\begin{document}
-\title{Simulation of Asynchronous Iterative Numerical Algorithms Using SimGrid}
+\title{Simulation of Asynchronous Iterative Algorithms Using SimGrid}
\author{%
\IEEEauthorblockN{%
Charles Emile Ramamonjisoa\IEEEauthorrefmark{1},
+ Lilia Ziane Khodja\IEEEauthorrefmark{2},
David Laiymani\IEEEauthorrefmark{1},
- Arnaud Giersch\IEEEauthorrefmark{1},
- Lilia Ziane Khodja\IEEEauthorrefmark{2} and
+ Arnaud Giersch\IEEEauthorrefmark{1} and
Raphaël Couturier\IEEEauthorrefmark{1}
}
\IEEEauthorblockA{\IEEEauthorrefmark{1}%
\maketitle
-\RC{Ordre des auteurs pas définitif.}
\begin{abstract}
-\AG{L'abstract est AMHA incompréhensible et ne donne pas envie de lire la suite.}
-In recent years, the scalability of large-scale implementation in a
-distributed environment of algorithms becoming more and more complex has
-always been hampered by the limits of physical computing resources
-capacity. One solution is to run the program in a virtual environment
-simulating a real interconnected computers architecture. The results are
-convincing and useful solutions are obtained with far fewer resources
-than in a real platform. However, challenges remain for the convergence
-and efficiency of a class of algorithms that concern us here, namely
-numerical parallel iterative algorithms executed in asynchronous mode,
-especially in a large scale level. Actually, such algorithm requires a
-balance and a compromise between computation and communication time
-during the execution. Two important factors determine the success of the
-experimentation: the convergence of the iterative algorithm on a large
-scale and the execution time reduction in asynchronous mode. Once again,
-from the current work, a simulated environment like SimGrid provides
-accurate results which are difficult or even impossible to obtain in a
-physical platform by exploiting the flexibility of the simulator on the
-computing units clusters and the network structure design. Our
-experimental outputs showed a saving of up to \np[\%]{40} for the algorithm
-execution time in asynchronous mode compared to the synchronous one with
-a residual precision up to \np{E-11}. Such successful results open
-perspectives on experimentations for running the algorithm on a
-simulated large scale growing environment and with larger problem size.
-
-\LZK{Long\ldots}
+
+Synchronous iterative algorithms are often less scalable than asynchronous
+iterative ones. Performing large scale experiments with different kind of
+network parameters is not easy because with supercomputers such parameters are
+fixed. So one solution consists in using simulations first in order to analyze
+what parameters could influence or not the behaviors of an algorithm. In this
+paper, we show that it is interesting to use SimGrid to simulate the behaviors
+of asynchronous iterative algorithms. For that, we compare the behaviour of a
+synchronous GMRES algorithm with an asynchronous multisplitting one with
+simulations in which we choose some parameters. Both codes are real MPI
+codes. Simulations allow us to see when the multisplitting algorithm can be more
+efficient than the GMRES one to solve a 3D Poisson problem.
+
% no keywords for IEEE conferences
% Keywords: Algorithm distributed iterative asynchronous simulation SimGrid
increasing complexity of these requested applications combined with a continuous increase of their sizes lead to write
distributed and parallel algorithms requiring significant hardware resources (grid computing, clusters, broadband
network, etc.) but also a non-negligible CPU execution time. We consider in this paper a class of highly efficient
-parallel algorithms called \emph{numerical iterative algorithms} executed in a distributed environment. As their name
+parallel algorithms called \emph{iterative algorithms} executed in a distributed environment. As their name
suggests, these algorithms solve a given problem by successive iterations ($X_{n +1} = f(X_{n})$) from an initial value
$X_{0}$ to find an approximate value $X^*$ of the solution with a very low residual error. Several well-known methods
demonstrate the convergence of these algorithms~\cite{BT89,Bahi07}.
synchronous case, AIAC algorithms can significantly reduce overall execution times by suppressing idle times due to
synchronizations especially in a grid computing context (see~\cite{Bahi07} for more details).
-Parallel numerical applications (synchronous or asynchronous) may have different
-configuration and deployment requirements. Quantifying their resource
-allocation policies and application scheduling algorithms in grid computing
-environments under varying load, CPU power and network speeds is very costly,
-very labor intensive and very time
-consuming~\cite{Calheiros:2011:CTM:1951445.1951450}. The case of AIAC
-algorithms is even more problematic since they are very sensible to the
+Parallel (synchronous or asynchronous) applications may have different
+configuration and deployment requirements. Quantifying their resource
+allocation policies and application scheduling algorithms in grid computing
+environments under varying load, CPU power and network speeds is very costly,
+very labor intensive and very time
+consuming~\cite{Calheiros:2011:CTM:1951445.1951450}. The case of AIAC
+algorithms is even more problematic since they are very sensible to the
execution environment context. For instance, variations in the network bandwidth
-(intra and inter-clusters), in the number and the power of nodes, in the number
-of clusters\dots{} can lead to very different number of iterations and so to
-very different execution times. Then, it appears that the use of simulation
-tools to explore various platform scenarios and to run large numbers of
-experiments quickly can be very promising. In this way, the use of a simulation
-environment to execute parallel iterative algorithms found some interests in
-reducing the highly cost of access to computing resources: (1) for the
-applications development life cycle and in code debugging (2) and in production
-to get results in a reasonable execution time with a simulated infrastructure
-not accessible with physical resources. Indeed, the launch of distributed
-iterative asynchronous algorithms to solve a given problem on a large-scale
-simulated environment challenges to find optimal configurations giving the best
+(intra and inter-clusters), in the number and the power of nodes, in the number
+of clusters\dots{} can lead to very different number of iterations and so to
+very different execution times. Then, it appears that the use of simulation
+tools to explore various platform scenarios and to run large numbers of
+experiments quickly can be very promising. In this way, the use of a simulation
+environment to execute parallel iterative algorithms found some interests in
+reducing the highly cost of access to computing resources: (1) for the
+applications development life cycle and in code debugging (2) and in production
+to get results in a reasonable execution time with a simulated infrastructure
+not accessible with physical resources. Indeed, the launch of distributed
+iterative asynchronous algorithms to solve a given problem on a large-scale
+simulated environment challenges to find optimal configurations giving the best
results with a lowest residual error and in the best of execution time.
-To our knowledge, there is no existing work on the large-scale simulation of a
-real AIAC application. The aim of this paper is twofold. First we give a first
-approach of the simulation of AIAC algorithms using a simulation tool (i.e. the
-SimGrid toolkit~\cite{SimGrid}). Second, we confirm the effectiveness of
-asynchronous mode algorithms by comparing their performance with the synchronous
-mode. More precisely, we had implemented a program for solving large
-linear system of equations by numerical method GMRES (Generalized
-Minimal Residual) \cite{ref1}. We show, that with minor modifications of the
-initial MPI code, the SimGrid toolkit allows us to perform a test campaign of a
-real AIAC application on different computing architectures. The simulated
-results we obtained are in line with real results exposed in ??\AG[]{ref?}.
-SimGrid had allowed us to launch the application from a modest computing
-infrastructure by simulating different distributed architectures composed by
-clusters nodes interconnected by variable speed networks. With selected
-parameters on the network platforms (bandwidth, latency of inter cluster
-network) and on the clusters architecture (number, capacity calculation power)
-in the simulated environment, the experimental results have demonstrated not
-only the algorithm convergence within a reasonable time compared with the
-physical environment performance, but also a time saving of up to \np[\%]{40} in
-asynchronous mode.
-\AG{Il faudrait revoir la phrase précédente (couper en deux?). Là, on peut
- avoir l'impression que le gain de \np[\%]{40} est entre une exécution réelle
- et une exécution simulée!}
-
-This article is structured as follows: after this introduction, the next section will give a brief description of
-iterative asynchronous model. Then, the simulation framework SimGrid is presented with the settings to create various
-distributed architectures. The algorithm of the multisplitting method used by GMRES \LZK{??? GMRES n'utilise pas la méthode de multisplitting! Sinon ne doit on pas expliquer le choix d'une méthode de multisplitting?} written with MPI primitives and
-its adaptation to SimGrid with SMPI (Simulated MPI) is detailed in the next section. At last, the experiments results
-carried out will be presented before some concluding remarks and future works.
+To our knowledge, there is no existing work on the large-scale simulation of a
+real AIAC application. {\bf The contribution of the present paper can be
+ summarised in two main points}. First we give a first approach of the
+simulation of AIAC algorithms using a simulation tool (i.e. the SimGrid
+toolkit~\cite{SimGrid}). Second, we confirm the effectiveness of the
+asynchronous multisplitting algorithm by comparing its performance with the
+synchronous GMRES (Generalized Minimal Residual) \cite{ref1}. Both these codes
+can be used to solve large linear systems. In this paper, we focus on a 3D
+Poisson problem. We show, that with minor modifications of the initial MPI
+code, the SimGrid toolkit allows us to perform a test campaign of a real AIAC
+application on different computing architectures.
+% The simulated results we
+%obtained are in line with real results exposed in ??\AG[]{ref?}.
+SimGrid had allowed us to launch the application from a modest computing
+infrastructure by simulating different distributed architectures composed by
+clusters nodes interconnected by variable speed networks. Parameters of the
+network platforms are the bandwidth and the latency of inter cluster
+network. Parameters on the cluster's architecture are the number of machines and
+the computation power of a machine. Simulations show that the asynchronous
+multisplitting algorithm can solve the 3D Poisson problem approximately twice
+faster than GMRES with two distant clusters.
+
+
+
+This article is structured as follows: after this introduction, the next section
+will give a brief description of iterative asynchronous model. Then, the
+simulation framework SimGrid is presented with the settings to create various
+distributed architectures. Then, the multisplitting method is presented, it is
+based on GMRES to solve each block obtained of the splitting. This code is
+written with MPI primitives and its adaptation to SimGrid with SMPI (Simulated
+MPI) is detailed in the next section. At last, the simulation results carried
+out will be presented before some concluding remarks and future works.
\section{Motivations and scientific context}
\end{array} \right)
\end{equation*}
in such a way that successive rows of matrix $A$ and both vectors $x$ and $b$
-are assigned to one cluster, where for all $\ell,m\in\{1,\ldots,L\}$ $A_{\ell
+are assigned to one cluster, where for all $\ell,m\in\{1,\ldots,L\}$, $A_{\ell
m}$ is a rectangular block of $A$ of size $n_\ell\times n_m$, $X_\ell$ and
-$B_\ell$ are sub-vectors of $x$ and $b$, respectively, of size $n_\ell$ each and
-$\sum_{\ell} n_\ell=\sum_{m} n_m=n$.
+$B_\ell$ are sub-vectors of $x$ and $b$, respectively, of size $n_\ell$ each,
+and $\sum_{\ell} n_\ell=\sum_{m} n_m=n$.
The multisplitting method proceeds by iteration to solve in parallel the linear system on $L$ clusters of processors, in such a way each sub-system
\begin{equation}
study that the results depend on the following parameters:
\begin{itemize}
\item At the network level, we found that the most critical values are the
- bandwidth (bw) and the network latency (lat).
+ bandwidth and the network latency.
\item Hosts power (GFlops) can also influence on the results.
\item Finally, when submitting job batches for execution, the arguments values
- passed to the program like the maximum number of iterations or the
- \textit{external} precision are critical. They allow to ensure not only the
- convergence of the algorithm but also to get the main objective of the
- experimentation of the simulation in having an execution time in asynchronous
- less than in synchronous mode. The ratio between the execution time of asynchronous compared to the synchronous mode is defined as the "relative gain". So, our objective running the algorithm in SimGrid is to obtain a relative gain greater than 1.
+ passed to the program like the maximum number of iterations or the external
+ precision are critical. They allow to ensure not only the convergence of the
+ algorithm but also to get the main objective of the experimentation of the
+ simulation in having an execution time in asynchronous less than in
+ synchronous mode. The ratio between the execution time of asynchronous
+ compared to the synchronous mode is defined as the \emph{relative gain}. So,
+ our objective running the algorithm in SimGrid is to obtain a relative gain
+ greater than 1.
+ \AG{$t_\text{async} / t_\text{sync} > 1$, l'objectif est donc que ça dure plus
+ longtemps (que ça aille moins vite) en asynchrone qu'en synchrone ?
+ Ce n'est pas plutôt l'inverse ?}
\end{itemize}
-A priori, obtaining a relative gain greater than 1 would be difficult in a local area
-network configuration where the synchronous mode will take advantage on the
+A priori, obtaining a relative gain greater than 1 would be difficult in a local
+area network configuration where the synchronous mode will take advantage on the
rapid exchange of information on such high-speed links. Thus, the methodology
adopted was to launch the application on clustered network. In this last
-configuration, degrading the inter-cluster network performance will
-\textit{penalize} the synchronous mode allowing to get a relative gain greater than 1.
-This action simulates the case of distant clusters linked with long distance network
-like Internet.
-
+configuration, degrading the inter-cluster network performance will penalize the
+synchronous mode allowing to get a relative gain greater than 1. This action
+simulates the case of distant clusters linked with long distance network like
+Internet.
+
+\AG{Cette partie sur le poisson 3D
+ % on sait donc que ce n'est pas une plie ou une sole (/me fatigué)
+ n'est pas à sa place. Elle devrait être placée plus tôt.}
In this paper, we solve the 3D Poisson problem whose the mathematical model is
\begin{equation}
\left\{
As a first step, the algorithm was run on a network consisting of two clusters
containing 50 hosts each, totaling 100 hosts. Various combinations of the above
-factors have providing the results shown in Table~\ref{tab.cluster.2x50} with a
+factors have provided the results shown in Table~\ref{tab.cluster.2x50} with a
matrix size ranging from $N_x = N_y = N_z = \text{62}$ to 171 elements or from
$\text{62}^\text{3} = \text{\np{238328}}$ to $\text{171}^\text{3} =
\text{\np{5000211}}$ entries.
\begin{mytable}{6}
\hline
- bw
+ bandwidth
& 5 & 5 & 5 & 5 & 5 & 50 \\
\hline
- lat
+ latency
& 0.02 & 0.02 & 0.02 & 0.02 & 0.02 & 0.02 \\
\hline
power
& 62 & 62 & 62 & 100 & 100 & 110 \\
\hline
Prec/Eprec
- & \np{E-5} & \np{E-8} & \np{E-9} & \np{E-11} & \np{E-11} & \np{E-11} \\
+ & \np{E-5} & \np{E-8} & \np{E-9} & \np{E-11} & \np{E-11} & \np{E-11} \\
+ \hline
\hline
Relative gain
& 2.52 & 2.55 & 2.52 & 2.57 & 2.54 & 2.53 \\
\hline
\end{mytable}
- \smallskip
+ \bigskip
\begin{mytable}{6}
\hline
- bw
+ bandwidth
& 50 & 50 & 50 & 50 & 10 & 10 \\
\hline
- lat
+ latency
& 0.02 & 0.02 & 0.02 & 0.02 & 0.03 & 0.01 \\
\hline
power
Prec/Eprec
& \np{E-11} & \np{E-11} & \np{E-11} & \np{E-11} & \np{E-5} & \np{E-5} \\
\hline
+ \hline
Relative gain
& 2.51 & 2.58 & 2.55 & 2.54 & 1.59 & 1.29 \\
\hline
\begin{mytable}{6}
\hline
- bw
+ bandwidth
& 10 & 5 & 4 & 3 & 2 & 6 \\
\hline
- lat
+ latency
& 0.01 & 0.02 & 0.02 & 0.02 & 0.02 & 0.02 \\
\hline
power
Prec/Eprec
& \np{E-5} & \np{E-5} & \np{E-5} & \np{E-5} & \np{E-5} & \np{E-5} \\
\hline
+ \hline
Relative gain
& 1.003 & 1.01 & 1.08 & 1.19 & 1.28 & 1.01 \\
\hline
\begin{mytable}{1}
\hline
- bw & 1 \\
+ bandwidth & 1 \\
\hline
- lat & 0.02 \\
+ latency & 0.02 \\
\hline
power & 1 \\
\hline
\hline
Prec/Eprec & \np{E-5} \\
\hline
+ \hline
Relative gain & 1.11 \\
\hline
\end{mytable}
~\\{}\AG{Donner un peu plus de précisions (plateforme en particulier).}
\begin{itemize}
- \item HOSTFILE: Hosts file description.
- \item PLATFORM: file description of the platform architecture : clusters (CPU power,
-\dots{}), intra cluster network description, inter cluster network (bandwidth bw,
-lat latency, \dots{}).
+\item HOSTFILE: Hosts file description.
+\item PLATFORM: file description of the platform architecture : clusters (CPU
+ power, \dots{}), intra cluster network description, inter cluster network
+ (bandwidth, latency, \dots{}).
\end{itemize}
CPU power of \np[\%]{50} to \np[GFlops]{1.5} for a convergence of the algorithm
with the same order of asynchronous mode efficiency. Maintaining such a system
power but this time, increasing network throughput inter cluster up to
-\np[Mbit/s]{50}, the result of efficiency with a relative gain of 1.5 is obtained with
+\np[Mbit/s]{50}, the result of efficiency with a relative gain of 1.5\AG[]{2.5 ?} is obtained with
high external precision of \np{E-11} for a matrix size from 110 to 150 side
elements.
(synchronous and asynchronous) is achieved with an inter cluster of
\np[Mbit/s]{10} and a latency of \np[ms]{E-1}. To challenge an efficiency greater than 1.2 with a matrix size of 100 points, it was necessary to degrade the
inter cluster network bandwidth from 5 to \np[Mbit/s]{2}.
+\AG{Conclusion, on prend une plateforme pourrie pour avoir un bon ratio sync/async ???
+ Quelle est la perte de perfs en faisant ça ?}
A last attempt was made for a configuration of three clusters but more powerful
with 200 nodes in total. The convergence with a relative gain around 1.1 was
\RC{Est ce qu'on sait expliquer pourquoi il y a une telle différence entre les résultats avec 2 et 3 clusters... Avec 3 clusters, ils sont pas très bons... Je me demande s'il ne faut pas les enlever...}
\RC{En fait je pense avoir la réponse à ma remarque... On voit avec les 2 clusters que le gain est d'autant plus grand qu'on choisit une bonne précision. Donc, plusieurs solutions, lancer rapidement un long test pour confirmer ca, ou enlever des tests... ou on ne change rien :-)}
-\LZK{Ma question est: le bw et lat sont ceux inter-clusters ou pour les deux inter et intra cluster??}
+\LZK{Ma question est: le bandwidth et latency sont ceux inter-clusters ou pour les deux inter et intra cluster??}
\section{Conclusion}
The experimental results on executing a parallel iterative algorithm in
% LocalWords: Parallelization AIAC GMRES multi SMPI SISC SIAC SimDAG DAGs Lua
% LocalWords: Fortran GFlops priori Mbit de du fcomte multisplitting scalable
% LocalWords: SimGrid Belfort parallelize Labex ANR LABX IEEEabrv hpccBib
+% LocalWords: intra durations nonsingular Waitall discretization discretized
+% LocalWords: InnerSolver Isend Irecv
