enhanced version of the multisplitting method as Algo-3. In addition,
SIMGRID simulator has been chosen to simulate the behaviors of the
distributed applications. SIMGRID is running on the Mesocentre
-datacenter in Franche-Comte University $[$10$]$ but also in a virtual
+datacenter in Franche-Comte University but also in a virtual
machine on a laptop.
\textbf{Step 3} : Fix the criteria which will be used for the future
application is the network configuration. Two main network parameters
can modify drastically the program output results : (i) the network
bandwidth (bw=bits/s) also known as "the data-carrying capacity"
-$[$13$]$ of the network is defined as the maximum of data that can pass
+of the network is defined as the maximum of data that can pass
from one point to another in a unit of time. (ii) the network latency
(lat : microsecond) defined as the delay from the start time to send the
data from a source and the final time the destination have finished to
should figure out that, for various grid parameters values, the
simulator will confirm the targeted outcomes, particularly for poor and
slow networks, focusing on the impact on the communication performance
-on the chosen class of algorithm $[$12$]$.
+on the chosen class of algorithm.
The following paragraphs present the test conditions, the output results
and our comments.
Input matrix size & N$_{x}$ =150 x 150 x 150 and\\ %\hline
- & N$_{x}$ =170 x 170 x 170 \\ \hline
\end{tabular}
-\end{footnotesize}
+Table 1 : Clusters x Nodes with NX=150 or NX=170 \\
+\end{footnotesize}
- Table 1 : Clusters x Nodes with NX=150 or NX=170
+
%\RCE{J'ai voulu mettre les tableaux des données mais je pense que c'est inutile et ça va surcharger}
iterations of classical GMRES for a given input matrix size; it is not
the case for the multisplitting method.
-%\begin{wrapfigure}{l}{60mm}
+%\begin{wrapfigure}{l}{100mm}
\begin{figure} [ht!]
\centering
-\includegraphics[width=60mm]{cluster_x_nodes_nx_150_and_nx_170.pdf}
+\includegraphics[width=100mm]{cluster_x_nodes_nx_150_and_nx_170.pdf}
\caption{Cluster x Nodes NX=150 and NX=170}
%\label{overflow}}
\end{figure}
(compared with the classical GMRES) when scaling up to higher input
matrix size.
-\textit{3.b Running on various computational grid architecture}
+\textit{\\3.b Running on various computational grid architecture\\}
% environment
\begin{footnotesize}
- & N2 : bw=1Gbs-lat=5E-05 \\
Input matrix size & N$_{x}$ =150 x 150 x 150\\ \hline \\
\end{tabular}
-\end{footnotesize}
+Table 2 : Clusters x Nodes - Networks N1 x N2 \\
+
+ \end{footnotesize}
-%Table 2 : Clusters x Nodes - Networks N1 x N2
-%\RCE{idem pour tous les tableaux de donnees}
-%\begin{wrapfigure}{l}{60mm}
+%\begin{wrapfigure}{l}{100mm}
\begin{figure} [ht!]
\centering
-\includegraphics[width=60mm]{cluster_x_nodes_n1_x_n2.pdf}
+\includegraphics[width=100mm]{cluster_x_nodes_n1_x_n2.pdf}
\caption{Cluster x Nodes N1 x N2}
%\label{overflow}}
\end{figure}
when the network speed drops down, the difference between the execution
times can reach more than 25\%.
-\textit{3.c Network latency impacts on performance}
+\textit{\\3.c Network latency impacts on performance\\}
% environment
\begin{footnotesize}
Network & N1 : bw=1Gbs \\ %\hline
Input matrix size & N$_{x}$ =150 x 150 x 150\\ \hline\\
\end{tabular}
+
+Table 3 : Network latency impact \\
+
\end{footnotesize}
-Table 3 : Network latency impact
\begin{figure} [ht!]
\centering
-\includegraphics[width=60mm]{network_latency_impact_on_execution_time.pdf}
+\includegraphics[width=100mm]{network_latency_impact_on_execution_time.pdf}
\caption{Network latency impact on execution time}
%\label{overflow}}
\end{figure}
the multisplitting, even though, the performance was on the same order
of magnitude with a latency of 8.10$^{-6}$.
-\textit{3.d Network bandwidth impacts on performance}
+\textit{\\3.d Network bandwidth impacts on performance\\}
% environment
\begin{footnotesize}
Network & N1 : bw=1Gbs - lat=5E-05 \\ %\hline
Input matrix size & N$_{x}$ =150 x 150 x 150\\ \hline
\end{tabular}
+
+Table 4 : Network bandwidth impact \\
+
\end{footnotesize}
-Table 4 : Network bandwidth impact
\begin{figure} [ht!]
\centering
-\includegraphics[width=60mm]{network_bandwith_impact_on_execution_time.pdf}
+\includegraphics[width=100mm]{network_bandwith_impact_on_execution_time.pdf}
\caption{Network bandwith impact on execution time}
%\label{overflow}
\end{figure}
presents a better performance in the considered bandwidth interval with
a gain of 40\% which is only around 24\% for classical GMRES.
-\textit{3.e Input matrix size impacts on performance}
+\textit{\\3.e Input matrix size impacts on performance\\}
% environment
\begin{footnotesize}
Network & N2 : bw=1Gbs - lat=5E-05 \\ %\hline
Input matrix size & N$_{x}$ = From 40 to 200\\ \hline
\end{tabular}
+Table 5 : Input matrix size impact\\
+
\end{footnotesize}
-Table 5 : Input matrix size impact
\begin{figure} [ht!]
\centering
-\includegraphics[width=60mm]{pb_size_impact_on_execution_time.pdf}
+\includegraphics[width=100mm]{pb_size_impact_on_execution_time.pdf}
\caption{Pb size impact on execution time}
%\label{overflow}}
\end{figure}
deployment when focusing on the problem size scale up. Note that the
same test has been done with the grid 2x16 getting the same conclusion.
-\textit{3.f CPU Power impact on performance}
+\textit{\\3.f CPU Power impact on performance\\}
% environment
\begin{footnotesize}
Network & N2 : bw=1Gbs - lat=5E-05 \\ %\hline
Input matrix size & N$_{x}$ = 150 x 150 x 150\\ \hline
\end{tabular}
+Table 6 : CPU Power impact \\
+
\end{footnotesize}
-Table 6 : CPU Power impact
\begin{figure} [ht!]
\centering
-\includegraphics[width=60mm]{cpu_power_impact_on_execution_time.pdf}
+\includegraphics[width=100mm]{cpu_power_impact_on_execution_time.pdf}
\caption{CPU Power impact on execution time}
%\label{overflow}}
\end{figure}
classical GMRES time.
-The test conditions are summarized in the table below :
+The test conditions are summarized in the table below : \\
% environment
\begin{footnotesize}
Intra-Network & bw=1.25 Gbits - lat=5E-05 \\ %\hline
Inter-Network & bw=5 Mbits - lat=2E-02\\
Input matrix size & N$_{x}$ = From 62 to 150\\ %\hline
- Residual error precision: 10$^{-5}$ to 10$^{-9}$\\ \hline
+ Residual error precision: 10$^{-5}$ to 10$^{-9}$\\ \hline \\
\end{tabular}
\end{footnotesize}
