdr, *gpuResAdr;
// CPU and GPU array allocations (allocates page-locked CPU memory)
cudaHostAlloc(&cpuInputTabAdrCurrent,sizeof(float)*N,cudaHostAllocDefault);
cudaHostAlloc(&cpuInputTabAdrFuture,sizeof(float)*N,cudaHostAllocDefault);
cudaMalloc(&gpuInputTabAdr,sizeof(float)*N);
cpuResTabAdr = malloc(sizeof(float)*NbIter);
cudaMalloc(&gpuResAdr,sizeof(float));
// Stream declaration and creation
cudaStream_t TabS[NbS];
for(int s = 0; s < NbS; s++)
  cudaStreamCreate(&TabS[s]);
// Definition of the grid of blocks of GPU threads
...
// Set the number of OpenMP threads (to create) to 2
omp_set_num_threads(2);
// Create threads and start the parallel OpenMP region
#pragma omp parallel
{
  // Buffer pointers (thread local variables)
  float *current = cpuInputTabAdrCurrent;
  float *future = cpuInputTabAdrFuture;
  float *tmp;
  // Stride of data processed per stream
  int stride = N/NbS;
  // Computation loop (using the GPU)
  for (int i = 0; i < NbIter; i++) {
    // - Thread 0: achieves MPI communications
    if (omp_get_thread_num() == 0) {
      MPI_Sendrecv(current,             // MPI comms. (sync. op)
                   N, MPI_FLOAT, dest, 0,
                   future,
                   N, MPI_FLOAT, dest, 0, ...);
    // - Thread 1: achieves the streamed GPU sequence (GPU 
    //   computations and CPU/GPU data transfers)
    } else if (omp_get_thread_num() == 1) {
      for (int s = 0; s < NbS; s++) {   // Start all data transfers:
        cudaMemcpyAsync(gpuInputTabAdr + s*stride, // CPU --> GPU
                        current + s*stride,        // (async. ops)
                        sizeof(float)*stride,
                        cudaMemcpyHostToDevice,
                        TabS[s]);
      }
      for (int s = 0; s < NbS; s++) { // Start all GPU comps. (async.)
        gpuKernel_k1<<<Dg, Db, 0, TabS[s]>>>(gpuInputTabAdr + s*stride);
      }
      cudaThreadSynchronize();          // Wait all threads are ended
   // IF there is (now) a result to transfer from the GPU to the CPU:
      cudaMemcpy(cpuResTabAdr,          // Data transfers:
                 gpuResAdr,             // GPU --> CPU (sync. op)
                 sizeof(float),
                 cudaMemcpyDeviceToHost);
    }
    // - Wait until both threads have achieved their iteration tasks
    #pragma omp barrier
    // - Each thread permutes its local buffer pointers
    tmp = current; current = future; future = tmp;
  } // End of computation loop
} // End of OpenMP parallel region
...
// Destroy the streams
for(int s = 0; s < NbS; s++)
  cudaStreamDestroy(TabS[s]);
...
\end{Listing}
%\end{algorithm}

Efficient usage of CUDA streams requires  executing
asynchronous CPU/GPU data transfers, which implies reading page-locked
data\index{page-locked data} in CPU memory. So, CPU
memory allocations on lines~6 and 7 are implemented with \texttt{cudaHostAlloc} instead of
the basic \texttt{malloc} function. Then, $NbS$ \emph{streams} are created on lines~12--14.
Usually we create $16$ streams: the maximum number supported by CUDA.

An OpenMP parallel region\index{OpenMP!parallel region} including two threads is implemented on lines~18--61 of
\Lst{algo:ch6p1overlapstreamsequence}, as in the previous algorithm (see
\Lst{algo:ch6p1overlapseqsequence}). Code of thread $0$ achieving MPI communication is unchanged, but
code of thread $1$ is now using streams. Following NVIDIA recommandations, we first implement
a loop starting $NbS$ asynchronous data transfers (lines~39--45): transferring $N/NbS$ data on
each stream. Then we  implement a second loop (lines~46--48), starting asynchronous
executions of $NbS$ grids of blocks of GPU threads (one per stream). Data transfers and kernel
executions on the same stream are synchronized by CUDA and the GPU. So, each kernel execution will
start after its data has been transferred into the GPU memory, and the GPU
scheduler ensures the start of
some kernel executions as soon as the first data transfers are achieved. Then, next data transfers
will be overlapped with GPU computations. After the kernel calls, on the different streams,
we wait for the end of all GPU threads previously run, calling an explicit synchronization
function on line~49. This synchronization is not mandatory, but it will make the implementation more
robust and will facilitate the debugging steps: all GPU computations run by the OpenMP thread number
$1$ will be achieved before this thread enters a new loop iteration, or before the computation
loop has ended.

If a partial result has to be transferred from GPU to CPU memory  at the end of each loop iteration
(for example, the result of one \emph{reduction} per iteration), this transfer is achieved
synchronously on  the default stream (no particular stream is specified) on lines~51--54.
Availability of the result values is ensured by the synchronization implemented on line~49.
However, if a partial result has to be transferred onto the CPU on each stream, then $NbS$ asynchronous data
transfers could be started in parallel (one per stream) and should be implemented before the
synchronization operation on line~49. The end of the computation loop includes a synchronization
barrier of the two OpenMP threads, waiting until they have finished accessing the different data
buffers in the current iteration. Then, each OpenMP thread exchanges its local buffer pointers, as
in the previous algorithm. After the computation loop, we have added the
destruction of the CUDA streams (lines~64--65).

In  conclusion,  CUDA  streams\index{CUDA!stream}   have  been  used  to  extend
\Lst{algo:ch6p1overlapseqsequence}     with     respect     to    its     global
scheme. \Lst{algo:ch6p1overlapstreamsequence}  still creates an  OpenMP parallel
region, with two CPU threads, one  in charge of MPI communications and the other
managing data  transfers and GPU computations. Unfortunately,  using GPU streams
requires  the ability  to split  a  GPU computation  into independent  subparts,
working on  independent subsets of  data.  \Lst{algo:ch6p1overlapstreamsequence}
is not so generic as \Lst{algo:ch6p1overlapseqsequence}.


\subsection{Interleaved communications-transfers-computations\\overlapping}

Many algorithms do not support splitting data transfers and kernel calls, and
cannot exploit CUDA streams, for example, when each GPU thread requires access to
some data spread in the global set of transferred data. Then, it is possible to
overlap internode CPU communications, CPU/GPU data transfers, and GPU
computations, if the algorithm achieves \emph{computation-communication
  iterations} and if we can interleave these iterations. At iteration $k$: CPUs
exchange data $D_k$, each CPU/GPU couple transfers data $D_k$, and each GPU
achieves computations on data $D_{k-1}$ (see
\Fig{fig:ch6p1overlapinterleaved}). Compared to the previous strategies, this
strategy requires twice as many CPU data buffers
and twice as many GPU buffers.

\begin{figure}[t]
  \centering
  \includegraphics{Chapters/chapter6/figures/Sync-CompleteInterleaveOverlap.pdf}
  \caption{Complete overlap of internode CPU communications, CPU/GPU data transfers, and GPU
  computations, interleaving computation-communication iterations.}
  \label{fig:ch6p1overlapinterleaved}
\end{figure}

\Lst{algo:ch6p1overlapinterleaved} introduces the generic code of a
MPI+OpenMP+CUDA implementation, explicitly interleaving
computation-communication iterations and overlapping MPI communications, CUDA CPU/GPU
transfers, and CUDA GPU computations. 

%\begin{algorithm}
%  \caption{Generic scheme explicitly overlapping MPI communications, CUDA CPU/GPU transfers and CUDA
%  GPU computations, interleaving computation-communication iterations}\label{algo:ch6p1overlapinterleaved}
\begin{Listing}{algo:ch6p1overlapinterleaved}{generic scheme explicitly overlapping MPI communications, CUDA CPU/GPU transfers, and CUDA GPU computations, interleaving computation-communication iterations}
// Input data and result variables and arrays (example with
// float datatype, 1D input arrays, and scalar results)
float *cpuInputTabAdrCurrent, *cpuInputTabAdrFuture;
float *gpuInputTabAdrCurrent, *gpuInputTabAdrFuture;
float *cpuResTabAdr, *gpuResAdr;

// CPU and GPU array allocations
cpuInputTabAdrCurrent = malloc(sizeof(float)*N);
cpuInputTabAdrFuture = malloc(sizeof(float)*N);
cudaMalloc(&gpuInputTabAdrCurrent,sizeof(float)*N);
cudaMalloc(&gpuInputTabAdrFuture,sizeof(float)*N);
cpuResTabAdr = malloc(sizeof(float)*NbIter);
cudaMalloc(&gpuResAdr,sizeof(float));

// Definition of the grid of blocks of GPU threads
dim3 Dg, Db; Dg.x = ...
// Indexes of source and destination MPI processes
int dest, src; dest = ...

// Set the number of OpenMP threads (to create) to 2
omp_set_num_threads(3);
// Create threads and start the parallel OpenMP region
#pragma omp parallel
{
  // Buffer pointers (thread local variables)
  float *cpuCurrent = cpuInputTabAdrCurrent;
  float *cpuFuture  = cpuInputTabAdrFuture;
  float *gpuCurrent = gpuInputTabAdrCurrent;
  float *gpuFuture  = gpuInputTabAdrFuture;
  float *tmp;

  // Computation loop on NbIter + 1 iterations
  for (int i = 0; i < NbIter + 1; i++) {
    // - Thread 0: achieves MPI communications
    if (omp_get_thread_num() == 0) {
      if (i < NbIter) {
        MPI_Sendrecv(cpuCurrent,            // MPI comms. (sync. op)
                     N, MPI_FLOAT, dest, 0,
                     cpuFuture,
                     N, MPI_FLOAT, dest, 0, ...);
      }
    // - Thread 1: achieves the CPU/GPU data transfers
    } else if (omp_get_thread_num() == 1) {
      if (i < NbIter) {
        cudaMemcpy(gpuFuture, cpuCurrent,   // Data transfer:
                   sizeof(float)*N,         // CPU --> GPU (sync. op)
                   cudaMemcpyHostToDevice);
      }
    // - Thread 2: achieves the GPU computations and result transfer
    } else if (omp_get_thread_num() == 2) {
      if (i > 0) {
        gpuKernel_k1<<<Dg,Db>>>(gpuCurrent);// GPU comp. (async. op)
        // IF there is (now) a result to transfer from GPU to CPU:
        cudaMemcpy(cpuResTabAdr + (i-1),    // Data transfer:
                   gpuResAdr, sizeof(float),// GPU --> CPU (sync. op)
                   cudaMemcpyDeviceToHost);
      }
    }
    // - Wait until both threads have achieved their iteration tasks
    #pragma omp barrier
    // - Each thread permutes its local buffer pointers
    tmp = cpuCurrent; cpuCurrent = cpuFuture; cpuFuture = tmp;
    tmp = gpuCurrent; gpuCurrent = gpuFuture; gpuFuture = tmp;
  } // End of computation loop
} // End of OpenMP parallel region
...
\end{Listing}
%\end{algorithm}

As in the previous algorithms, we declare two CPU input data arrays
(current and future version) on line~3. However, in this version we also declare two GPU input data arrays on line~4. On
lines~8--11, these four data arrays are allocated, using \texttt{malloc} and
\texttt{cudaMalloc}.
We do not need to allocate page-locked memory space. On lines~23--65 we
create an OpenMP parallel region, configured to run three threads (see line~21). Lines~26--30 are
declarations of thread local pointers on data arrays and variables (each thread will use its own
pointers). On line~33, the three threads enter a computation loop of \texttt{NbIter + 1}
iterations. We need to run one more iteration than with previous algorithms.

Lines~35--41 are the MPI communications, achieved by the thread number $0$. They send the
current CPU input data array to another CPU, and receive the future CPU input data array from
another CPU, like in previous algorithms. But this thread achieves communications only during the
\emph{first} \texttt{NbIter} iterations. Lines~43--48 are the CPU to GPU input data
transfers, achieved by thread number $1$. These data transfers are run in parallel with MPI
communications. They are run during the \emph{first} \texttt{NbIter} iterations and transfer
current CPU input data array into the future GPU data array. Lines~50--57
correspond to the code run by
thread number $2$. They start GPU computations, process the current GPU input data array, and if
necessary
transfer a GPU result to an index of the CPU result array. These GPU computations and result
transfers are run during the \emph{last} \texttt{NbIter} iterations: the GPU computations
have to wait until the first data transfer is ended before starting to process any data and cannot run
during the first iteration. So, the activity of the third thread is shifted by one iteration
compared to the activities of the other threads. Moreover, the address of the current GPU input data
array has to be passed as a parameter of the kernel call on line~52, in order
for the GPU threads to access
the right data array. As in previous algorithms the GPU result is copied to one index of the CPU
result array, in lines~54--56, but due to the shift of the third thread activity this index is
now \texttt{(i - 1)}.

Line~60 is a synchronization barrier\index{OpenMP!barrier} of the three OpenMP threads, followed by a pointer permutation
of local pointers on current and future data arrays, on line~62 and 63. Each
thread waits for the completion of other
threads to use the data arrays, and then permutes its data array pointers before 
entering a new loop iteration.

This complete overlap of MPI communications, CPU/GPU data transfers, and GPU computations is not
too complex to implement, and can be a solution when GPU computations are not adapted to use CUDA
streams: when GPU computations cannot be split into subparts working on independent subsets of input
data. However, this requires running one more iteration (a total of \texttt{NbIter + 1}
iterations). If the number of iterations is very small, it could be more interesting not to
attempt to overlap CPU/GPU data transfers and GPU computations, and to implement \Lst{algo:ch6p1overlapseqsequence}.


\subsection{Experimental validation}
\label{ch6:p1expes}
%\subsubsection{Experimentation testbed}

\noindent {\bf Experimentation testbed}
\medskip

Two clusters located at SUPELEC in Metz (France) have been used for the entire set of
experiments presented in this chapter:
%
\begin{itemize}

\item The first consists of 17 nodes with an Intel Nehalem quad-core processor
  at 2.67Ghz, 6 Gb RAM, and an NVIDIA GeForce GTX480 GPU, each.

\item The second consists of 16 nodes with an Intel core2 dual-core processor at
  2.67Ghz, 4 Gb RAM, and an NVIDIA GeForce GTX580 GPU, each.

\end{itemize}
%
Both clusters have a gigabit Ethernet interconnection network that is connected
through a Dell Power Object 5324 switch. The two switches are linked twice,
ensuring the interconnection of the two clusters.  The software environment
consists of a Linux Fedora 64bit OS (kernel v. 2.6.35), GNU C and C++ compilers
(v. 4.5.1), and the CUDA library (v. 4.2).

%\subsubsection{Validation of the synchronous approach}

\bigskip
\noindent {\bf Validation of the synchronous approach}
\medskip

\begin{figure}[t]
  \centering
  \includegraphics{Chapters/chapter6/curves/gpuSyncOverlap.pdf}
  \caption{Experimental performances of different synchronous algorithms computing a
    dense matrix product.}
  \label{fig:ch6p1syncexpematrixprod}
\end{figure}

\label{ch6:p1block-cyclic}
We have tested our approach of synchronous parallel algorithms with a classic
block cyclic algorithm for dense matrix multiplication\index{matrix
  multiplication!block cyclic}. This problem requires splitting two input matrices ($A$ and $B$) on a ring of
computing nodes and  establishing a circulation of the slices of $A$ matrix on the ring ($B$ matrix
partition does not evolve during all the run). Compared to our generic algorithms, there is no
partial result to transfer from GPU to CPU at the end of each computing iteration. The part of the
result matrix computed on each GPU is transferred onto the CPU at the end of the computation loop.

We have first implemented a synchronous version without any overlap of MPI communications, CPU/GPU
data transfers, and GPU computations. We have added some synchronizations in the native overlapping
version in order to avoid any overlap. We have measured the performance achieved on our cluster with
NVIDIA GTX480 GPUs and matrices sizes of 4096$\times$4096, and we have obtained the curves in \Fig{fig:ch6p1syncexpematrixprod} labeled
\emph{no-ovlp}. We observe that performance increases when the number of processor increases. Of course,
there is a significant increase in cost when comparing a single node (without any MPI communication) with
two nodes (starting to use MPI communications). But beyond two nodes we get a classical performance
curve.

Then, we implemented and tested \Lst{algo:ch6p1overlapnative}, labeled
\emph{ovlp-native} in \Fig{fig:ch6p1syncexpematrixprod}. The native
overlap of MPI communications with the asynchronous run of CUDA kernels appears efficient. When the
number of nodes increases the ratio of the MPI communications increases a lot (because the
computation times decrease a lot). So, there is not a lot of GPU computation
time that remains to be
overlapped, and both \emph{no-ovlp} and \emph{ovlp-native} tend to the same
limit. Already, the native overlap performed in \Lst{algo:ch6p1overlapnative}
achieves a high level of performance very quickly, using only four
nodes. Beyond four nodes, a faster interconnection network would be required for
a performance increase.

Finally, we implemented \Lst{algo:ch6p1overlapseqsequence}, overlapping MPI communications
with a GPU sequence including both CPU/GPU data transfers and GPU computations,
labeled \emph{ovlp-GPUsequence} in \Fig{fig:ch6p1syncexpematrixprod}. From four
up to sixteen nodes it achieves better performances than \emph{ovlp-native}: the
overlapping of MPI communications is wider and thus more efficient. However, this parallelization mechanism has more overhead: OpenMP threads
have to be created and synchronized. With only two nodes it is less efficient than the native
overlapping algorithm. Beyond two nodes, the CPU multithreading overhead seems compensated.
% No, it doesn't need the more implementation of time, but more implementation
% of code :)
\Lst{algo:ch6p1overlapseqsequence} requires more time for the implemention
and can be more complex to maintain, but such extra development cost is
justified if we are looking for better performance.


%%% Local Variables:
%%% mode: latex
%%% fill-column: 80
%%% ispell-dictionary: "american"
%%% mode: flyspell
%%% TeX-master: "../../BookGPU.tex"
%%% End: