1 \chapterauthor{Gilles Perrot}{FEMTO-ST Institute}
8 % \VA{Thomas Davenport}{Senior Adjutant to the Junior Marketing VP}
14 % A component part for an electronic item is
15 % manufactured at one of three different factories, and then delivered to
16 % the main assembly line.Of the total number supplied, factory A supplies
17 % 50\%, factory B 30\%, and factory C 20\%. Of the components
18 % manufactured at factory A, 1\% are faulty and the corresponding
19 % proportions for factories B and C are 4\% and 2\% respectively. A
20 % component is picked at random from the assembly line. What is the
21 % probability that it is faulty?
26 % \mbox{var}\widehat{\Delta} = \sum_{j = 1}^t \sum_{k = j+1}^t
27 % \mbox{var}\,(\hat{\alpha}_j - \hat{\alpha}_k) = \sum_{j = 1}^t
28 % \sum_{k = j+1}^t \sigma^2(1/n_j + 1/n_k). \label{2delvart2}
33 % \Boxhead{Box Title Here}
36 % \begin{theorem}\label{1th:Z_m}
37 % Let $m$ be a prime number. With the addition and multiplication as
38 % defined above, $Z_m$ is a field.
44 % \begin{notelist}{000000}
45 % \notes{Note:}{The process of integrating reengineering is best accomplished with an engineer, a dog, and a cat.}
50 % \VH{Think About It...}
53 % \VTA{The Information Revolution}{Business Week}
57 %\begin{definition}\label{1def:linearcomb}{}\end{definition}
65 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
67 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
71 basicstyle=\footnotesize\ttfamily,
82 % keywordstyle=[1]\textbf,
83 %identifierstyle=\textbf,
84 commentstyle=\color{white}\textbf,
85 stringstyle=\color{white}\ttfamily,
87 % framexleftmargin=17pt,
88 % framexrightmargin=5pt,
89 % framexbottommargin=4pt,
90 backgroundcolor=\color{lightgray},
93 %\DeclareCaptionFont{blue}{\color{blue}}
94 %\captionsetup[lstlisting]{singlelinecheck=false, labelfont={blue}, textfont={blue}}
96 %\DeclareCaptionFont{white}{\color{white}}
97 %\DeclareCaptionFormat{listing}{\colorbox{gray}{\parbox{\textwidth}{\hspace{15pt}#1#2#3}}}
98 %\captionsetup[lstlisting]{format=listing,labelfont=white,textfont=white, singleline}
99 %%%%%%%%%%%%%%%%%%%%%%%% Fin Listings %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
101 \newcommand{\kl}{\includegraphics[scale=0.6]{Chapters/chapter3/img/kernLeft.png}~}
102 \newcommand{\kr}{\includegraphics[scale=0.6]{Chapters/chapter3/img/kernRight.png}}
105 \chapter{Setting up the environnement.}
106 Image processing using a GPU often means using it as a general purpose computing processor, which soon brings up the issue of data transfers, especially when kernel runtime is fast and/or when large data sets are processed.
107 The truth is that, in certain cases, data transfers between GPU and CPU are slower than the actual computation on GPU.
108 It remains that global runtime can still be faster than similar processes run on CPU.
109 Therefore, to fully optimize global runtimes, it is important to pay attention to how memory transfers are done.
110 This leads us to propose, in the following section, an overall code structure to be used with all our kernel examples.
112 Obviously, our code originally accepts various image dimensions and can process color images.
113 However, so as to propose concise and more readable code, we will assume the following limitations:
114 8 or 16~bit-coded gray-level input images whose dimensions $H\times W$ are multiples of 512 pixels.
118 allocate and populate CPU memory \textbf{h\_in}\;
119 allocate CPU pinned-memory \textbf{h\_out}\;
120 allocate GPU global memory \textbf{d\_out}\;
121 declare GPU texture reference \textbf{tex\_img\_in}\;
122 allocate GPU array in global memory \textbf{array\_img\_in}\;
123 bind GPU array \textbf{array\_img\_in} to texture \textbf{tex\_img\_in}\;
124 copy data from \textbf{h\_in} to \textbf{array\_img\_in}\label{algo:memcopy:H2D}\;
125 kernel\kl gridDim,blockDim\kr()\tcc*[f]{outputs to d\_out}\label{algo:memcopy:kernel}\;
126 copy data from \textbf{d\_out} to \textbf{h\_out} \label{algo:memcopy:D2H}\;
127 \caption{Global memory management on CPU and GPU sides.}
131 \section{Data transfers, memory management.}
132 This section deals with the following issues:
134 \item Data transfer from CPU memory to GPU global memory: several GPU memory areas are available as destination memory but the 2-D caching mechanism of texture memory, specifically designed for fetching neighboring pixels, is currently the fastest way to fetch gray-level pixel values inside a kernel computation. This has lead us to choose \textbf{texture memory} as primary GPU memory area for images.
135 \item Data fetching from GPU global memory to kernel local memory: as said above, we use texture memory. Depending on which process is run, texture data is used either by direct fetching in kernel local memory or through a prefetching in shared memory.
136 \item Data outputting from kernels to GPU memory: there is actually no alternative to global memory, as kernels can not directly write into texture memory and as copying from texture to CPU memory would not be faster than from simple global memory.
137 \item Data transfer from GPU global memory to CPU memory: it can be drastically accelerated by use of \textbf{pinned memory}, keeping in mind it has to be used sparingly.
139 Algorithm \ref{algo:memcopy} summarizes all the above considerations and describe how data are handled in our examples. For more information on how to handle the different types of GPU memory, we suggest to refer to CUDA programmer's guide.
141 At debug stage, for simplicity's sake, we use the \textbf{cutil} library supplied by the NVidia developpement kit (SDK). Thus, in order to easily implement our examples, we suggest readers download and install the latest NVidia-SDK (ours is SDK4.0), create a new directory \textit{SDK-root-dir/C/src/fast\_kernels} and adapt the generic \textit{Makefile} that can be found in each sub-directory of \textit{SDK-root-dir/C/src/}. Then, only two more files will be enough to have a fully operational environnement: \textit{main.cu} and \textit{fast\_kernels.cu}.
142 Listings \ref{lst:main1}, \ref{lst:fkern1} and \ref{lst:mkfile} implement all the above considerations minimally, while remaining functional.
144 The main file of Listing \ref{lst:main1} is a simplified version of our actual main file.
145 It has to be noticed that cutil functions \texttt{cutLoadPGMi} and \texttt{cutSavePGMi} only operate on unsigned integer data. As data is coded in short integer format for performance reasons, the use of these functions involves casting data after loading and before saving. This may be overcome by use of a different library. Actually, our choice was to modify the above mentioned cutil functions.
147 Listing \ref{lst:fkern1} gives a minimal kernel skeleton that will serve as the basis for all other kernels. Lines 5 and 6 determine the coordinates $(i, j)$ of the pixel to be processed, each pixel being associated to one thread.
148 The instruction in line 8 combines writing the output gray-level value into global memory and fetching the input gray-level value from 2-D texture memory.
149 The Makefile given in Listing \ref{lst:mkfile} shows how to adapt examples given in SDK.
151 \lstinputlisting[label={lst:main1},caption=Generic main.cu file used to launch CUDA kernels]{Chapters/chapter3/code/mainSkel.cu}
153 \lstinputlisting[label={lst:fkern1},caption=fast\_kernels.cu file featuring one kernel skeleton]{Chapters/chapter3/code/kernSkel.cu}
155 \lstinputlisting[label={lst:mkfile},caption=Generic Makefile based on those provided by NV SDK]{Chapters/chapter3/code/Makefile}
158 \section{Performance measurements}
159 As our goal is to design very fast implementations of basic image processing algorithms, we need to make quite accurate time-measurements, within the order of magnitude of $0.01~ms$. Again, the easiest way of doing so is to use the helper functions of the cutil library. As usual, as the durations we are measuring are short and possibly suject to non neglectable variations, a good practice is to measure multiple executions and issue the mean runtime. All time results given in this chapter have been obtained through 1000 calls to each kernel.
161 Listing \ref{lst:chronos} shows how to use the dedicated cutil functions. Timer declaration and creation only need to be performed once while reset, start and stop can be used as often as necessary. Synchronization is mandatory before stopping the timer (Line 7), to avoid runtime measurement being biased.
162 \lstinputlisting[label={lst:chronos},caption=Time measurement technique using cutil functions]{Chapters/chapter3/code/exChronos.cu}
164 In an attempt to provide relevant speedup values, we either implemented CPU versions of the algorithms studied, or used the values found in existing literature. Still, the large number and diversity of hardware platforms and GPU cards makes it impossible to benchmark every possible combination and significant differences may occur between the speedups we announce and those obtained with different devices. As a reference, our developing platform details as follows:
167 \item CPU codes run on:
169 \item \textbf{Xeon}: a recent and very efficient Quad Core Xeon E31245 at 3.3GHz-8GByte RAM running Linux kernel 3.2.
171 \item GPU codes run on:
173 \item \textbf{C2070}: Nvidia Tesla C2070 hosted by a PC QuadCore Xeon E5620 at 2.4GHz-12GByte RAM, running Linux kernel 2.6.18
174 \item \textbf{GTX280}: NVidia GeForce GTX 280 hosted by a PC QuadCore Xeon X5482 at 3.20GHz-4GByte RAM, running Linux kernel 2.6.32
178 All kernels have also been tested with various image sizes from 512$\times$512 to 4096$\times$4096 pixels. This allows to guess runtime dependancy over image size.
180 Last, like many authors, we chose to use the pixel throughput value of each process in Mega Pixels per second (MP/s) as a performance indicator, including data transfers and kernel runtimes.
181 In order to estimate the potential for improvement of each kernel, a reference throughput measurement, involving identity kernel of Listing \ref{lst:fkern1}, was performed. As this kernel only fetches input values from texture memory and outputs them to global memory without doing any computation, it represents the smallest, thus fastest, possible process and is taken as the reference throughput value (100\%). The same measurement was performed on CPU, with a maximum effective pixel throughput of 130~Mpixel per second. On GPU, depending on grid parameters it amounts to 800~MPixels/s on GTX280 and 1300~Mpixels/s on C2070.
185 \chapter{Implementing a fast median filter}
186 \section{Introduction}
187 Median filtering is a well-known method used in a wide range of application frameworks as well as a standalone filter especially for \textit{salt and pepper} denoising. It is able to highly reduce power of noise without blurring edges too much.
189 First introduced by Tukey in \cite{tukey77}, it has been widely studied since then, and many researchers have proposed efficient implementations of it, adapted to various hypothesis, architectures and processors.
190 Originally, its main drawbacks were its compute complexity, its non linearity and its data-dependent runtime. Several researchers have adress these issues and designed, for example, efficient histogram-based median filter with predictible runtime \cite{Huang:1981:TDS:539567, Weiss:2006:FMB:1179352.1141918}.
192 More recently, the advent of GPUs opened new perspectives in terms of image processing performance, and some researchers managed to take advantage of the new graphic capabilities: in that respect, we can cite the Branchless Vectorized Median filter (BVM) \cite{5402362, chen09} which allows very interesting runtimes on CUDA-enabled devices but, as far as we know, the fastest implementation to date is the histogram-based CCDS median filter \cite{6288187}.
194 Some of the following implementations feature very fast runtimes; They are targeted on Nvidia Tesla GPU (Fermi architecture, compute capability 2.x) but may easily be adapted to other models e.g. those of compute capability 1.3.
196 The fastest ones are based on one efficient parallel implementation of the BVM algorithm described in \cite{mcguire2008median}, improving its performance through fine tuning of its implementation.
198 \section{Median filtering}
199 \subsection{Basic principles}
200 Designing a 2-D median filter basically consists in defining a square window $H(i,j)$ for each pixel $I(i,j)$ of the input image, containing $n\times n$ pixels and centered on $I(i,j)$. The output value $I'(i,j)$ is the median value of the gray level values of the $n\times n$ pixels of $H(i,j)$. Figure \ref{fig:median_1} illustrates this principle with an example of a 5x5 median filter applied on pixel $I(5,6)$. The output value is the median value of the 25 values of the dark gray window centered on pixel $I(5,6)$.
201 Figure \ref{fig:sap_examples} shows an example of a $512\times 512$ pixel image, corrupted by a \textit{salt and pepper} noise and the denoised versions, output respectively by a $3\times 3$, a $5\times 5$ and a 2 iterations $3\times 3 $ median filter.
204 \subfigure[Airplane image, corrupted by salt and pepper noise of density 0.25]{\label{img:sap_example_ref} \includegraphics[width=5cm]{Chapters/chapter3/img/airplane_sap25.png}}\qquad
205 \subfigure[Image denoised by a $3\times 3$ median filter]{\label{img:sap_example_med3} \includegraphics[width=5cm]{Chapters/chapter3/img/airplane_sap25_med3.png}}\\
206 \subfigure[Image denoised by a $5\times 5$ median filter]{\label{img:sap_example_med5} \includegraphics[width=5cm]{Chapters/chapter3/img/airplane_sap25_med5.png}}\qquad
207 \subfigure[Image denoised by 2 iterations of a $3\times 3$ median filter]{\label{img:sap_example_med3_it2} \includegraphics[width=5cm]{Chapters/chapter3/img/airplane_sap25_med3_it2.png}}\\
208 \caption{Exemple of median filtering, applied to salt \& pepper noise reduction.}
209 \label{fig:sap_examples}
212 The generic filtering method is given by Algorithm \ref{algoMedianGeneric}. After the data transfer stage of the first line, which copies data from CPU memory to GPU texture memory, the actual median computing occurs, before the final transfer which copies data back to CPU memory at the last line. Obviously, one key issue is the selection method that identifies the median value. But, as shown in figure \ref{fig:median_overlap}, since two neighboring pixels share part of the values to be sorted, a second key issue is how to rule redundancy between consecutive positions of the running window $H(i,j)$.
213 As mentioned earlier, the selection of the median value can be performed by more than one technique, using either histogram-based or sorting methods, each of them having its own benefits and drawbacks as will be discussed further down.
215 \subsection{A naive implementation}
216 As a reference, Listing \ref{lst:medianGeneric} gives a simple, not to say simplistic implementation of a CUDA kernel (\texttt{kernel\_medianR}) achieving generic $n\times n$ histogram-based median filtering. Its runtime has a very low data dependency, but this implementation does not suit very well GPU architecture. Each pixel loads the whole of its $n\times n$ neighborhood meaning that one pixel is loaded multiple times inside one single thread block, and above all, the use of a local vector (histogram[]) considerably downgrades performance, as the compiler automatically stores such vectors in local memory (slow).
218 Table \ref{tab:medianHisto1} displays measured runtimes of \texttt{kernel\_medianR} and pixel throughputs for each GPU version and for both CPU and GPU implementations. Usual window sizes of $3\times 3$, $5\times 5$ and $7\times 7$ are shown. Though some specific applications require larger window sizes and dedicated algorithms , such small square window sizes are most widely used in general purpose image processing. GPU runtimes have been obtained with a grid of 64-thread blocks. This block size, is a good compromise in this case.
220 The first observation to make when analysing results of Table \ref{tab:medianHisto1} is that, on CPU, window size has almost no influence on the effective pixel throughput.
221 Since inner loops that fill the histogram vector contain very few fetching instructions (from 9 to 49, depending on the window size), it is not surprising to note their neglectable impact compared to outer loops that fetch image pixels (from 256k to 16M instructions).
222 One could be tempted to claim that CPU has no chance to win, which is not so obvious as it highly depends on what kind of algorithm is run and above all, how it is implemented. To illustrate this, we can notice that, despite a maximum effective throughput potential that is almost five times higher, measured GTX280 throughput values sometimes prove slower than CPU values, as shown in Table \ref{tab:medianHisto1}.
224 On the GPU's side, we note high dependence on window size due to the redundancy induced by the multiple fetches of each pixel inside each block, becoming higher with the window size as illustrated by Figure \ref{fig:median_overlap}. On C2070 card, thanks to a more efficient caching mechanism, this effect is lesser. On GPUs, dependency over image size is low, and due to slightly more efficient data transfers when copying larger data amounts, pixel throughputs increases with image size. As an example, transferring a 4096$\times$4096 pixel image (32~MBytes) is a bit faster than transferring 64 times a 512$\times$512 pixel image (0.5~MBytes).
226 %% mettre l'eau à la bouche
228 \lstinputlisting[label={lst:medianGeneric},caption=Generic CUDA kernel achieving median filtering]{Chapters/chapter3/code/medianGeneric.cu}
232 \includegraphics[width=8cm]{Chapters/chapter3/img/median_1.png}
233 \caption{Exemple of 5x5 median filtering}
241 copy data from CPU to GPU texture memory\label{algoMedianGeneric:memcpyH2D}\;
242 \ForEach(\tcc*[f]{in parallel}){pixel at position $(x, y)$}{
243 Read gray-level values of the n$\times$n neighborhood\label{algoMedianGeneric:cptstart}\;
244 Selects the median value among those n$\times$n values\;
245 Outputs the new gray-level value \label{algoMedianGeneric:cptend}\;
247 copy data from GPU global memory to CPU memory\label{algoMedianGeneric:memcpyD2H}\;
248 \caption{\label{algoMedianGeneric}generic n$\times$n median filter}
253 \includegraphics[width=5cm]{Chapters/chapter3/img/median_overlap.png}
254 \caption{Illustration of window overlapping in 5x5 median filtering}
255 \label{fig:median_overlap}
260 %\newcolumntype{I}{!{\vrule width 1.5pt}}
261 \newlength\savedwidth
262 \newcommand\whline{\noalign{\global\savedwidth
263 \arrayrulewidth\global\arrayrulewidth 1.5pt}
264 \hline \noalign{\global\arrayrulewidth
267 \renewcommand{\arraystretch}{1.5}
270 \begin{tabular}{|c|l||c|c|c|c|c|c|c|c|c|}
272 \multicolumn{2}{|l||}{Processor} & \multicolumn{3}{c|}{\textbf{GTX280}} & \multicolumn{3}{c|}{\textbf{C2070}} & \multicolumn{3}{c|}{\textbf{Xeon}} \\ \hline
273 \multicolumn{2}{|l||}{\shortstack{Performances$\rightarrow$\\sizes (pixels)$\downarrow$}} & \shortstack{t\\(ms)}& \shortstack{output\\(MP/s)}& \shortstack{rate\\\% }&\shortstack{t\\(ms)}& \shortstack{output\\(MP/s)}& \shortstack{rate\\\% }&\shortstack{t\\(ms)}& \shortstack{output\\(MP/s)}& \shortstack{rate\\\% } \\ \whline
274 \multirow{3}{*}{\rotatebox{90}{512$^2$}} &3$\times$3&11.50 &22 &2.2 &7.58 &33 &3.4 & 19.25& 14&11\\
275 &5$\times$5&19.10 &14 &1.3 &8.60 &30 &3.0 &18.49 &14 &11\\
276 &7$\times$7&31.30 &8 &0.8 &10.60 &24 &2.5 &20.27 &13 &10\\\whline
277 \multirow{3}{*}{\rotatebox{90}{1024$^2$}}&3$\times$3&44.50 &23 &2.3 &29.60 &34 &3.5 &75.49 &14 &11\\
278 &5$\times$5&71.10 &14 &1.4 &33.00 &31 &3.2 &73.88 &14 &11\\
279 &7$\times$7&114.50 &9 &0.9 &39.10 &26 &2.7 &77.40 &13 &10\\\whline
280 \multirow{3}{*}{\rotatebox{90}{2048$^2$}}&3$\times$3&166.00 &24 &2.4 &115.20 &36 &3.6 &296.18&14 &11\\
281 &5$\times$5&261.00&16 &1.5 &128.20&32 &3.3 &294.55&14 &11\\
282 &7$\times$7&411.90 &10&1.0 &143.30&28 &2.8 &303.48&14 &11\\\whline
283 \multirow{3}{*}{\rotatebox{90}{4096$^2$}}&3$\times$3&523.80 &31 &3.0 &435.00 &38 &3.9 &1184.16&14 &11\\
284 &5$\times$5&654.10&25 &2.4 &460.20&36 &3.7 &1158.26&14 &11\\
285 &7$\times$7&951.30 &17&1.7 &509.60&32 &3.3 &1213.55&14 &11\\\whline
288 \caption{Performance results of \texttt{kernel medianR}. }
289 \label{tab:medianHisto1}
292 \section{NVidia GPU tuning recipes}
293 When designing GPU code, besides thinking of the actual data computing process, one must choose the memory type into which to store temporary data. Three types of GPU memory are available:
295 \item \textbf{Global memory, the most versatile:}\\Offers the largest storing space and global scope but is slowest (400 cycles latency). \textbf{Texture memory} is physically included into it, but allows access through an efficient 2-D caching mechanism.
296 \item \textbf{Registers, the fastest:}\\Allow access wihtout latency, but only 63 registers are available per thread (thread scope), with a maximum of 32K per Symetric Multiprocessor (SM).
297 \item \textbf{Shared memory, a complex compromise:}\\All threads in one block can access 48~KBytes of shared memory, which is faster than global memory (20 cycles latency) but slower than registers.
298 However, bank conflicts can occur if two threads of a warp try to access data stored in one single memory bank. In such cases, the parallel process is re-serialized which may cause significant performance decrease. One easy way to avoid it is to ensure that two consecutive threads in one block always access 32-bit data at two consecutive adresses.
301 \noindent As observed earlier, designing a median filter GPU implementation using only global memory is fairly straightforward, but its performance remains quite low even if it is faster than CPU.
302 To overcome this, the most frequent choice made in efficient implementations found in literature is to use shared memory. Such option implies prefetching data prior to doing the actual computations, a relevant choice, as each pixel of an image belongs to n$\times$n different neighborhoods. Thus, it can be expected that fetching each gray-level value from global memory only once should be more efficient than doing it each time it is required. One of the most efficient implementations using shared memory is presented in \cite{5402362}. In the case of the generic kernel of Listing \ref{lst:medianGeneric}, using shared memory without further optimization would not bring valuable speedup because that would just move redundancy from texture to shared memory fetching and would generate bank conflicts. For information, we wrote such a version of the generic median kernel and our measurements showed a speedup of around 3\% (as an example: 32ms for 5$\times$5 median on a 1024$^2$ pixel image, i.e. 33~Mpixel/s ).
304 As for registers, designing a generic median filter that would only use that type of memory seems difficult, due to the above mentioned 63 register-per-thread limitation.
305 Yet, nothing forbids us to design fixed-size filters, each of them specific to one of the most popular window sizes. It might be worth the effort as dramatic increase in performance could be expected.
307 Another track to follow in order to improve performance of GPU implementations consists in hiding latencies generated by arithmetic instruction calls and memory accesses. Both can be partially hidden by introducing Instruction-Level Parallelism (ILP) and by increasing the data count output by each thread. Though such techniques may seem to break the NVidia occupancy paradigm, they can lead to dramatically higher data throughput values.
308 The following sections illustrate these ideas and detail the design of the fastest CUDA median filter known to date.
310 \section{A 3$\times$3 median filter: using registers }
311 Designing a median filter dedicated to the smallest possible square window size is a good challenge to start using registers.
312 One first issue is that the exclusive use of registers forbids us to implement a naive histogram-based method. In a \textit{8-bit gray level pixel per thread} rule, each histogram requires one 256-element vector to store its values, i.e. four times the maximum register count allowed per thread (63). Considering that a 3$\times$3 median filter involves only 9 pixel values per thread, it seem obvious they can be sorted within the 63-register limit.
314 \subsection{The simplest way}
315 In the case of a 3$\times$3 median filter, the simplest solution consists in associating one register to each gray-level value, then sorting those 9 values and selecting the fifth one, i.e. the median value. For such a small amount of data to sort, a simple selection method is well indicated. As shown in Listing \ref{lst:kernelMedian3RegTri9} (\texttt{kernelMedian3RegTri9()}), the constraint of only using registers leads to adopt an unusual manner of coding. However, results are persuasive: runtimes are divided by around 120 on GTX280 and 80 on C2070, while only reduced by a 3.5 factor on CPU.
316 The diagram of Figure \ref{fig:compMedians1} summarizes these first results. Only C2070 throughputs are shown and compared to CPU results. We included the maximum effective pixel throughput in order to see the improvement potential of the different implementations. We also introduced throughputd achieved by \textit{libJacket}, a commercial implementation, as it was the fastest known implementation of a 3$\times$3 median filter to date, as illustrated in \cite{chen09}. One of the authors of libJacket kindly posted the CUDA code of its 3$\times$3 median filter, that we inserted into our own coding structure. The algorithm itself is quite similar to ours, but running it in our own environement produced higher throughput values than those published in \cite{chen09}, not due to different hardware capabilities between our GTX280 and the GTX260 used in the paper, but to the way we perform memory transfers and to our register-only method of storing temporary data.
318 \lstinputlisting[label={lst:kernelMedian3RegTri9},caption= 3$\times$3 median filter kernel using one register per neighborhood pixel and bubble sort]{Chapters/chapter3/code/kernMedianRegTri9.cu}
322 \includegraphics[width=11cm]{Chapters/chapter3/img/debitPlot1.pdf}
323 \caption{Comparison of pixel throughputs on GPU C2070 and CPU for generic median, in 3$\times$3 median register-only and \textit{libJacket}.}
324 \label{fig:compMedians1}
327 \subsection{Further optimization}
328 Running the above register-only 3$\times$3 median filter through the NVidia CUDA profiler teaches us that the memory throughput achieved by the kernel remains quite low. To improve this, two methods can be used:
330 \item increasing the number of concurrent threads, which can be achieved by reducing the number of registers used by each thread.
331 \item having each thread process more data which can be achieved at thread level by processing and outputting the gray-level value of two pixels or more.
335 \subsubsection{Reducing register count}
336 Our current kernel (\texttt{kernelMedian3RegTri9}) uses one register per gray-level value, which amounts to 9 registers for the entire 3$\times$3 window.
337 This count can be reduced by use of an iterative sorting process called \textit{forgetful selection}, where both \textit{extrema} are eliminated at each sorting stage, until only 3 elements remain. The question is to find out the minimal register count $k_{n^2}$ that allows the selection of the median amoung $n^2$ values. The answer can be evaluated considering that, when eliminating the maximum and the minimum values, one has to make sure not to eliminate the global median value. Such a situation is illustrated in Figure \ref{fig:forgetful_selection} for a 3$\times$3 median filter. For better comprehension, the 9 elements of the 3$\times$3 pixel window have been represented in a row.
340 \includegraphics[width=6cm]{Chapters/chapter3/img/forgetful_selection.png}
341 \caption{Forgetful selection with the minimal element register count. Illustration for 3$\times$3 pixel window represented in a row and supposed sorted.}
342 \label{fig:forgetful_selection}
344 We must remember that, in the fully sorted vector, the median value will have the middle index i.e. $\lfloor n^2/2\rfloor$.
345 Moreover, assuming that both \textit{extrema} are eliminated from the first $k$ elements and that the global median is one of them would mean that:
347 \item if the global median was the minimum among the $k$ elements, then at least $k-1$ elements would have a higher index. Considering the above median definition, at least $k-1$ elements should also have a lower index in the entire vector.
348 \item if the global median was the maximum among the $k$ elements, then at least $k-1$ elements would have a lower index. Considering the above median definition, at least $k-1$ elements should also have a higher index in the entire vector.
350 Therefore, the number $k$ of elements that are part of the first selection stage can be defined by the condition
351 $$n^2-k \leq \lfloor \frac{n^2}{2} \rfloor -1$$
353 $$k_{n^2}=\lceil \frac{n^2}{2}\rceil+1 $$
354 This rule can be applied to the first eliminating stage and remains true with the next ones as each stage suppresses exactly two values, one above and one below the median value.
355 In our 3$\times$3 pixel window example, the minimum register count becomes $k_9=\lceil 9/2\rceil+1 = 6$.
357 The \textit{forgetful selection} method, used in \cite{mcguire2008median} does not imply full sorting of values, but only selecting minimum and maximum values, which, at the price of a few iteration steps ($n^2-k$), reduces arithmetic complexity.
358 Listing \ref{lst:medianForget1pix3} details this process where forgetful selection is achieved by use of simple 2-value sorting function ($s()$, lines 1 to 5) that swaps input values if necessary. Moreover, whenever possible, in order to increase the Instruction-Level Parallelism, successive calls to $s()$ are done with independant elements as arguments. This is illustrated by the macro definitions of lines 7 to 14.
360 \lstinputlisting[label={lst:medianForget1pix3},caption= 3$\times$3 median filter kernel using the minimum register count of 6 to find the median value by forgetful selection method]{Chapters/chapter3/code/kernMedianForget1pix3.cu}
362 Our such modified kernel provides significantly improved runtimes: a speedup of around 16\% is obtained, and pixel throughput reaches around 1000~MPixel/s on C2070.
364 \subsubsection{More data output per thread}
365 In the case of a kernel achieving an effective memory throughput value far from the GPU peak value, and if enough threads are run, another technique may help hiding memory latency and thus leverage performance: make sure that each thread generates multiple pixel outputs.\\
366 Attentive readers could remark that it would increase the register count per thread, which can be compensated by dividing thread block size accordingly, thus allowing to keep the same register count per block.
367 Moreover, it is now possible to take advantage of window overlapping, first illustrated In Figure \ref{fig:median_overlap}, and further detailed in Figure \ref{fig:median3_overlap}. As the selection is first processed on the first 6 gray-level values, i.e. exactly the number of pixels that overlap between the neighborhoods of two adjacent center pixels, 6 texture fetches and one \texttt{minmax6} selection per thread can be saved. There again, some speedup can be expected through our modified kernel source code presented in Listing \ref{lst:medianForget2pix3}. One important difference with previous versions lies in the way pixel coordinates are computed from thread indexes. As each thread has to process two pixels, the number of threads in each block is divided by 2, while the grid size remains unchanged. Consequently, in our kernel code, each thread whose block-related coordinates are $(tx, ty)$ will be in charge of processing pixels of block-related coordinates $(2tx, ty)$ and $(2tx+1, ty)$; lines 5 and 6 implement this.
371 \includegraphics[width=4cm]{Chapters/chapter3/img/median3_overlap.png}
372 \caption{Illustration of how window overlapping is used to combine 2 pixel selections in a 3$\times$3 median kernel.}
373 \label{fig:median3_overlap}
376 \lstinputlisting[label={lst:medianForget2pix3},caption=3$\times$3 median filter kernel processing 2 output pixel values per thread using combined forgetful selection.]{Chapters/chapter3/code/kernMedian2pix3.cu}
378 Running this $3\times 3$ kernel saves another 10\% runtime, as shown in Figure \ref{fig:compMedians2} and provides the best peak pixel throughput value known so far on C2070: 1155~Mpixel/s which is 86\% the maximum effective throughput.
382 \includegraphics[width=11cm]{Chapters/chapter3/img/debitPlot2.pdf}
383 \caption{Comparison of pixel throughput on GPU C2070 for the different 3$\times$3 median kernels.}
384 \label{fig:compMedians2}
387 \section{A 5$\times$5 and more median filter }
388 Considering the maximum register count allowed per thread (63) and trying to push this technique to its limit potentially allows designing up to 9$\times$9 median filters. Such maximum would actually use $k_{81}=\lceil 81/2\rceil+1 = 42$ registers per thread plus 9, used by the compiler to complete arithmetic operations. This leads to a total register count of 51, which would forbid to compute more than one pixel per thread, but also would limit the number of concurrent threads per block. Our measurements show that this technique is still worth using for the 5$\times$5 median. As for larger window sizes, one option could be using shared memory.
389 The next two sections will first detail the particular case of the 5$\times$5 median through register-only method and eventually a generic kernel for larger window sizes.
391 \subsection{A register-only 5$\times$5 median filter \label{sec:median5}}
392 The minimum register count required to apply the forgetful selection method to a 5$\times$5 median filter is $k_{25}=\lceil 25/2\rceil+1 = 14$. Moreover, two adjacent overlapping windows share 20 pixels ($n^2-one\_column$) so that, when processing 2 pixels simultaneously, a count of 7 common selection stages can be carried out from the first selection stage with 14 common values to the processing of the last common value. That allows to limit register count to 22 per thread. Figure \ref{fig:median5overlap} describes the distribution of overlapping pixels, implemented in Listing \ref{lst:medianForget2pix5}: common selection stages take place from line 25 to line 37, while the remaining separate selection stages occur between lines 45 and 62 after the separation of line 40.
395 \includegraphics[width=6cm]{Chapters/chapter3/img/median5_overlap.png}
396 \caption{Reducing register count in a 5$\times$5 register-only median kernel outputting 2 pixels simultaneously. The first 7 forgetful selection stages are common to both processed center pixels. Only the last 5 selections have to be done separately.}
397 \label{fig:median5overlap}
400 \lstinputlisting[label={lst:medianForget2pix5},caption=kernel 5$\times$5 median filter processing 2 output pixel values per thread by a combined forgetfull selection.]{Chapters/chapter3/code/kernMedian2pix5.cu}
402 Timing results follow the same variations with image size as in previously presented kernels. That is why Table \ref{tab:median5comp} shows only throughput values obtained for C2070 card and 4096$\times$4096 pixel image.
405 %\newlength\savedwidth
406 \newcommand\whline{\noalign{\global\savedwidth
407 \arrayrulewidth\global\arrayrulewidth 1.5pt}
408 \hline \noalign{\global\arrayrulewidth
413 \begin{tabular}{|l||c|c|c|c|}
415 \textbf{Implementation}&\shortstack{\textbf{registers only}\\\textbf{1 pix/thread}}&\shortstack{\textbf{registers only}\\\textbf{2 pix/thread}}&\shortstack{\textbf{libJacket}\\(interpolated)}&\shortstack{\textbf{shared mem}}\\\whline
416 \shortstack{\textbf{Throughput}\\\textbf{(MP/s)}}&551&738&152&540\\\hline
419 \caption{Performance of various 5$\times$5 median kernel implementations, applied on 4096$\times$4096 pixel image with C2070 GPU card.}
420 \label{tab:median5comp}
423 \subsection{Fast approximated n$\times$n median filter }
424 Large window median filters are less widespread and used in more specific fields, such as digital microscopy where, for example, background estimation of images is achieved through $64\times 64$ or $128\times 128$ median filters \cite{Wu2010}. In such cases, a possible technique is to split median selection into two separate 1-D stages: one in the vertical direction and the other in the horizontal direction. Image processing specialists may object that this method does not select the actual median value. This is true but, in the case of large window sizes and \textit{real-life} images, the so selected value is statistically near the actual median value and often represents an acceptable approximation. Such a filter is sometimes called \textit{smoother}.
426 As explained earlier in this section, the use of large window median filters rules out register-only implementation,
427 which suggests to privilege the use of shared memory. The 1-D operation almost completely avoids bank conflicts in shared memory accesses.
428 Furthermore, the above-described forgetful selection method cannot be used anymore, as too many registers would be required.\\Instead, the Torben Morgensen sorting algorithm is used, as its required register count is both low and constant, and avoids the use of a local vector, unlike histogram-based methods.
430 Listing \ref{lst:medianSeparable} presents a kernel code that implements the above considerations and achieves a 1-D vertical $n \times 1$ median filter. The shared memory vector is declared as \texttt{extern} (Line 16) as its size is determined at runtime and passed to the kernel call as an argument. Lines 20 to 29 perform data prefetching, including the $2n$-row halo ($n$ at the bottom and $n$ at the top of each block). Then one synchronization barrier is mandatory (line 31) to ensure that all needed data is ready prior to its use by the different threads.
431 Torben Morgensen sorting takes place between lines 37 and 71 and eventually, the transposed output value is stored in global memory at line 73. Outputting the transposed image in global memory saves time and allows to re-use the same kernel to achieve the second step, e.g 1-D horizontal $n \times 1$ median filtering. The final transpose is done at transfer time, when copying data from GPU to CPU memory, which once more saves time while actually generates the expected image.
432 It has to be noticed that this smoother, unlike the technique we proposed for fixed-size median filters, can not be considered as a state-of-the-art technique, as for example the one presented in \cite{4287006}. However, it may be considered as a good, easy to use and efficient alternative as confirmed by the results presented in Table \ref{tab:medianSeparable}. Pixel throughput values achieved by our kernel, though not constant with window size, remain very competitive if window size is kept under $120\times 120$ pixels, especially when outputting 2 pixels per thread (in \cite{4287006}, pixel throughput is around 7MP/s).
433 Figure \ref{fig:sap_examples2} shows an example of a $512\times 512$ pixel image, corrupted by a \textit{salt and pepper} noise and the denoised versions, output respectively by a $3\times 3$, a $5\times 5$ and a $55\times 55 $ separable smoother.
435 \subfigure[Airplane image, corrupted with by salt and pepper noise of density 0.25]{\label{img:sap_example_ref} \includegraphics[width=5cm]{Chapters/chapter3/img/airplane_sap25.png}}\qquad
436 \subfigure[Image denoised by a $3\times 3$ separable smoother]{\label{img:sap_example_sep_med3} \includegraphics[width=5cm]{Chapters/chapter3/img/airplane_sap25_sep_med3.png}}\\
437 \subfigure[Image denoised by a $5\times 5$ separable smoother]{\label{img:sap_example_sep_med5} \includegraphics[width=5cm]{Chapters/chapter3/img/airplane_sap25_sep_med5.png}}\qquad
438 \subfigure[Image background estimation by a $55\times 55$ separable smoother]{\label{img:sap_example_sep_med3_it2} \includegraphics[width=5cm]{Chapters/chapter3/img/airplane_sap25_sep_med111.png}}\\
439 \caption{Exemple of separable median filtering (smoother), applied to salt \& pepper noise reduction.}
440 \label{fig:sap_examples2}
444 %\newlength\savedwidth
445 \newcommand\whline{\noalign{\global\savedwidth
446 \arrayrulewidth\global\arrayrulewidth 1.5pt}
447 \hline \noalign{\global\arrayrulewidth
452 \begin{tabular}{|l||c|c|c|c|}
454 \shortstack{\textbf{Window edge size}\\(in pixels)}&\textbf{41}&\textbf{81}&\textbf{111}&\textbf{121}\\\whline
455 \shortstack{\textbf{Throughput}\\\textbf{(MP/s)}}&54 &27 & 20& 18\\\hline
458 \caption{Measured performance of one generic pseudo-separable median kernel applied to 4096$\times$4096 pixel image with various window sizes.}
459 \label{tab:medianSeparable}
462 \lstinputlisting[label={lst:medianSeparable},caption= generic pseudo median kernel.]{Chapters/chapter3/code/kernMedianSeparable.cu}
466 % \item[CUDA] Compute Unified Device Architecture.
469 \putbib[Chapters/chapter3/biblio3]
