\maketitle
\begin{abstract}
-Computing platforms are consuming more and more energy due to the increase of the number of nodes composing them. To minimize the operating costs of these platforms many techniques have been used. Dynamic voltage and frequency scaling (DVFS) is one of them, it reduces the frequency of a CPU to lower its energy consumption. However, lowering the frequency of a CPU might increase the execution time of an application running on that processor. Therefore, the frequency that gives the best tradeoff between the energy consumption and the performance of an application must be selected.
-
-In this paper, a new online frequencies selecting algorithm for heterogeneous platforms is presented. It selects the frequency that gives the best tradeoff between energy saving and
-performance degradation, for each node computing the message passing iterative application. The algorithm has a small overhead and works without training or profiling.
-It uses a new energy model for message passing iterative applications running on a heterogeneous platform.
-The proposed algorithm was evaluated on the Simgrid simulator while running the NAS parallel benchmarks.
-The experiments demonstrated that it reduces the energy consumption up to 35\% while limiting the performance degradation as much as possible.
+Computing platforms are consuming more and more energy due to the increase of the number of nodes composing them.
+To minimize the operating costs of these platforms many techniques have been used. Dynamic voltage and frequency
+scaling (DVFS) is one of them, it reduces the frequency of a CPU to lower its energy consumption. However,
+lowering the frequency of a CPU might increase the execution time of an application running on that processor.
+Therefore, the frequency that gives the best tradeoff between the energy consumption and the performance of an
+application must be selected.
+
+In this paper, a new online frequencies selecting algorithm for heterogeneous platforms is presented.
+It selects the frequency that gives the best tradeoff between energy saving and performance degradation,
+for each node computing the message passing iterative application. The algorithm has a small overhead and
+works without training or profiling. It uses a new energy model for message passing iterative applications
+running on a heterogeneous platform. The proposed algorithm was evaluated on the Simgrid simulator while
+running the NAS parallel benchmarks. The experiments demonstrated that it reduces the energy consumption
+up to 35\% while limiting the performance degradation as much as possible.
\end{abstract}
\section{Introduction}
\label{sec.intro}
-The need for more computing power is continually increasing. To partially satisfy this need, most supercomputers constructors just put more computing nodes in their platform. The resulting platform might achieve higher floating point operations per second (FLOPS), but the energy consumption and the heat dissipation are also increased. As an example, the chinese supercomputer Tianhe-2 had the highest FLOPS in November 2014 according to the Top500 list \cite{TOP500_Supercomputers_Sites}. However, it was also the most power hungry platform with its over 3 millions cores consuming around 17.8 megawatts.
-Moreover, according to the U.S. annual energy outlook 2014
+The need for more computing power is continually increasing. To partially satisfy this need, most supercomputers
+constructors just put more computing nodes in their platform. The resulting platform might achieve higher floating
+point operations per second (FLOPS), but the energy consumption and the heat dissipation are also increased.
+As an example, the chinese supercomputer Tianhe-2 had the highest FLOPS in November 2014 according to the Top500
+list \cite{TOP500_Supercomputers_Sites}. However, it was also the most power hungry platform with its over 3 millions
+cores consuming around 17.8 megawatts. Moreover, according to the U.S. annual energy outlook 2014
\cite{U.S_Annual.Energy.Outlook.2014}, the price of energy for 1 megawatt-hour
was approximately equal to \$70.
Therefore, the price of the energy consumed by the
Tianhe-2 platform is approximately more than \$10 millions each year.
-The computing platforms must be more energy efficient and offer the highest number of FLOPS per watt possible, such as the TSUBAME-KFC at the GSIC center of Tokyo which
+The computing platforms must be more energy efficient and offer the highest number of FLOPS per watt possible,
+such as the TSUBAME-KFC at the GSIC center of Tokyo which
became the top of the Green500 list in June 2014 \cite{Green500_List}.
This heterogeneous platform executes more than four GFLOPS per watt.
- Besides hardware improvements, there are many software techniques to lower the energy consumption of these platforms, such as scheduling, DVFS, ... DVFS is a widely used process to reduce the energy
-consumption of a processor by lowering its frequency. \textbf{put a reference to DVFS} However, it also the reduces the number of FLOPS executed by the processor which might increase the execution time of the application running over that processor.
-Therefore, researchers used different optimization strategies to select the frequency that gives the best tradeoff between the energy reduction and
-performance degradation ratio.
-\textbf{you should talk about the first paper here and say that the algorithm was applied to a homogeneous platform then define what is a heterogeneous platform, you can take it from the firdt paragraph in section 3 }
+Besides hardware improvements, there are many software techniques to lower the energy consumption of these platforms,
+such as scheduling, DVFS, ... DVFS is a widely used process to reduce the energy consumption of a processor by lowering
+its frequency \cite{Rizvandi_Some.Observations.on.Optimal.Frequency}. However, it also the reduces the number of FLOPS
+executed by the processor which might increase the execution time of the application running over that processor.
+Therefore, researchers used different optimization strategies to select the frequency that gives the best tradeoff
+between the energy reduction and
+performance degradation ratio. \textbf{In our previous paper \cite{Our_first_paper}, a frequency selecting algorithm
+was proposed for distributed iterative application running over homogeneous platform. While in this paper the algorithm is significantly adapted to run over a heterogeneous platform. This platform is a collection of heterogeneous computing nodes interconnected via a high speed homogeneous network.}
-In this paper, a frequency selecting algorithm is proposed. It selects the vector of frequencies for a heterogeneous platform that runs a message passing iterative application, that gives the maximum energy reduction and minimum
+The proposed frequency selecting algorithm selects the vector of frequencies for a heterogeneous platform that runs a message passing iterative application, that gives the maximum energy reduction and minimum
performance degradation ratio simultaneously. The algorithm has a very small
overhead, works online and does not need any training or profiling.
model that predicts the energy consumption of an application running over a heterogeneous platform. Section~\ref{sec.compet} presents
the energy-performance objective function that maximizes the reduction of energy
consumption while minimizing the degradation of the program's performance.
-Section~\ref{sec.optim} details the proposed frequency selecting algorithm then the precision of the proposed algorithm is verified.\textbf{the verification should be put here}
+Section~\ref{sec.optim} details the proposed frequency selecting algorithm then the precision of the proposed algorithm is verified.
Section~\ref{sec.expe} presents the results of applying the algorithm on the NAS parallel benchmarks and executing them
on a heterogeneous platform. It also shows the results of running three
different power scenarios and comparing them.
Finally, we conclude in Section~\ref{sec.concl} with a summary and some future works.
-\textbf{never use we in an article and the algorithm is not heterogeneous! you cannot use scaling factors before defining what they are.}
\section{Related works}
\label{sec.relwork}
DVFS is a technique enabled
\item a new online frequency selecting algorithm for heterogeneous platforms. The algorithm has a very small
overhead and does not need for any training or profiling. It uses a new optimization function which simultaneously maximizes the performance and minimizes the energy consumption of a message passing iterative synchronous application .
+
\end{enumerate}
\section{The performance and energy consumption measurements on heterogeneous architecture}
\label{sec.exe}
-% \JC{The whole subsection ``Parallel Tasks Execution on Homogeneous Platform'',
-% can be deleted if we need space, we can just say we are interested in this
-% paper in homogeneous clusters}
+
\subsection{The execution time of message passing distributed
iterative applications on a heterogeneous platform}
where $TcpOld_i$ is the computation time of processor $i$ during the first
iteration and $MinTcm$ is the communication time of the slowest processor from
the first iteration. The model computes the maximum computation time
-with scaling factor from each node added to the communication time of the
+with scaling factor from each node added to the communication time of the \subsection{The verifications of the proposed method}
+\label{sec.verif}
+The precision of the proposed algorithm mainly depends on the execution time prediction model defined in
+EQ(\ref{eq:perf}) and the energy model computed by EQ(\ref{eq:energy}).
+The energy model is also significantly dependent on the execution time model because the static energy is
+linearly related the execution time and the dynamic energy is related to the computation time. So, all of
+the work presented in this paper is based on the execution time model. To verify this model, the predicted
+execution time was compared to the real execution time over Simgrid for all the NAS parallel benchmarks
+running class B on 8 or 9 nodes. The comparison showed that the proposed execution time model is very precise,
+the maximum normalized difference between the predicted execution time and the real execution time is equal
+to 0.03 for all the NAS benchmarks.
+
+Since the proposed algorithm is not an exact method and do not test all the possible solutions (vectors of scaling factors)
+in the search space and to prove its efficiency, it was compared on small instances to a brute force search algorithm
+that tests all the possible solutions. The brute force algorithm was applied to different NAS benchmarks classes with
+different number of nodes. The solutions returned by the brute force algorithm and the proposed algorithm were identical
+and the proposed algorithm was on average 10 times faster than the brute force algorithm. It has a small execution time:
+for a heterogeneous cluster composed of four different types of nodes having the characteristics presented in
+table~(\ref{table:platform}), it takes on average \np[ms]{0.04} for 4 nodes and \np[ms]{0.15} on average for 144 nodes
+to compute the best scaling factors vector. The algorithm complexity is $O(F\cdot (N \cdot4) )$, where $F$ is the number
+of iterations and $N$ is the number of computing nodes. The algorithm needs from 12 to 20 iterations to select the best
+vector of frequency scaling factors that gives the results of the sections (\ref{sec.res}) and (\ref{sec.compare}).
slowest node, it means only the communication time without any slack time.
Therefore, we can consider the execution time of the iterative application is
equal to the execution time of one iteration as in EQ(\ref{eq:perf}) multiplied
\section{The scaling factors selection algorithm for heterogeneous platforms }
\label{sec.optim}
+\subsection{The algorithm details}
In this section we propose algorithm~(\ref{HSA}) which selects the frequency scaling factors
vector that gives the best trade-off between minimizing the energy consumption and maximizing
the performance of a message passing synchronous iterative application executed on a heterogeneous
\label{dvfs}
\end{algorithm}
+\subsection{The verifications of the proposed algorithm}
+\label{sec.verif}
+The precision of the proposed algorithm mainly depends on the execution time prediction model defined in
+EQ(\ref{eq:perf}) and the energy model computed by EQ(\ref{eq:energy}).
+The energy model is also significantly dependent on the execution time model because the static energy is
+linearly related the execution time and the dynamic energy is related to the computation time. So, all of
+the work presented in this paper is based on the execution time model. To verify this model, the predicted
+execution time was compared to the real execution time over SimGrid/SMPI simulator, v3.10~\cite{casanova+giersch+legrand+al.2014.versatile},
+for all the NAS parallel benchmarks NPB v3.3
+\cite{NAS.Parallel.Benchmarks}, running class B on 8 or 9 nodes. The comparison showed that the proposed execution time model is very precise,
+the maximum normalized difference between the predicted execution time and the real execution time is equal
+to 0.03 for all the NAS benchmarks.
+
+Since the proposed algorithm is not an exact method and do not test all the possible solutions (vectors of scaling factors)
+in the search space and to prove its efficiency, it was compared on small instances to a brute force search algorithm
+that tests all the possible solutions. The brute force algorithm was applied to different NAS benchmarks classes with
+different number of nodes. The solutions returned by the brute force algorithm and the proposed algorithm were identical
+and the proposed algorithm was on average 10 times faster than the brute force algorithm. It has a small execution time:
+for a heterogeneous cluster composed of four different types of nodes having the characteristics presented in
+table~(\ref{table:platform}), it takes on average \np[ms]{0.04} for 4 nodes and \np[ms]{0.15} on average for 144 nodes
+to compute the best scaling factors vector. The algorithm complexity is $O(F\cdot (N \cdot4) )$, where $F$ is the number
+of iterations and $N$ is the number of computing nodes. The algorithm needs from 12 to 20 iterations to select the best
+vector of frequency scaling factors that gives the results of the next sections.
+
\section{Experimental results}
\label{sec.expe}
To evaluate the efficiency and the overall energy consumption reduction of algorithm~(\ref{HSA}),
-it was applied to the NAS parallel benchmarks NPB v3.3 \cite{NAS.Parallel.Benchmarks}. The experiments were executed
-on the simulator SimGrid/SMPI v3.10~\cite{casanova+giersch+legrand+al.2014.versatile} which offers
-easy tools to create a heterogeneous platform and run message passing applications over it. The
-heterogeneous platform that was used in the experiments, had one core per node because just one
-process was executed per node. The heterogeneous platform was composed of four types of nodes.
-Each type of nodes had different characteristics such as the maximum CPU frequency, the number of
+it was applied to the NAS parallel benchmarks NPB v3.3. The experiments were executed
+on the simulator SimGrid/SMPI which offers easy tools to create a heterogeneous platform and run
+message passing applications over it. The heterogeneous platform that was used in the experiments,
+had one core per node because just one process was executed per node.
+The heterogeneous platform was composed of four types of nodes. Each type of nodes had different
+characteristics such as the maximum CPU frequency, the number of
available frequencies and the computational power, see table (\ref{table:platform}). The characteristics
of these different types of nodes are inspired from the specifications of real Intel processors.
The heterogeneous platform had up to 144 nodes and had nodes from the four types in equal proportions,
-\subsection{The verifications of the proposed method}
-\label{sec.verif}
-The precision of the proposed algorithm mainly depends on the execution time prediction model defined in
-EQ(\ref{eq:perf}) and the energy model computed by EQ(\ref{eq:energy}).
-The energy model is also significantly dependent on the execution time model because the static energy is
-linearly related the execution time and the dynamic energy is related to the computation time. So, all of
-the work presented in this paper is based on the execution time model. To verify this model, the predicted
-execution time was compared to the real execution time over Simgrid for all the NAS parallel benchmarks
-running class B on 8 or 9 nodes. The comparison showed that the proposed execution time model is very precise,
-the maximum normalized difference between the predicted execution time and the real execution time is equal
-to 0.03 for all the NAS benchmarks.
-Since the proposed algorithm is not an exact method and do not test all the possible solutions (vectors of scaling factors)
-in the search space and to prove its efficiency, it was compared on small instances to a brute force search algorithm
-that tests all the possible solutions. The brute force algorithm was applied to different NAS benchmarks classes with
-different number of nodes. The solutions returned by the brute force algorithm and the proposed algorithm were identical
-and the proposed algorithm was on average 10 times faster than the brute force algorithm. It has a small execution time:
-for a heterogeneous cluster composed of four different types of nodes having the characteristics presented in
-table~(\ref{table:platform}), it takes on average \np[ms]{0.04} for 4 nodes and \np[ms]{0.15} on average for 144 nodes
-to compute the best scaling factors vector. The algorithm complexity is $O(F\cdot (N \cdot4) )$, where $F$ is the number
-of iterations and $N$ is the number of computing nodes. The algorithm needs from 12 to 20 iterations to select the best
-vector of frequency scaling factors that gives the results of the sections (\ref{sec.res}) and (\ref{sec.compare}) .
\section{Conclusion}
-\label{sec.concl}
-In this paper, we have presented a new online heterogeneous scaling algorithm
-that selects the best possible vector of frequency scaling factors. This vector
-gives the maximum distance (optimal tradeoff) between the normalized energy and
-the performance curves. In addition, we developed a new energy model for measuring
+\label{sec.concl}
+In this paper, we have presented a new online selecting frequency scaling factors algorithm
+that selects the best possible vector of frequency scaling factors for a heterogeneous platform.
+This vector gives the maximum distance (optimal tradeoff) between the predicted energy and
+the predicted performance curves. In addition, we developed a new energy model for measuring
and predicting the energy of distributed iterative applications running over heterogeneous
cluster. The proposed method evaluated on Simgrid/SMPI simulator to built a heterogeneous
platform to executes NAS parallel benchmarks. The results of the experiments showed the ability of
